Design and Construction of the PRI - 1 Works PRI-1 Contract Exhibit A Scope of Works and Technical Criteria Appendix 15 - Reference Documents Date: Author: Revision: Status: November 2009 Sydney Metro 1.2 ITT (Addendum) Version Confidential PRI-1 Works Reference Documents Appendix 15 Reference Documents Contents Page Number 15. Reference Documents ......................................................................................................................... 1 15.1 15.2 15.3 15.4 Order of Precedence of Reference Documents Standards Australia Codes, Standards and Specifications International Codes, Standards, Specifications and Guidelines Other Codes, Standards, Specifications and Guidelines Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 1 1 4 6 Page i PRI-1 Works 15. Reference Documents Reference Documents This Appendix 15 identifies the Standards Australia codes, standards and specifications, international codes, standards, specifications and guidelines and other codes, standards, specifications and guidelines that form the Reference Documents. 15.1 Order of Precedence of Reference Documents In the event of any inconsistency, ambiguity or discrepancy between any Reference Documents then the Reference Document which specifies the greatest level of service or gives the highest standard is to apply. 15.2 Standards Australia Codes, Standards and Specifications Reference Doc No. Document Title 1. AS 1012 Methods of testing concrete 2. AS 1101 Graphic symbols for general engineering 3. AS 1111 ISO Metric hexagon bolts and screws 4. AS 1141 Methods for sampling and testing aggregates 5. AS 1163-1991 Structural steel hollow sections 6. AS/NZS 1170 Set: 2007 Structural design action Set 7. AS 1214-1983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) 8. AS/NZS 1252:1996 High strength steel bolts with associated nuts and washers for structural engineering 9. AS 1289 Methods of testing soils for engineering purposes 10. AS 1319-1994 Safety signs for the occupational environment 11. AS 1345-1995 Identification of the contents of pipes, conduits and ducts 12. AS 1379-2007 Specification and supply of concrete 13. AS 1420:2008 ISO Metric hexagon socket head cap screws 14. AS/NZS 1421:1996 ISO metric hexagon socket set screws 15. AS 1478 Chemical admixtures for concrete, mortar and grout 16. AS 1530.4-2005 Methods for fire tests on building materials, components and structures - Fire-resistance tests of elements of building construction 17. AS/NZS 1554:2008 Structural steel welding 18. AS/NZS 1594:2002 Hot-rolled steel flat products 19. AS 1657:1992 Fixed platforms, walkways, stairways and Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 Page 1 PRI-1 Works Reference Documents ladders - Design, construction and installation 20. AS 1657:1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation 21. AS/NZS 1664 Aluminium structures 22. AS/NZS 1665:2004 Welding of aluminium structures 23. AS 1725:2003 Chain-link fabric security fencing and gates 24. AS 1726:1993 Geotechnical site investigations 25. AS 1742.3:2009 Manual of uniform traffic control devices Traffic control for works on roads 26. AS/NZS 1891 Industrial fall-arrest systems and devices 27. AS 1939:1990 Supp 1 Degrees of protection provided by enclosures for electrical equipment (IP Code) – Wallchart 1 28. AS 1939:1990 Supp 2 Degrees of protection provided by enclosures for electrical equipment (IP Code) – Wallchart 2 29. AS 2074:2003 Cast steels 30. AS 2159:1995 Piling - Design and installation 31. AS 2207:2007 Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel 32. AS 2214:2004 Certification of welding supervisors – Structural steel welding 33. AS/NZS 2271:2004 Plywood and blockboard for exterior use 34. AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings 35. AS/NZS 2350 Methods for testing portland and blended cements 36. AS 2423:2002 Coated steel wire fencing products for terrestrial, aquatic and general use 37. AS 2601-2001 Demolition of structures 38. AS 2758.1:1998 Aggregates and rock for engineering purposes – Concrete aggregates 39. AS 2832 Cathodic protection of metals 40. AS/NZS 2904:1995 Damp-proof courses and flashings 41. AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) 42. AS/NZS 3500 Plumbing and drainage 43. AS 3582 Supplementary cementitious materials for use with portland and blended cement 44. AS 3583 Methods of test for supplementary cementitious materials for use with portland and blended cement 45. AS 3600:2001 Concrete structures Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 Page 2 PRI-1 Works Reference Documents 46. AS 3600-2001/Amdt 1-2002 Concrete structures 47. AS 3600-2001/Amdt 2-2004 Concrete structures 48. AS 3610:1995 Formwork for concrete 49. AS/NZS 3678:1999 Structural steel – hot rolled plates, floor plates and slabs 50. AS/NZS 3679 Structural steel 51. AS 3706 Geotextiles – Methods of test 52. AS/NZS 3725 Design for installation of buried concrete pipes 53. AS 3750.1:2008 Paints for steel structures – Epoxy mastic (two pack) – For rusted steel 54. AS/NZS 3750.2:2008 Paints for steel structures – Ultra high-build paint 55. AS/NZS 3750.12:1996 Paints for steel structures – Alkyd/micaceous iron oxide 56. AS/NZS 3750.14:1997 Paints for steel structures – highbuild epoxy (two-pack) 57. AS 3798:2007 Guidelines on earthworks for commercial and residential developments 58. AS 3799:1998 Liquid membrane–forming curing compounds for concrete 59. AS/NZS 3808:2000 Insulating and sheathing materials for electric cables 60. AS 3972:1997 Portland and blended cements 61. AS 3996:2006 Access covers and grates 62. AS 4072.1-2005 Components for the protection of openings in fire-resistant separating elements - Service penetrations and control joints 63. AS 4100:1998 Steel structures 64. AS 4133 Methods of testing rocks for engineering purposes 65. AS/NZS 4360:2004 Risk Management 66. AS/NZS 4383 Preparation of documents in electrotechnology 67. AS/NZS 4389:1996 Safety mesh 68. AS/NZS 4602:1999 High visibility safety garments 69. AS 4654.2:2009 Waterproofing membrane systems for exterior use – Above ground level. Part 2: Design and installation 70. AS/NZS 4671:2001 Steel reinforcing materials 71. AS/NZS 4672 Steel prestressing materials 72. AS 4678:2002 Earth-retaining structures 73. AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 Page 3 PRI-1 Works 15.3 Reference Documents 74. AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process 75. AS/NZS 4801:2001 Occupational Health and safety management systems - Specification with guidance for use 76. AS/NZS 4804:2001 Occupational health and safety management systems – General guidelines on principles, systems and supporting techniques 77. AS/NZS 4856:2006 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification 78. AS/NZS 4857:2006 Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification 79. AS 5100 Set-2007 Bridge Design Set 80. AS/NZS 60598 Luminaires 81. AS/NZS ISO 9000:2006 Quality management systems – Fundamentals and vocabulary 82. AS/NZS ISO 9001:2008 Quality management systems – Requirements 83. AS/NZS ISO 9004:2000 Quality management systems Guidelines for performance improvements 84. AS/NZS ISO 14000:2005 Environmental Management Standards 85. AS/NZS ISO 14001:2004 Environmental Management Systems - Requirements with guidance for use 86. AS ISO 15489.1-2002 Records management - General 87. AS ISO 15489.2-2002 Records management - Guidelines International Codes, Standards, Specifications and Guidelines Reference Doc No. Document Title 88. ASTM C151 Standard Test Method for Autoclave Expansion of Hydraulic Cement 89. ASTM C295 Standard Guide for Petrographic Examination of Aggregates for Concrete 90. ASTM C1202 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration 91. BS 6164:2001 Code of practice for safety in tunnelling in the construction industry 92. BS 8002:1994 Code of practice for earth retaining structures 93. BS 8006:1995 Code of practice for Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 Page 4 PRI-1 Works Reference Documents strengthened/reinforced soils and other fills 94. BS 8110-1:1997 Structural use of concrete – Code of Practice for design and construction 95. BS 8110-2:1985 Structural use of concrete – Code of Practice for special circumstances 96. BS 8204-2:2003 Screeds, bases and in situ floorings. Concrete wearing surfaces. Code of practice 97. BS EN 1992, Eurocode 2: Design of concrete structures 98. I.S. EN 10248-1:1996 Hot Rolled Sheet Piling Of Non Alloy Steels - Part 1: Technical Delivery Conditions 99. I.S. EN 10248-2:1996 Hot Rolled Sheet Piling Of Non Alloy Steels - Part 2: Tolerances On Shape And Dimensions 100. ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings 101. ISO 8503 Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates 102. ISO 8504 Preparation of steel substrates before application of paints and related products– Surface Preparation Methods 103. ISO 11124 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives 104. ISO 11125 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives 105. ISO 11126 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives 106. ISO 14040:2006 Environmental Management - Life cycle assessment - Principles and framework 107. ISO/IEC 31010: 2009 Risk management - Risk Management techniques 108. British Tunnelling Society and Institution of Civil Engineers - Closed-Face Tunnelling Machines and Ground Stability 109. British Tunnelling Society and Institution of Civil Engineers - Occupational Exposure to Nitrogen Monoxide in a Tunnel Environment 110. British Tunnelling Society and Institution of Civil Engineers - Specification for Tunnelling 2nd Edition 111. British Tunnelling Society and Institution of Civil Engineers - The Management of Hand-Arm Vibration in Tunnelling 112. British Tunnelling Society and Institution of Civil Engineers - Tunnel Lining Design Guide Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 Page 5 PRI-1 Works 15.4 Reference Documents 113. British Tunnelling Society and Institution of Civil Engineers - Tunnelling and Pipejacking: Guidance for Designers 114. IEEE 81, 1983 Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System Part 1: Normal Measurements Other Codes, Standards, Specifications and Guidelines Reference Doc No. Document Title 115. Australian earthing guideline, Energy Networks Association (AUS) EG1-2006, Substation Earthing Guide 116. NT Build 443 Concrete, Hardened: Accelerated Chloride Penetration 117. Designers Handbook No 9002 – Welding of Stainless Steels and Other Joining Materials – Nickel Development Institute 118. National Standard for Plant NOHSC 1010 (1994) - National Occupational Health and Safety Commission 119. National Standard for Construction Work NOHSC:1016 (2005) - National Occupational Health and Safety Commission 120. Building Code of Australia 121. CIA Z48-2002 Precast Concrete Handbook 122. HB 79-1996 Alkali Aggregate reaction - Guidelines on Minimising the Risk of Damage to Concrete Structures in Australia 123. HB 243-2007 Communications Cabling Manual - Module 1: Australian regulatory arrangements 124. Acid Sulphate Soil and Rock - EPA Information Bulletin Publication 655 125. Acid Sulphate Soils - Concrete Structures Advice for Design and Construction - RTA 126. Acid Sulphate Soil Manual - NSW Acid Sulphate Soils Management Advisory Committee 127. Australian Paint Approval Scheme (APAS) Specification 2975 – Epoxy ultra high build two-pack coating for the long term protection of steel 128. Code of Practice for Water Management – Road Development and Management – RTA 129. Concrete Pavement Manual Design and Construction RTA 130. Environmental Noise Management Manual – RTA 131. Guidelines for the Management of Acid Sulphate Materials: Acid Sulphate Soils, Acid Sulphate Rock and Monosulfidic Black Ooze – RTA Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 Page 6 PRI-1 Works Reference Documents 132. RTA QA Specification DCM 3211 Portland and Blended Cements 133. RTA Guideline on Traffic Management Plans 134. Shotcrete Design Guidelines - Design guidelines to avoid, minimise and improve the appearance of shotcrete – RTA 135. Traffic Control at Worksites (Version 3.1) – RTA 136. Managing Land Contamination: Planning Guidelines SEPP 55 – Remediation of Land – Dept of Urban Affairs and Planning NSW EPA 137. Austroads Guide to Traffic Engineering Practice 138. Australian Rainfall and Runoff, Engineers Australia 139. Australian Runoff Quality - A guide to water sensitive urban design, Engineers Australia 140. Soils and Construction - Managing urban stormwater volume 1, Landcom 141. Soils and Construction - Managing urban stormwater volume 2 (Consultation Draft), NSW Department of Environment and Climate Change (DECC) 142. Practical Consideration of Climate Change: Floodplain Risk Management Guideline, NSW Department of Environment and Climate Change (DECC) 143. Draft Sea Level Rise Policy Statement, NSW Department of Environment and Climate Change (DECC) 144. Climate change in Australia: technical report 2007 CSIRO and the Bureau of Meteorology 145. Assessing and Managing Acid Sulphate Soils - EPA 146. Acid Sulphate Soils Manual – DUAP (the former NSW Department of Urban Affairs and Planning 147. RTA Traffic Control at Worksites Manual 148. Austroads Guide to Traffic Management 149. RTA Road Design Guide 150. RTA QA Specification DCM R11 Stormwater Drainage 151. RTA QA Specification DCM R44 Earthworks 152. RTA QA Specification DCM R71 Unbound Pavement Course (Normal Duty) 153. RTA QA Specification DCM R73 Heavily Bound Pavement Course (Plant Mixing Using SlowSetting Binders) 154. RTA QA Specification R106 Sprayed Bituminous Surfacing (With Cutback Bitumen) 155. RTA QA Specification R107 Sprayed Bituminous Surfacing (With Polymer Modified Binder) 156. RTA QA Specification R111 Sprayed Bituminous Surfacing (With Bitumen Emulsion) 157. RTA QA Specification DCM R116 Asphalt (Dense Graded and Open Graded) Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 Page 7 PRI-1 Works Reference Documents 158. RTA QA Specification DCM R141 Pavement Marking 159. RTA QA Specification DCM 132 Safety Barrier Systems Confidential Scope of Works and Technical Criteria Appendix 15 Revision 1.2 Page 8