Forged Vessel Connections an AMERI-FORGE GROUP company MAILING ADDRESS: P. O. Box 38421 Houston, TX 77238-8421 MAIN PLANT, DOMESTIC AND INTERNATIONAL SALES OFFICES: 2525 DeSoto St. Houston, TX 77091 1-800-231-2701 1-713-688-9705 FAX: 1-713-688-7954 FAX: 1-713-688-7518 FAX: 1-713-688-1846 WEB PAGE: http://www.fvc.cc E-MAIL: sales@fvc.cc CANADA OPERATIONS: WESTERN CANADIAN SALES & DISTRIBUTION 7410A-5 Street S.E. Calgary, Alberta T2H-2L9 1-800-382-3490 1-403-255-9011 FAX: 1-403-255-7239 E-MAIL: wcanada@fvc.cc Pressure Vessel Connections • Long Welding Necks • Heavy Barrel Type HB Necks • Variable Body Type V1, V2, V3 Necks • Full Body Type F Necks • Studding Outlets • Custom Products • Rough Forgings • Insert Type “Q” Nozzles Table of Contents Introduction to FVC .................................................................................. 4 FVC Standard and Variable Body Connections ......................................... 7 Introduction to Seamless Construction ................................................. 8 LWN, HB, F, V1, V2, and V3: Class 150 ....................................................................................... 12 Class 300 ....................................................................................... 16 Class 400 ....................................................................................... 20 Class 600 ....................................................................................... 24 Class 900 ....................................................................................... 28 Class 1500 ..................................................................................... 32 Class 2500 ..................................................................................... 36 General Notes for FVC Connections .................................................... 40 FVC Studding Outlets ............................................................................. 41 Introduction to Studding Outlets ........................................................ 42 Class 150 ....................................................................................... 44 Class 300 ....................................................................................... 45 Class 600 ....................................................................................... 46 Class 900 ....................................................................................... 47 Class 1500 ..................................................................................... 48 Class 2500 ..................................................................................... 49 General Notes for FVC Studding Outlets ............................................ 50 FVC Custom Products ............................................................................. 53 Introduction to FVC Custom Product Capabilities................................ 54 Technical Section .................................................................................... 57 Technical Table of Contents .................................................................... 58 Warranty and Terms............................................................................... 80 Standard and Variable Forged Vessel Connections, Body Inc. Connections Seamless Construction Consider All That is Involved in Built-Up Construction of Connections: The large family of FVC standard seamless one-piece construction connections eliminates the need for you to use a pipe/flange/reinforcement pad “built-up” construction nozzle. This removes the fabrication and material traceability problems which plague fabricators using “built-up” nozzles. 8 Seamless Construction Then Choose FVC Evaluate a few of the advantages provided by FVC integrally reinforced standard connections: 1) Contour forged close to the finished profile for aligned grain flow of material, resulting in maximum strength and toughness. 2) Less possibility of distortion from heat of welding. 3) Reduction of total time required for vessel fabrication, therefore speeding up delivery and cash flow of each job. 4) Easier traceability of material, only one piece vs. two or more pieces required for “built-up” construction — many times test certificates can be a large additional hidden cost. 5) “Ready to install” convenience. 6) Larger manway bore diameters — when a 16-inch I.D. is required you only pay for a 16-inch FVC nozzle and 16-inch mating components, but if you use a “built-up” construction you pay for an 18-inch weld neck flange, 18inch pipe and an 18-inch blind. Therefore you save by not paying for the larger blind flange gasket as well as the larger or more nuts and studs associated with “built-up” nozzles, For larger minimum I.D.’s the savings become even greater. 7) Integral reinforcement lowers overall fabrication cost by reducing or eliminating the cost in the following areas: (A) Purchasing and Expediting: One part vs. pipe, flange, and plate. (B) Material Handling: One piece to unload, stock, and move to shop for final installation. (C) Inventory Control: Fewer parts to stock, trace, and locate on plant site. (D) Production Scheduling: FVC Seamless Schedule System of “Reduce & Eliminate” saves time and money… 1) 2) 3) 4) Department Layout Burning Fitting Welding 5) Grinding 6) Testing Fabrication Process Layout of reinforcing pad Pipe & pad Sub-assembly fitting pipe, flange, & pad Sub-assembly welding pipe & flange Main bay welding of pad Neck-to-shell or head weld Grinding pipe to flange weld Grinding pad OD weld X-Ray of pipe to flange weld U/T, MP & air test of pad Neck-to-vessel joint repairs Integral Reinforcement… Scheduled Time Eliminated Eliminated Eliminated Eliminated Eliminated Reduced Eliminated Eliminated Eliminated Eliminated Reduced (E) Quality Control: Time spent verifying all the material certifications, testing procedures, vendor compliance, accompanying customer inspectors witnessing testing and vendor certificates is reduced. (F) Sales & Marketing: The on-time shipment and the aesthetic appeal of a vessel fabricated using FVC seamless connections creates an atmosphere which “Reduces” the sales effort required to obtain the next order from your customer. Compound these advantages with other disadvantages of “built-up” construction and it is easy to see why FVC standard seamless connections should be used for all of your flanged nozzle requirements. 9 Seamless Construction FVC Offers Largest Variety of Standard Connections FVC flanged connections are available in a large variety of standard barrel thicknesses. These styles include the FVC LWN, the HB, the Variable Body Connections Vl, V2 and V3 and the F connections. This wide variety of standard barrel thicknesses was developed in order to provide a FVC standard product that fulfills your individual reinforcement applications. All FVC standard flanged connections are: 1) Seamless forged construction. 2) Manufactured in strict accordance with ASME Sec. VIII, Div. 1. 3) Manufactured in all of the sizes and pressure classes covered by ASME B16.5. 4) Manufactured and stocked in SA-105, SA-350-LF2, SA-182-F1, SA-182-F11, SA-182-F304(L), and SA-182-F316(L). Other materials can be provided, see page 59. The following describes the variety of standard connections offered by FVC, progressing from the thinnest standard neck to the thickest standard connection: The FVC Type “LWN” — “Long Welding Neck” The “LWN” is FVC’s basic standard flanged connection. This seamless product offers a nominal bore as well as a heavy wall thickness, making it ideal for highly corrosive applications. The FVC Type “HB” Neck — “Heavy Barrel” The “HB” neck furnishes more integral reinforcement than the corresponding size FVC “LWN” which is accomplished with a thicker barrel neck section. There are additional features on this style neck: 1) On FVC “HB” necks an automatic “nut stop” is provided by the standard barrel O.D. This eliminates the need for a second holding wrench. An optional “nut relief” in the barrel will allow two wrench operation. 2) FVC “HB” necks, sizes 12 inch and below are furnished with Sch 80 bores. Manway sizes 14 inch and above have bores equal to the nominal size. The FVC Type “F” Nozzle — “Full Body” The FVC Type “F” body connection provides the most reinforcement among the standard connections. The barrel O.D. is the same as the flange O.D. 10 Seamless Construction Variable Body Connections The FVC Type “V” Nozzle — “Variable Body” Never before has a manufacturer offered so many standard barrel thicknesses in seamless connections. This variety enables FVC to provide a sufficient amount of integral reinforcement required while keeping nozzle weight and cost down to a minimum. Don’t compromise with an expensive “custom” forging when you can find the required barrel diameter in the standard FVC “Variable Body” charts on the following pages. The FVC “Variable Body” connections provide more integral reinforcement than an “HB” neck, without the added cost of a custom forging or the added cost and weight of an “F” connection. Optional Features All FVC connections are available with the following optional features: 1) contoured bottoms: “cylindrical”, “spherical,” or “hillside”. 2) special lengths, longer or shorter than the standard lengths listed in the price list are no problem for FVC. 3) insert lips, contour forged or contour machined. 4) additional facings, standard B16.5 or custom designs. 5) “nut stop” barrel, (except on LWN’S). 6) optional Barrel O.D. and I.D. 7) FVC can also make LWNs, HBs, Variable Body Nozzles, and F Nozzles to ASME B16.47 Series A and Series B. Don’t Compromise If your reinforcement requirements cannot be met with these standard FVC products, please see the “Custom Products” section, pages 53-56, for additional FVC special capabilities. 11 CLASS 150 Size ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 FVC Standard Connections Flange Flange O.D. Thick. Bore Barrel O.D. RF O.D. Bolt Holes Hole Size Bolt Circle LWN/F HB LWN HB F O T R - - C B B D D D 3.50 3.88 4.25 4.62 5.00 6.00 7.00 7.50 8.50 9.00 10.00 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50 32.00 0.44 0.50 0.56 0.62 0.69 0.75 0.88 0.94 0.94 0.94 0.94 1.00 1.12 1.19 1.25 1.38 1.44 1.56 1.69 1.88 1.38 1.69 2.00 2.50 2.88 3.62 4.12 5.00 5.50 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 4 4 4 4 4 4 8 8 8 8 8 12 12 12 16 16 20 20 0.62 0.62 0.62 0.62 0.62 0.75 0.75 0.75 0.75 0.75 0.88 0.88 0.88 1.00 1.00 1.12 1.12 1.25 1.25 1.38 2.38 2.75 3.12 3.50 3.88 4.75 5.50 6.00 7.00 7.50 8.50 9.50 11.75 14.25 17.00 18.75 21.25 22.75 25.00 29.50 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 0.55 0.74 0.96 1.28 1.50 1.94 2.32 2.90 3.36 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 1.25 1.62 2.00 2.38 2.62 3.06 3.75 4.25 4.88 5.50 6.50 7.75 9.75 12.00 14.38 16.00 18.00 20.00 22.00 26.25 1.50 1.88 2.25 2.62 3.00 3.69 4.44 4.94 5.94 6.44 7.25 8.25 10.50 12.81 15.56 17.12 19.62 20.94 23.19 27.50 3.50 3.88 4.25 4.63 5.00 6.00 7.00 7.50 8.50 9.00 10.00 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50 32.00 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” includes 0.06 inch raised face per ASME B16.5. This differs on Class 400 and above. FVC can supply any special facing as needed upon request. 12 Notes continued on following page. CLASS 150 FVC Standard Connections DON’T COMPROMISE! If your reinforcement requirements are in between the “HB” and “F” connections see the following page for Class 150 FVC Variable Body Connections Size ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 Neck Thickness Nut Nut Nut Stop Relief Relief HB F Dia. Dia. Lngth. LWN NS NR NL N N N 1.50 1.88 2.25 2.62 3.00 3.69 4.44 4.94 5.94 6.44 7.25 8.25 10.50 12.81 15.56 17.12 19.62 20.94 23.19 27.50 1.25 1.62 2.00 2.38 2.62 3.06 3.75 4.25 4.88 5.50 6.50 7.75 9.75 12.00 14.38 16.00 18.00 20.00 22.00 26.25 0.75 0.75 0.75 0.75 0.75 0.88 0.88 0.88 0.88 0.88 1.00 1.00 1.00 1.12 1.12 1.25 1.25 1.38 1.38 1.50 0.38 0.44 0.50 0.56 0.56 0.53 0.62 0.62 0.69 0.75 0.75 0.88 0.88 1.00 1.19 1.00 1.00 1.00 1.00 1.12 0.48 0.57 0.65 0.67 0.75 0.88 1.06 1.02 1.29 1.31 1.22 1.25 1.44 1.63 2.09 1.56 1.81 1.47 1.60 1.75 1.50 1.56 1.62 1.69 1.75 2.00 2.25 2.25 2.50 2.50 2.50 2.50 2.75 3.00 3.50 3.50 3.75 3.50 3.75 4.00 Weights LWN HB F Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 3 5 7 10 12 15 22 25 32 47 57 75 102 143 205 211 246 270 311 423 0.3 0.5 0.7 0.9 1.0 1.2 1.7 2.0 2.6 3.2 3.8 5.4 6.9 9.8 14 13 15 17 19 25 5 7 10 12 16 23 34 38 55 78 87 103 157 214 329 296 388 362 434 574 0.4 0.7 0.9 1.2 1.5 2.2 3.2 3.6 5.3 6.0 6.5 7.8 11 16 25 22 29 25 31 40 21 27 30 36 41 57 79 86 110 164 189 216 292 382 535 585 714 711 840 1046 2.7 3.2 3.8 4.4 5.1 7.1 10 11 13 14 17 19 26 35 48 55 66 67 79 100 Base Wt. Lngth. 9 9 9 9 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 12 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 13 CLASS 150 Size 1 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 FVC Variable Body Connections Barrel O.D. Flange O.D. Flange Thick. RF O.D. Bolt Holes Hole Size Bolt Circle Bore V1 V2 V3 O T R - - C B DV1 DV2 DV3 4.25 5.00 6.00 7.00 7.50 8.50 9.00 10.00 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50 32.00 0.56 0.69 0.75 0.88 0.94 0.94 0.94 0.94 1.00 1.12 1.19 1.25 1.38 1.44 1.56 1.69 1.88 2.00 2.88 3.62 4.12 5.00 5.50 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 4 4 4 8 8 8 8 8 12 12 12 16 16 20 20 0.62 0.62 0.75 0.75 0.75 0.75 0.75 0.88 0.88 0.88 1.00 1.00 1.12 1.12 1.25 1.25 1.38 3.12 3.88 4.75 5.50 6.00 7.00 7.50 8.50 9.50 11.75 14.25 17.00 18.75 21.25 22.75 25.00 29.50 0.96 1.50 1.94 2.32 2.90 3.36 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 2.75 3.25 4.00 4.62 5.75 6.38 7.00 7.75 8.88 11.00 13.50 16.25 18.25 20.12 22.25 24.12 27.75 3.25 4.00 4.62 5.75 6.00 7.00 7.75 8.25 9.88 11.50 14.25 17.38 19.38 21.00 23.25 25.00 29.25 4.00 4.62 5.50 6.00 6.38 7.75 8.25 8.88 10.38 12.12 15.12 18.25 20.12 22.25 24.12 26.25 30.75 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” includes 0.06 inch raised face per ASME B16.5. This differs on Class 400 and above. FVC can supply any special facing as needed upon request. Notes continued on following page. 14 CLASS 150 FVC Variable Body Connections DON’T COMPROMISE! If your reinforcement requirements have not been met with these standard FVC connections, please see “Custom Products”, pages 54 to 56. Size 1 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 Nut Nut Nut Stop Relief Relief Dia. Dia. Lngth. Neck Thickness V1 V2 V3 NS NR NL N N N 2.25 3.00 3.69 4.44 4.94 5.94 6.44 7.25 8.25 10.50 12.81 15.56 17.12 19.62 20.94 23.19 27.50 2.00 2.62 3.06 3.75 4.25 4.88 5.50 6.50 7.75 9.75 12.00 14.38 16.00 18.00 20.00 22.00 26.25 0.75 0.75 0.88 0.88 0.88 0.88 0.88 1.00 1.00 1.00 1.12 1.12 1.25 1.25 1.38 1.38 1.50 0.90 0.88 1.03 1.15 1.43 1.51 1.59 1.47 1.56 1.69 1.97 2.44 2.13 2.06 2.13 2.06 1.88 1.15 1.25 1.34 1.72 1.55 1.82 1.96 1.72 2.06 1.94 2.35 3.00 2.69 2.50 2.63 2.50 2.63 1.52 1.56 1.78 1.84 1.74 2.20 2.21 2.04 2.31 2.25 2.78 3.44 3.06 3.13 3.06 3.13 3.38 Weights V1 V2 V3 Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 26 37 48 73 75 102 119 121 167 205 399 606 622 666 751 804 1007 38 49 67 81 85 126 137 144 188 236 474 696 705 820 864 978 1246 19 25 35 48 69 83 95 104 126 180 337 494 501 562 624 684 772 1.5 1.9 2.7 3.5 5.5 7 8 8 10 14 20 30 31 33 38 41 43 2.2 3.1 3.9 6 6 8 10 10 14 17 25 38 40 41 48 50 62 3.4 4.3 5.9 7 7 11 12 12 17 20 31 45 47 53 57 64 82 Base Wt. Lngth. 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 15 CLASS 300 Size ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 FVC Standard Connections Flange Flange O.D. Thick. Bore Barrel O.D. RF O.D. Bolt Holes Hole Size Bolt Circle LWN/F HB LWN HB F O T R - - C B B D D D 3.75 4.62 4.88 5.25 6.12 6.50 7.50 8.25 9.00 10.00 11.00 12.50 15.00 17.50 20.50 23.00 25.50 28.00 30.50 36.00 0.56 0.62 0.69 0.75 0.81 0.88 1.00 1.12 1.19 1.25 1.38 1.44 1.62 1.88 2.00 2.12 2.25 2.38 2.50 2.75 1.38 1.69 2.00 2.50 2.88 3.62 4.12 5.00 5.50 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 4 4 4 8 8 8 8 8 8 12 12 16 16 20 20 24 24 24 0.62 0.75 0.75 0.75 0.88 0.75 0.88 0.88 0.88 0.88 0.88 0.88 1.00 1.12 1.25 1.25 1.38 1.38 1.38 1.62 2.62 3.25 3.50 3.88 4.50 5.00 5.88 6.62 7.25 7.88 9.25 10.62 13.00 15.25 17.75 20.25 22.50 24.75 27.00 32.00 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 0.55 0.74 0.96 1.28 1.50 1.94 2.32 2.90 3.36 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 1.50 1.88 2.12 2.50 2.75 3.31 3.94 4.62 5.25 5.75 7.00 8.12 10.25 12.62 14.75 16.75 19.00 21.00 23.12 27.62 1.75 2.19 2.44 2.81 3.25 3.94 4.62 5.38 6.00 6.62 8.00 9.38 11.56 13.62 15.94 18.44 20.50 22.75 25.00 29.62 3.75 4.62 4.88 5.25 6.12 6.50 7.50 8.25 9.00 10.00 11.00 12.50 15.00 17.50 20.50 23.00 25.50 28.00 30.50 36.00 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” includes 0.06 inch raised face per ASME B16.5. This differs on Class 400 and above. FVC can supply any special facing as needed upon request. 16 Notes continued on following page. CLASS 300 FVC Standard Connections DON’T COMPROMISE! If your reinforcement requirements are in between the “HB” and “F” connections see the following page for Class 300 FVC Variable Body Connections Size ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 Neck Thickness Nut Nut Nut Stop Relief Relief HB F Dia. Dia. Lngth. LWN NS NR NL N N N 1.75 2.19 2.44 2.81 3.25 3.94 4.62 5.38 6.00 6.62 8.00 9.38 11.56 13.62 15.94 18.44 20.50 22.75 25.00 29.62 1.50 1.88 2.12 2.50 2.75 3.31 3.94 4.62 5.25 5.75 7.00 8.12 10.25 12.62 14.75 16.75 19.00 21.00 23.12 27.62 0.75 0.88 0.88 0.88 1.00 0.88 1.00 1.00 1.00 1.00 1.00 1.00 1.12 1.25 1.38 1.38 1.50 1.50 1.50 1.75 0.50 0.57 0.56 0.63 0.63 0.66 0.72 0.81 0.88 0.88 1.00 1.06 1.13 1.31 1.38 1.38 1.50 1.50 1.56 1.81 0.60 0.73 0.74 0.77 0.88 1.00 1.15 1.24 1.32 1.40 1.60 1.81 1.97 2.03 2.28 2.22 2.25 2.38 2.50 2.81 1.63 1.94 1.94 2.00 2.31 2.25 2.50 2.63 2.75 3.00 3.00 3.25 3.50 3.75 4.25 4.50 4.75 5.00 5.25 6.00 Weights LWN HB F Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 7 11 12 15 21 28 38 49 59 91 124 165 228 291 392 456 529 630 741 1016 24 37 40 45 61 68 89 106 122 207 241 303 405 499 651 785 914 1066 1228 1627 5 9 9 13 15 20 25 35 42 62 84 105 148 210 275 324 404 465 549 778 0.4 0.7 0.8 1.0 1.2 1.5 2.1 2.7 3.4 3.8 5.3 6.7 9.1 13 16 19 23 26 30 42 0.6 0.9 1.1 1.4 1.9 2.6 3.6 4.6 5.5 6.5 9.1 12 17 21 28 32 37 43 50 67 3.1 4.6 5.1 5.8 7.8 8.5 11 13 15 19 21 27 36 46 61 74 88 102 118 160 Base Wt. Lngth. 9 9 9 9 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 12 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 17 CLASS 300 Size 1 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 FVC Variable Body Connections Barrel O.D. Flange O.D. Flange Thick. RF O.D. Bolt Holes Hole Size Bolt Circle Bore V1 V2 V3 O T R - - C B DV1 DV2 DV3 4.88 6.12 6.50 7.50 8.25 9.00 10.00 11.00 12.50 15.00 17.50 20.50 23.00 25.50 28.00 30.50 36.00 0.69 0.81 0.88 1.00 1.12 1.19 1.25 1.38 1.44 1.62 1.88 2.00 2.12 2.25 2.38 2.50 2.75 2.00 2.88 3.62 4.12 5.00 5.50 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 8 8 8 8 8 8 12 12 16 16 20 20 24 24 24 0.75 0.88 0.75 0.88 0.88 0.88 0.88 0.88 0.88 1.00 1.12 1.25 1.25 1.38 1.38 1.38 1.62 3.50 4.50 5.00 5.88 6.62 7.25 7.88 9.25 10.62 13.00 15.25 17.75 20.25 22.50 24.75 27.00 32.00 0.96 1.50 1.94 2.32 2.90 3.36 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 2.75 4.00 4.62 5.75 6.00 7.00 7.00 8.25 9.88 12.12 14.25 16.25 19.38 22.25 24.12 26.75 30.75 3.75 4.62 5.50 6.00 6.38 7.75 7.75 8.88 10.38 13.50 15.12 17.38 20.12 23.25 25.12 27.75 32.00 4.00 5.50 6.00 6.38 7.00 8.25 8.88 9.88 11.00 14.25 16.25 18.25 22.25 24.12 26.75 29.25 33.62 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” includes 0.06 inch raised face per ASME B16.5. This differs on Class 400 and above. FVC can supply any special facing as needed upon request. Notes continued on following page. 18 CLASS 300 FVC Variable Body Connections DON’T COMPROMISE! If your reinforcement requirements have not been met with these standard FVC connections, please see “Custom Products”, pages 54 to 56. Size 1 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 Nut Nut Nut Stop Relief Relief Dia. Dia. Lngth. Neck Thickness V1 V2 V3 NS NR NL N N N 2.44 3.25 3.94 4.62 5.38 6.00 6.62 8.00 9.38 11.56 13.62 15.94 18.44 20.50 22.75 25.00 29.62 2.12 2.75 3.31 3.94 4.62 5.25 5.75 7.00 8.12 10.25 12.62 14.75 16.75 19.00 21.00 23.12 27.62 0.88 1.00 0.88 1.00 1.00 1.00 1.00 1.00 1.00 1.12 1.25 1.38 1.38 1.50 1.50 1.50 1.75 0.90 1.25 1.34 1.72 1.55 1.82 1.59 1.72 2.06 2.25 2.35 2.44 2.69 3.13 3.06 3.38 3.38 1.40 1.56 1.78 1.84 1.74 2.20 1.96 2.04 2.31 2.94 2.78 3.00 3.06 3.63 3.56 3.88 4.00 1.52 2.00 2.03 2.03 2.05 2.45 2.52 2.54 2.62 3.32 3.35 3.44 4.13 4.06 4.38 4.63 4.81 Weights V1 V2 V3 Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 20 39 49 72 78 104 102 133 185 255 425 532 681 877 982 1176 1455 34 51 69 80 88 127 125 155 206 324 498 636 761 988 1102 1316 1647 39 70 81 90 106 144 164 194 233 364 591 720 996 1099 1314 1525 1899 1.5 3.1 3.9 6.2 6.1 8.4 7.6 10 14 20 25 30 40 53 57 70 82 2.9 4.3 5.9 6.8 7.2 11 10 12 17 28 31 38 47 63 68 82 100 3.4 6.2 7.2 7.8 9 13 14 17 20 32 38 45 67 73 87 101 123 Base Wt. Lngth. 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 19 CLASS 400 Size ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 FVC Standard Connections Flange Flange O.D. Thick. Bore Barrel O.D. RF O.D. Bolt Holes Hole Size Bolt Circle LWN/F HB LWN HB F O T R - - C B B D D D 3.75 4.62 4.88 5.25 6.12 6.50 7.50 8.25 9.00 10.00 11.00 12.50 15.00 17.50 20.50 23.00 25.50 28.00 30.50 36.00 0.56 0.62 0.69 0.81 0.88 1.00 1.12 1.25 1.38 1.38 1.50 1.62 1.88 2.12 2.25 2.38 2.50 2.62 2.75 3.00 1.38 1.69 2.00 2.50 2.88 3.62 4.12 5.00 5.50 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 4 4 4 8 8 8 8 8 8 12 12 16 16 20 20 24 24 24 0.62 0.75 0.75 0.75 0.88 0.75 0.88 0.88 1.00 1.00 1.00 1.00 1.12 1.25 1.38 1.38 1.50 1.50 1.62 1.88 2.62 3.25 3.50 3.88 4.50 5.00 5.88 6.62 7.25 7.88 9.25 10.62 13.00 15.25 17.75 20.25 22.50 24.75 27.00 32.00 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 0.55 0.74 0.96 1.28 1.50 1.94 2.32 2.90 3.36 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 1.50 1.88 2.12 2.50 2.75 3.31 3.94 4.62 5.25 5.75 7.00 8.12 10.25 12.62 14.75 16.75 19.00 21.00 23.12 27.62 1.75 2.19 2.44 2.81 3.25 3.94 4.62 5.38 5.81 6.44 7.81 9.19 11.38 13.44 15.75 18.25 20.31 22.56 24.63 29.25 3.75 4.62 4.88 5.25 6.12 6.50 7.50 8.25 9.00 10.00 11.00 12.50 15.00 17.50 20.50 23.00 25.50 28.00 30.50 36.00 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. 20 Notes continued on following page. CLASS 400 FVC Standard Connections DON’T COMPROMISE! If your reinforcement requirements are in between the “HB” and “F” connections see the following page for Class 400 FVC Variable Body Connections Size ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 Neck Thickness Nut Nut Nut Stop Relief Relief HB F Dia. Dia. Lngth. LWN NS NR NL N N N 1.75 2.19 2.44 2.81 3.25 3.94 4.62 5.38 5.81 6.44 7.81 9.19 11.38 13.44 15.75 18.25 20.31 22.56 24.63 29.25 1.50 1.88 2.12 2.50 2.75 3.31 3.94 4.62 5.25 5.75 7.00 8.12 10.25 12.62 14.75 16.75 19.00 21.00 23.12 27.62 0.75 0.88 0.88 0.88 1.00 0.88 1.00 1.00 1.12 1.12 1.12 1.12 1.25 1.38 1.50 1.50 1.62 1.62 1.75 2.00 0.50 0.57 0.56 0.63 0.63 0.66 0.72 0.81 0.88 0.88 1.00 1.06 1.13 1.31 1.38 1.38 1.50 1.50 1.56 1.81 0.60 0.73 0.74 0.77 0.88 1.00 1.15 1.24 1.23 1.31 1.50 1.72 1.88 1.94 2.19 2.13 2.16 2.28 2.32 2.63 1.63 1.94 1.94 2.00 2.31 2.25 2.50 2.63 2.75 3.00 3.00 3.25 3.50 3.75 4.25 4.50 4.75 5.00 5.25 6.00 Weights LWN HB F Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 7 11 12 15 21 29 39 50 61 93 127 169 233 298 401 467 542 645 759 1040 24 37 40 45 61 68 88 104 116 197 229 286 379 475 627 758 884 1033 1165 1540 5 8 9 13 16 20 27 36 45 65 88 110 154 218 285 336 418 482 568 804 0.4 0.7 0.8 1.0 1.2 1.5 2.1 2.7 3.4 3.8 5.3 6.7 9.1 13 16 19 23 26 30 42 0.6 0.9 1.1 1.4 1.9 2.6 3.6 4.6 5.5 6.5 9.1 12 17 21 28 32 37 43 50 67 3.1 4.6 5.1 5.8 7.8 8.5 11 13 15 19 22 27 36 46 62 74 88 102 118 160 Base Wt. Lngth. 9 9 9 9 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 12 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 21 CLASS 400 Size 1 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 FVC Variable Body Connections Barrel O.D. Flange O.D. Flange Thick. RF O.D. Bolt Holes Hole Size Bolt Circle Bore V1 V2 V3 O T R - - C B DV1 DV2 DV3 4.88 6.12 6.50 7.50 8.25 9.00 10.00 11.00 12.50 15.00 17.50 20.50 23.00 25.50 28.00 30.50 36.00 0.69 0.88 1.00 1.13 1.25 1.38 1.38 1.50 1.62 1.88 2.12 2.25 2.38 2.50 2.62 2.75 3.00 2.00 2.88 3.62 4.12 5.00 5.50 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 8 8 8 8 8 8 12 12 16 16 20 20 24 24 24 0.75 0.88 0.75 0.88 0.88 1.00 1.00 1.00 1.00 1.12 1.25 1.38 1.38 1.50 1.50 1.62 1.88 3.50 4.50 5.00 5.88 6.62 7.25 7.88 9.25 10.62 13.00 15.25 17.75 20.25 22.50 24.75 27.00 32.00 0.96 1.50 1.94 2.32 2.90 3.36 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 2.75 4.00 4.62 5.75 6.00 7.00 7.00 8.25 9.88 12.12 14.25 16.25 19.38 22.25 24.12 26.75 30.75 3.25 4.62 5.50 6.00 6.38 7.75 7.75 8.88 10.38 13.50 15.12 17.38 20.12 23.25 25.12 27.75 32.00 4.00 5.50 6.00 6.38 7.00 8.25 8.88 9.88 11.00 14.25 16.25 18.25 22.25 24.12 26.75 29.25 33.62 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. Notes continued on following page. 22 CLASS 400 FVC Variable Body Connections DON’T COMPROMISE! If your reinforcement requirements have not been met with these standard FVC connections, please see “Custom Products”, pages 54 to 56. Size 1 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 Nut Nut Nut Stop Relief Relief Dia. Dia. Lngth. Neck Thickness V1 V2 V3 NS NR NL N N N 2.44 3.25 3.94 4.62 5.38 5.81 6.44 7.81 9.19 11.38 13.44 15.75 18.25 20.31 22.56 24.63 29.25 2.12 2.75 3.31 3.94 4.62 5.25 5.75 7.00 8.12 10.25 12.62 14.75 16.75 19.00 21.00 23.12 27.62 0.88 1.00 0.88 1.00 1.00 1.12 1.12 1.12 1.12 1.25 1.38 1.50 1.50 1.62 1.62 1.75 2.00 0.90 1.25 1.34 1.72 1.55 1.82 1.59 1.72 2.06 2.25 2.35 2.44 2.69 3.12 3.06 3.38 3.38 1.15 1.56 1.78 1.84 1.74 2.20 1.96 2.04 2.31 2.94 2.78 3.00 3.06 3.63 3.56 3.88 4.00 1.52 2.00 2.03 2.03 2.05 2.45 2.53 2.54 2.62 3.31 3.35 3.44 4.13 4.06 4.38 4.63 4.81 Weights V1 V2 V3 Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 20 39 49 73 79 106 104 135 188 259 431 539 690 887 982 1176 1437 27 51 69 81 89 128 126 157 208 327 502 641 768 980 1102 1283 1614 39 69 95 90 106 145 165 195 235 366 594 724 974 1078 1284 1476 1844 1.5 3.1 3.9 6.2 6.1 8.4 7.6 10 14 20 25 30 40 53 57 70 82 2.2 4.3 5.9 6.8 7.2 11 10 12 17 28 31 38 47 63 68 82 100 3.4 6.2 8.9 7.8 9 13 14 17 20 32 38 45 67 73 87 101 123 Base Wt. Lngth. 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 23 CLASS 600 Size ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 FVC Standard Connections Flange Flange O.D. Thick. Bore Barrel O.D. RF O.D. Bolt Holes Hole Size Bolt Circle LWN/F HB LWN HB F O T R - - C B B D D D 3.75 4.62 4.88 5.25 6.12 6.50 7.50 8.25 9.00 10.75 13.00 14.00 16.50 20.00 22.00 23.75 27.00 29.25 32.00 37.00 0.56 0.62 0.69 0.81 0.88 1.00 1.12 1.25 1.38 1.50 1.75 1.88 2.19 2.50 2.62 2.75 3.00 3.25 3.50 4.00 1.38 1.69 2.00 2.50 2.88 3.62 4.12 5.00 5.50 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 4 4 4 8 8 8 8 8 8 12 12 16 20 20 20 20 24 24 0.62 0.75 0.75 0.75 0.88 0.75 0.88 0.88 1.00 1.00 1.12 1.12 1.25 1.38 1.38 1.50 1.62 1.75 1.75 2.00 2.62 3.25 3.50 3.88 4.50 5.00 5.88 6.62 7.25 8.50 10.50 11.50 13.75 17.00 19.25 20.75 23.75 25.75 28.50 33.00 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 0.55 0.74 0.96 1.28 1.50 1.94 2.32 2.90 3.36 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 1.50 1.88 2.12 2.50 2.75 3.31 3.94 4.62 5.25 6.00 7.50 8.75 10.75 13.50 15.75 17.00 19.50 21.50 24.00 28.25 1.75 2.19 2.44 2.81 3.25 3.94 4.62 5.38 5.81 7.06 8.88 9.88 11.94 15.00 17.25 18.56 21.38 23.19 25.94 30.06 3.75 4.62 4.88 5.25 6.12 6.50 7.50 8.25 9.00 10.75 13.00 14.00 16.50 20.00 22.00 23.75 27.00 29.25 32.00 37.00 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. 24 Notes continued on following page. CLASS 600 FVC Standard Connections DON’T COMPROMISE! If your reinforcement requirements are in between the “HB” and “F” connections see the following page for Class 600 FVC Variable Body Connections Size ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 Neck Thickness Nut Nut Nut Stop Relief Relief HB F Dia. Dia. Lngth. LWN NS NR NL N N N 1.75 2.19 2.44 2.81 3.25 3.94 4.62 5.38 5.81 7.06 8.88 9.88 11.94 15.00 17.25 18.56 21.38 23.19 25.94 30.06 1.50 1.88 2.12 2.50 2.75 3.31 3.94 4.62 5.25 6.00 7.50 8.75 10.75 13.50 15.75 17.00 19.50 21.50 24.00 28.25 0.75 0.88 0.88 0.88 1.00 0.88 1.00 1.00 1.12 1.13 1.25 1.25 1.38 1.50 1.50 1.62 1.75 1.88 1.88 2.12 0.50 0.57 0.56 0.63 0.63 0.66 0.72 0.81 0.88 1.00 1.25 1.38 1.38 1.75 1.88 1.50 1.75 1.75 2.00 2.13 0.60 0.73 0.74 0.77 0.88 1.00 1.15 1.24 1.23 1.62 2.04 2.06 2.16 2.72 2.94 2.28 2.69 2.60 2.97 3.03 1.63 1.94 1.94 2.00 2.31 2.25 2.50 2.63 2.75 3.38 4.00 4.00 4.25 5.00 5.00 4.88 5.50 5.63 6.00 6.50 Weights LWN HB F Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 5 8 9 13 16 20 27 36 45 77 123 152 207 324 393 471 638 731 916 1210 7 11 12 15 21 29 39 50 57 113 180 207 277 433 533 631 856 941 1180 1486 24 36 39 44 59 67 85 104 116 238 336 373 478 683 779 1149 1471 1628 1920 2376 0.4 0.7 0.8 1.0 1.2 1.5 2.1 2.7 3.4 4.5 7 9 11 18 23 21 28 31 39 49 0.6 0.9 1.1 1.4 1.9 2.6 3.6 4.6 5 7.8 12 14 19 30 37 33 45 48 61 73 3.1 4.6 5.1 5.8 7.8 8.5 11 13 15 22 32 36 46 67 76 82 105 118 139 176 Base Wt. Lngth. 9 9 9 9 9 9 9 9 9 12 12 12 12 12 12 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 25 CLASS 600 Size 1 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 FVC Variable Body Connections Barrel O.D. Flange O.D. Flange Thick. RF O.D. Bolt Holes Hole Size Bolt Circle Bore V1 V2 V3 O T R - - C B DV1 DV2 DV3 4.88 6.12 6.50 7.50 8.25 9.00 10.75 13.00 14.00 16.50 20.00 22.00 23.75 27.00 29.25 32.00 37.00 0.69 0.88 1.00 1.12 1.25 1.38 1.50 1.75 1.88 2.19 2.50 2.62 2.75 3.00 3.25 3.50 4.00 2.00 2.88 3.62 4.12 5.00 5.50 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 8 8 8 8 8 8 12 12 16 20 20 20 20 24 24 0.75 0.88 0.75 0.88 0.88 1.00 1.00 1.12 1.12 1.25 1.38 1.38 1.50 1.62 1.75 1.75 2.00 3.50 4.50 5.00 5.88 6.62 7.25 8.50 10.50 11.50 13.75 17.00 19.25 20.75 23.75 25.75 28.50 33.00 0.96 1.50 1.94 2.32 2.90 3.36 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 3.25 4.00 4.62 5.75 6.38 7.00 7.75 9.88 11.00 13.25 16.25 18.25 19.38 23.25 24.12 27.75 30.75 4.00 4.62 5.50 6.38 7.00 7.75 8.88 11.00 12.12 15.12 17.38 19.38 20.12 24.12 26.25 29.25 32.00 4.63 5.50 6.00 7.00 7.75 8.25 9.88 12.12 13.25 16.00 18.25 20.12 22.25 25.00 27.75 30.75 33.62 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. Notes continued on following page. 26 CLASS 600 FVC Variable Body Connections DON’T COMPROMISE! If your reinforcement requirements have not been met with these standard FVC connections, please see “Custom Products”, pages 54 to 56. Size 1 1½ 2 2½ 3 3½ 4 5 6 8 10 12 14 16 18 20 24 Nut Nut Nut Stop Relief Relief Dia. Dia. Lngth. Neck Thickness V1 V2 V3 NS NR NL N N N 2.44 3.25 3.94 4.62 5.38 5.81 7.06 8.88 9.88 11.94 15.00 17.25 18.56 21.38 23.19 25.94 30.06 2.12 2.75 3.31 3.94 4.62 5.25 6.00 7.50 8.75 10.75 13.50 15.75 17.00 19.50 21.50 24.00 28.25 0.88 1.00 0.88 1.00 1.00 1.12 1.12 1.25 1.25 1.38 1.50 1.50 1.62 1.75 1.88 1.88 2.12 1.15 1.25 1.34 1.72 1.74 1.82 1.96 2.54 2.62 2.82 3.35 3.44 2.69 3.63 3.06 3.88 3.38 1.52 1.56 1.78 2.03 2.05 2.20 2.53 3.10 3.18 3.75 3.91 4.00 3.06 4.06 4.13 4.63 4.00 1.83 2.00 2.03 2.34 2.43 2.45 3.03 3.66 3.75 4.19 4.35 4.37 4.13 4.50 4.88 5.38 4.81 Weights V1 V2 V3 Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 26 39 50 83 88 103 132 216 235 335 650 771 708 1055 1044 1398 1574 38 50 69 98 105 124 169 259 300 427 747 877 781 1151 1283 1582 1736 50 69 81 105 127 140 205 305 350 478 824 949 994 1248 1456 1767 1946 2.2 3.1 3.9 6.2 7.2 8.4 10.1 16.5 20 26 38 45 40 63 57 82 82 3.4 4.3 5.9 7.9 9.0 10.9 14.2 21.8 25 38 47 55 47 73 81 101 100 4.6 6.2 7.2 9.7 11.5 12.6 18.4 27.5 32 44 54 61 67 82 99 121 123 Base Wt. Lngth. 12 12 12 9 12 12 12 12 12 12 16 16 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 27 CLASS 900 Size ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 FVC Standard Connections Flange Flange O.D. Thick. Bore Barrel O.D. RF O.D. Bolt Holes Hole Size Bolt Circle LWN/F HB LWN HB F O T R - - C B B D D D 4.75 5.12 5.88 6.25 7.00 8.50 9.62 9.50 11.50 13.75 15.00 18.50 21.50 24.00 25.25 27.75 31.00 33.75 41.00 0.88 1.00 1.12 1.12 1.25 1.50 1.62 1.50 1.75 2.00 2.19 2.50 2.75 3.12 3.38 3.50 4.00 4.25 5.50 1.38 1.69 2.00 2.50 2.88 3.62 4.12 5.00 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 4 4 4 8 8 8 8 8 12 12 16 20 20 20 20 20 20 0.88 0.88 1.00 1.00 1.12 1.00 1.12 1.00 1.25 1.38 1.25 1.50 1.50 1.50 1.62 1.75 2.00 2.12 2.62 3.25 3.50 4.00 4.38 4.88 6.50 7.50 7.50 9.25 11.00 12.50 15.50 18.50 21.00 22.00 24.25 27.00 29.50 35.50 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 0.55 0.74 0.96 1.28 1.50 1.94 2.32 2.90 3.83 4.81 5.76 7.63 9.56 11.38 14.00 16.00 18.00 20.00 24.00 1.56 1.81 2.12 2.50 2.75 4.12 4.88 5.00 6.25 7.50 9.25 11.75 14.50 16.50 17.75 20.00 22.25 24.50 29.50 2.00 2.25 2.56 2.94 3.25 5.06 5.88 6.06 7.44 9.00 10.69 13.31 16.31 18.81 19.62 21.69 24.06 26.38 31.62 4.75 5.12 5.88 6.25 7.00 8.50 9.62 9.50 11.50 13.75 15.00 18.50 21.50 24.00 25.25 27.75 31.00 33.75 41.00 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. Notes continued on following page. 28 CLASS 900 FVC Standard Connections DON’T COMPROMISE! If your reinforcement requirements are in between the “HB” and “F” connections see the following page for Class 900 FVC Variable Body Connections Size ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 Neck Thickness Nut Nut Nut Stop Relief Relief HB F Dia. Dia. Lngth. LWN NS NR NL N N N 2.00 2.25 2.56 2.94 3.25 5.06 5.88 6.06 7.44 9.00 10.69 13.31 16.31 18.81 19.62 21.69 24.06 26.38 31.62 1.56 1.81 2.12 2.50 2.75 4.12 4.88 5.00 6.25 7.50 9.25 11.75 14.50 16.50 17.75 20.00 22.25 24.50 29.50 1.00 1.00 1.12 1.12 1.25 1.12 1.25 1.12 1.38 1.50 1.38 1.62 1.62 1.62 1.75 1.88 2.12 2.25 2.75 0.53 0.53 0.56 0.63 0.63 1.06 1.19 1.00 1.13 1.25 1.63 1.88 2.25 2.25 1.88 2.00 2.13 2.25 2.75 0.73 0.76 0.80 0.83 0.88 1.56 1.78 1.58 1.81 2.10 2.47 2.85 3.38 3.72 2.81 2.85 3.03 3.19 3.81 2.13 2.19 2.44 2.50 2.75 3.25 3.56 3.25 3.75 4.38 4.50 5.25 5.75 6.00 5.63 5.88 6.50 6.88 8.50 Weights LWN HB F Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 8 10 13 17 21 42 56 51 93 135 191 297 422 518 624 750 950 1121 1865 10 13 17 20 26 56 75 71 133 194 259 389 558 715 817 942 1169 1378 2160 37 42 54 61 77 115 144 139 270 376 436 626 824 984 1368 1573 1898 2182 3084 0.5 0.6 0.8 1.0 1.2 2.9 3.9 3.6 5.1 7 11 16 25 29 26 32 38 43 65 0.8 1.0 1.3 1.6 1.9 4.9 6.5 6.3 9.1 13 18 27 39 50 42 48 57 66 94 5.0 5.7 7.5 8.3 10 15 19 18 26 37 42 62 81 96 98 114 142 164 246 Base Wt. Lngth. 9 9 9 9 9 9 9 9 12 12 12 12 12 12 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 29 CLASS 900 Size 1 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 FVC Variable Body Connections Barrel O.D. Flange O.D. Flange Thick. RF O.D. Bolt Holes Hole Size Bolt Circle Bore V1 V2 V3 O T R - - C B DV1 DV2 DV3 5.88 7.00 8.50 9.62 9.50 11.50 13.75 15.00 18.50 21.50 24.00 25.25 27.75 31.00 33.75 41.00 1.12 1.25 1.50 1.62 1.50 1.75 2.00 2.19 2.50 2.75 3.12 3.38 3.50 4.00 4.25 5.50 2.00 2.88 3.62 4.12 5.00 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 8 8 8 8 8 12 12 16 20 20 20 20 20 20 1.00 1.12 1.00 1.12 1.00 1.25 1.38 1.25 1.50 1.50 1.50 1.62 1.75 2.00 2.12 2.62 4.00 4.88 6.50 7.50 7.50 9.25 11.00 12.50 15.50 18.50 21.00 22.00 24.25 27.00 29.50 35.50 0.96 1.50 1.94 2.32 2.90 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 3.25 4.00 5.50 6.38 7.00 8.88 10.38 11.00 15.12 17.38 20.12 22.25 23.25 26.00 27.75 33.62 4.00 5.50 6.00 7.00 7.75 9.88 11.00 12.12 16.25 18.25 22.25 23.25 25.00 27.75 30.75 35.00 4.62 6.00 7.00 8.25 8.25 10.38 12.12 13.50 17.38 20.12 23.25 24.12 26.50 29.25 32.00 36.00 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. Notes continued on following page. 30 CLASS 900 FVC Variable Body Connections DON’T COMPROMISE! If your reinforcement requirements have not been met with these standard FVC connections, please see “Custom Products”, pages 54 to 56. Size 1 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 Nut Nut Nut Stop Relief Relief Dia. Dia. Lngth. Neck Thickness V1 V2 V3 NS NR NL N N N 2.56 3.25 5.06 5.88 6.06 7.44 9.00 10.69 13.31 16.31 18.81 19.62 21.69 24.06 26.38 31.62 2.12 2.75 4.12 4.88 5.00 6.25 7.50 9.25 11.75 14.50 16.50 17.75 20.00 22.25 24.50 29.50 1.12 1.25 1.12 1.25 1.12 1.38 1.50 1.38 1.62 1.62 1.62 1.75 1.88 2.12 2.25 2.75 1.15 1.25 1.78 2.03 2.05 2.53 2.79 2.62 3.75 3.91 4.37 4.13 3.63 4.00 3.88 4.81 1.52 2.00 2.03 2.34 2.43 3.03 3.10 3.18 4.32 4.35 5.44 4.63 4.50 4.88 5.38 5.50 1.83 2.25 2.53 2.97 2.68 3.28 3.66 3.87 4.88 5.28 5.94 5.06 5.25 5.62 6.00 6.00 Weights V1 V2 V3 Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 29 43 80 107 114 177 242 271 474 804 1038 1068 1100 1365 1525 2360 41 71 92 123 136 211 265 317 528 880 1245 1166 1282 1555 1857 2515 51 82 117 158 151 228 309 377 584 1049 1345 1254 1451 1715 1994 2625 2.2 3.1 5.9 8 9 14 19 20 38 47 61 67 63 78 82 123 3.4 6.2 7.2 10 12 18 22 25 46 54 81 77 82 99 121 144 4.6 7.5 10.1 14 13 21 28 33 54 70 92 86 99 118 139 160 Base Wt. Lngth. 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 31 CLASS 1500 Size ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 Flange Flange O.D. Thick. FVC Standard Connections Bore Barrel O.D. RF O.D. Bolt Holes Hole Size Bolt Circle LWN/F HB LWN HB F O T R - - C B B D D D 4.75 5.12 5.88 6.25 7.00 8.50 9.62 10.50 12.25 14.75 15.50 19.00 23.00 26.50 29.50 32.50 36.00 38.75 46.00 0.88 1.00 1.12 1.12 1.25 1.50 1.62 1.88 2.12 2.88 3.25 3.62 4.25 4.88 5.25 5.75 6.38 7.00 8.00 1.38 1.69 2.00 2.50 2.88 3.62 4.12 5.00 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 4 4 4 8 8 8 8 8 12 12 12 16 16 16 16 16 16 0.88 0.88 1.00 1.00 1.12 1.00 1.12 1.25 1.38 1.62 1.50 1.75 2.00 2.12 2.38 2.62 2.88 3.12 3.62 3.25 3.50 4.00 4.38 4.88 6.50 7.50 8.00 9.50 11.50 12.50 15.50 19.00 22.50 25.00 27.75 30.50 32.75 39.00 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 0.55 0.74 0.96 1.28 1.50 1.94 2.32 2.90 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 1.56 1.81 2.12 2.50 2.75 4.12 4.88 5.25 6.38 7.75 9.00 11.50 14.50 17.75 19.50 21.75 23.50 25.25 30.00 2.00 2.25 2.56 2.94 3.25 5.06 5.88 6.19 7.50 9.12 10.31 12.94 16.06 19.38 21.50 23.88 26.25 28.12 33.62 4.75 5.12 5.88 6.25 7.00 8.50 9.62 10.50 12.25 14.75 15.50 19.00 23.00 26.50 29.50 32.50 36.00 38.75 46.00 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. Notes continued on following page. 32 CLASS 1500 FVC Standard Connections DON’T COMPROMISE! If your reinforcement requirements are in between the “HB” and “F” connections see the following page for Class 1500 FVC Variable Body Connections Size ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 Neck Thickness Nut Nut Nut Stop Relief Relief HB F Dia. Dia. Lngth. LWN NS NR NL N N 2.00 2.25 2.56 2.94 3.25 5.06 5.88 6.19 7.50 9.12 10.31 12.94 16.06 19.38 21.50 23.88 26.25 28.12 33.62 1.56 1.81 2.12 2.50 2.75 4.12 4.88 5.25 6.38 7.75 9.00 11.50 14.50 17.75 19.50 21.75 23.50 25.25 30.00 1.00 1.00 1.12 1.12 1.25 1.12 1.25 1.38 1.50 1.75 1.62 1.88 2.12 2.25 2.50 2.75 3.00 3.25 3.75 0.53 0.53 0.56 0.63 0.63 1.06 1.19 1.13 1.19 1.38 1.50 1.75 2.25 2.88 2.75 2.88 2.75 2.63 3.00 N 0.73 2.13 0.76 2.19 0.80 2.44 0.83 2.50 0.88 2.75 1.56 3.25 1.78 3.56 1.65 3.75 1.84 4.13 2.16 4.88 2.28 4.75 2.66 5.50 3.25 6.50 4.00 7.25 3.75 7.75 3.94 8.25 4.13 9.00 4.06 9.38 4.81 11.00 Weights LWN HB F Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 8 10 13 17 21 42 56 67 110 181 215 337 546 946 1116 1371 1674 1943 2936 10 13 17 20 26 56 75 84 147 233 272 417 651 1148 1308 1588 1959 2241 3334 37 42 54 61 77 115 144 161 302 414 445 629 888 1683 1929 2238 2629 2868 3819 0.5 0.6 0.8 1.0 1.2 2.9 3.9 4.1 5.5 7.8 10 15 25 38 41 48 51 53 72 0.8 1.0 1.3 1.6 1.9 4.9 6.5 6.7 9.3 13 16 24 37 55 59 70 81 87 123 5.0 5.7 7.5 8.3 10 15 19 23 30 43 46 67 97 127 150 178 216 245 343 Base Wt. Lngth. 9 9 9 9 9 9 9 9 12 12 12 12 12 16 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 33 CLASS 1500 Size 1 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 FVC Variable Body Connections Barrel O.D. Flange O.D. Flange Thick. RF O.D. Bolt Holes Hole Size Bolt Circle Bore V1 V2 V3 O T R - - C B DV1 DV2 DV3 5.88 7.00 8.50 9.62 10.50 12.25 14.75 15.50 19.00 23.00 26.50 29.50 32.50 36.00 38.75 46.00 1.12 1.25 1.50 1.62 1.88 2.12 2.88 3.25 3.62 4.25 4.88 5.25 5.75 6.38 7.00 8.00 2.00 2.88 3.62 4.12 5.00 6.19 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00 27.25 4 4 8 8 8 8 8 12 12 12 16 16 16 16 16 16 1.00 1.12 1.00 1.12 1.25 1.38 1.62 1.50 1.75 2.00 2.12 2.38 2.62 2.88 3.12 3.62 4.00 4.88 6.50 7.50 8.00 9.50 11.50 12.50 15.50 19.00 22.50 25.00 27.75 30.50 32.75 39.00 0.96 1.50 1.94 2.32 2.90 3.83 4.81 5.76 7.62 9.56 11.38 14.00 16.00 18.00 20.00 24.00 3.25 4.62 5.50 6.38 7.00 8.88 10.38 12.12 15.12 17.38 22.25 23.25 26.25 27.75 30.75 36.00 4.00 5.50 6.00 7.00 7.75 9.88 12.12 13.50 16.25 20.12 23.25 25.00 29.25 30.75 33.00 37.50 4.62 6.00 7.00 8.25 8.88 11.00 13.50 14.25 17.38 22.25 24.12 27.75 30.75 33.62 36.00 40.50 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. Notes continued on following page. 34 CLASS 1500 FVC Variable Body Connections DON’T COMPROMISE! If your reinforcement requirements have not been met with these standard FVC connections, please see “Custom Products”, pages 54 to 56. Size 1 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 Nut Nut Nut Stop Relief Relief Dia. Dia. Lngth. Neck Thickness V1 V2 V3 NS NR NL N N N 2.56 3.25 5.06 5.88 6.19 7.50 9.12 10.31 12.94 16.06 19.38 21.50 23.88 26.25 28.12 33.62 2.12 2.75 4.12 4.88 5.25 6.38 7.75 9.00 11.50 14.50 17.75 19.50 21.75 23.50 25.25 30.00 1.12 1.25 1.12 1.25 1.38 1.50 1.75 1.62 1.88 2.12 2.25 2.50 2.75 3.00 3.25 3.75 1.15 1.56 1.78 2.03 2.05 2.53 2.79 3.18 3.75 3.91 5.44 4.63 5.13 4.88 5.38 6.00 1.52 2.00 2.03 2.34 2.43 3.03 3.66 3.87 4.32 5.28 5.94 5.50 6.63 6.38 6.50 6.75 1.83 2.25 2.53 2.97 2.99 3.59 4.34 4.25 4.88 6.35 6.37 6.88 7.38 7.81 8.00 8.25 Weights V1 V2 V3 Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 29 54 80 107 124 187 271 332 498 889 1348 1443 1771 2070 2417 3470 41 71 92 123 144 218 328 380 541 1088 1426 1579 1999 2285 2558 3545 51 82 117 158 177 257 376 408 585 1243 1495 1794 2111 2481 2727 3675 2.2 4.3 5.9 8 9 14 19 25 38 47 81 77 96 99 121 160 3.4 6.2 7.2 10 12 18 28 33 46 70 92 95 133 138 153 185 4.6 7.5 10.1 14 16 24 35 38 54 90 101 128 153 180 200 237 Base Wt. Lngth. 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 35 CLASS 2500 Size ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 Flange Flange O.D. Thick. FVC Standard Connections Bore Barrel O.D. RF O.D. Bolt Holes Hole Size Bolt Circle LWN/F HB LWN HB F O T R - - C B B D D D 5.25 5.50 6.25 7.25 8.00 9.25 10.50 12.00 14.00 16.50 19.00 21.75 26.50 30.00 1.19 1.25 1.38 1.50 1.75 2.00 2.25 2.62 3.00 3.62 4.25 5.00 6.50 7.25 1.38 1.69 2.00 2.50 2.88 3.62 4.12 5.00 6.19 7.31 8.50 10.62 12.75 15.00 4 4 4 4 4 8 8 8 8 8 8 12 12 12 0.88 0.88 1.00 1.12 1.25 1.12 1.25 1.38 1.62 1.88 2.12 2.12 2.62 2.88 3.50 3.75 4.25 5.12 5.75 6.75 7.75 9.00 10.75 12.75 14.50 17.25 21.25 24.38 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 4.00 5.00 6.00 8.00 10.00 12.00 0.55 0.74 0.96 1.28 1.50 1.94 2.32 2.90 3.83 4.81 5.76 7.63 9.56 11.38 1.81 2.06 2.25 2.88 3.12 3.75 4.50 5.25 6.50 8.00 9.25 12.00 14.75 17.38 2.25 2.50 2.81 3.50 3.94 5.12 5.94 7.00 8.38 10.00 11.38 14.12 17.38 20.12 5.25 5.50 6.25 7.25 8.00 9.25 10.50 12.00 14.00 16.50 19.00 21.75 26.50 30.00 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. Notes continued on following page. 36 CLASS 2500 FVC Standard Connections DON’T COMPROMISE! If your reinforcement requirements are in between the “HB” and “F” connections see the following page for Class 2500 FVC Variable Body Connections Size Neck Thickness Nut Nut Nut Stop Relief Relief HB F Dia. Dia. Lngth. LWN NS ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 NR 2.25 1.81 2.50 2.06 2.81 2.25 3.50 2.88 3.94 3.12 5.12 3.75 5.94 4.50 7.00 5.25 8.38 6.50 10.00 8.00 11.38 9.25 14.12 12.00 17.38 14.75 20.12 17.38 NL N N N 1.00 1.00 1.12 1.25 1.38 1.25 1.38 1.50 1.75 2.00 2.25 2.25 2.75 3.00 0.66 0.66 0.63 0.82 0.81 0.88 1.00 1.13 1.25 1.50 1.63 2.00 2.38 2.69 0.85 0.88 0.93 1.11 1.22 1.59 1.81 2.05 2.28 2.60 2.81 3.25 3.91 4.37 2.38 2.38 2.63 3.00 3.25 3.63 4.00 4.50 5.00 5.75 6.50 6.88 8.25 9.00 Weights LWN HB F Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 11 13 18 27 33 48 66 97 159 248 358 589 997 1363 14 17 22 32 42 66 90 127 218 319 441 743 1202 1609 45 49 62 84 94 131 165 210 391 518 641 1167 1625 1995 0.7 0.8 0.9 1.5 1.7 2.2 3.1 4.1 5.8 8.7 11 18 26 35 1.1 1.3 1.6 2.4 3 5 6.7 9 12 17 21 31 47 61 6.1 6.6 8.5 11 14 18 23 30 40 55 73 92 134 168 Base Wt. Lngth. 9 9 9 9 9 9 9 9 12 12 12 16 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 37 CLASS 2500 Size 1 1½ 2 2½ 3 4 5 6 8 10 12 FVC Variable Body Connections Barrel O.D. Flange O.D. Flange Thick. RF O.D. Bolt Holes Hole Size Bolt Circle Bore V1 V2 V3 O T R - - C B DV1 DV2 DV3 6.25 8.00 9.25 10.50 12.00 14.00 16.50 19.00 21.75 26.50 30.00 1.38 1.75 2.00 2.25 2.62 3.00 3.62 4.25 5.00 6.50 7.25 2.00 2.88 3.62 4.12 5.00 6.19 7.31 8.50 10.62 12.75 15.00 4 4 8 8 8 8 8 8 12 12 12 1.00 1.25 1.12 1.25 1.38 1.62 1.88 2.12 2.12 2.62 2.88 4.25 5.75 6.75 7.75 9.00 10.75 12.75 14.50 17.25 21.25 24.38 0.96 1.50 1.94 2.32 2.90 3.83 4.81 5.76 7.62 9.56 11.38 4.00 5.50 6.00 7.00 8.25 9.88 11.00 13.50 15.12 20.12 22.25 4.62 6.00 7.00 7.75 9.88 11.00 13.50 15.12 18.25 22.25 25.00 5.50 7.00 8.00 8.88 11.00 12.12 15.25 17.38 20.12 24.12 27.75 Material: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See “Technical Section” on page 59 for stocked materials. Length: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and longer are available upon request. Facing: The FVC flange thickness “T” excludes 0.25 inch raised face per ASME B16.5. This differs on Classes 150 and 300. FVC can supply any special facing as needed upon request. Notes continued on following page. 38 CLASS 2500 FVC Variable Body Connections DON’T COMPROMISE! If your reinforcement requirements have not been met with these standard FVC connections, please see “Custom Products”, pages 54 to 56. Size Nut Nut Nut Stop Relief Relief Dia. Dia. Lngth. NS 1 1½ 2 2½ 3 4 5 6 8 10 12 NR 2.81 2.25 3.94 3.12 5.12 3.75 5.94 4.50 7.00 5.25 8.38 6.50 10.00 8.00 11.38 9.25 14.12 12.00 17.38 14.75 20.12 17.38 Neck Thickness V1 V2 V3 NL N N N 1.12 1.38 1.25 1.38 1.50 1.75 2.00 2.25 2.25 2.75 3.00 1.52 2.00 2.03 2.34 2.68 3.03 3.10 3.87 3.75 5.28 5.44 1.83 2.25 2.53 2.72 3.49 3.59 4.35 4.68 5.32 6.35 6.81 2.27 2.75 3.03 3.28 4.05 4.15 5.22 5.81 6.25 7.28 8.19 Weights V1 V2 V3 Base Wt. Wt. 1” Base Wt. Wt. 1” Base Wt. Wt. 1” 43 79 99 135 186 259 347 499 647 1342 1713 54 89 123 153 232 293 422 545 735 1451 1844 71 112 149 184 267 328 477 609 785 1545 1966 3.4 6.2 7.2 10 13 18 22 33 38 70 81 4.6 7.5 10 12 20 24 35 44 61 90 110 6.5 10.4 13.4 16 25 29 47 60 77 109 143 Base Wt. Lngth. 12 12 12 12 12 12 12 12 12 16 16 Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. Nut Relief: All FVC connections except standard LWN’s will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Bore: Bore sizes shown above are standard, other sizes can be furnished upon request. Curving: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. See page 40 for complete general notes. 39 Notes for FVC Standard and Variable Body Connections 40 Codes: Material and manufacturing practices for FVC connections are in compliance with ASME Section II, Section VIII Division 1, ASME B16.5, ASME B31.3, and ASME B31.4. Other requirements can be met when specified. Materials: FVC forged connections are made from SA-105 in compliance with ASME Section II. FVC connections are available in other material compositions upon request. See the “Technical Section” on page 59 for materials stocked by FVC. Lengths: The length of all connections includes the barrel, flange and facing. See the current FVC price sheet for standard lengths. Intermediate lengths and lengths longer than standard are available upon request. Facings: All FVC flanges are furnished with a raised face per ASME B16.5. A 0.06inch raised face is provided on CLASS 150 and 300 flanges and it is included in the “T” dimension. A 0.25-inch raised face is provided on CLASS 400 and above flanges and it is excluded from the “T” dimension. See the “Technical Section,” pages 62 through 65, for other types of facings available on FVC flanges. Gaskets are not furnished by FVC. Bolting and Tolerances: FVC flanges are furnished to ASME B16.5 specifications unless otherwise specified. See the “Technical Section,” pages 60 and 61, for complete FVC tolerances. Bolting is not furnished by FVC. Nut Relief: All FVC connections, except standard LWN’s, will be supplied with a “nut stop O.D.” unless a “nut relief O.D.” is specified. Nut Stop: All FVC “HB”, “V1”, “V2”, “V3” and “F” style connections are furnished with “nut stop O.D.” (not available on “LWN” barrels). This barrel O.D. acts as an automatic nut stop, preventing the nut from turning, thus only requiring one wrench to loosen or tighten bolting on the connecting pipe side. Bore: Standard bores on all FVC connections are to the nominal flange size except for 12" and smaller “HB” and “Variable Body” connections which are bored to match schedule 80 pipe. Larger or smaller bores can be provided on all FVC connections upon request. Underside Curvatures: All FVC connections can be furnished contoured to fit any shell, head or cone at a minimal cost. Unless otherwise specified, all connections will be furnished with flat bottom. Flanges and Drilling: All flanges are drilled unless otherwise specified. Bolt holes are drilled 1/8” larger than bolts. Bolt holes will straddle natural centerlines, unless otherwise specified. Bolts, nuts, studs, inserts and gaskets are not furnished by FVC. Press-Temp Ratings: All FVC flanges are furnished to conform to ASME B16.5 pressure-temperature ratings. See the “Technical Section,” pages 68 through 72, for rating charts and notes regarding allowable design pressures and hydrotest pressures. Heat Treatment: All standard FVC connections over CLASS 300 rating and CLASS 300 “HB”, “V1”, “V2”, “V3” and “F” connections are supplied in the normalized condition. Additional heat treating requirements can be furnished upon request. FVC Terms and Warranty 1. Any Sales Tax, Manufacturer’s Tax, or Use tax imposed by Federal, State or Municipal Law is to be added to the prices and assumed by purchaser. 2. Seller is not responsible for delays, defaults, or damages occasioned by any causes beyond seller’s control including, without limitation, governmental actions or orders, embargoes, strikes, fires and floods. In any event, partial deliveries shall be permitted at seller’s option. 3. Cancellations, of orders placed with and accepted by us, can be made only with our written consent. Upon request to cancel, we will advise amount of cancellation charges, in addition to charges for dies, work in process, products produced, including machine work, etc., and all liability for raw materials. Should you change your material specification for your order after we have ordered or received the material, you are to assume all liability for the material covered by your initial specification. 4. It is understood that dies, tools, and patterns required to produce the article quoted on shall remain the property of FVC, Inc. Preparation charges or charges for dies, tools, and patterns represents only a portion of cost. Payment of such charge does not give you any right, title, or interest in such dies, tools, or other products of preparation. 5. Purchaser represents that purchaser is solvent and can and will pay for products delivered to purchaser in accordance with the terms hereof. However, seller retains the right to require full payment in advance if in seller’s sole discretion the financial position of the purchaser so requires. 6. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF EXCEPTING ONLY THAT EACH PRODUCT SOLD HEREUNDER IS WARRANTED TO BE FREE FROM MANUFACTURING DEFECTS, AND IF DEFECTIVE, WILL EITHER BE REPAIRED OR REPLACED WITHOUT CHARGE OR THE PURCHASE PRICE WILL BE REFUNDED, AT THE OPTION OF SELLER. SELLER MAKES NO OTHER WARRANTY, EITHER EXPRESS OR IMPLIED. SELLER’S LIABILITY IS LIMITED TO THE SALE PRICE OF THE PARTICULAR PRODUCT. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES OR FOR EXPENSE OCCASIONED BY THE USE OF DEFECTIVE PRODUCTS. SELLER’S LIABILITIES AS ABOVE SET OUT SHALL NOT BE EXTENDED BECAUSE OF ADVICE GIVEN BY SELLER IN CONNECTION WITH THE DESIGN, INSTALLATION OR USE OF ANY PRODUCT. PURCHASER AGREES THAT IF THE PRODUCTS SOLD HEREUNDER ARE BY PURCHASER RE-SOLD, PURCHASER WILL INCLUDE IN THE CONTRACT FOR RE-SALE, PROVISIONS WHICH LIMIT RECOVERIES AGAINST THIS SELLER IN ACCORDANCE WITH THIS PARAGRAPH. 7. Claims for shortages must be filed within ten days of receipt of shipment. 8. We assume no responsibility if the manufacture and sale to you of the items specified by you is an infringement of patent rights of other persons, you assume responsibility for and will protect us from such infringement liability, except as to our own manufacturing equipment and processes. 9. Stenographic or clerical errors are subject to correction. 10. Deferred deliveries are subject to FVC, Inc. written approval. 11. Purchases from us may not be returned without our written consent. 12. These terms and conditions shall control in any contract resulting from or arising out of this quotation, price sheet, or acknowledgement, regardless of printed terms, conditions or provisions found in responses hereto or documents giving rise hereto, all of such printed matters incorporated there in being deemed waived insofar as the same differ from these terms and conditions, unless such differing terms, conditions or provisions shall be specifically asserted for inclusion in written form other than printing and be specifically accepted by seller as a change in these terms and conditions by express reference in writing. The applicability of this paragraph is an express condition to any contract being formed between us. 13. Catalog product presentations including catalog dimensions, designs and specifications are representative of product availability at time of publication only. Actual geometry dimensions and designs are subject to designs and manufacturing changes without notice. 14. Material quoted as being available from stock is normally available for immediate shipment but subject to prior sale. 15. The above and foregoing terms and conditions are the final expressions of the terms and conditions of the contract which may be or is formed between us and they are intended also as a complete and exhaustive statement of the terms and conditions of such agreement. 16. All published prices are/or may be subject to a surcharge to customers, who, by reason of current or prior trade or business practices or course of dealings with FVC have increased or may increase marketing or distribution costs. 80