1 Type KRÜLLUNG HORISO AL-60/70/90-Z venetian blind with bordered, 'Z' shaped slats The extruded aluminium ’U’ shaped top rail is open at the bottom to protect the mechanism from dirt and wet. The installation brackets are made of galvanized steel. The cross-shaft is made of aluminium-tube (d=17 mm), with hexagonal groove, with optional slide coupling made of stainless steel on each side. With high-precision, dustproof plastic friction-bearing. The lifting-and tilting mechanism is a closed, weatherproof construction element made of special, durable plastic, without guide rollers. When lowering the blind, the slats are closed towards the extreior – when raising, the slats are in a horizontal position. When lowered, due to the welting of the slats the blind shuts completely. The slats can be tilted in any position of the blind. 8 mm wide lift tape, tear proof at 110 daN. The ladder cord is made of high-strength Trevira-terylene, with sprayed bevel cams made from UV-resistant plastic, connection to the slat via chromium steel hook. 90 mm wide, 0,4-0,5 mm thick 'Z' shaped, roll-formed, bordered aluminium slats made from highly elastic special alloy, 2-layer stove enamelled in standard color / RAL-color at the buyers option (surcharge). For better blacking out and smoother run, a sealing strip is rolled in the front border of each slat. The bottom rail is made of extruded, closed aluminium profile, curved at the top , flush closed in line with the edge of the slats with plastic end caps. Guide-rails: With guide rails made of extruded aluminium (22*22mm /22(37)*27 mm) powder coated in standard colour. With noise suppressing inserts. With zinc-alloy stud on every other end of each slat, which runs in the guide rails. / Guide-wires: The slats are guided through polyamide-sheated stainless steel wire (d=2,5 mm), mounted with stainless steel tensioning device (with spring), fixed to the top rail, and stainless steel fitting on its lower end, fixed to the extruded aluminium tensioning brackets. Mounting brackets made of extruded aluminium. Motor drive: The blind operates via a 230 V/AC electric motor, mounted into the top rail. The drive system has limit stops at the top and at the bottom, and an integrated thermo-protection switch to prevent overloading the motor. One motor per switch (no group control), without switches and central control unit / for central control unit (control system) see Pos…/ Crank handle drive: Powder coated, aluminium crank rod, with plastic folding handle and crank holder. Stainless steel fastening fixtures. The ’U’ or ’L’ shaped top covers are made of 1,5 / 2mm thick folded aluminium, powder coated (standard RAL) / Top cover excluded. 2 Type KRÜLLUNG HORISO AL-60/70/90-Z-WS venetian blind with bordered, 'Z' shaped slats (wind-resistant construction) The extruded aluminium ’U’ shaped top rail is open at the bottom to protect the mechanism from dirt and wet. The installation brackets are made of galvanized steel. The cross-shaft is made of aluminium-tube (d=17 mm), with hexagonal groove, with optional slide coupling made of stainless steel on each side. With high-precision, dustproof plastic friction-bearing. The lifting-and tilting mechanism is a closed, weatherproof construction element made of special, durable plastic, without guide rollers. When lowering the blind, the slats are closed towards the extreior – when raising, the slats are in a horizontal position. When lowered, due to the welting of the slats the blind shuts completely. The slats can be tilted in any position of the blind. 8 mm wide lift tape, tear proof at 110 daN. The ladder cord is made of high-strength Trevira-terylene, with sprayed bevel cams made from UV-resistant plastic, connection to the slat via chromium steel hook. 90 mm wide, 0,4-0,5 mm thick 'Z' shaped, roll-formed, bordered aluminium slats made from highly elastic special alloy, 2-layer stove enamelled in standard color / RAL-color at the buyers option (surcharge). For better blacking out and smoother run, a sealing strip is rolled in the front border of each slat. The bottom rail is made of extruded, closed aluminium profile, curved at the top , flush closed in line with the edge of the slats with plastic end caps. The guide rails are made of extruded aluminium (30(37) * 32 mm) powder coated in standard colour. With noise suppressing inserts. With zinc-alloy stud on every other end of each slat, which runs in the guide rails. For better wind resistance, guide-wires are included. The polyamide-sheated stainless steel wires (d=2,5 mm) are placed on the outside, the distance from the outer edge of the slat up to the wire tensioning is 50 mm. Additional cable guidings are available, depending on the unit width. mounted with stainless steel tensioning device (with spring), fixed to the top rail, and stainless steel fitting on its lower end, fixed to the extruded aluminium tensioning brackets. Mounting brackets made of extruded aluminium. Motor drive: The blind operates via a 230 V/AC electric motor, mounted into the top rail. The drive system has limit stops at the top and at the bottom, and an integrated thermo-protection switch to prevent overloading the motor. One motor per switch (no group control), without switches and central control unit / for central control unit (control system) see Pos…/ Crank handle drive: Powder coated, aluminium crank rod, with plastic folding handle and crank holder. Stainless steel fastening fixtures. The ’U’ or ’L’ shaped top covers are made of 1,5 / 2mm thick folded aluminium, powder coated (standard RAL) / Top cover excluded.