Mari Muthu R rmaariece@gmail.com +919003493009 CAREER OBJECTIVE Seeking a challenging carrier in your esteemed organization where I can learn and grow dynamically as a person and as a professional along with the development of the firm. PROFESSIONAL PROFILE 1+ years experienced in Real Time Embedded System Development in Fuxen InfoTech. Exposure to Embedded C coding Proficiency in working with ARM, PIC, AVR microcontrollers. Basic Knowledge in RTOS concepts. Experienced in SPI, I2C, CAN interface. Excellent problem solving skills and self starter, smart working individual and team player Anything is Possible-Attitude TECHINICAL PROFICIENCY Microcontroller : ARM (LPC 2148), PIC ( 18F452), AVR (ATMEGA8) Languages : C, C++, Embedded C Tools : Keil , MP lab , AVR Studio Operating System : Windows, Linux, Android EMPLOYMENT HISTORY Organization : Fuxen InfoTech Duration : July 2011 to Sep 2012 (1.3 Years) Location : Chennai Project#1 INDUSTRIAL AUTOMATION USING CAN PROTOCOL (MOTOR SPEED CONTROL BASED ON TEMPERATURE) Tool : Keil, ARM (LPC2148) Language : Embedded C Description This project is designed to control the DC motor based on the temperature changes using CAN protocol implementation. This Project deals with the Control of DC Motor based upon the temperature changes that occur in a process in Industry. The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The Temperature changes are measured by the ADC and transmitted to the other node using the CAN Bus and the data is received at the other node based upon the data received the speed of the DC motor is Regulated using the PWM (pulse width Modulation) Technique. This PWM is achieved by on Chip Timers. Contribution UART programming to set the motor speed. PWM Wave is generated to run the motor. SPI programming to interface microcontroller with CAN. ADC programming to read the motor speed using IR Sensor and read temperature using LM35 Sensor. Depends upon measured temperature Master send controls message to Slave and motor speed controlled. Project#2 THE PARAMETRIC VOLTAGE MEASUREMENT SYSTEM Tool : AVR Studio, AT mega 8 Language : Embedded C Team Size :2 Client : IOCL Description This project consists of RISC based Microcontroller for monitoring the voltage and reporting it to the end user. The microcontroller measures the voltage and stores it in the internal memory. The microcontroller then fetches the data from the memory and sends it to the user through wireless technology. The unit also consists of noise filtering system which increases the reliability of the unit. Contribution: UART Programming to interface At mega 8L with GSM module Mobile numbers are stored in internal EPROM. Voltage read through ADC channel is transmitted to the GSM module through UART and then sent out to the stored mobile numbers through SMS. GSM data can be received from mobile phones and are used to change the controller default settings. Information sent to the GSM server is voltage, time and date, percentage of battery charge. CERTIFICATIONS PG Diploma in Embedded system and Design. windows Networking ACADEMIC SUMMARY Bachelor of Electronics and Communication Engineering from PET Engineering College in Nov 2011 with 66%. Board of Intermediate Education Tamil Nadu in March 2007 with 76.4%. Board of Secondary education Tamil Nadu in March 2005 with 86.6%. Project: FPGA BASED DESIGN OF CDMA MATCHED FILTER FOR MULTI USER DETECTION. Organization : Anna University Tirunelveli. Techniques : DSSS\DS-CDMA, MMSE Detector, Matched Filter. Tool : Xilinx ISE8.1i Language : VHDL Description CDMA is a technique used for wireless data transmission. Every mobile handset and every wireless base station operate on the same frequency spectrum. In order to discriminate one conversation from another, every handset broadcasts a unique code sequence. CDMA base stations must be able to discriminate these different code sequences in order to distinguish one transmission from another. This discrimination is accomplished by means of a matched filter, whose output indicates when a particular code sequence is detected in the input data stream. This application note includes a reference design (HDL code) for implementing parallel matched filters. PERSONAL PROFILE Name : R.MariMuthu. Father’s Name : R.Rajagopal. Nationality : Indian. Date of Birth : 26-oct-1989. Hobbies : Surfing internet, making new friends, Roaming with friends. PAN Card : BSYPM2836D Languages Known : Tamil and English. DECLARATION I do hereby confirm that the information furnished above its true to best of my knowledge and belief. (R.MARI MUTHU)