RFT
Test Result Report
Date:
To RF Technologies Ltd.
Applicant
Name of Corporation:
Position/Name of representative:
Signature
Examiner
Name of corporation
Position/Name of representative
Type of specified radio equipment
Model or name of specified radio equipment
Name of test operator
Qualification or condition of test operator
Test conducted date
Temperature/Humidity
Test conducted place
Measuring instruments used for test
Test method
Test items
Frequency
Occupied bandwidth
Intensity of spurious radiation
Antenna power
E.I.R.P.
Power leaking to adjacent channel or out of band
Power when carrier is not transmitted
Transmission rate
Limit of secondary radiated radio wave
Interference preventing function
Identifying symbol
Carrier sense function
Correlation signal sense function
Transmission burst length
Cordless handset talking function
Transmission antenna gain
Main radiation angle width of transmission antenna
Hopping frequency retention time
Radio wave pause function
Transmission time limit
General operation test
Signature
Radio equipment according to Certification
Ordinance Article 2 Section 1 No.
Select 1, 2, 3, 4, or 5, refer to Page2
See attached Test Report
Refer to Page2
□
□
□
□
□
□
□
□
□
□
□
□
□
□
□
□
□
□
□
□
□
Judgment
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
Pass □ Fail
See attached
Test Report
Appendix No. 3
1/2
RFT
1. Qualification and condition of personnel in charge of executing test
Personnel in charge of executing test shall have qualification or condition listed in the Radio Law
Appendix No. 4 or which Our Company recognizes to have knowledge and experience equivalent
to condition listed in the same table. Describe name, qualification or condition of personnel in
charge of executing test with reference to the following table.
○ Radio Law (related to Article 38, Section 3 and Article 38, Section 8)
1. Person who has completed education in radio communications in university (Excluding junior
college. Same in Paragraph 4.) according to the School Education Law or university according
to the previous University Decree (Royal Decree No. 388. 1918) and graduated, or person who
has a qualification of first class land radio professional engineer and experience of engaging in
testing work, adjustment or maintenance of radio equipment for at least three years.
2. Person who has completed education in radio communications in junior college or higher
technical school according to the School Education Law or professional school according to the
previous Professional School Decree (Royal Decree No. 61. 1903) and graduated, or person
who has a qualification of first class general wireless operator, first class marine wireless
operator or second class land radio professional engineer, and experience of engaging in
testing work, adjustment or maintenance of radio equipment for at least five years.
3. Person who has a certification that the person has a qualification, which was issued by a
foreign governmental organization, equivalent to the qualification listed in the previous
paragraph, and experience of engaging in testing work, adjustment or maintenance of radio
equipment for at least five years.
4. Person who has completed education in radio communications in a foreign school equivalent to
college according to the School Education Law and graduated, and has experience of
engaging in testing work, adjustment or maintenance of radio equipment for at least three
years.
5. Person who has completed education in radio communications in a foreign school equivalent to
a junior college or higher technical school according to the School Education Law and
graduated, and has experience of engaging in testing work, adjustment or maintenance of radio
equipment for at least five years.
2. Measuring instruments used for test
Name
Model
Name of
manufacturer
Calibrated
date
Name of calibrator
(who has performed
calibrations)
Appendix No. 3
2/2