2.3 Select Internet Protocol (TCP/IP) and click Properties
D-LINK DSL-504 - Routed
Setup Instructions for Windows XP & 2000
Important: Please read the Quick Reference guide before proceeding
with these DSL-504 Setup Instructions.
Contents
1. Equipment Checklist
2. Network Configuration
3. Modem Configuration - Optional
1. Equipment Checklist
Before installing your modem, ensure you have the following:
D-link DSL504 Modem
Phone Cable
Ethernet Cable
Micro Filter
Installation CD
Please refer to the diagrams shown on the Quick Reference guide, in
order to connect the DSL504 Modem with your phone outlets and
connect the filter to your Telephone.
2. Network Configuration
Please connect your modem to the computer for configuration of your
ADSL Connection and turn power on.
2.4 Enter your Customer IP Address, Gateway IP Address and DNS
Servers IP Addresses which are provided in the Letter, delivered
with the modem:
Select Use the following IP Address
(a) IP Address:
192.168.0.2
Subnet mask:
255.255.255.0
Default Gateway:
192.168.0.1
(b) Select Use the following DNS Server addresses
Preferred DNS Server: 203.12.160.35
Alternate DNS Server: 203.12.160.36
Click OK to save settings and then click OK again
RS-232 console port used RS-232 console port used
for configuration
for configuration
Connect Power Adapter
ADSL port connect ADSL
cable
2.1 Select: Start -> Settings -> Network Connections
2.2 Right click on Local Area Connection and select Properties
Your Network Configuration has now been completed and you
may start using the TPG ADSL service.
Note: This next section is optional for re-configuring the Dlink DSL504
modem. The modem will already be preconfigured by TPG.
3. Modem Configuration – optional
Un-tick IP Unnumbered then enter the Customer IP Address,
Subnet mask and Gateway IP Address that is provided in the letter
with the modem.
3.1 Enter http://192.168.0.1 into the address bar on a web browser
page (eg. Internet Explorer, Netscape, etc). A login prompt will then
ask for a username and password. Enter the username as "admin"
and password as admin.
Click OK to save the settings and reboot the modem.
3.2 In Router/Bridge Configuration, select connection profile: 5
AU_IPoA, VPI=8, VCI=35, Routed with IPoA.
Your Network Configuration is completed and you can start
using the TPG Service.
Click OK to save the settings and reboot the modem.
3.3 Once the modem has finished rebooting, return back to the setup
screen Routed/Bridged Configuration
Support Information
For any installation, configuration or billing enquiries, please call:
1300 360 855
Or you can email your queries to helpdesk@tpg.com.au
Or visit www.tpg.com.au/helpdesk for further information.
The Help Desk service is available:
Monday to Friday
8:00am - Midnight
Weekends
9:00am - Midnight
Public holidays
10:00am - 4:00pm
For modem-related problems or suspected faulty modems please call:
D-Link Australia – 1800 177 100