EAGLE SIGNAL brand
Electric Timers
HQ9 Percentage Timer
Adjustable timing as a
percentage of overall
cycle... ideal for heat
control, machine
lubrication, etc.
®
®
RECOGNIZED
6
E
L
E
C
T
R
I
C
T
I
M
E
R
S
The HQ9 offers accurate, efficient control for many industrial
applications. These include motion control, electric heaters, ovens,
program temperature controls, chemical feeding, and lubrication
systems.
SPECIFICATIONS
Time Ranges:
Sym.
Time
Range
■ Cycle progress pointer
01
15 Sec.
■ Compatible with CYCL-FLEX® series featuring unique plug-in
02
30 Sec.
■ Electrically isolated pilot light
mounting
OPERATION
A synchronous motor driven cam closes a snap action switch for a
percentage of the total time cycle. Settings may be made or changed
with the timer operating. Relationship of switch transfer point at zero
and desired interval is made by adjustment of the setting pointer. As
the progress pointer passes zero, the load switch transfers. The HQ9
continues to operate as a repeat cycle timer as long as power is
supplied to the motor. ON time is adjustable from 5% to 100% of the
toal time range. Load connections are made to terminals 4 and 3.
CERTIFIED
03
60 Sec.
04
120 Sec.
06
5 Min.
07
10 Min.
08
15 Min.
09
30 Min.
10
60 Min.
11
120 Min.
14
20 Hr.
Voltage/Frequency: 120V (+10, -15%), 50/60 Hz
240V (+10, -15%), 50/60 Hz
Contact Rating: 10 amps at 120/240 VAC
1/3 HP at 125/250 VAC
1/2 amp at 125 VDC
1/4 amp at 250 VDC
Setability: ±1%
Timer Burden: 4 VA max.
Temperature Range: -10˚ to 140˚F (-23˚ to +60˚C)
Agency Approvals: UL Recognition E61735
CSA Certification LR26861
NOTE: Because of precise adjustment and calibration procedures, it is
recommended that all repair or part replacement be done at the factory.
6.18 DANAHER INDUSTRIAL CONTROLS
WIRING
Standard CW dial references the operation of the load when connected to terminal number 3. ON Time adjustable 5% to 100%.
6
A.C. LINE
5
7
B
2
1
M
8
4
LOAD
3
C
3
9
4
M
2
5
PL
10
1
11
MOUNTING
11
PL
12
A
12
DRILL AND TAP FOUR
HOLES FOR 8-32 SCREWS
(INCLUDED W/UNIT)
1.406
(35.71)
6
3.187 + .062
(80.95 + 1.57)
DIA. CUTOUT
3.062
(77.77)
1.406
(35.71)
1.406
(35.71)
MTG. HOLE
USED FOR
GROUNDING
CASE
1.406
(35.71)
4.125
(104.78)
1.625
(41.27)
5.750
(146.05)
ENCLOSURES
ACCESSORIES
Model No.
NEMA Class
HN308
HN364
HN370
1
1
1A
Description
Model No.
Surface Mtg. with terminal block
Surface Mtg. without terminal block
Dual unit cabinet less unit cases and
toggle switch, with 9 terminal block
H-5331
HP50-31
HP50-133
HQ900-71
Description
Mounting Brackets 2 req'd per timer
One Hole Mounting Ring
Surface Mounting Adapter to use in place of brackets
Dial Lock
ORDERING INFORMATION
Consult Customer Service for availability of other time ranges, voltages, and frequencies.
HQ9
06
A6
02
TIME RANGE
Sym.
Description
Sym.
Description
01
15 Sec.
08
15 Min.
30 Min.
02
30 Sec.
09
03
60 Sec.
10
60 Min.
04
120 Sec.
11
120 Min.
06
5 Min.
14*
20 Hr.
07
10 Min.
*Available in A6 version only
FEATURES
Sym.
VOLTAGE &
FREQUENCY
Sym.
Description
A5
120V, 50 Hz
A6
120V, 60 Hz
B5
240V, 50 Hz
B6
240V, 60 Hz
02
Description
Timer only modified for mounting in
NEMA VII explosion proof housing
07
Dial Lock
60 cycle units can be used for 50 cycle application;
however, the motor will run at 5/6 speed
DANAHER INDUSTRIAL CONTROLS 6.19
T
OE
TL
AE
LC
IT
R
ZI
IC
N
G
T
I
M
E
R
S