Construction ID – EPS-20G
Engineered wooden floor (floating)
Direct installation
System IDEAL EPS 240 kPa
1,5 kN/m²
1
T&G engineered timber
≤20mm
2
UFH compatible underlay
3mm
3
JUPITER IDEAL EPS
30mm
4
Perimeter support batten
5
Perimeter insulation
1
2
5
3
4
6
Intermediate supporting ply
7
Primary insulation i.e. Kingspan
6
7
98-148 mm +
Technical Data
Construction suitable for floors with significant heat loss below
Construction height**
mm
98-148
Height without floor finish
Weight**
kg/m²
15-17
Weight without floor finish
Thermal resistance R*
m²K/W
3,379
Heat exchange coefficient
W/m²K
0,17-0,21
Uniform Distributed Load (UDL)
kN/m²
1,5
Point load (≥ 20cm²)
kN
1,0
Impact sound reduction
dB
-
Area of application
* Based on 50-100mm Kingspan Kooltherm K3
** Based on Kingspan Kooltherm K3 and the additional properties of the
JUPITER IDEAL 30mm element. The resistance does not include for
thermal resistance offered by the ground conditions.
Ground floors or floors
located above unheated
rooms such as garages,
basements etc.
20°C
t: 0044 (0) 1276 859066
Construction height
18mm
Installation information
Substrate must be solid, level and flat so that the heating elements can lie
flat. Tolerance required as per DIN 18202 table 3, group 4.
Construction tested with Kingspan Kooltherm K3 ≤ 100mm
Working in conjunction with
© jupiterunderfloorheating.com
For upper floor installation see construction EPS-50U.