8300 Liquid Fertilizer Applicator
Parts Manual
Fast Distributing, Inc.
54859 County Road 44
Mountain Lake, MN 56159
General Information
All rights, especially copying and distribution rights are reserved. No part of this publication may be reproduced in any
form or by any means, electronic or mechanical, including photocopying, without express written permission from Fast
Distributing, Inc.
Parts information in this manual represents components installed when product was manufactured based upon the best
available information. Modifications made subsequent to initial delivery are not included. Always verify the parts and color
required with Fast Distributing, Inc at 1-800-772-9279.
If you have any questions, please contact your dealer or our Parts and Service Department.
8300 Applicator
Limited Warranty
Fast Distributing Inc. warrants to the buyer that the new machinery is free from defects in material and workmanship.
This warranty is only effective as to any new machinery which has not been altered, changed, repaired or treated since its
delivery to the buyer, other than by FAST DISTRIBUTING or its authorized dealers or employees, and does not apply to
accessories, attachments, tools or parts, sold or operated with the new machinery, if they have not been manufactured by
FAST DISTRIBUTING.
FAST DISTRIBUTING shall only be liable for defects in the materials or workmanship attributable to faulty material or bad
workmanship that can be proved by the buyer, and specifically excludes liability for repairs arising as a result of normal
wear and tear of the new machinery or in any other manner whatsoever, and without limiting the generality of the foregoing,
excludes application or installation of parts not completed in accordance with FAST DISTRIBUTING operator’s manual,
specifications, or printed instructions.
Written notice shall be given by registered mail, to FAST DISTRIBUTING within seven (7) days after the defect shall have
become apparent or the repairs shall have become necessary, addressed as follows:
FAST DISTRIBUTING INC.
54859 County Road 44,
Mountain Lake, MN 56159.
This warranty shall expire one (1) year after the date of delivery of the new machinery.
If these conditions are fulfilled, FAST shall at its own cost and at its own option either repair or replace any defective parts
provided that the buyer shall be responsible for all expenses incurred as a result of repairs, labor, parts, transportation or
any other work, unless FAST has authorized such expenses in advance.
The warranty shall not extend to any repairs, changes, alterations, or replacements made to the new equipment other than
by FAST or its authorized dealers or employees.
This warranty extends only to the original owner of the new equipment.
Rubber parts (including tires, hoses, grommets) are not warranted.
This warranty is limited to the terms stated herein and is in lieu of any other warranties whether express or implied, and
without limiting the generality of the foregoing, excluded all warranties, express or implied or conditions whether statutory
or otherwise as to quality and fitness for any purpose of the new equipment. FAST disclaims all liability for incidental or
consequential damages.
This Applicator is subject to design changes and FAST DISTRIBUTING INC. shall not be required to retrofit or exchange
items on previously sold units except at its own option.
Fast Distributing Inc.
Warranty void if not registered.
8300 Series Applicator 3
www.fastdist.com
8300 Applicator
FAST 8300 Series Applicator
Fast Applicator Serial Number____________-_____________-___________
Date Purchased ______/_______/______
Tank Size__________
Number of Coulters____________
Pump Manufacturer: Ace 150F-206, or Ace 205F-304 or Hypro HM1
(circle one)
www.fastdist.com
4
8300 Series Applicator
8300 Applicator
Contents
General Information. ................................................................................................. 2
8310 - 8313 Small Cart............................................................................................ 6
8310 - 8313 Small Cart - Continued......................................................................... 8
8318 - 8324 Large Cart.......................................................................................... 10
8318 - 8324 Large Cart - Continued....................................................................... 12
Axles. ...................................................................................................................... 14
Tire & Rim................................................................................................................ 16
Units With Yellow Tanks......................................................................................... 16
Units With White Tanks........................................................................................... 16
1050 - 2400 Tank Parts. ......................................................................................... 17
Center, Inner And Outer Wing Section.................................................................... 18
Gauge Wheel. .......................................................................................................... 20
Mounting Clamp Kit For Ausherman Coulter Option............................................... 21
Ausherman Vantage II Fertilizer Coulter................................................................. 22
Coulter Assembly. ................................................................................................... 24
Knife Assembly......................................................................................................... 26
8310 - 8313 2 Inch Quick Fill.................................................................................. 27
8310 - 8313 3 Inch Quick Fill.................................................................................. 28
8318 - 8324 2 Inch Quick Fill.................................................................................. 29
8318 - 8324 3 Inch Quick Fill.................................................................................. 30
8310 - 8313 Tank To Pump Plumbing. ...................................................................... 31
8318 - 8324 Tank To Pump Plumbing. ...................................................................... 32
Ace 150-206 Pump Hydraulic Motor. ...................................................................... 33
Ace 150-206 Pump .................................................................................................. 34
Optional Hypro Pump .............................................................................................. 35
8310 - 8324 Agitation And Control......................................................................... 36
8310 - 8313 Pump To Ball Valve............................................................................. 38
8318 - 8324 Pump To Ball Valve............................................................................. 40
Toolbar Plumbing.................................................................................................... 42
Raven SCS450 Console. ......................................................................................... 43
Control Console Harness - 155-0171-085.............................................................. 44
Control Console Harness - 155-0159-856.............................................................. 45
Control Console Harness - 155-0171-086.............................................................. 46
Hydraulic System For Pump .................................................................................... 47
Hydraulic Schematic . .............................................................................................. 48
Toolbox Carrier ..................................................................................................... 50
Kit Contents ........................................................................................................... 51
Lighting ................................................................................................................... 52
8300 Series Applicator 5
www.fastdist.com
8300 Applicator
8310 - 8313 Small Cart
67
70
69
9
28
20
20
29
21
52
53
25
18
11
46
41
40
35
10
22 33
1
25
47
18
60
62
15
31
42
3
13
2
26
4
24
48
30
34
49
32
58
19
43
64
44
45
61
39
31
57
7
54
6
17
38
14
63
27
23
37
12
8
24
56
16
51
36 59
5
55
68
50
66
65
www.fastdist.com
6
8300 Series Applicator
8300 Applicator
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
102
119
122
129
131
157
164
169
170
171
213
228
231
233
236
237
239
240
242
250
253
256
257
258
261
262
390
592
616
683
687
759
767
769
13594
15159
15430
Description
Bolt, 1/2 X 1” Grade 5 ZP
Bolt, 5/16 X 3” Grade 5 ZP
Bolt, 5/16 X 4-1/2” Grade 5 ZP
Bolt, 3/8 X 1-1/2” Grade 5 ZP
Bolt, 3/8 X 2-1/2” Grade 5 ZP
Bolt, 1/2 X 3-1/2” Grade 5 ZP
Bolt, 1/2 X 7” Grade 5 ZP
Bolt, 5/8 X 1-1/2” Grade 5 ZP
Bolt, 5/8 X 2” Grade 5 ZP
Bolt, 5/8 X 2-1/2” Grade 5 ZP
Nut, 3/8” ZP
Nut, Nylock, 5/16” ZP
Nut, Nylock, 1/2” ZP
Nut, Nylock, 3/4” ZP
Nut, Centerlock, 5/16” ZP
Nut, Centerlock, 3/8” ZP
Nut, Centerlock, 1/2” ZP
Nut, Centerlock, 5/8” ZP
Nut, Centerlock, 1” ZP
Washer, Lock, 3/8” ZP
Washer, Lock, 5/8” ZP
1/4” Flat Washer ZP
Washer, 5/16” ZP
Washer, 3/8” ZP
Washer, 5/8” ZP
Washer 3/4” ZP
Bolt, 3/4 X 5-1/2” Grade 8 ZP
Bolt, Carriage, 3/8 X 1” Grade 5 ZP
Bolt, 3/8 X 1-1/4” Grade 5 ZP
Roll Pin, 1/4 X 1-1/2”
Roll Pin, 1/4 X 2”
Zerk, 1/4” Straight Pipe
Nut, Whiz, 1/4” ZP
Nut, Whiz, 3/8” ZP
Tube, Support
5” Cylinder Stop
Jack Holder Weldment
8300 Series Applicator 7
Qty.
5
1
2
2
1
8
2
AR
2
2
8
2
2
1
1
1
8
10
3
AR
2
5
2
6
AR
1
1
8
2
1
3
10
5
2
AR
2
1
www.fastdist.com
8300 Applicator
8310 - 8313 Small Cart - Continued
67
70
69
9
28
20
20
29
21
52
53
25
18
11
46
41
40
35
10
22 33
1
25
47
18
60
62
15
31
42
3
13
2
26
4
24
48
30
34
49
32
58
19
43
64
44
45
61
39
31
57
7
54
6
17
38
14
63
27
23
37
12
8
24
56
16
51
36 59
5
55
68
50
66
65
www.fastdist.com
8
8300 Series Applicator
8300 Applicator
Item Vendor Part # Fast Part #
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
NS
NS
NS
NS
15437
15440
15558
15566
15810
15829
15835
15846
17001
17820
17822
17823
17846
18445
540053
590023
590153
590218
590226
620007
710005
720001
740018
750033
750048
790002
790004
790045
790049
800109
800110
800111
90ASMV
590205
590206
590207
590208
Description
3/4” Link Pin
Pin, Jack, Removable
Bracket, Hose
Tube, Spacer
Hose Holder Weldment
Plate, Safety Chain Washer
DOM, Safety Chain Spacer
Pin, Cylinder, 1.25”
Weldment, 30-40 FT fertilizer Cart
Liftarm, Upper
Liftarm, Lower
Pin, Tube Liftarm
Small Cart Jack Crank
Anti Rotation Pin
P-Clamp, 4” With .38” Hole
1/2” UHMW Hold Down Tab
Bolt, 1 X 6-3/4” Grade 5 ZP
Washer, 1-1/4” 14GA ZP
1 X 3-1/4” Grade 5 ZP
Cylinder, 4 X 8” ASAE
Lynch Pin, 1/4 X 1-3/4” ZP
Snap Pin
Light Harness Holder
5MM X 50MM Spring Pin ZP
Manual Holder
Hitch, CAT 4, Bottom
Hitch, CAT 4, Top
Jack, Jost, 25,000 LB Lifting
Safety Chain, 25,000 LB
Decal, Red Reflector
Decal, Amber Reflector
Decal, Orange Reflector
SMV Assembly
3/4” Cylinder Stop
1” Cylinder Stop
1-1/4” Cylinder Stop
1-1/2” Cylinder Stop
8300 Series Applicator 9
Qty.
1
1
2
2
1
1
1
2
1
2
2
8
1
2
8
2
2
4
1
2
1
2
1
4
1
1
1
1
1
1
4
1
1
2
2
2
2
www.fastdist.com
8300 Applicator
8318 - 8324 Large Cart
72
69
71
9
51
42
21
25
34
28
47
7
20
24
53
54
29
48
20
11
13
46
10
29
22
33
1
39 40
61
4
24
63
41
3
13
14
19
59
49
2
17
50
32
30
37
38
58
45
62
24
64
35
5
60
31
52
70
56
16
67
27
68
6
26
8
55
65
23
36
12
34
15
31
25
18
44 43 57
66
www.fastdist.com
10
8300 Series Applicator
8300 Applicator
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
102
119
122
129
131
157
162
164
170
171
213
228
231
233
236
237
239
240
242
250
253
256
257
258
261
262
390
592
616
683
687
759
767
769
15159
15430
15437
15440
15558
15566
Description
Bolt, 1/2 X 1” Grade 5 ZP
Bolt, 5/16 X 3” Grade 5 ZP
Bolt, 5/16 X 4-1/2” Grade 5 ZP
Bolt, 3/8 X 1-1/2” Grade 5 ZP
Bolt, 3/8 X 2-1/2” Grade 5 ZP
Bolt, 1/2 X 3-1/2” Grade 5 ZP
Bolt, 1/2 6” Grade 5 ZP
Bolt, 1/2 X 7” Grade 5 ZP
Bolt, 5/8 X 2” Grade 5 ZP
Bolt, 5/8 X 2-1/2” Grade 5 ZP
Nut, 3/8” ZP
Nut, Nylock, 5/16” ZP
Nut, Nylock, 1/2” ZP
Nut, Nylock, 3/4” ZP
Nut, Centerlock, 5/16” ZP
Nut, Centerlock, 3/8” ZP
Nut, Centerlock, 1/2” ZP
Nut, Centerlock, 5/8” ZP
Nut, Centerlock, 1” ZP
Washer, Lock, 3/8” ZP
Washer, Lock, 5/8” ZP
1/4” Flat Washer ZP
Washer, 5/16” ZP
Washer, 3/8” ZP
Washer, 5/8” ZP
Washer 3/4” ZP
Bolt, 3/4 X 5-1/2” Grade 8 ZP
Bolt, Carriage, 3/8 X 1” Grade 5 ZP
Bolt, 3/8 X 1-1/4” Grade 5 ZP
Roll Pin, 1/4 X 1-1/2”
Roll Pin, 1/4 X 2”
Zerk, 1/4” Straight Pipe
Nut, Whiz, 1/4” ZP
Nut, Whiz, 3/8” ZP
5” Cylinder Stop
Jack Holder Weldment
3/4” Link Pin
Pin, Jack, Removable
Bracket, Hose
Tube, Spacer
8300 Series Applicator 11
Qty.
5
1
2
2
1
8
AR
2
2
6
2
2
AR
1
1
1
8
6
3
4
2
5
2
6
14
1
1
2
4
1
3
10
5
4
2
1
1
1
2
2
www.fastdist.com
8300 Applicator
8318 - 8324 Large Cart - Continued
72
69
71
9
51
42
21
25
34
28
47
7
20
24
53
54
29
48
20
11
13
46
10
29
22
33
1
39 40
61
4
24
3
13
14
19
59
17
50
32
30
37
38
58
45
62
24
64
35
5
60
31
52
70
56
16
67
27
68
6
49
2
26
8
55
65
23
36
12
34
15
31
63
41
25
18
44 43 57
66
www.fastdist.com
12
8300 Series Applicator
8300 Applicator
Item Vendor Part # Fast Part #
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
NS
NS
NS
NS
NS
15810
15814
15829
15835
15846
16892
16905
17820
17822
17823
18397
18445
540053
590023
590153
590218
590226
620007
710005
720001
740018
750033
750048
790002
790004
790045
790046
790050
800109
800110
800111
90ASMV
15300
590205
590206
590207
590208
Description
Hose Holder Weldment
Plate, Ball Valve Mount
Plate, Safety Chain Washer
DOM, Safety Chain Spacer
Pin, Cylinder, 1.25”
1800 Gallon Fertilizer Cart
Plate, Bolt Through
Liftarm, Upper
Liftarm, Lower
Pin, Tube Liftarm
Mount, Flow Meter
Anti Rotation Pin
P-Clamp, 4” With .38” Hole
1/2” UHMW Hold Down Tab
Bolt, 1 X 6-3/4” Grade 5 ZP
Washer, 1-1/4” 14GA ZP
1 X 3-1/4” Grade 5 ZP
Cylinder, 4 X 8” ASAE
Lynch Pin, 1/4 X 1-3/4” ZP
Snap Pin
Light Harness Holder
5MM X 50MM Spring Pin ZP
Manual Holder
Hitch, CAT 4, Bottom
Hitch, CAT 4, Top
Jack, Jost, 25,000 LB Lifting
Handle, Jost Jack
Chain, Safety, 30,000 LB
Decal, Red Reflector
Decal, Amber Reflector
Decal, Orange Reflector
SMV Assembly
2400 Gallon Fertilizer Cart
3/4” Cylinder Stop
1” Cylinder Stop
1-1/4” Cylinder Stop
1-1/2” Cylinder Stop
8300 Series Applicator 13
Qty.
1
AR
1
1
2
AR
AR
2
2
8
1
2
2
2
2
4
1
2
1
2
1
4
1
1
1
1
1
1
4
1
1
AR
2
2
2
2
www.fastdist.com
8300 Applicator
Axles
1
2
3
4
5
6
7
8
16
15 14
9
10
11
12
13
17
18
19
20
32
31
30
www.fastdist.com
14
21
22
23
24
29
28
27
25
26
8300 Series Applicator
8300 Applicator
Item Vendor Part # Fast Part #
1
NS
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
NS
NS
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
NS
NS
NS
NS
NS
NS
NS
NS
16695
16888
730013
730054
1678
730002
730074
730012
730018
730014
730016
730072
113
730015
730051
730045
18430
10913
10910
10907
730041
730043
730012
730060
1679
730037
730040
730038
113
730061
730056
730042
730051
NI953035
710010
710016
710014
18360
18174
16930
18433
18435
18416
Description
Axle 60' Side Fold 15000# 120” Wheel Track
Axle Single 15000# 88” Wheel Track
Seal 10 Bolt (906497 CR30087)
Cone Inner (910333/39585)
Cup Inner (910331/39520)
Hub 10 Bolt W/Cups
Cup Outer (910332/453A)
Cone Outer (910334/460)
Washer Spindle (913632)
Nut Spindle 1.25-12 TPI
Gasket Hub Cap
Hub Cap Q-871 Hub
Bolt Hex Head 5/16 X 1/2 Grade 5 Zp
Cotter Pin
Nut Wheel (913571)
Stud Wheel (953033)
Axle Single 2400 Gallon 20000# 480/80R50 1.5” Offset Wheel
Axle, Spacer Dual, 62 1/2"-120" Wheel Track
Axle, Spacer Dual, 80"-120" Wheel Track
Axle, Spacer Dual, 88"-132" Wheel Track
Seal NI906979
Cone Inner NI910346
Cup Inner NI910334
Hub 10 Q881 W/Cups
Cup Outer NI910384
Cone Outer NI0910347
Washer Spindle Q9881
Hub Cap NI909921
Bolt Hex Head 5/16 X 1/2 Grade 5 Zp
Gasket Hub Cap
Nut Castle NI913571
Cotter Pin Q881 Hub
Nut Wheel NI913571
Stud Wheel NI953035 3/4-16 X 3.5”
Spacer Dual 30" Rows WR 20308 13.75” Spacer
Spacer Dual 22" Rows WR 20312 7” Spacer
Spacer Dual 20" Rows WR 20306 5” Spacer
Axle, 72" Spacing, 15,000 Lb
Axle, 76" Spacing, 15,000 Lb
Axle, 80" Spacing, 15,000 Lb
Axle, 132" Spacing, 15,000 Lb
Axle, 88" Spacing, 20,000 Lb
Axle, 132" Spacing, 20,000 Lb
8300 Series Applicator 15
Qty.
1
2
2
2
2
2
2
2
2
2
2
8
2
20
20
1
Optional
Optional
Optional
2
2
2
2
2
2
2
2
2
2
2
2
20
20
Optional
Optional
Optional
AR
AR
AR
AR
AR
AR
www.fastdist.com
8300 Applicator
Tire & Rim
3
2
1
Units With Yellow Tanks
Item
Vendor Part #
Fast Part #
2
2
1
1
3
3
TT5123180057201R
TT5123180057201L
TT05201140057201L
TT05201140057201R
TT05193450057201L
TT05193450057201R
700002
700003
700087
700088
700020
700021
Description
380/90R46 LR149 Tire/Wheel Yellow RH
380/90R46 LR149 Tire/Wheel Yellow LH
480/80R50LR176 Tire/Wheel Yellow RH
480/80R50 LR176 Tire/Wheel Yellow LH
380/90R46 LR 149 Tire/Wheel Yellow Dual LH
380/90R46 LR 149 Tire/Wheel Yellow Dual RH
8310 / 8313
8318
8324
1
1
1
1
1 Opt.
1 Opt.
2 Opt.
2 Opt.
1
1
2 Opt.
2 Opt.
8310 / 8313
8318
8324
1
1
1
1
1 Opt.
1 Opt.
2 Opt.
2 Opt.
1
1
2 Opt.
2 Opt.
Units With White Tanks
Item
Vendor Part #
Fast Part #
2
2
1
1
3
3
TT5123180040701R
TT5123180040701L
TT05201140040701L
TT05201140040701R
TT05193450040701L
TT05193450040701R
700001
700000
700085
700086
700034
700035
Description
380/90R46 LR149 Tire/Wheel Silver RH
380/90R46 LR149 Tire/Wheel Silver LH
480/80R50LR176 Tire/Wheel Silver RH
480/80R50 LR176 Tire/Wheel Silver LH
380/90R46 LR 149 Tire/Wheel Silver Dual LH
380/90R46 LR 149 Tire/Wheel Silver Dual RH
www.fastdist.com
16
8300 Series Applicator
8300 Applicator
1050 - 2400 Tank Parts
15
18 17
21
1
2
20
19
16
11
12
13, 14
10
9
8
7
3
6
4
Item Vendor Part # Fast Part #
1
NS
NS
NS
NS
NS
NS
NS
2
3
3
4
5
6
7
8
9
NS
10
11
NS
12
13
14
15
16
17
18
19
20
21
570085
570084
570087
570086
570089
570088
570091
570090
570070
530116
530350
96SASUMP96
530164
510022
530151
530143
570097
570092
114
570038
570044
228
257
116
510025
510023
540007
530004
530331
530163
530051
5
Description
Tank 1050 Gallon Yellow
Tank 1050 Gallon White
Tank 1350 Gallon Yellow
Tank 1350 Gallon White
Tank 1800 Gallon Yellow
Tank 1800 Gallon White
Tank 2400 Gallon Yellow
Tank 2400 Gallon White
Lid Assembly
Fitting Tank (BJMBF150200BD)
Fitting Tank (BJMBF222BD)
Sump Fitting W/Elbow
3 Inch Polypro Tank Flange Assembly
Hose 3/4 Flo-Rite Faucet Clear
3/4 Inch Poly Street Elbow - 90 Degree
Bushing Reducer 1-1/4 To 3/4'' NPT
Tank 10 Gallon Rinse Yellow
Tank 10 Gallon Rinse White
Bolt Hex Head 5/16 X 3/4'' Grade 5 Zp
Tank 2.5 Gallon Rinse Yellow
Tank 2.5 Gallon Rinse White
Hut Hex Nylock Zp
Washer Flat 5/16" Zp
Bolt Hex Head 5/16 X 1-1/2'' Grade 5 Zp
Hose Overflow 2"
Burp Tube Pump
Clamp T Bolt
1/4" X 1/4" Male Elbow
2" Vent Cap Without Screen
2" Poly Tank Fitting
2" MPT X 2" Hose Shank - 90
8300 Series Applicator 17
8310
1
1
8313
1
1
1
1
1
1
1
1
8318
1
1
8324
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1) USED ON 10 GA OPT.
1) USED ON 10 GA OPT.
1) USED ON 10 GA OPT.
6) USED ON 10 GA OPT.
1
1
1
1
OPT. W/ WHITE TANK
4
4
4
4
4
4
4
4
4
4
4
4
7 Ft
7 Ft
7 Ft
7 Ft
18 Ft
18 Ft
18 Ft
18 Ft
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
www.fastdist.com
8300 Applicator
Center, Inner And Outer Wing Section
37
30
26
48
41
47
36
49
8
20
38
39
15
12
17
43
3
14
25
22
35
4
5
33
44
19
26
28
21
12
12
24
34
13
45
29
27
22
40
32
16
2
42
31
10
6
1
18
30
11
9
23
www.fastdist.com
18
7
46
8300 Series Applicator
8300 Applicator
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
115
131
153
155
158
170
185
213
225
236
237
239
240
241
250
261
285
477
488
592
707
759
8339
17026
17044
17053
17060
17063
17076
17079
17080
17083
17142
17143
17170
17808
17814
17834
17836
17887
17897
540051
540052
540054
590179
710005
800109
800110
800111
Description
Bolt, 5/16 X 1” Grade 5 ZP
Bolt, 3/8 X 2-1/2” Grade 5 ZP
Bolt, 1/2 X 1-1/2” Grade 5 ZP
Bolt, 1/2 X 2-1/2” Grade 5 ZP
Bolt, 1/2 X 4” Grade 5 ZP
Bolt, 5/8 X 2” Grade 5 ZP
Bolt, 3/4 X 2-1/2” Grade 5 ZP
Nut, 3/8” ZP
Nut, Jam, 3/4” ZP
Nut, Centerlock, 5/16” ZP
Nut, Centerlock, 3/8” ZP
Nut, Centerlock, 1/2” ZP
Nut, Centerlock, 5/8” ZP
Nut, Centerlock, 3/4” ZP
Washer, Lock, 3/8” ZP
Washer, 5/8” ZP
Pin, Hitch, 1/8 X 3-1/8” ZP
Bolt, 5/8 X 8-1/2” Grade 5 ZP
Bolt, 3/4 X 8-1/2” Grade 5 ZP
Bolt, Carriage, 3/8 X 1” Grade 5 ZP
Roll Pin, 3/8 X 2”
Zerk, 1/4” Straight Pipe
Flip Wing Locking Pin
Pin, Down Pressure
Weldment, Center Section
Weldment, Main Wing
Weldment, 1” Pin
Pin, Main Wing
Weldment, Flip Cylinder Link
Pin, Flip Base
Weldment, Flip Linkage
Pin, 8300 Flip Linkage
Tube, Wing Lock
Latch, Overcenter, 8300
Weldment, Flip Wing
Pin, Wing Lock
13 Coulter Extension
Tube Extension Weldment
Tube Extension Weldment
Mount, Overcenter Latch
Light Mount
P-Clamp, 2” With 0.38” Hole
P-Clamp, 3” With 0.38” Hole
P-Clamp, 4” With 0.5” Hole
Washer, 1 X 14 GA ZP
Pin, Lynch, 1/4 X 1-3/4” ZP
Decal, Red Reflector
Decal, Amber Reflector
Decal, Orange Reflector
8300 Series Applicator 19
Qty.
AR
AR
AR
2
2
AR
AR
4
AR
AR
AR
AR
AR
AR
4
AR
2
AR
AR
4
AR
AR
AR
2
1
2
AR
2
AR
AR
AR
AR
AR
AR
AR
2
AR
AR
AR
AR
2
AR
2
2
AR
AR
2
2
2
www.fastdist.com
8300 Applicator
Gauge Wheel
7
3
2
1
5
6
16
14
15
17
13
4
11
12
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
NS
NS
216
253
19055L
19060L
19061
590017
590108
700023
730026
730030
730031
730032
730033
730034
730035
730036
730044
19055R
19060R
9
10
Description
Nut, 5/8” ZP
Washer, Lock, 5/8” ZP
LH Gauge Wheel Mount
LH Gauge Wheel Arm
Pin, Gauge Wheel Mount
Pin, Hitch, 1/8 X 3-1/8” ZP
U-Bolt, 5/8 X 7-1/16” X 8-1/2”, ZP
Tire, 20.5 X 8 X 10”, Yellow
Hub, 5 Bolt, With Cups
Nut, Wheel, 1/2” ZP
Seal
Bearing, Inner, LM67048
Pin, Cotter, 905936
Washer, 913608
Nut, Castle, 912953
Bearing, Outer, LM11949
Cap, Hub, 909907
RH Gauge Wheel Mount
RH Gauge Wheel Arm
www.fastdist.com
20
8
Qty.
1
4
AR
AR
1
1
2
1
1
5
1
1
1
1
1
1
1
AR
AR
8300 Series Applicator
8300 Applicator
Mounting Clamp Kit For Ausherman Coulter Option
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
7
7
8
NS
804-022C
803-021C
804-015C
803-020C
802-091C
204-189D
806-083C
806-084C
806-131C
204-224K
204-228K
750046
750047
Description
Washer Lock Spring 5/8
Nut Hex 5/8-11
Washer Lock Spring 1/2
Nut Hex 1/2-13 Plt
Hex Bolt 1/2-13 X 1-1/2 Grade 5
7” Split Bar Clamp
U-Bolt 5/8-11 X 7 1/32 X 7 1/2, Use With 204-228k
U-Bolt 5/8-11 X 7 1/32 X 9 1/2, Use With 204-224k
U-Bolt 5/8-11 X 7 1/32 X 6, Use With 204-243k
7 X 7” Square Bar Clamp Kit
7 X 5” Rectangle Bar Clamp Kit
8300 Series Applicator 21
Qty.
4
4
2
2
2
2
2
2
2
AR
AR
www.fastdist.com
8300 Applicator
Ausherman Vantage II Fertilizer Coulter
Item Vendor Part # Fast Part #
1
2
NS
3
4
5
6
7
807-124C
820-181C
820-182C
804-022C
803-021C
802-064C
804-023C
204-154D
750026
Description
Qty.
21” Flat Bar Angled Coulter Shank
Vanll 5" Offset Flat Shank RH (Shown)
Vanll 5" Offset Flat Shank LH
Washer Lock Spring 5/8
Nut Hex 5/8-11 Plt
Hex Head Cap Screw 3/4-10 X 2 Grade 5
Washer Lock Spring 3/4
Front Shield
www.fastdist.com
22
8300 Series Applicator
8300 Applicator
Item Vendor Part # Fast Part #
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
42
44
45
46
47
804-025C
817-051C
204-209H
204-233V
204-235V
200-001D
805-017C
803-029C
804-055C
822-020C
822-021C
816-009C
805-063C
204-234V
204-236V
817-029C
807-074C
204-107D
812-031C
803-025C
817-084C
807-089C
807-090C
820-093C
802-354C
204-145D
804-015C
803-020C
802-281C
804-019C
201-141D
204-142D
204-153D
198-057S
822-095C
814-083C
803-013C
801-015C
204-268D
816-134C
820-124C
820-125C
802-406C
838-482C
800-001C
800-073C
890-580C
204-412H
204-413H
750025
Description
Washer Flat 3/4 SAE
Swing Arm Bushing
Blade Spring Rod Weldment
Coulter Pivot Rh Sub-Assembly (Shown)
Coulter Pivot LH Sub-Assembly
Hub Grease Cap
Pin Cotter 3/16 X 1-3/4
Nut Hex Slotted 7/8-14
Washer Spindle - 7/8
Bearing Cup LM-67010 (Not Shown)
Bearing Cone LM-67048
Oil Seal Double Lip
Pin Cotter 3/32 X 1 Long
Blade Arm RH Sub-Assembly (Shown)
Blade Arm LH Sub-Assembly
Bushing Coulter Casting
Spring 2.25 OD X .5 Coil
Spring Rod Sleeve 1-1/8 OD
Casting Coulter Spring Washer
Nut Hex 3/4-10 Plt Nylock
Parallel Arm Pivot Bushing
Torsion Spring 3/8 Wire RH (Shown)
Torsion Spring 3/8 Wire LH
Single Bevel 18 Coulter Blade
Plow Bolt 1/2-13 X 1-1/2 Grade 5
Coulter Hub
Washer Lock Spring 1/2
Nut Hex 1/2-13
Hex Head Cap Screw 5/8-11 X 2-3/4 Grade 5
Washer Flat 5/8 USS
Wiper Wheel Arm RH (Shown)
Wiper Wheel Arm LH
Wiper Wheel Spacer
2 x 13 Depth Wheel Assembly
Press Wheel Brg Only
Press Wheel Tire Only
Nut Lock 3/8-16 Plt
Screw Set Socket Head 1/4-20 (1/2)
Dry Fertilizer Tube Collar
Rubber Pad
Dry Fertilizer Tube RH
Dry Fertilizer Tube LH
RHSNB 3/8-16 (1-3/4 SS)
Decal Gp Planting Components
Grease Zerk Straight 1/4-28
Grease Zerk 1/4-28 X 90°
Vantage II Liquid Insert
Vanll RH Dry Drop Tube Weldment (shown)
Vanll LH Dry Drop Tube Weldment
8300 Series Applicator 23
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
www.fastdist.com
8300 Applicator
Coulter Assembly
1
2
3
4
5
6
7 8 9
10
11
12
13
14
15
16
17
46
18
45
19
20
21
44
43
22
23
24
42
25
41
26
40
39
27
36
38
37
28
35
34
33
32
31
www.fastdist.com
24
30
29
8300 Series Applicator
8300 Applicator
Item
1
2
NS
NS
NS
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
NS
42
43
44
45
46
Vendor Part #
N369
N343
N345
Fast Part #
590005
750012
750055
750054
750053
186
FPC510
N367-1
FBU6B0
N347-7
N347-5
S233
N347-3
FBH0816-SS
FBS0602
COI100-7
TJ-4676-22-1/4
TJ-CP4916-250
TJ-CP3655-5-SS
TJ-CP7671-5/16/SS
TJ-39189-8400-406-SS
TJ-CP1321-SS
TP-00xx-SS
FNJ08-SS
TJ-CP1325SS
FNJL08-SS
FNL12-NF
N347-47
N347-6
N342
W40-2
W32
W38
FBC0806
W23Y
W23
FNH08
W60
FPC497
W50
N347-1
N347-2
N347-2/45
FBS1004
FPC505
FWM18
233
750010
750018
750016
530199
530246
530188
520014
750009
750015
750011
750014
750008
216
253
Description
Casting Clamp
1-1/2" Straight Coulter Shank
1-1/2" Offset Coulter Shank
1-1/2" Offset Coulter Shank Special
1-1/2" Offset Coulter Shank Special
Bolt Hex Head 3/4x3 Grade 5 Zp
Cotter Pin 5/16" X 3
Clamp Plate
U-Bolt 7 X 8-1/2 X 5/8 E-Coat
Bushing Nylon For Spring Rod
Spring Rod
Spring Coulter
Spring Bushing Casting
Nut Hex Head 3/4 Nylock Zp
Bolt Hex Head 1/2 X 4 Grade 5 SS
Set Screw 3/8 X 1/2"
Rock Guard
Nipple, Pipe 1/4 X 5 SS
Elbow, Street 1/4" NPT SS
Hose Shank Check Valve Assembly Items 17-21
Adapter 11/16" X 1/4" NPT
Orifice Plate 302 SS
Spring 5# 302 SS
Ball 302 SS
Hose Shank 11/16 X 1/4" NPT 303 SS
Teejet Body SS
Tip SS Teejet (Specify Tip Size)
Hut Hex Head Jam 1/2" SS
Nozzle Cap SS
Nut Hex Head Nylock 1/2" SS
Nut Hex Head 3/4" Nf Zp
Swing Arm W Hub
Bushing Coulter Flanged
Coulter Ripple 20"
Seal Coulter 2 Piece
Bearing
Cup
Bolt Carriage 1/2" X 1-1/2"Zp
Hub Assembly Complete (Items 31-33,35,37-39)
Hub Only
Nut Hex Head 1/2: Zp
Nut Spindle 5/8"
Pin Cotter 1/8" X 1-1/4"
Cap Hub
Coulter Hinge Casting
Locking Collar 30 Degree
Locking Collar 45 Degree
Setscrew 5/8" X 1"
Pin Cotter 1/8" X 1-1/4"
Bushing 1/8" Thick
Nut Hex Head 5/8" Zp
Washer Lock 5/8"
8300 Series Applicator 25
Qty.
2
1
AR
1
1
1
2
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
4
1
1
4
1
1
1
1
1
OPT.
1
1
1
4
4
www.fastdist.com
8300 Applicator
Knife Assembly
9
10
8
11
7
5
6
12
6
4
17
13
14
3
2
18
19
2
16
1
Item
1
2
3
4
5
6
7
8
9
10
11
12
NS
13
14
15
16
17
18
19
Vendor Part #
15
6
Fast Part #
FBH0813
260
155
WI-CO501000
750003
CLN3934
750019
BR-64006H
540011
BS-3/8BH200
510020
VI-316A1438
530247
VI-304SE14
530246
39188-8400-406-SS 530188
BS-3/8BH200
510020
18720-112-785-NYB 520004
18719-111-785-NYB 520003
CP4916-XX
CP4916-XX
CP18999EPR
590029
8400-406-NYB
590077
CP25607-1-NY
590076
215
252
603
Description
Bolt Hex Head 1/2 X 3-1/4 Zp Grade 5
Washer Flat 1/2" Zp
Bolt Hex Head 1/2 X 2-1/2 Zp Grade 5
Wiese CO50100 Knife
Mounting Bracket And Shim Kit
Clamp Hose 5/16"
Hose EDPM 3/4" X 4''
Hose Barb 1/4" MPT X 3/8" Hose
Elbow Street 1/4" MPT
Valve Check 1/4" MPT X 3/8" Hose
Hose EDPM 3/4" X 54''
Tee 3/4" Hose Barb
L 3/4" Hose Barb
Orifice Disc 4916-XX See Rate Chart
Gasket Orifice Disc
Hose Shank 3/8"
Cap Nozzle Black
Nut Hex Head 1/2" Zp
Washer Lock 1/2" Zp
Bolt Hex Head 1/2 X 1-3/4'' Zp Grade 5
www.fastdist.com
26
Qty.
1
2
1
1
1
4
1
1
1
1
1
AR
AR
1
1
1
1
3
3
1
8300 Series Applicator
8300 Applicator
8310 - 8313 2 Inch Quick Fill
9
5
11
11
5
7
12
2
12
6
4
10
1
3
8
Item
1
2
3
4
5
6
7
8
9
10
11
12
Vendor Part #
MVSF220FP
AP12012805
200Cap
200G
300G
M220BRB
M300220BRB90
HN7912
M300CPG90
FC220
FC300
TC231
Fast Part #
500035
510003
530017
530019
530024
530103
530112
530179
530333
540002
540003
540007
Description
Valve, 2” Full Port Manifold
Hose, 2” fertilizer
2” Cap
Gasket, 2” EPDM
Gasket, 3” EPDM
2” Full Port Manifold X 2” Hose Barb
3” Manifold X 2” Hose Barb 90°
Lanyard
3” Manifold Coupler, 90°
Clamp, 2” Full Port
Clamp, 3"
Clamp, 2”, T Bolt
8300 Series Applicator 27
Qty.
1
1
1
1
2
1
1
1
1
1
2
2
www.fastdist.com
8300 Applicator
8310 - 8313 3 Inch Quick Fill
11
4
10
11
4
6
12
2
12
5
4
11
7
1
4
11
9
4
11
8
3
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
8
9
10
11
12
MV300CF
AP12012810
300Cap
300G
M300BRB
M300BRB90
HN7912
M300A
M300CPG45
M300CPG90
FC300
TC343
500042
510004
530023
530024
530113
530114
530179
530233
530234
530333
540003
540009
Description
Valve, 3” Manifold
Hose, 3” fertilizer
Cap, 3”
Gasket, 3” EPDM
3” Manifold X 3” Hose Barb
3” Manifold X 3” Hose Barb 90°
Lanyard
3” Manifold X 3” Male Adapter
3” Manifold Coupler, 45°
3” Manifold Coupler, 90°
Clamp, 3”
Clamp, 3” T Bolt
www.fastdist.com
28
Qty.
1
1
1
5
1
1
1
1
1
1
5
2
8300 Series Applicator
8300 Applicator
8318 - 8324 2 Inch Quick Fill
7
5
10
2
10
6
4
9
1
3
8
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
8
9
10
MVSF220FP
AP12012805
200Cap
200G
HB200-90
M220BRB
RB300-200
HN7912
FC220
TC231
500035
510003
530017
530019
530051
530103
530145
530179
540002
540007
Description
Valve, 2” Full Port Manifold
Hose, 2” Fertilizer
2” Cap
Gasket, 2” EPDM
2” MPT X 2” Hose Barb 90°
2” Full Port Manifold X 2” Hose Barb
3” MPT X 2” FPT Reducer
Lanyard
Clamp, 2” Full Port
Clamp, 2”, T Bolt
8300 Series Applicator 29
Qty.
1
1
1
3
1
1
1
1
1
3
www.fastdist.com
8300 Applicator
8318 - 8324 3 Inch Quick Fill
5
11
2
11
6
4
10
7
1
4
10
9
4
10
8
3
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
8
9
10
11
MV300CF
AP12012810
300Cap
300G
HB300-90
M300BRB
HN7912
M300A
M300CPG45
FC300
TC343
500042
510004
530023
530024
530053
530113
530179
530233
530234
540003
540009
Description
Valve, 3” Manifold
Hose, 3” Fertilizer
Cap, 3”
Gasket, 3” EPDM
3” Hose Barb Elbow 90°
3” Manifold X 3” Hose Barb
Lanyard
3” Manifold X 3” Male Adapter
3” Manifold Coupler, 45°
Clamp, 3”
Clamp, 3” T Bolt
www.fastdist.com
30
Qty.
1
1
1
3
1
1
1
1
1
3
2
8300 Series Applicator
8300 Applicator
8310 - 8313 Tank To Pump Plumbing
11
5
17
5
10
17
18
14
16
9
4
1
12
18
4
4
6
16
16
19
9
15
2
19
8
3
4
4
16
16
13
7
20
4
16
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
NS
NS
Vendor Part #
AP12012805
1BH200
100G
200G
300G
M100BRB90
M220100TEE
M220BRB
M200CPG90
M300220BRB
M300TEE
MLS22230
M300220CPG
MVS220CF
FC100
FC220
FC300
TC231
64016H
9306C-HM1C-UB
FMC150FHYD206
FMC205FHYD304
Fast Part #
510003
510016
530013
530019
530024
530067
530099
530103
530106
530111
530115
530125
530316
530327
540000
540002
540003
540007
540014
550011
550000
550025
Description
Hose, 2”, Fertilizer
Hose, 1” EPDM
Gasket, 1” EPDM
Gasket, 2” EPDM
Gasket, 3” EPDM
1” Manifold X 1” Hose Barb 90°
2” Full Port Manifold X 1” Flange Tee
2” Full Port Manifold X 2” Hose Barb
2” Full Port Manifold Coupler, 90°
3” Manifold X 2” Hose Barb
3” Manifold Tee
2” Full Port Line Strainer
3” Manifold Reducer X 2” Coupler
2” Manifold Stubby Valve
Clamp, 1”
Clamp, 2” Full Port
Clamp, 3”
Clamp, 2”, T Bolt
Clamp, 1”
Pump, Hypro
Pump, Ace, 150-206
Pump, Ace, 205-304
8300 Series Applicator 31
Qty.
AR
AR
1
6
AR
1
1
1
2
1
1
1
AR
1
1
AR
AR
2
2
AR
AR
AR
www.fastdist.com
8300 Applicator
8318 - 8324 Tank To Pump Plumbing
12
5
12
5
1
9
12
5
7
12
5
6
14
3
11
8
4
14
13
2
12
15
5
5
12
8
13
10
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NS
NS
NS
NS
NS
Vendor Part #
MV220CF
AP12012805
100G
1BH200
200G
M100BRB
M220100TEE
M220BRB90
M200CPG90
MLS22230
FC100
FC220
TC287
64016H
9306C-HM1C-UB
FMC150FHYD206
FMC205FHYD304
M300220CPG
FC300
300G
Fast Part #
500006
510003
530013
510016
530019
530066
530099
530104
530106
530125
540000
540002
540008
540014
550011
550000
550025
530316
540003
530024
Description
Valve, 2” Full Port Manifold
Hose, 2”, Fertilizer
Gasket, 1” EPDM
Hose, 1” EPDM
Gasket, 2” EPDM
1” Manifold X 1” Hose Barb
2” Full Port Manifold X 1” Flange Tee
2” Full Port Manifold X 2” Hose Barb 90°
2” Full Port Manifold Coupler, 90°
2” Full Port Line Strainer
Clamp, 1”
Clamp, 2” Full Port
Clamp, 2” T Bolt
Clamp, 1”
Pump, Hypro
Pump, Ace, 150-204
Pump, Ace, 205-304
3” Manifold Reducer X 2” Coupler
Clamp, 3”
Gasket, 3” EPDM
www.fastdist.com
32
Qty.
1
AR
1
AR
6
1
1
2
1
1
1
6
2
2
AR
AR
AR
AR
AR
AR
8300 Series Applicator
8300 Applicator
Ace 150-206 Pump Hydraulic Motor
25
27
26
14
29
15
6
16 17
8
7
28
18
10
9
12
13
4
11
6
3
2
20
5
19
1
24
21
REF . #
1*
2*
3
4
5
6
7*
8
9
10*
11
12
13
14
15
16*
17
18
19
20
21
22
23
24
25
26
27
28
29
#
MODE L
204N
S 200
40153
41941
41961
41731
42041
42044
42042
42043
41850
41720
41800
41742
41900
42010
42030
42040
40960
41761
41920
41970
41990
41980
41750
41455
41448
41457
41875
41441
41374
MODE L
206N
S 200
40153
41941
41961
41731
42041
42044
42042
42043
41850
41721
41801
41742
41900
42010
42030
42040
40960
41764
41921
41971
41990
41980
41751
41455
41448
41456
41875
41441
41374
MODE L
210N
S 200
40153
41941
41961
41731
42041
42044
42042
42043
41850
41725
41805
41742
41905
42010
42030
42040
40960
41766
41925
41975
41990
41980
41755
41455
41448
41456
41875
41441
41374
22
23
D ES CR IPTION
R EQUIR ED
Seal support spacer
Seal cartridge
Snap ri ng, beari ng
Bal l beari ng, 7/16" I.D .
Dri ve pl ate
Val ve cap, coasti ng check
"O" ri ng, coasti ng check
Spri ng, coasti ng check
Bal l , coasti ng check
"O" ri ng, housi ng seal
Gear housi ng
Dow el pi n, housi ng
End pl ate
Cap screw, 1/4" N .C . hex head
Adj usti ng screw, needl e val ve
Thread seal , 3/8", needl e val ve
Washer, fl at steel , needl e val ve
Nut, 3/8" N .C. j am, needl e val ve
Dri ve shaft
Dow el pi n, dri ve shaft
Idl er shaft
Bal l , i dl er shaft
Retai ni ng ri ng, i dl er gear
Gear
Adapter body, #8 SA E mal e x 1/2" N PT
"O" ri ng, ori fice i nsert (use w i th 41456 i nsert)
Insert, restri ctor ori fi ce (use w i th 41455 body)
"O" ri ng, #8 SAE mal e fi tti ng
Reverse check, #8 S AE mal e x 1/2" N PT
Repai r K it, R K-B AC-75-H YD -L
1
1
2
1
1
1
1
1
1
2
1
2
1
2
1
1
1
1
1
1
1
1
2
2
1
1
1
2
1
--
8300 Series Applicator 33
www.fastdist.com
8300 Applicator
Ace 150-206 Pump
6
3
4
7
8
5
2
23
1
24
26
25
9
21
20
15
19
18
16
12
12
6A 10
REF. #
1
1
2
2
3
3
4
5
5
6
6
6A
7
8
8
9
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26


#
PART NUMBER
BAC-53
41120
BAC-12-150-FLG
BAC-12-150-SS
BAC-23-A
BAC-23-A-SS
BAC-24-HYD-SS
BAC-26-150-P
BAC-26-150-CI
BAC-7V
BAC-7SC
40160
BAC-4-150
BAC-14-150-HYD
BAC-14-150-HYD-SS
40950
40930
BAC-54
BAC-33
BAC-37
BAC-32
BAC-32-S
BACH-25
BAC-6-HYD-SS
BAC-75-HYD-206
S200
BAC-75-HYD-206N
41255
41875
BAC-78-8SAE
BAC-80-8SAE
41448
BAC-79-7
LS-206N
RK-FMC-150
RK-FMCSC-150
RK-BAC-75-HYD-L
EDP #
41110
41120
40257
40249
40391
40392
40400
40446
40445
40151
40152
40160
40015
40305
40319
40950
40930
41130
40810
40870
40790
40795
40420
40061
41372
40161
41397
41255
41875
41441
41455
41448
41456
41418
52710
52711
41374
14
13
22
17
11
13
11
DESCRIPTION
Pipe plug
Pipe plug, stainless steel (optional)
Volute, cast iron, NPT & flanged (for 150F models)
Volute, 316 stainless steel , NPT & flanged (for 150FS models)
Nut, 3/8” NF, cad plated
Nut, 3/8” NF, stainless steel (optional)
Washer, 3/8” star, stainless steel
Impeller, Valox, keyway
Impeller, cast iron, keyway (optional)
Seal, carbon/ceramic/Viton (includes 40160 O-Ring)
Seal, silicon carbide/Viton (includes 40160 O-Ring) (optional)
O-ring, shaft seal
O-ring, body seal
Mounting frame, cast iron (for 150F models)
Mounting frame, 316 stainless steel (for 150FS models)
Cap screw, 3/8” NC x 3/4” hex head
Cap screw, 3/8” NC x 3/4” hex head, stainless steel (optional)
Slinger
Snap ring, internal, BAC-14 mounting frame
Ball Bearing, sealed, BAC-6 shaft
Snap ring, external, BAC-6 shaft
Spacer for BAC-6 shaft
Key, 1/8” x 1/8” x 1/2”
Shaft, 5/8” diameter, keyway and tang slot, stainless steel
Hydraulic motor, 7 GPM (includes parts 18 - 25)
Seal support spacer for 200 Series HYD motor
Hydraulic motor, 7 GPM (motor only - no external fittings)
Cap screw, 5/16” N. C. x 3-3/4” socket head (for 206N motor)
O-ring, #8 SAE fitting
Reverse check valve, #8 SAE male x 1/2” NPT female
Adapter, restrictor body, #8 SAE male x 1/2” NPT female
O-ring, orifice insert
Orifice, restrictor insert, .109 (206N)
Flow limiting valve (206N), #8 SAE male x 1/2” NPT female
Repair kit for FMC-150 series pump
Repair kit for FMC-150 series with silicon carbide shaft seal
Repair kit for 200-L Series motor
www.fastdist.com
34
REQ.
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
2
2
2
1
1
1
1
1
1
4
2
1
1
1
1
1
-
8300 Series Applicator
8300 Applicator
Optional Hypro Pump
9
16
11
13
3
6
7
2
12
10
1
42
2
41
43
29
44
20
39
40
21
28
26
27
5
30
23
36
30
24
38
8
22
35
32
33
37
31
25
34
4
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
ITEM
NO.
0533-2500
0254-2500C2
SHAFT
END PLATE ASSY
1
1
44
43
0150-2500C
6031-0373
BODY ASSY-SMALL PILOT
CE STICKER LABEL
1
1
42
41
6031-0343
6031-0340
6031-0325
INSTRUCTION TAG
LABEL READY FOR ROUND UP
DECAL
1
1
1
40
39
38
1
1
37
36
1
35
1
1
34
33
1
4
4
32
31
30
3435-0171
3031-0134
2270-0076
2270-0071
2270-0041
2253-0002
2210-0020
2210-0005
PACKING KIT
CARTON - INDIVIDUAL
TAG
IMPELLER WASHER
WASHER
ALCNUT 0.3750-24-N
CAP SCREW, HEX HEAD 3/8"-16 X 7/8"
CAP SCREW, HEX HEAD 5/16"-18 X 7/8"
3900-0022
3360-0023A
3320-0052A
GEROTOR
1
ADAPTER-INLET PORT ASSY
CHECK VALVE ASSY - TANK PORT
1
1
3220-0029
2270-0039
2220-0021
VALVE STEM
WASHER, FLAT 5/16"
SCREW, SOCKET HEAD
1
4
4
2104-0010
2029-0010
LIP SEAL
BEARING RACE, THRU
1
2
2029-0009
BEARING, THRUST
1
2000-0010
1820-0013
BEARING, BALL
INT. RET. RING
1
1
1810-0026
1810-0014
1720-0268
RETAINING RING
RETAINING RING
O-RING
1
1
2
O-RING
NUT, SEALING
HM1 & HM5 Round Key
2
1
1
2120-0039
1720-0083
SEAL, MECHANICAL
O-RING
1
1
29
28
1720-0110
1700-0245
1610-0031
1610-0012
1410-0056
WOODRUFF KEY
SLINGER SEAL
1
1
27
26
1600-0044
DOWEL PIN
1
1600-0037
DOWEL PIN
1
MOUNTING FLANGE
1
25
1
1
24
23
ITEM
NO.
0750-9300C2
0401-9200P2
0158-9200C
PART
NUMBER
IMPELLER (CW ROTATION)
PUMP HOUSING, 300x220 U.FLG
DESCRIPTION
QTY.
1410-0131
1410-0130
0700-2500C1
PART
NUMBER
CARTRIDGE, FRONT
SPACER, 3L SEAL
GEROTOR HOUSING HM1, COATED
8300 Series Applicator 35
DESCRIPTION
1
1
1
QTY.
www.fastdist.com
8300 Applicator
8310 - 8324 Agitation And Control
2
3
4
5
6
7
1
Item Vendor Part # Fast Part #
1
2
3
4
5
6
7
*AR*
1BH200
Y9270-PP
Tee075
NIP0756
TF075
HB07510090
64016
510016
520029
530156
530130
530160
530036
540014
Description
Hose 1" EDPM
Agitation Nozzle
Tee 3/4" NPT
Nipple 3/4" X 6
Bulkhead 3/4" NPT
Hose Barb Elbow 3/4" NPT X 1" Hose
Clamp 1" Hose
Qty.
AR
2
1
1
1
1
2
Quantities dependent on # of Ball Valve on unit.
www.fastdist.com
36
8300 Series Applicator
8300 Applicator
8300 Series Applicator 37
www.fastdist.com
8300 Applicator
8310 - 8313 Pump To Ball Valve
20 or 21 7 or 8
10 or 14
20 or 21
7 or 8
10 or 14
6
19
20 or 21
7 or 8
9
11 or 15
19
6
5
2
22
9
6
19
1
6
4
19
11
23
7
24
23
20
26
7
23
23
20
13
7
20
25
12
11
4
20
7
20
20
11
7
3
20
7
12
7
17
18
5
16
22
www.fastdist.com
38
8300 Series Applicator
8300 Applicator
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Vendor Part #
MPRV100100
MV100CF
451BEC-3FB
11/2BH200
1BH200
100G
150G
200G
M100BRB
M200100TEE
M200150BRB
M200CPG90SH
M200PLG025
M220100TEE
M220150BRB
CP45523-NYB
CP37166-1-302SS
CP7717-3-912-VI
FC100
FC200
FC220
64016H
64024H
0630171793
0630171894
FAST4154GXX160
Fast Part #
500004
500005
500029
510014
510016
530013
530014
530019
530066
530075
530079
530089
530094
530099
530100
530190
530193
530198
540000
540001
540002
540014
540016
631804
631805
790020
Description
Valve, 100 PSI Relief
Valve, 1” Full Port
1 Valve Manifold
Hose, 1-1/2” EPDM
Hose, 1” EPDM
Gasket, 1” EPDM
Gasket, 1-1/2” EPDM
Gasket, 2” EPDM
1” Manifold X 1” Hose Barb
2” Manifold X 1” Tee
2” Manifold X 1-1/2” Hose Barb
2” Manifold Coupler, 90° Short
2” Manifold Plug W/ 1/4” FPT
2’ Full Port X 1” Flange Tee
2” Full Port X 1-1/2” Hose Barb
1” 90° Hose Barb, Nylon
Retaining Clip
O-Ring, Viton
Clamp, 1”
Clamp, 2”
Clamp, 2” Full Port
Clamp, 1”
Clamp, 1-1/2”
Flow Meter, 60P
Control Valve, 1-1/2”
Gauge, 160 PSI
Qty.
1
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
2
1
AR
AR
AR
AR
AR
AR
AR
AR
AR
4
1
1
1
NOTE: Hypro 9306 and Ace 205 pump outlets require 220 fittings.
Ace 150 pump outlet requires 200 fittings.
8300 Series Applicator 39
www.fastdist.com
8300 Applicator
8318 - 8324 Pump To Ball Valve
26 or 27
7 or 8
12 or 19
26 or 27
11
7 or 8
24
6
13 or 20
25
2
29
6
25
4
29
25
6
6
1
9
13
25
6
10
28
5
32
22
16
7
21
3
26
23
5
28
17
7
30
26
26
7
15
29
7
7
7
26
26
26
18
13
7
4
29
26
14
26
www.fastdist.com
40
7
31
8300 Series Applicator
8300 Applicator
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Vendor Part #
MPRV100100
MV100CF
451BEC-3FB
11/2BH200
1BH200
100G
150G
200G
M100BRB
M100BRB90
M100PLG
M200100TEE
M200150BRB
M200150BRB90
M200CPG45
M200PLG
M200PLG025
M200TEE
M220100TEE
M220150BRB
CP45523-NYB
CP37166-1-302SS
CP7717-3-912-VI
M100TEE
FC100
FC200
FC220
64016H
64024H
0630171793
0630171894
FAST4154GXX160
Fast Part #
500004
500005
500029
510014
510016
530013
530014
530019
530066
530067
530070
530075
530079
530080
530087
530093
530094
530097
530099
530100
530190
530193
530198
530298
540000
540001
540002
540014
540016
631804
631805
790020
Description
Valve. 100PSI Relief
Valve, 1” Full Port
1 Valve Manifold
Hose, 1-1/2” EPDM
Hose, 1” EPDM
Gasket, 1” EPDM
Gasket, 1-1/2” EPDM
Gasket, 2” EPDM
1” Manifold X 1” Hose Barb
1” Manifold X 1” Hose Barb 90°
1” Manifold Plug
2” Manifold X 1” Tee
2” Manifold X 1-1/2” Hose Barb
2” Manifold X 1-1/2” Hose Barb 90°
2” Flange Coupler, 45°
2” Manifold Plug
2” Manifold Plug W/ 1/4” FPT
2” Manifold Tee
2’ Full Port X 1” Flange Tee
2” Full Port X 1-1/2” Hose Barb
1” 90° Hose Barb, Nylon
Retaining Clip
O-Ring, Viton
1” Manifold Tee
Clamp, 1”
Clamp, 2”
Clamp, 2” Full Port
Clamp, 1”
Clamp, 1-1/2”
Flow Meter, 60P
Control Valve, 1-1/2”
Gauge, 160PSI
Qty.
1
AR
AR
AR
AR
AR
AR
AR
AR
1
AR
AR
AR
1
AR
1
1
1
AR
AR
AR
AR
AR
1
AR
AR
AR
AR
4
1
1
1
NOTE: Hypro 9306 and Ace 205 pump outlets require 220 fittings.
Ace 150 pump outlet requires 200 fittings.
8300 Series Applicator 41
www.fastdist.com
8300 Applicator
Toolbar Plumbing
8
3
16
14
1
12
9
10
16
7
3
17
5
2
13
11
22
16
6
3
18
19
21
20
12
15
4
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Vendor Part #
UV075FP
IBH200
3/4BH200
3/8BH200
TJ18720111785NYB
18719111785NYB
HB075100
HB075-90
NIP075-SH
TE075
T34100T
3T34F
3T34T
HB075
640006H
64012H
64016H
HCLSS18
CP18999EPR
CP256071NY
8400406NYB
Fast Part #
500043
510016
510019
510020
520004
520003
530039
530040
530131
530156
530181
530220
530221
530230
540011
540013
540014
540050
590029
590076
590077
590187
Description
Valve, 3/4”
Hose 1” EDPM
Hose, 3/4”, EPDM
Hose, 3/8”, EPDM
Nozzle, Double
Nozzle, Single
3/4” MPT X 1” Hose Barb
3/4” MPT X 3/4” Hose Barb 90°
3/4” MPT Short Nipple
3/4” FPT Poly Tee
3/4” MPT X 1” Hose Barb Tee
3/4” FPT X 3/4” Hose Barb Tee
3/4” MPT X 3/4” Hose Barb Tee
3/4” MPT X 3/4” Hose Barb
Clamp, 3/8”
Clamp, 3/4”
Clamp, 1”
Clamp, 4 1/8 - 7”
Seal, EPDM
Cap
Connector, Hose Barb
Mount, Plumbing
www.fastdist.com
42
Qty.
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
AR
8300 Series Applicator
8300 Applicator
Raven SCS450 Console
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
DESCRIPTION
Manual Adj. Switch
Rate1/Rate2/Manual Switch
Power Switch
Boom Switch
Master Switch
Mounting Bracket
Mounting Knob
Fuse Holder
Fuse, 15 Amp.
Console Control Cable (10 ft.)
Console Control Cable (3 ft.)
Flow Control Cable (6 ft.)
Flow Control Cable (12 ft.)
Flow Control Cable (24 ft.)
Flow Meter Cable Ext. (6 ft.)
Flow Meter Cable Ext. (12 ft.)
Flow Ext. Cable (12 ft.)
Flow Ext. Cable (24 ft.)
Assorted Terminal Kit
Switch Cover
1-Set Filler Spacers
Face Plate Assembly
Display Board Spacer
LCD Display Board
Processor Board (Serial Interface)
Connector Plate Assembly (Serial Interface)
Back Assembly
SCS 450 Console (Serial Interface)
RAVEN PART #
412-2011-049
019-0159-078
412-2011-048
412-2003-010
412-2011-046
106-0159-437
106-0159-438
510-2001-018
510-1003-003
115-0159-492
115-0159-707
115-0159-495
115-0159-496
115-0159-708
115-0159-016
115-0159-017
115-0159-493
115-0159-494
117-0159-402
063-0159-734
117-0159-421
063-0172-024
107-0159-478
063-0171-961
064-0159-745
063-0172-022
063-0159-530
063-0171-220
8300 Series Applicator 43
www.fastdist.com
8300 Applicator
Control Console Harness - 155-0171-085
www.fastdist.com
44
8300 Series Applicator
8300 Applicator
Control Console Harness - 155-0159-856
8300 Series Applicator 45
www.fastdist.com
8300 Applicator
Control Console Harness - 155-0171-086
www.fastdist.com
46
8300 Series Applicator
8300 Applicator
Hydraulic System For Pump
1
3
2
5
1
4
8
7
Item
1
2
3
4
5
6
7
8
Fast Part #
Description
2-NV12-12SAE
PA600053-1
PA600054-1
610086
610100
610099
PA600053-2
PA600054-2
610060
610106
610102
PA600053-3
PA600054-3
Hose Tip
Hose Pressure To Valve
Hose Pressure To Valve
Hydraulic Fitting 6801-8-10
PC Valve 7.5 Gpm
PC Valve 13 Gpm
Hose Pressure To Pump
Hose Pressure To Pump
Hydraulic Fitting 6400-08-10
Hydraulic Fitting 6400-10-10
Hydraulic Fitting 6801-10-10
Hose Pump Return
Hose Pump Return
6
8310
8313
8318
8324
2
1
2
1
2
2
1
1
1
1
1
1
Ace
150-206
Hypro
93079
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8300 Series Applicator 47
www.fastdist.com
8300 Applicator
Hydraulic Schematic
1
2
3
4
5
6
33
32
31
30
29
7
8
9
10
28
27
26
11
25
24
23
12
22
21
20
19
13
14
18
17
16
15
www.fastdist.com
48
8300 Series Applicator
8300 Applicator
Item
1
2
3
NS
4
5
6
7
8
9
10
11
12
13
14
15
16
NS
17
NS
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Vendor Part #
Fast Part #
600043-6-ZN
600043-5-ZN
620007
661729
610095
610066
600043-4-ZN
610004
600043-1-ZN
610003
600043-2-ZN
520048
600043-3-ZN
600043-18-ZN
600043-13-ZN
610045
620004
649208
620027
PMI0002
600041-5-ZN
610096
610029
600043-17-ZN
610010
630038
610078
600043-14-ZN
TO24060406
600048-1-ZN
610026
610025
790052
600043-19-ZN
600043-8-ZN
610009
Description
FDM4R17-4FJXZ-4FJX90MZ-153
FDM4R17-4FJXZ-4FJX90MZ-126
Cylinder 40TD08-150 Dia 4 X 8" Stroke
Kit Seal 4.0 Bore X 1.5 Rod
Fitting Adapter 8ORB M/F .093 Orifice
Fitting Adapter JIC Swivel Run Tee TO-6804-06-08-06
FDM6R17-6FJX90MZ-8FJXZ-90
Fitting Adapter Tee 8JIC
FDM8R17-8MBOZ-8FJXZ-156
Fitting Adapter JIC Tee TO-2603-04-04-04
FDM4R17-8MBOZ-4FJX90MZ-306
2-NV12-12SAE-M
FDM6R17-6FJX90MZ-8FJXZ-102
FDM6R17-8MBOZ-6FJXZ-90M-293
FDM6R17-8MBOZ-6FJXZ-285
Fitting Adapter 8ORB TO 4JIC R0.045 (USED ON 620004)
Cylinder 30TD24-150 3" x 24" Stroke
Kit Seal 3.0 Bore x 1.5 Rod
Cylinder Dual Fuction 45WD22.5 X 1.81 WK
Kit Seal 4.5 Bore x 2.0 Rod
FDM4R17-4FJXZ-4FJX90MZ-56
Fitting Adapter 8ORB M/F .047 Orifice
Fitting Adapter 8ORB TO 4JIC 90°
FDM4R17-4FJXZ-4FJXZ-32
Fitting Adapter 6ORB TO 6JIC
Block Down Pressure (1PDCP25-PT-12S)
Fitting Adapter 6ORB TO 6JIC 90°
FDM6R17-6FJXZ-6FJX90MZ-9
Fitting Adapter 2406-04-06
FDM6R17-6FJXZ-6FJX90MZ-6.5
Fitting Adapter JIC Swivel Run Tee TO-6602-04-04-04
Fitting Adapter 6506-4-4
Gauge Pressure 0-3000 PSI
FDM4R17-6FJXZ-4FJX90MZ-45
FDM4R17-6FJXZ-4FJX90MZ-61
Fitting Adapter 8ORB TO 4JIC
8300 Series Applicator 49
Qty.
12 Row
Add For
16 Row
Option
2
2
2
2
4
2
2
2
4
2
1
1
4
2
2
2
2
2
2
2
2
2
1
1
1
1
2
1
1
1
1
2
2
6
www.fastdist.com
8300 Applicator
Toolbox Carrier
2
1
4
3
5
6
Item
1
2
3
4
5
6
Fast Part #
18426
155
790041
239
223
152
Description
Toolbox Holder
Bolt Hex Head 1/2 X 2-1/2: Grade 5 Zp
Grab N Go Toolbox
Nut Hex Head 1/2" Centerlock Zp
Nut Hex Head 1/2" Jam Zp
Bolt Hex Head 1/2 X 1: Grade 5 Zp
www.fastdist.com
50
Quantity
1
1
1
1
1
1
8300 Series Applicator
8300 Applicator
Kit Contents
Item
Fast Part #
520003
520004
520005
520006
520014
520015
520034
530001
530014
530019
530024
530188
530201
530218
530236
530246
540001
540002
540003
540006
540013
540014
540032
590029
590030
590031
750008
750016
750018
750019
790041
AC40015
AC40151
AC52700
AP44103202
AP44103240
AXGC30020XXL
LAXNVGOGGLESL
BJ200SHIM
BJHM075
BJHM100
BJHM150
CLFBS1004
PL707TB
WA21047
VI3K9438
Description
3 Nozzle, Single Hose Shank Nyb 3
Nozzle, Double Hose Shank Nyb
Nozzle, Single Hs Conn 1/4" F
Nozzle, Double Hs Conn 1/4"F
Nozzle, SS 1/4" Tee
Nozzle, SS CA
Tip, SS - 0015 Teejet
1/4" X 1/4" Male Connector
1-1/2" EDPM Gasket
2" EDPM Gasket
3" EDPM Gasket
Hose Shank Assembly
Barb Hose 1/4" X 3/8"
3/8" X 3/8" Hose Mender W/ Stop
Nipple:1/4" MPTX6" MPT
Str. Elb:1/4" Mptx1/4" FPT
Clamp, 2" Std Worm Screw
Clamp, 2" Full Worm Screw
Clamp, 3" Worm Screw
Clamp 1-1/2" T-Bolt Hose 1.81"
Clamp, Stainless 3/4" #12
Clamp, Stainless 1" #16
Clamp, Hose 5/16"
Seal, EDPM Rubber
Cap Q.T. Ny.Lt.Yellow
Plate Orifice, Stainless Steel
Locking Collar, Std 30 Degrees
Rock Guard With Pin
3/8 X 1/2" Set Screw, Ss
Mounting Bracket F/Wiese CO-50 Knife
20" Deep Grab & Go Toolbox
O-Ring, Volute Seal
Seal, 5/8" Shaft, Viton-C
Repair Kit
1/4 X 1/4" Union Connector
1/4 X 1/4" Female Adaptor
XXL Green Gloves
Goggles
2" Shim
3/4" X 3/4" Hose Barb
1" X 1" Hose Barb
1-1/2" X 1-1/2" Hose Barb
5/8 X 1 Square Head Set Screw
Reduran
Cable Tie, 15" Heavy Duty
Barb:3/8" Hb For 8027 Nut-Poly
8300 Series Applicator 51
Injector
Knife
Quantity Quantity
2
2
2
2
1
1
2
1
2
2
2
1
4
2
1
1
1
1
1
2
10
3
1
2
2
2
1
1
1
2
5
4
4
2
1
2
1
1
3
1
1
1
2
2
1
2
1
20
3
3
3
2
1
1
1
1
3
1
1
1
2
2
2
1
1
20
3
www.fastdist.com
8300 Applicator
Lighting
4
3
7
5
6
1
2
Item
1
2
3
4
5
6
7
8
Vendor Part #
8
Fast Part #
104
235
249
590229
740023
740024
740025
740031
Description
Bolt, 1/4 x 2'' Grade 5 Zp
Nut, Centerlock, 1/4'' Zp
Washer, Lock, 5/16'' Zp
Bolt, 8 X 20 mm 8.8 Zp
Applicator Light Wiring Harness
Amber Warning Light
Red Tail Light
Light Module
www.fastdist.com
52
Qty.
1
1
4
4
1
2
2
1
8300 Series Applicator
8300 Applicator
Notes
8300 Series Applicator 53
www.fastdist.com
Fast Distributing Inc.
54859 County Road 44
Mountain Lake, MN 56159
1-800-772-9279 Toll Free
1-507-427-3861 Voice
1-507-427-3030 Fax
Part Number 992
8300 Applicator Parts Manual
10/24/2013