UNIVERSAL SIGNAL SOURCE
UZS – C5
 Calibrator of device for vibration measurement
 Exact source of the angular frequency
 Exact source of the charge and voltage
 Selectable signal types with exactly defined integral
values
Purpose
The universal signal source UZS type C5 serves for the testing, calibration and adjusting of
apparatuses and systems with piezoelectric vibration sensors. UZS is determined for the
production and service both of portable apparatuses and permanent installed equipment. UZS
can be also used in laboratories at the simulation of real signal sources and control of measuring
chains. The source has fluently adjustable output amplitude and switchable output frequency.
The possibility of output frequency adjusting is in accordance with requirements of ISO
standards. Digitally synthetized shaped of the output voltage process permits the extensive
selection of shaped of processes necessary for the control of special attributes of equipment –
e.g. attributes of applicated detectors (peak-to-peak value, RMS etc.). The UZS can be also
used like the source of noise, e.g. for the simulation of noises arising by the damage of roller
pads of bearings and permits to make both setting and control of apparatuses for bearings
diagnostics by this way.
This device is standardly delivered with the pre-set sine, rectangular symmetrical triangular
course and wide-band noise. Remain four signals courses aren´t utilized and can be equipped,
after the deal with producer, by customized shapes of signals.
The robust design of the device permits its using not only in the laboratory, but also in
industrial conditions. With this corresponds the possibility of the operation in the temperature
range from –25 to +85°C.
Description
The apparatus UZS is placed in the fixed metal box with dimensions 64 x 105 x 164 mm. On
the front panel is placed the control. The output level is setting by means of the central multispeed potentiometer placed in the centre of the front panel. Under this element are switches of
output frequency and of shape of output signal. Voltage output with the range 1V is brought out
to the connector BNC and simultaneously to the connector Microdot with the screw 10-32
UNF. The output of charge is brought out only to the connector Microdot, placed on the panel
bottom left. Over this connector is placed the switch of otuput charge range (1 and 10 pC).
CATALOGUE SHEET
KAT01C5an/01
AURA a.s. - 5.kvetna 118 ;399 01 Milevsko; Czech Republic; phone/fax +420 368 / 524 224
E-mail : sales@auranet.cz ; WEB: http://www.auranet.cz
UZS – C5
UNIVERSAL SIGNAL SOURCE
In the upper part of the panel is the switch and indicator of apparatus start. On the other side
is the indicator of accumulator´s discharge combined with the indicator of charging. The
source is power supplied from the built-in accumulator, which can be charged by the exterior
mains source, which is the part of the device delivery. The connector of charging is on the back
panel. The electronics is galvanically separated from the instrument box.
187
LO B A T .
AUR A C o .
C5
PO W E R
ON
CH ARG E G EN ER A TO R
PO W E R
LE V E L
105
[0 - 1 0 pC ]
[0 - 1 V ]
R A D IA L
FR EQ U EN C Y [ ra d /s ]
50 100 200
500
CH ARG E
20
O U T PU T
10
10 x
1x
W 1 W 2
W 3
W 4
1000
NO S
I E
159 .2
1 .5 9 2
3 .1 8 4
7 9 .5 8
3 1 .8 41 5 .9 2 7 .9 5 8
FR EQ U EN C Y H
[ z]
W AW E FO RM
VO LT AG E
O U T PU T
CH ARG E
O U T PU T
64
Basic technical data
Power supply
Output voltage
Max. voltage failure
Output frequency
Max. frequency failure
Shape of output signals
Dimensions
Mass
Temperatures range
Sealing
CATALOGUE SHEET
VO LT AG E
O U T PU T
164
built-in accumulator 12 V/1,5 Ah
charging source: 230 V, 50 Hz, 10 VA
0 to 1 V peak-to-peak
 0,2% of the range
10, 20, 50, 100, 200, 500 and 1000 rad/s
1,592; 3,184; 7,958; 15,92; 31,84; 79,58 and 159,2 Hz
 0,25%
sine, max. distortion  0,2%
symmetrical oblong
symmetrical triangular
W1 – disengaged
W2 – disengaged
W3 – disengaged
W4 – disengaged
noise
64 x 105 x 164 mm
1,4 kg
-25 to +85C
IP 44
KAT01C5an/01
AURA a.s. - 5.kvetna 118 ;399 01 Milevsko; Czech Republic; phone/fax +420 368 / 524 224
E-mail : sales@auranet.cz ; WEB: http://www.auranet.cz