JSS MAHAVIDYAPEETHA
SRI JAYACHAMARAJENDRA COLLEGE OF ENGINEERING
(AUTONOMOUS), MYSORE – 570 006
Under Visvesvaraya Technological University, Belgaum
Ref: JCE / Exa (Aut) / 171 / 2013–14
Date: 10.08.2013
CIRCULAR
I TO VIII SEM. B.E. SUPPLEMENTARY EXAMINATION
DRAFT TIME-TABLE - AUGUST 2013
======
The Draft Time Table for the students appearing for Supplementary
Examinations to be held during August 2013 has been prepared and put up
on the Website.
The students are hereby informed to go through the same carefully.
If there are any Clashes / Discrepancies in the Time Table, the same should
be brought up to the notice of the Controller of Examination (Autonomous)
in writing on or before 12th August 2013.
If we do no receive any representation from the candidates, the same
will be assumed as correct and final Time Table will be put up on the
Website on 13th August 2013.
PRINCIPAL
1
JSS MAHAVIDYAPEETHA
SRI JAYACHAMARAJENDRA COLLEGE OF ENGINEERING
(AUTONOMOUS), MYSORE – 570 006
Under Visvesvaraya Technological University, Belgaum
10.08.2013
DRAFT TIME-TABLE FOR I / II SEM. B.E. (AUTONOMOUS)
SUPPLEMENTARY SEMESTER EXAMINATIONS – AUGUST 2013
Date and
9.30 A.M. to 12.30 P.M.
Day
19.8.2013 MA110: Engineering Mathematics-I
Monday
20.8.2013 - MA210: Engineering Mathematics-II
(Multivariable Calculus)
Tuesday
EE110/210:
Basic Electrical and
21.8.2013 Electronics Engineering
Wednesday
22.8.2013 PH110/210: Engineering Physics
Thursday
23.8.2013 - CS110/210: Algorithmic Approach to
Problem Solving
Friday
24.8.2013 - CV110/220: Engineering Mechanics/
Elements of Civil Engineering and
Saturday
Engineering Mechanics
2.00 P.M. TO 5.00 P.M.
CH110/210: Engineering Chemistry
-EC110: Electronic Devices and
Circuits
-ME110/220: Mechanical Engineering
Sciences
CV210: Strength of Materials
NOTE:
The Date and Batch Timings for ME120/210: Computer Aided Engineering
Graphics (CAEG) will be fixed by the Dept. of Mechanical Engineering / I & P
PRINCIPAL
2
JSS MAHAVIDYAPEETHA
SRI JAYACHAMARAJENDRA COLLEGE OF ENGINEERING
(AUTONOMOUS), MYSORE – 570 006
Under Visvesvaraya Technological University, Belgaum
10.08.2013
DRAFT TIME-TABLE FOR III TO VIII SEM. B.E. (AUTONOMOUS)
SUPPLEMENTARY SEMESTER EXAMINATIONS – AUGUST 2013
COMPUTER SCIENCE & ENGINEERING
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
-CS710 – Object Oriented Systems
Development
CS340 – Computer Organization &
Architecture
CS420 – Analysis & Design of
Algorithms
CS763 – C# Programming & .Net
CS350 – Introduction to UNIX
CS450 – Introduction to
Microprocessors
MA310 – Engineering Maths-III
(Fourier Series & Int. Trans.)
2.00 PM To 5.00 PM
CS330/IT350/EC511 Data Structures with C
CS654 – Multimedia Computing
CS630 – Computer Networks-II
CS310/IS310
Digital System Design
CS550 – Software Engineering
CS610 – Compiler Design
CS540 – Computer Networks - I
CS440 – Object Oriented Programming
using C++
MA410 – Engineering Maths-IV
(Numerical Methods)
3
ELECTRONICS & COMMUNICATION
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
EC740– Optical Fibre Communication
EC310/EE310
Circuit Theory & Analysis
EC510 – Analog Communication
Systems
EC330/I330
Analog Electronic Circuits
EC520/IT630
Digital Signal Processing
EC340/EE330
Digital Electronic Circuits-I
EC350 – Engineering
Electromagnetics
EC620/EE530
Power Electronics
EC450 – Transmission Lines
EC540/EE540 – Control Systems
MA610 – Mathematics-VI
Computational Maths &
Graph Theory
MA310 – Engineering Maths-III
(Fourier Series & Int. Trans.)
2.00 PM To 5.00 PM
EC511/CS330/IT350
Data Structures using C++
EC712 – Image Processing Techniques
EC730 – VLSI Circuits & Systems
EC831 – Optical Networks
EC410/EE520
Linear Integrated Circuits & Systems
EC630 – Antennas & Propagation
EC420 – Switching Systems & Access
Networks
EC530 – Microcontrollers & Applications
EC610 – Advanced Microprocessors
EC430/EE430/IT510
Signals & Systems
EC560/EE640
Digital System Design with VHDL
EC640
Digital Communication
EC440 – Digital System Design
EC550 – Microwave Engineering
EC650/EC744 – Operating Systems
--
4
ELECTRICAL & ELECTRONICS ENGINEERING
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
EE310/EC310
Network Analysis
EE550/EC520/IT630
Digital Signal Processing
EE330/EC340
Logic Design
EE530/EC620 – Power Electronics
EE540/EC540/IT520
Control Systems
MA310 – Engineering Maths-III
(Fourier Series & Int. Trans.)
2.00 PM To 5.00 PM
-EE743 – Electrical Installation Design
EE520/EC410
OPAMPS & Linear IC’S
EE650 – Modern Control Theory
EE710 – Power System Analysis and
Stability-II
EE430/EC430/IT510
Signals & Systems
EE640/EC560
Digital System Design using VHDL
EE720 – Electrical & Electronics
Engineering Materials
--
INSTRUMENTATION TECHNOLOGY
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
2.00 PM To 5.00 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
IT310 – Electrical & Electronics
Measurements
IT330/EC330
Analog Electronics
IT630/EC520/EE550
Digital Signal Processing
IT823 – Lasers & Optical
Instrumentation
IT520/EE540/EC540
Advanced Control Systems
MA310 – Engineering Maths-III
(Fourier Series & Int. Trans.)
IT350/CS330
C++ and Data Structures
IT640 – Aircraft Instrumentation
IT831 – Medical Imaging
IT661 – Automobile Instrumentation
IT710 – Automation in Process Control
IT510/EC430/EE430
Signals & Systems
IT730 – DSP Architecture
MA410 – Engineering Maths-IV
(Probability & Statistics)
5
INFORMATION SCIENCE & ENGINEERING
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
2.00 PM To 5.00 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
IS654 – Multimedia Computing
IS310 – Logic Design
IS350 – Principles of Programming
Languages
MA310 – Engineering Maths-III
(Fourier Series & Int. Trans.)
IS610 – Computer Networks-II
IS310/CS310 – Logic Design
IS653 – Computer Graphics
IS550 – UNIX System Programming
-MA410 – Engineering Maths-IV
(Probability and Statistics)
CIVIL ENGINEERING
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
CV420/CT420
Analysis of Indeterminate Structures
CV510 – Water Supply and Sanitary
Engineering
CV450 – Elements of Engineering
Geology & Geotechnical Engg.
--
2.00 PM To 5.00 PM
HU510/HU610
Management & Entrepreneurship
CV520/CT520
Design of RC Structures
CV550/CT550
Geotechnical Engineering
CV610/CT620
Design of Steel Structures
CV710 – Advanced Design of Steel
Structures
MA410 – Engineering Maths-IV
(Fourier Series Intgd. Trans. & Appls.)
6
CONSTRUCTION TECHNOLOGY & MANAGEMENT
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
CT420/CV420 – Analysis of
Indeterminate Structures
CT430 – Higher Surveying
CT610 – Construction Quality
Management
CT640 – Applied Geotechnical
Engineering
MA310 – Engineering Maths-III
(Numerical Methods)
2.00 PM To 5.00 PM
HU610/HU510
Management & Entreprenurship
CT320
Analysis of Determinate Structures
CT520/CV520
Design of RC Structures
CT550/CV550
Geotechnical Engineering
CT620/CV610
Design of Steel Structures
CT651 – Special Concretes
CT720 – Design of Pre-Stressed
Concrete Structures
MA410 – Engineering Maths-IV
(Fourier Series Intgd. Trans. Stat & Prob.)
ENVIRONMENTAL ENGINEERING
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
EV440 – Environmental Fluid
Mechanics-II
EV530 – Geology & Geotechnical
Engineering
EV630–Wastewater Engineering-I
EV540 – Water Resources
Engineering
EV550 – Water Supply
Engineering
MA310 – Engineering Maths-III
(Numerical Methods)
2.00 PM To 5.00 PM
--EV560 – Disaster Management
-EV650 – Environmental Systems
Optimization
-MA410 – Engineering Maths-IV
(Fourier Ser. Intgd. Trans. Appls)
7
INDUSTRIAL & PRODUCTION ENGINEERING
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
2.00 PM To 5.00 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
IP420/ME410
Dynamics of Machinery
----
--
--
--
--
IP520/ME450– Machine Design-I
--
MA310 – Engineering Maths – III
(Numerical Methods)
MA410 – Engineering Maths-IV
(Fourier Ser, & Intg. Trans. &
Appls)
MECHANICAL ENGINEERING
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
2.00 PM To 5.00 PM
MATDIP310
ME330/IP320
Mathematics for Diploma Holders
Kinematics of Machinery
MATDIP410
ME350 – Computer Aided Machine
Mathematics for Diploma Holders
Drawing
ME410/IP420
ME510 – Applied Thermodynamics
Dynamics of Machinery
ME420 – Manufacturing
ME530 – Fluid Machinery
Process-II
ME430 – Metrology &
ME550 – Design of Machine
Measurement
Elements-II
ME450/IP520 – Design of
ME630 – Mechanical Vibration
Machine Elements-I
MA310 – Engineering Maths – III
MA410 – Engineering Maths-IV
(Numerical Methods)
(Fourier Ser, & Intg. Trans. &
Appls)
8
POLYMER SCIENCE & TECHNOLOGY
Date and Day
19.8.2013 Monday
20.8.2013 –
Tuesday
21.8.2013 –
Wednesday
22.8.2013 –
Thursday
23.8.2013 –
Friday
24.8.2013 –
Saturday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
2.00 PM To 5.00 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
PS430A – Polymer Physics
----
PS520 – Testing of Polymers
PS610A – Testing of Polymers
--
PS810 – Tyre Technology
--
PS821 – Total Quality
Management (TQM)
--
MA310 – Engineering Maths – III
(Numerical Methods)
MA410 – Engineering Maths-IV
(Fourier Ser, & Intg. Trans. &
Appls)
BIO – TECHNOLOGY
Date and Day
19.8.2013 Monday
20.8.2013 Tuesday
25.8.2013 –
Sunday
9.30 AM To 12.30 PM
MATDIP310
Mathematics for Diploma Holders
MATDIP410
Mathematics for Diploma Holders
MA310 – Engineering Maths – III
(Numerical Methods)
2.00 PM To 5.00 PM
----
PRINCIPAL
9