POSTER PAPERS
1.
Requirements to technological maps of non-desructive examination. V.G.
Staseev, А.N. Bodrov (SSC RF JSC “CNIITMASH”, Moscow, Russia),
А.V. Polkovnikov, V.I. Gorbachev (JSC «NIKIMT-.Atomstroij, Moscow,
Russia).
2.
The Automated Hardware-Software Complexes of NDE of Large-Sized
Products. Ya.Yu. Samedov (OJSC SPA “CNIITMASH”, Moscow,
Russia).
3.
Transport-Packing Containers with Case from High-Strength Cast Iron
with Globe-Shaped Back Lead. A.V. Doub, V.V. Andreev,
N.N.Aleksandrov, Е.V.Коvalevich, F.А. Nuraliev (SSC RF JSC
“CNIITMASH”,
Moscow,
Russia),
A.V.
Romanov
(ZAO
“Petrazavodskmash, Petrozavodsk, Russia).
4.
Electrodes for Welding of High-Strength Steels. F.Yu. Zuev, Yu.D.
Darakhvelidze, Yu.V. Svanidze (SSC RF JSC “CNIITMASH”, Moscow,
Russia).
5.
Role of Structural and Chemical Heterogeneity at Formation of Quality
and Properties of Products for Nuclear and Conventional Energy. A.V.
Doub, S.I. Markov, V.S. Doub, E.V. Makarycheva, T.V. Morozova (SSC
RF JSC “CNIITMASH”, Moscow, Russia).
6.
About Possibility to Use the Import Welding Materials to Cladding the
Nuclear Power Equipment. S.А. Bocharov, N.А. Shulgan, Yu.А.
(Research Сenter OOO TK OMZ-Izhora, Saint-Petersburg, Russia).
7.
Inspection Procedure of Austenitic Repair Welds of Pipe-Lines Ду-800
MFCC-1000 of Units Nr.1 Smolensk NPP. А.N. Razygraev, N.P.
Razygraev, I.L. Kharina (SSC RF JSC “CNIITMASH”, Moscow, Russia),
A.I. Arzhaev (JSC Smolenskatomtekhenergo, Russia), Yu.Yu. Saburov
(UAB “Dekra Industrial”, Visaginas, Lithuania), P.Е. Nikishov (Smolensk
NPP, Desnogorsk, Russia).
8.
Comparison of Ultrasonic and Radiographic Control of Welded Joints of
Pipes Made of Pearlitic Steel with Thickness of 2-6 mm at Nuclear Power
Plants. V. Mikhalev, V. Ushakov (PJSC RPA«CNIITMASH»).
9.
The Plant
for Irradiated Materials Studying
Based
on the
“MEMBRANA-2” Diffractometer of PNPI. V.A. Suzdalev, V.M. Lebedev,
V.T. Lebedev (Petersburg Nuclear Physics Institute named
B.P.Konstantinov, Gatchina, Russia).
THE TWELFTH INTERNATIONAL CONFERENCES
"MATERIAL ISSUES IN DESIGN, MANUFACTURING AND
OPERATION OF NUCLEAR POWER PLANTS EQUIPMENT"
http://www.crism-prometey.ru/Conferences/Nuclear2012/
p. 1
10. Certainly-Element Parametric Modeling of Limit State of vertical
Drudgery Pipelines. А.V. Gaev, И.А.Данюшевский, О.B.Кireev (JSC
"CKTI”, St. Petersburg, Russia).
11. The Refinement of the Reactor EGP-6 Metal Construction Resource.
G.P. Karzov, V.V. Anikovsky, P.A. Kulazhenkov (FSUE CRISM
"Prometey", St. Petersburg, Russia) V.G. Fedosov, A.N. Krasnov (Izhora
Plant, St. Petersburg, Russia).
12. Comparative Assessment of Thermal Ageing of Cr-Ni austenite and
Ferrite weld metal after their tempering and without tempering for BN
RPV equipment. О.Yu. Zaitseva, О.Yu. Prokoshev, B.Z. Маrgolin, S.N.
Petrov, М.А. Аnanieva, Yu.М. Маrkova (FSUE CRISM “Prometey”, St.
Petersburg, Russia).
13. Peculiarities of the Corrosion Behavior for Corrosion Resistance
Stainless Steels and Alloys in high Water Parameters with Slow Strain
Rate Tests. R.А.Тupikov (JSC ОКB «Gidropress», Podolsk, Russia).
14. Monitoring of Condensate Tubes from Titanium Alloy in Simulating Water
and Steam Environments with Radionuclide. О.А. Коzhevnikov, К.А.
Nikishina, V.Yu. Larionov (FSUE CRISM “Prometey”, St. Petersburg,
Russia), V.А. Doilnizin, Yu.V. Murashkin (St.Petersburg Technological
University, Russia).
15. Assessment of Changing Microstructure and Properties for 09Cr18Ni9
and 08Cr16Ni11Мo3 during Prolonged Operation the Equipment with BN
Reactors. R.N. Grishmanovskaya, А.S.Кudryavtsev, К.А.Оkhapkin
(CRISM "Prometey") V.G. Fedosov, A.N. Krasnov (Izhora Plant, Kolpino,
Russia).
16. Long Durability and Plasticity Pseudo α-titanic alloys of Marks 5В and 37
for Nuclear Industry. V.I. Gorynin, D.A.Panotsky (FSUE “CRISM
Prometey”, St. Petersburg, Russia).
17. The analysis of an intense condition of the nozzle shell of WWER-1000
(1200) reactor at natural circulation of the heat-carrier. S.M. Bor, A.J.
Blagoveshchensky (StSPU, St. Petersburg, Russia).
18. Investigation of Probabilities Characteristics of Deformation and Failure
of RPV Steels. N.А. Makhutov, V.V. Zazarinnyj (IMASH RAS, Moscow,
Russia).
THE TWELFTH INTERNATIONAL CONFERENCES
"MATERIAL ISSUES IN DESIGN, MANUFACTURING AND
OPERATION OF NUCLEAR POWER PLANTS EQUIPMENT"
http://www.crism-prometey.ru/Conferences/Nuclear2012/
p. 2