Refereed Journal Publications
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
Invited Publication, J.G. Hoekstra, G.J. Shiflet, J. Poon, J.R. Scully, and
J.M. Fitz-Gerald, “Development of Amorphous Layered Structures by
Laser Irradiation for Enhanced Corrosion Resistance”, J. of Advanced
Engineering Materials, (accepted, in-press, 2005)
J. D. Fowlkes, P. D. Rack, J. M. Fitz-Gerald, “ Ultraviolet emitting (Y1xGdx)2O3-x thin films deposited by rf magnetron sputtering Part One:
Combinatorial modeling, synthesis, and rapid characterization”, Thin Solid
Films, (accepted, in-press, 2005)
T. M. Adams, A.J. Duncan, and J. Fitz-Gerald, “Characterization of
Environmental Stability of Pulsed Laser Deposited Oxide Ceramic
Coatings”, Electronic Materials 34(5), 551-558 (2005).
A. Mercado, C.E. Allmond, J. Hoekstra, J.M. Fitz-Gerald “Pulsed Laser
Deposition vs. Matrix Assisted Pulsed Laser Evaporation for Growth of
Biodegradable Polymer Thin Films”, Appl. Phys. A 81, 591-599, (2005).
D. S. Lee, A. J. Steckl, P.D. Rack, J.M. Fitz-Gerald,
“Cathodoluminescence and its Temperature Dependence in Tm-doped
AlxGa1-xN Thin Films”, Phys. Stat. Sol. C 2 No. 7, 2767 (2005)
J.M. Fitz-Gerald, G. Jennings, R. Johnson, C. Fraser, “Pulsed laser
deposition of light emitting polymer thin films”, Appl. Phys. A, (Appl. Phys.
A 80, 1109-1113, (2005).
Y. Deng, J. D. Fowlkes, J.M. Fitz-Gerald, P.D. Rack, “Combinatorial Thin
Film Synthesis of Gd-doped Y3Al5O12 Ultraviolet Emitting Materials”, Appl.
Phys. A 80,787-789 (2005).
J. M. Fitz-Gerald, J. Hoekstra, J.D.Fowlkes, and P.D. Rack, “PulsedLaser-Deposited Ultraviolet-Emitting SrS:Te Thin Films”, Appl. Phys. Lett.,
82 N19, 3466-3468 (2003).
F. Kelly, R. Chodelka, R.K. Singh, S.J. Pearton, and J.M. Fitz-Gerald,
“GaN Films Annealed Under High Pressure”, Solid State Electronics, 47,
pp. 1081 (2003).
D. M. Bubb, R. A. McGill, J. S. Horwitz, J. M. Fitz-Gerald, E. J. Houser, P.
K. Wu, B. R. Ringeisen, A. Piqué, R. Stroud and D. B. Chrisey, LaserBased Processing of Polymer Nanocomposites for Chemical Sensing
Applications, J. of Appl. Phys. 89, 5739-5746 (2001).
D. Young, H.D. Wu, R.C.Y. Auyeung, R. Modi, J. Fitz-Gerald, A. Piqué, P.
Atanassova, T. Kodas, and D.B. Chrisey, “Dielectric Properties of Oxide
Structures by a Laser-Based Direct-Writing Method”, J. of Mat. Res., 16,
1720-1725 (2001).
J.D. Talton, J.M. Fitz-Gerald, R.K. Singh, G. Hochhaus, “Nano-Thin
Coatings for Improved Lung Targeting of Inhaled Glucocorticoid Dry
Powders: In-Vitro and In-Vivo Characteristics”, Respiratory Drug Delivery
VII, pp. 67-74, (2000).
A. Piqué, D. Chrisey, J. Fitz-Gerald, R.A. McGill, R. Auyeung, S. Lakeou,
V. Nguyen, R. Chung, M.Duignan, “Direct Writing of Electronic and Sensor
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
Materials Using a Laser Transfer Technique”, J. of Mat. Res., 15, 18721875 (2000).
D.B. Chrisey, A. Piqué, J. Fitz-Gerald, B. Ringeisen and R. Mohdi; Laser
Direct Writing Builds Biostructures; Laser Focus World 36, pp. 113 (2000).
J.M. Fitz-Gerald, H.D. Wu, A. Piqué, J.S. Horwitz, R.C.Y. Auyeung, W.
Chang, W.J. Kim, D.B. Chrisey, Maple Direct Write: A New Approach to
Fabricate Ferroelectric Thin Film Devices in Air at Room Temperature”, J.
of Integrated Ferroelectronics, 28 (1-4), p. 13-28 (2000).
J.M. Fitz-Gerald, D.B. Chrisey, A. Piqué, P.D. Rack, “Novel Synthesis of
High-Definition Flat Panel Display Technologies”, Appl. Phys. Lett., 76,
1386 (2000).
Chrisey, D B; Piqué, A; Fitz-Gerald, J; Auyeung, R C Y; Mcgill, R A; Wu, H
D; Duignan, “New Approach to Laser Direct Writing Active and Passive
Mesoscopic Circuit Elements”, App. Surf. Sci., 154, p. 593, (2000).
T. Trottier, V. Krishnamoorthy, B. Abrams, J. Fitz-Gerald, R. Singh, X.
Zhang, R. Petersen, P. Holloway, “On the Cathodoluminescent
Degradation of Y202S:Eu3+”, J. of the Society for Information Display
Supplement-1, pp. 217-222, (2000).
J.M. Fitz-Gerald, R.K. Singh, H. Gao, S.J. Pennycook, “Nanometric dry
powder coatings using a novel process”, KONA, J. Powder Science and
Technology 17, 173-182 (1999).
D.B. Chrisey, A. Piqué, R.C.Y. Auyeung, R.A. McGill, R. Chung, S.
Lakeou, P. Wu, J. Fitz-Gerald, H.D. Wu, and M. Duignan, Surface
Engineering: Science and Technology I, Edited by A. Kumar, Y.-W.
Chung, J.J. Moore, and J.E. Smugeresky, The Minerals, Metals, &
Materials Society, pp. 143-154 (1999).
Piqué, A; Chrisey, D B; Auyeung, R C Y; Fitz-Gerald, J; Wu, H D; Mcgill, R
A; Lakeou, S; Wu, P K; Nguyen, V; Duignan, “A Novel Laser Transfer
Process for Direct Writing of Electronic and Sensor Materials, Applied
Physics. A, Materials Science & Processing, 69, p. S279-284 (1999).
J. Fitz-Gerald, S. Pennycook, H. Gao, R.K. Singh, “Synthesis and
Properties of Nanofunctionalized Particulate Materials”, J. of
Nanostructured Materials, 12 (5-8) p.1167-1171 (1999).
Fitz-Gerald, J M; Singh, R K; Gao, H; Wright, D; Ollinger, M; Marcinka, J
W; Pennycook, S ., “Novel Method for the Synthesis of Thin Film Coatings
on Particulate Materials, J. of Mat. Res., 14, pp. 3281, (1999).
J. M. Fitz-Gerald, P.D. Rack, T.A. Trottier, M. Ollinger, P. D. Rack, S. J.
Pennycook, H. Gao, R. K. Singh, “Synthesis of Spherical Luminescent
Particulate Coatings”, J. of Appl. Phys. Communications, 86, 1759-1761,
(1999).
J. M. Fitz-Gerald, T. Trottier, R. K. Singh, P. H. Holloway, “Significant
Reduction of Cathodoluminescent Degradation in Sulfide Based
Phosphors”, Appl. Phys. Lett., 72, 1838-1839 (1998).
J. M. Fitz-Gerald, D. Kumar, R. K. Singh, “Synthesis of High Temperature Superconductive and Colossal Magnetoresistive Surfaces on
Insulating Particles”, Appl. Phys. Lett., 72, 1451-1453 (1998).
27)
28)
29)
30)
31)
32)
33)
34)
H. Gao, Y. Yan, J. M. Fitz-Gerald, D. Kumar, R. K. Singh, S. J. Pennycook,
“Z-Contrast Scanning Transmission Electron Microscopy of Nanometer Scale Coated Materials”, Microscopy and Micro Analysis, 4, 756, (1998).
D. G. Lee, J. M. Fitz-Gerald, R. K. Singh, “Novel Method for Adherent
Diamond Coatings on Cemented Carbide Substrates”, Surf. Coat.
Technol., 100-101, 187-191 (1998).
R. K. Singh, A. Ata, J. M. Fitz-Gerald, Y. Rabinovich, W. Hendrickson,
“Dry Coating Method Using Magnetically Assisted Impaction in a
Randomly Fluidized Bed”, KONA, J. Powder Science and Technology, 15,
121-131 (1997).
R.K. Singh, J. M. Fitz-Gerald, “Surface Composites: A New Class of
Engineered Materials”, Journal of Materials Research, 12, 769-773 (1997).
R. K. Singh, D. R. Gilbert, J. M. Fitz-Gerald, D. G. Lee, “Surface
Composites: A Novel Method to Fabricate Adherent Interfaces”, Journal of
Surface Engineering, 13, 389-392 (1997).
R. K. Singh, A.Ata, J. M. Fitz-Gerald, W. Hendrickson, “Dry Coating
Method for Surface Modification of Particulates”, Journal of Surface
Engineering, 13, 295-298 (1997).
R. K. Singh, J. M. Fitz-Gerald, “Laser Induced Formation of Micro-Rough
Structures”, J. of Nuclear Instruments and Methods in Physics Research B,
121, 363-366 (1997).
R. K. Singh, D. R. Gilbert, J. M. Fitz-Gerald, S. Harkness, D. G. Lee,
“Engineered Interfaces for Adherent Diamond Coatings on Large ThermalExpansion Coefficient Mismatched Substrates”, Science, 272, 396-398
(1996).
Submitted
1)
2)
3)
C.E. Allmond, V. Oleshko, J.M. Howe, and J.M. Fitz-Gerald, “HRTEM and
FE-AEM of Noble Metals Fabricated by Pulsed-Laser Deposition”,
Submitted to the J. of Applied Physics A, May 05.
J. D. Fowlkes, P. D. Rack, and J.M. Fitz-Gerald, “Ultraviolet emitting (Y1thin films deposited by radio frequency magnetron sputtering;
xGdx)2O3-x
Structure – property – thin film processing relationships”, Submitted to J.
of Thin Solid Films, May 05.
Y. Deng, J.D. Fowlkes, P.D. Rack, and J.M. Fitz-Gerald, “Thin Film rf
Magnetron Sputtering of Gadolinium Doped Yttrium Aluminum Garnet
Ultraviolet Emitting Materials”, J. of Optical Science, March 05.
In-Preparation
1)
R. Bansal, R. Hull, J.M. Fitz-Gerald, “High-Resolution Three Dimensional
Reconstruction: A Combined Scanning Electron Microscope and Focused
Ion Beam Approach”, to be submitted to the J. of Vac. Sci. and Tech. B,
June 05.
2)
3)
4)
5)
6)
7)
M. Shappirio, R. Wiens, J. M. Fitz-Gerald, “Calibration of Isotopic Mass
Fractionation Ratios of Lunar Materials by Laser Ablation of Silicon and
Quartz”, to be submitted to Rev. of Scientific Instruments, 05.
A. T. Sellinger, K. Gogick, G. Peman, E. M. Leveugle, L. V. Zhigilei, J. M.
Fitz-Gerald, “Laser Processing of Polymer Nanocomposite Thin Films:
Experimental and Computational Methodologies” to be submitted to the J.
of Physics, September 05.
J.G. Hoekstra, T. Aburada, M.A. Jakab, S.B. Qadri, G. J. Shiflet, S. J.
Poon, J.R. Scully, J.M. Fitz-Gerald, “Laser Processing of Crystalline Fe
and Al Based Glass-Forming Alloys for Enhanced Corrosion Resistance”
to be submitted to the J. of Physics, September 05.
T. Aburada, C.T. Nelson, R. Smith, S. Qadri, J.M. Fitz-Gerald, “Growth of
Novel NaCdF3 Thin Films by Pulsed Laser Deposition for Advanced
Ferroelectric Applications”, to be submitted to the J. of Vac. Sci. Tech. A
November 05.
T. Aburada, J.G. Hoekstra, M.A. Jakab, S.B. Qadri, G. J. Shiflet, S. J.
Poon, J.R. Scully, J.M. Fitz-Gerald Laser Processing of Crystalline
Technologically Relevant Glass-Forming Alloys for Enhanced Corrosion
Resistance” to be submitted to the J. of Vac. Sci. Tech. A November 05.
A. T. Sellinger, K. Gogick, G. Peman, E. M. Leveugle, L. V. Zhigilei, J. M.
Fitz-Gerald, “Laser Processing of Polymer Nanocomposite Thin Films” to
be submitted to the J. of Vac. Sci. Tech. A November 05.
Extended Abstracts and Short Reviews
1)
C. Lovell, E. Worthington, T. J. Deming, G. D. Stucky, J. Kang, K. E. Wise,
J. S. Harrsion, J. M. Fitz-Gerald, C. Park, "Single Wall Carbon Nanotube
Co-Polypeptide BioNanocomposites for Potential Aerospace Applications”,
Proceedings of the 227th ACS National Meeting, Polymeric Materials
Science and Engineering, August (2005)
2)
J.D. Talton, B.B. Eppler, and J.M. Fitz-Gerald, “Pulsed Laser-Assisted
Surface Modification / Functionalization, Surfacts in Biomaterials, 8, Issue
2, pp.4 (2003).
3)
J.D. Talton, B. Eppler, and J.M. Fitz-Gerald, “Polymer Microencapsulated
Particles for Improved Inhalation Delivery of Antibiotics Prepared using the
NanocoatTM process”, Proceedings of the 226th ACS National Meeting,
Polymeric Materials Science and Engineering, 89, 816 (2003).
4)
J.M. Fitz-Gerald, P.D. Rack, “Use of Pulsed Laser Deposition to Deposit
Tellurium-Doped Thin Films”, Technical Insights Alert, Copyright 2003
Frost & Sullivan ISSN 0896-422X, AUGUST 29, 2003.
5)
D.B. Chrisey, A. Piqué, J. Fitz-Gerald, B. Ringeisen and R. Mohdi; Laser
Direct Writing Builds Biostructures; Laser Focus World 36, 113 (2000)
Book / Unique Publications
1)
Book Chapter in “Pulsed Laser Deposition of thin films: Applications in
Electronics, Sensors, and Biomaterials”; Chapter title: J.D. Talton, B.
2)
3)
Eppler, M.I. Davis, A.L. Mercado, and J.M. Fitz-Gerald “Coating Powders
for Drug Delivery Systems Using Pulsed Laser Deposition”, edited by D. B.
Chrisey, (In-Press) 2005.
Book Chapter in “Direct Write Technologies for Rapid Prototyping
Applications; Chapter title: “Matrix Assisted Pulsed Laser Evaporation
Direct Write (MAPLE DW): A New Method to Rapidly Prototype Organic
and Inorganic Materials”, James M. Fitz-Gerald, Philip D. Rack, Bradley
Ringeisen, Daniel Young, Rohit Modi, Ray Auyeung, Huey-Daw Wu;
Chapter 17, pp. 517-553, Academic Press 2001
A. Piqué, R.A. McGill, J.M. Fitz-Gerald, E.J. Houser and D.B. Chrisey,
“Growth of High-Quality Organic and Polymer Thin Films by the Matrix
Assisted Pulsed Laser Evaporation (MAPLE) Technique”, NRL Review
NRL/PU/6372-00-409, 61 (2000).
Refereed Conference Proceedings
1)
2)
3)
4)
5)
6)
7)
8)
D.S. Lee, A.J. Steckl, U. Hommerich, E.E. Nyein, P.D. Rack, J.M. FitzGerald, J.M. Zavada, “Enhanced blue emission from Tm-doped Al/sub
x/Ga/sub 1-x/N electroluminescent thin films” International-SemiconductorDevice-Research-Symposium-IEEE-Cat.-No.03EX741. 5-6 (2003)
A.L. Mercado, J. M. Fitz-Gerald, R. Johnson, C. Fraser, and J.D. Talton,
“Application of Matrix Assisted Pulsed Laser Evaporation Methods for the
Development of Biodegradable Powder Coatings and Thin Films”, Mat.
Res. Soc. Proc., 780, pp. Y4.4.1, (2003).
J. M. Fitz-Gerald, J. Hoekstra, R.K. Bansal, J.D. Fowlkes, P.D. Rack,
“Temperature Depndent Cathodoluminescence Characterization of
Ultraviolet Emitting Thin Films Grown by Pulsed Laser Deposition”, Mat.
Res. Soc. Proc., 780, pp. Y1.4.1, (2003).
J. Fowlkes, P. D. Rack, R. Bansal and J. M. Fitz-Gerald,
“Cathodoluminescence Study of Gadolinium-Doped Yttrium Oxide Thin
Films Deposited By Radio-Frequency Magnetron Sputtering”, Mat. Res.
Soc. Proc., 764, pp. C712.1 (2003).
J. M. Fitz-Gerald, J. Hoekstra, J.D.Fowlkes, and P.D. Rack, “Ultraviolet
Emitting SrS:Te Thin Films”, Mat. Res. Soc. Proc. Fall, 744, pp.M4.1.1
(2002).
Piqué, P.K. Wu, J. Fitz-Gerald, D. Chrisey, R.A. McGill, V. Nguyen,”
Advances in the Growth of Organic Thin Films Using the Matrix Assisted
Pulsed Laser Evaporation (Maple) Technique”, Mat. Res. Soc. Proc., 624,
(2001).
P.D. Rack, J. Fitz-Gerald, A.C. Geiculescu, H.J. Rack, A. Piqué, R.C.Y.
Auyeung and D.B. Chrisey; Deposition of Ceramic Materials Using
Powder and Precursor Vehicles Via Direct Write Processing; Mat. Res.
Soc. Proc., 624, 29 (2001).
J. Fitz-Gerald, D.B. Chrisey, A. Piqué, R.C.Y. Auyeung, R. Modi, H.D.
Young, H.D. Wu, S. Lakeou and R. Chung; Matrix Assisted Pulsed Laser
Evaporation Direct Write (MAPLE DW): A New Method to Rapidly
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
Prototype Active and Passive electronic Circuit Elements; Mat. Res. Soc.
Proc., 624, 143 (2001).
R.C.Y. Auyeung, H.D. Wu, R. Modi, A. Piqué, J. Fitz-Gerald, H.D. Young,
S. Lakeou, R. Chung and D.B. Chrisey; Matrix Assisted Laser Transfer of
Electronic Materials for Direct Write Applications; SPIE Proc.4088, 393
Japan (2000).
D.B. Chrisey, Pique, J. Fitz-Gerald, R.C.Y. Auyeung, R.A. McGill, H.D. Wu,
and M. Duignan, “Direct Writing of Conformal Mesoscopic Electronic
Devices by MAPLE DW”, European Mat. Res. Soc. Meeting, May 29 –
June 2, 2000, Strasbourg, France (2000).
A. Piqué, J. Fitz-Gerald, D.B. Chrisey, R.C.Y Auyeung, H.D. Wu, S.
Lakeou and R.A. McGill; Direct Writing of Electronic Materials Using a
New Laser Assisted Transfer/Annealing Technique; SPIE Proc. 3933, 105
(2000).
P. K. Wu, J. Fitz-Gerald, A. Piqué, D.B. Chrisey, and R.A. McGill,
“Deposition of Nanotubes and Nanotube Composites using MatrixAssisted Pulsed Laser Deposition”, Mat. Res. Soc. Proc. Spring, 617, J2.3
(2000).
J. Fitz-Gerald, D.B. Chrisey, A. Piqué, R.C.Y. Auyeung, R. Modi, H.D.
Young, H.D. Wu, S. Lakeou and R. Chung; “Matrix assisted pulsed laser
evaporation direct write (MAPLE DW): a new method to rapidly prototype
active and passive electronic circuit elements”, Mat. Res. Soc. Proc.
Spring, 625 (Solid Freeform and Additive Fabrication), 99-110 (2000).
A. Piqué, D.B. Chrisey, R.C.Y. Auyeung, J.M. Fitz-Gerald, P.D. Wu, R.A.
McGill, M. Duignan, “A Novel Laser Transfer Process for the Direct Writing
of Electronic and Sensor Materials”, COLA'99 5th International
Conference, July 19-23, Gottingen, Germany (1999).
R. A. McGill, A. Piqué, D.B. Chrisey, J. Fitz-Gerald, V. Nguyen and R.
Chung; “Laser Processing of Polymers and Conductive Materials for the
Fabrication of Conductive Composite Coatings: Applications with
Chemical Sensors”; Proc. 6th Int. Conf. On Composites Eng., 563-564
(1999).
D.B. Chrisey, A. Piqué, R.C.Y. Auyeung, R.A. McGill, R. Chung, S.
Lakeou, P. Wu, J.M. Fitz-Gerald, H. D. Wu, and M. Duignan, “A New
Approach to Laser Direct Writing Active and Passive Mesoscopic
Elements”, Surface Engineering: Science and Technology I , 143-154
(1999).
A. Piqué, D.B. Chrisey, R.C.Y. Auyeung, S. Lakeou. R. Chung, R.A.
McGill, P.K. Wu. M. Duignan, J. Fitz-Gerald and H.D. Wu; “Laser Direct
Writing of Circuit Elements and Sensors”; SPIE Proc. 3618, 330-339
(1999).
J. M. Fitz-Gerald, R. K. Singh, “Novel Method for Synthesis of Engineered
Particulates with Thin Coatings”, Mat. Res. Soc. Proc. Fall ‘97, 501,
363-368 (1998).
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
29)
A. Ata, J. M. Fitz-Gerald, R. K. Singh, “Control of Particle Adhesion to
Surfaces by Depositing Nanometric Interfacial Layers”, Mat. Res. Soc.
Proc. Fall ’97,501, 381-385 (1998).
J.M. Fitz-Gerald, R.K. Singh, “Nanometric dry powder coatings using a
novel process”, Surface Modification Technologies XII Proceedings of the
Tenth International Conference on Surface Modification Technologies,
457-462 (1998).
D. Kumar, J. M. Fitz-Gerald, R. K. Singh, “Synthesis of High Temperature
Superconductive and Colossal Magnetoresistive Surfaces on Insulating
Particles” ‘97, Mat. Res. Soc. Proc. Fall, 501, 393-398 (1998).
J. M. Fitz-Gerald, S. Pennycook, H. Gao, V. Krishnamoorthy, J. Marcinka,
W. Glenn, R. K. Singh, Novel Method for Controlling Nano Thin Coatings
on Particulate Materials, Mat. Res. Soc. Proc. Spring’97, 526, 105-110
(1998).
K. Rajan, P. Sajgalik, R.K. Singh, D. Kumar and J. M. Fitz-Gerald,
“Synthesis and Microstructure of Conformal Coatings on Particulates”, Mat.
Res. Soc. Fall ‘97, 501, 313-320 (1998).
R. K. Singh, D. R. Gilbert, J. M. Fitz-Gerald, D. G. Lee, “Surface
Composites: A Novel Method to Fabricate Adherent Interfaces”, Surface
Modification Technologies X Proceedings of the Tenth International
Conference on Surface Modification Technologies, 478-486 (1997).
R. K. Singh, A. Ata, J. M. Fitz-Gerald, Y. Rabinovich, W. Hendrickson, Dry
Coating Method for Surface Modification of Particulates, Surface
Modification Technologies X Proceedings of the tenth International
Conference on Surface Modification Technologies, 909-917 (1997).
R. K. Singh, J. M. Fitz-Gerald, “Laser-Assisted Synthesis of Unique
Graded Surface Composites”, Mat. Res. Soc. Fall Meeting, 397 , 567-572
(1997).
J. M. Fitz-Gerald, P. D. Miller, T. Erturk, W. Catron, J. Milstein, “High
Temperature Compressive Test Methodology for Fiber Reinforced
Ceramic Composites”, Ceram. Eng. Sci. Proc. (17th Annual Conference
on Composites and Advanced Ceramic Materials), 14, 122-130 (1993).
R.H. Giles, A.J. Gatesman, J. Fitz-Gerald, S. Fisk and J. Waldman,
"Tailoring Artificial Dielectric Materials at Terahertz Frequencies", The
Fourth International Symposium on Space Terahertz Technology , Los
Angeles, CA, April (1993).
P. Miller, T. Eurturk, J. M. Fitz-Gerald, W. Catron, “High Temperature
Compression Test Apparatus for Fiber Reinforced Ceramic Composites”,
Ceram. Eng. Sci. Proc., 14, 389-397 (1993).
Upcoming Presentations
1)
E. Leveugle, L. V. Zhigilei, A. Sellinger, J. M. Fitz-Gerald, Molecular
Dynamics Simulations of Matrix-Assisted Laser Evaporation (MAPLE) for
Deposition of Nanocomposites“, to be presented at the 8th International
Conference on Laser Ablation, Banff, Canada, September 11-16, 2005
2)
3)
4)
5)
6)
7)
A. T. Sellinger, K. Gogick, G. Peman, E. M. Leveugle, L. V. Zhigilei, J. M.
Fitz-Gerald, “Laser Processing of Polymer Nanocomposite Thin Films:
Experimental and Computational Methodologies” to be presented at the
8th International Conference on Laser Ablation, Banff, Canada, September
11-16, 2005 (Journal of Physics)
J.G. Hoekstra, Aburada, M.A. Jakab, S.B. Qadri, G. J. Shiflet, S. J. Poon,
J.R. Scully, J.M. Fitz-Gerald, “Laser Processing of Crystalline Fe and Al
Based Glass-Forming Alloys for Enhanced Corrosion Resistance” to be
presented at the 8th International Conference on Laser Ablation, Banff,
Canada, September 11th - 16th, 2005 (Journal of Physics)
T. Aburada, C.T. Nelson, R. Smith, S. Qadri, J.M. Fitz-Gerald, “Growth of
Novel NaCdF3 Thin Films by Pulsed Laser Deposition for Advanced
Ferroelectric Applications”, to be presented at the 52nd International
American Vacuum Society Fall Meeting, Boston, MA, October 30 th November 4th, 2005 (JVSTA)
T. Aburada, J.G. Hoekstra, M.A. Jakab, S.B. Qadri, G. J. Shiflet, S. J.
Poon, J.R. Scully, J.M. Fitz-Gerald Laser Processing of Crystalline
Technologically Relevant Glass-Forming Alloys for Enhanced Corrosion
Resistance”, to be presented at the 52nd International American Vacuum
Society Fall Meeting, Boston, MA, October 30th - November 4th, 2005
A. T. Sellinger, K. Gogick, G. Peman, E. M. Leveugle, , L. V. Zhigilei, J. M.
Fitz-Gerald, “Laser Processing of Polymer Nanocomposite Thin Films” to
be presented at the 52nd International American Vacuum Society Fall
Meeting, Boston, MA, October 30th - November 4th, 2005 (JVSTA)
C. Lovell, E. Worthington, T. J. Deming, G D. Stucky, J. Kang, K. E. Wise,
J. S. Harrsion, J. M. Fitz- Gerald, C. Park, “Carbon Nanotube CoPolypeptide Bionanocomposites for Potential Aerospace Applications”, to
be presented at the 52nd International American Vacuum Society Fall
Meeting, Boston, MA, October 30th - November 4th, 2005
Presentations
1)
2)
3)
J.M. Fitz-Gerald, “Laser Processing and Surface Modification of Bulk
Crystalline Glass-Forming Alloys for Enhanced Corrosion Resistance”, to
be presented at the American Vacuum Society Meeting, New England,
(invited talk) Burlington, MA June 27-30 ’05.
J.G. Hoekstra, J. R. Scully, G. J. Shiflet, S.B. Qadri, and J.M. Fitz-Gerald,
“Laser Processing and Characterization of Materials”, 6th International
Symposium on Laser Precision Microfabrication 2005, Williamsburg, VA
April ‘05.
E. Leveugle, A. Sellinger, J.M. Fitz-Gerald, and L. Zhigilei, “Mechanisms
of Molecular Transport in Matrix-Assisted Laser Evaporation (MAPLE):
Computer Modeling and Experiments”, 6th International Symposium on
Laser Precision Microfabrication 2005, Williamsburg, VA April ‘05.
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
T. Aburada, C. T. Nelson, R. W. Smith, S. B. Qadri, and J. M. Fitz-Gerald,
“Growth of Novel NaCdF3 Thin Films by Pulsed Laser Deposition for
Advanced Ferroelectric Applications: An Initial Study”, 6th International
Symposium on Laser Precision Microfabrication 2005, Williamsburg, VA
April ‘05.
J.G. Hoekstra, J. R. Scully, G. J. Shiflet, S.B. Qadri, and J.M. Fitz-Gerald,
“Laser Processing and Characterization of Materials”, American Vacuum
Society, (invited talk) Orlando, FL March ‘05.
J.G. Hoekstra, G. J. Shiflet, J. Poon, S.B. Qadri, J. R. Scully, and J. M.
Fitz-Gerald, “Pulsed Laser Processing of Al-Co-Ce Alloys for Enhanced
Corrosion Protection”, Workshop on V-22 Rapid Repairs Meeting,
Charlottesville, VA March ‘05.
J.G. Hoekstra, G. J. Shiflet, S. J. Poon, J. R. Scully, and J. M. Fitz-Gerald,
“Laser Processing of Bulk Crystalline Alloys for Improved Corrosion
Resistance”, TMS International Meeting, San Francisco, CA, February ‘05.
J.T. Calla, C.E. Allmond, M.C. Raphulu, , R.J. Davis, and J.M. Fitz-Gerald,
“Formation and Characterization of Au Coatings Deposited by Pulsed
Laser Deposition on Alumina Particles for Low Temperature Oxidation of
CO”, American Vacuum Society (AVS) National Meeting, Anaheim, CA,
November ‘04.
C. E. Allmond, V.P. Oleshko, J.M. Howe, and J.M. Fitz-Gerald, “The
Development of Pd and Ag nanoparticles with pulsed laser deposition”,
American Vacuum Society (AVS) National Meeting, Anaheim, CA,
November ’04.
R.K. Bansal, R. Hull, J.M. Fitz-Gerald, “Ultra High Resolution Tomographic
Reconstruction Using Scanning Electron Microscope and Focused Ion
Beam”, American Vacuum Society (AVS) National Meeting, Anaheim, CA,
November ’04.
J. G. Hoekstra, P. M. Mackey, N. Ünlü, G. J. Shiflet, J. R. Scully, and J. M.
Fitz-Gerald “Development of Amorphous Layered Structures by Laser
Irradiation for Enhanced Corrosion Resistance”, American Vacuum
Society (AVS) National Meeting, Anaheim, CA, November ‘04.
B. Eppler, A. Bawden, J.M. Fitz-Gerald, J. Talton, “Mucosal Delivery of
PLGA-Coated Nanoparticle Tuberculosis Subunit Vaccine Formulations,
American Association of Scientists (AAPS), Baltimore, MD, November ‘04.
C.E. Allmond and J.M. Fitz-Gerald, “Development and Characterization of
Metal and Metal Oxide Dehydrogenation Catalysts for Polycyclic Aromatic
Hydrocarbon Reduction, 6th Annual Philip Morris Symposium on
Fundamental Science, Richmond, VA, October ‘04.
A.L. Mercado, R. Johnson, C. L. Fraser, and J.M. Fitz-Gerald, “Pulsed
Laser Deposition vs. Matrix Assisted Pulsed Laser Evaporation for Growth
of Biodegradable Polymer Thin Films”, 41st Technical Meeting of the
Society of Engineering Science, Lincoln, NE, October ‘04.
R. Lee, J. Hoekstra, J. D. Fowlkes, P.D. Rack and J.M. Fitz-Gerald,
“Cathodoluminescence Imaging and Spectroscopy of Tellurium Doped
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
Group IIA Sulfide Materials for Solid State Ultra Violet Emitters”
Microscopy and Microanalysis Meeting, Atlanta, GA, August ‘04.
C.E. Allmond, V.P. Oleshko, J.M. Fitz-Gerald, J.M. Howe, “HRTEM and
FE-AEM of Noble Metals Fabricated by Pulsed-Laser Deposition”,
Microscopy and Microanalysis Meeting, Atlanta, GA, August ‘04.
T. Adams, J.M. Fitz-Gerald, “Pulsed Laser Deposited Coatings for
Hydrogen and Hydrogen Isotope Permeation Resistance”, TMS
International Meeting, San Francisco, CA, March ‘04.
D.S. Lee, A.J. Steckyl, U. Hommerich, E.E. Nyein, P.D. Rack, J.M. FitzGerald, J.M. Zavada, “Enhanced Blue Emission from Tm-doped AlxGa1-xN
Electroluminescent Thin Films” International Semiconductor Device
Research Symposium (ISDRS), December ’03.
V. Oleshko, C.A. Allmond, J.M. Fitz-Gerald, and J.M. Howe, “HighResolution Microscopy of Pd Nanoparticles Grown by Pulsed Laser
Deposition, MRS Fall Meeting, December 1-5th, Boston, MA USA ‘03.
A.L. Mercado, R.K. Bansal, C. L. Fraser, R. Johnson, and J.M. Fitz-Gerald,
“Growth of Biodegradable Thin Films by Methods of Pulsed Laser
Deposition”, American Vacuum Society 50th International Symposium,
November 3-7th, Baltimore, MD USA ‘03.
Y. Deng, J.D. Fowlkes, J.M. Fitz-Gerald, P.D. Rack, “Gadolinium-doped
Yttrium Aluminum Garnet Ultraviolet Emitting Materials Deposited by rf
Reactive Magentron Sputtering”, American Vacuum Society 50th
International Symposium, November 3-7th, Baltimore, MD USA ‘03.
J.D. Fowlkes, P.D. Rack, Y. Deng, J.M. Fitz-Gerald, R.K. Bansal,
“Gadolinium-doped Yttrium Oxide Thin Films Deposited by RadioFrequency Magnetron Sputtering; Film Quality and Cathodoluminescence
Properties”, American Vacuum Society 50th International Symposium,
November 3-7th, Baltimore, MD USA ‘03.
J.D. Talton, B. Eppler, J.M. Fitz-Gerald, “Polymer microencapsulated
particles for improved inhalation delivery of antibiotics prepared using the
Nanocoat (TM) process”, 226th ACS National Meeting, New York, NY,
September 7-11th, ‘03.
A. Mercado and J. Fitz-Gerald, “The Laser Processing of Biodegradable
Polymers”, NSF IGERT Retreat Meeting, Omni Hotel, Charlottesville, VA
August ‘03.
D. Gullat, P. Reinke, and J.M. Fitz-Gerald, “Silicon Carbide Formation Via
Laser Ablation, NSF IGERT Retreat Meeting, Omni Hotel, Charlottesville,
VA August ‘03.
J. M. Fitz-Gerald, A. Mercado, R. Johnson, C. Fraser, and J.D. Talton,
“Application of Matrix Assisted Pulsed Laser Evaporation Methods for the
Development of Biodegradable Powder Coatings and Thin Films”, MRS
Spring Meeting, San Francisco, CA, ‘03.
J. M. Fitz-Gerald, J. Hoekstra, J.D. Fowlkes, and P.D. Rack, “Pulsed
Laser Deposition of SrS:Te Thin Films”, MRS Spring Meeting,‘03.
S.J. Pearton, F. Kelly, R. Singh, and J.M. Fitz-Gerald, “GaN Emission”,
MRS Spring Meeting, San Francisco, CA, ‘03.
29)
30)
31)
32)
33)
34)
35)
36)
37)
38)
39)
40)
41)
P. D. Rack, J. Fowlkes, Y. Deng, S. Allison, and J. M. Fitz-Gerald,
“Gadolinium-doped Yttrium Oxide Ultraviolet Emitting Materials”, MRS
Spring Meeting, San Francisco, CA, ‘03.
J.D. Talton, B. Eppler, M. Davis, and J.M. Fitz-Gerald, “Characterization
and In Vitro Phagocytic Uptake by Pulmonary Macrophages of Nanocoat
Polymer-Coated Particles”, MRS Spring Meeting, San Francisco, CA, ‘03.
J.M. Fitz-Gerald, J. Hoekstra, J. Fowlkes and P.D. Rack, “Ultraviolet
Emitting SrS:Te Thin Films” (invited talk), Materials Research Society, Fall
Meeting, December 3rd ’02.
P.D. Rack, J.M. Fitz-Gerald, “Ultraviolet Emitting SrS:Te Thin Films”,
American Vacuum Society 49th International Symposium, Denver, CO,
USA ‘02.
J.M. Fitz-Gerald, “Photonic Based Processing of Materials” (invited talk),
Department of Chemical Engineering, UVa, October 31st, ‘02.
M. Shappirio, J.M. Fitz-Gerald, R. Wiens, J. Nordholt, D. Cremers, M.
Ferris,” Development of an Instrument for Isotopic and Elemental
Composition Analyses at Stand-Off Distances on Airless Planetary
Surfaces”, LPSC LIMS Meeting, ‘02.
G. Jennings, R. Johnson, C. Fraser, J. Fitz-Gerald, “Laser Processing of
Luminescent Polymeric Complexes”, International Materials Research
Congress, Cancun, Mexico, August 25-29th, ‘02.
James M. Fitz-Gerald, Jeff Hoekstra, Jason Fowlkes and Philip D. Rack,
“Ultraviolet Emitting SrS:Te Thin Films” (invited talk), International
Materials Research Congress, Cancun, Mexico, August 25-29th, ‘02.
J.M. Fitz- Gerald, A. Mercado, R. Johnson, C. Fraser, and J.D. Talton,
“Novel Application of Matrix Assisted Pulsed Laser Evaporation Methods
for the Development of Biodegradable Powder Coatings and Thin Films:
Microelectronics and Medical Industries, International Materials Research
Congress, Cancun, Mexico, August 25-29th, ‘02.
G. Jennings, R. Johnson, C. Fraser, J. Fitz-Gerald, “Laser Processing of
Luminescent Polymeric Complexes”, “Poster Session: Thin Films, Surface
and Materials Processing, Spring Meeting of the Mid Atlantic Chapter of
the American Vacuum Society, Applied Research Center, Newport News,
VA, May 29 – 31st, ‘02.
A. Mercado, R. Johnson, C. Fraser, J.D. Talton, J.M. Fitz-Gerald, “Novel
Application of Matrix Assisted Pulsed Laser Evaporation Methods for the
Development of Biodegradable Powder Coatings and Thin Films:
Microelectronics and Medical Industries”, Spring Meeting of the Mid
Atlantic Chapter of the American Vacuum Society, Applied Research
Center, Newport News, Virginia
May 29 – 31st, ‘02.
J.M. Fitz-Gerald, “Laser - Based Processing of Materials” (invited speaker),
Department of Biomedical Engineering, UVa, April 13th, ‘01.
J.M. Fitz-Gerald, “Laser - Based Processing of Next Generation Materials”
(invited talk), American Vacuum Society (AVS) Meeting, Boston, MA, June
11-12th ‘00.
42)
43)
44)
45)
46)
47)
48)
49)
50)
51)
52)
53)
R. Auyeung, A. Piqué, J. Fitz-Gerald, R. Modi, H.-D. Wu, S. Lakeou, R.
Chung, D. Chrisey, “Matrix Assisted Laser Transfer of Electronic Materials
for Direct Write Applications”, (invited talk) Laser Precision
Microfabrication Symposium, June 14-16th, Saitama, Japan ‘00.
D.B. Chrisey, Pique, J. Fitz-Gerald, R.C.Y. Auyeung, R.A. McGill, H.D. Wu,
and M. Duignan, “Direct Writing of Conformal Mesoscopic Electronic
Devices by MAPLE DW”, Eur. Mat. Res. Soc., May 29 – June 2, 2000,
Strasbourg, France (2000)
J.M. Fitz-Gerald, “Laser Direct Writing of Mesoscopic Conformal
Electronic Devices and Sensors” (invited talk), Spring MRS Meeting, San
Francisco, CA, April ‘00.
P.D. Rack, J.M. Fitz-Gerald, A.C. Geiculescu, H.J. Rack, A. Piqué, R.C.Y.
Auyeung, and D.B. Chrisey, “Deposition of Ceramic Materials Using
Powder and Precursor Vehicles via Direct Write Processing”, MRS Spring
Meeting, San Francisco, CA, April ‘00.
P. K. Wu, J. Fitz-Gerald, A. Piqué, D.B. Chrisey, and R.A. McGill,
“Deposition of Nanotubes and Nanotube Composites using MatrixAssisted Pulsed Laser Deposition”, MRS Spring Meeting, San Francisco,
CA, April ‘00.
J.D. Talton, J.M. Fitz-Gerald, R.K. Singh, “ Optimization of Processing
Parameters for Depositing Hydrophilic Polymer Films by Pulsed Laser
Deposition”, MRS Spring Meeting, San Francisco, CA, April ‘00.
J.D. Talton, J.M. Fitz-Gerald, R.K. Singh, “Deposition of Nano-Thin
Polymer Films for Improved Cell Interactions and Controlled-Release
Biomedical Applications”, MRS Spring Meeting, San Francisco, CA, April
‘00.
J.D. Talton, I. Coowanitwong, P. Sidharta, G. Hochhaus, J.M. Fitz-Gerald,
R.K. Singh, “Deposition of Biodegradable Polymer Films onto Drug
Particles for Controlled Release”, MRS Spring Meeting, San Francisco,
CA, April ’00.
D. Chrisey, A. Piqué, J. Fitz-Gerald, R. Auyeung, H-D. Wu, S. Lakeou, R.
Chung,” Matrix Assisted Pulsed Laser Evaporation Direct Write (Maple
DW): A New Method to Rapidly Prototype Active and Passive Electronic
Circuit Elements”, MRS Spring Meeting, San Francisco, CA, April ’00.
Piqué, P.K. Wu, J. Fitz-Gerald, D. Chrisey, R.A. McGill, V. Nguyen,”
Advances in the Growth of Organic Thin Films Using the Matrix Assisted
Pulsed Laser Evaporation (Maple) Technique”, MRS Spring Meeting, San
Francisco, CA, April ’00.
J. D. Talton, J. Fitz-Gerald, R. Singh, “Optimization of processing
parameters for depositing hydrophilic polymer films by pulsed laser
deposition”, MRS Spring Meeting, San Francisco, CA, April ’00.
J. D. Talton, J. Fitz-Gerald, R. Singh, Presentation, “Deposition of nanothin polymer films for improved cell interactions and controlled-release
biomedical applications”, MRS Spring Meeting, San Francisco, CA,
April ’00.
54)
55)
56)
57)
58)
59)
60)
61)
62)
63)
64)
65)
J.D. Talton, J. Fitz-Gerald, R. Singh and G. Hochhaus, “Nano-Thin
Coatings for Improved Lung Targeting of Glucocorticoid Dry Powders: Invitro and In-vivo Characteristics”, Respiratory Drug Delivery VII, Spring ‘00.
J.D. Talton, J.M. Fitz-Gerald, R.K. Singh and G. Hochhaus, “Improved
Pulmonary Targeting of PLGA Coated Budesonide Powders Formed by
Pulsed Laser Deposition. Society for Biomaterials”, Spring ‘00.
J. Talton, G. Hochhaus, J. Fitz-Gerald, R. Singh, “Synthesis of
Biodegradable Poly(lactic-co-glycolic acid) Films by Pulsed Laser
Deposition”, MRS Spring Meeting, San Francisco, CA, April ’99.
J. D. Talton, J. M. Fitz-Gerald, R. Singh, and G. Hochhaus,
“Characterization of Biodegradable Poly(lactic-co-glycolic acid) Coatings
on Budesonide using Pulsed Laser Deposition”, National AAPS
Conference ’99.
J. D. Talton, J. M. Fitz-Gerald, R. Singh, and G. Hochhaus, “Pulmonary
Targeting of Poly(lactic-co-glycolic acid) Coated Budesonide Dry Powders
vs. Uncoated Powders using an Ex Vivo Receptor Binding Assay in Rats”,
National AAPS Conference ‘99.
A. Piqué, J.M. Fitz-Gerald, D.B. Chrisey, R.C.Y. Auyeung, P.D. Wu, S.
Lakeou, R. Chung R.A. McGill, M. Duignan,”Direct Writing of Electronic
Materials Using a New Laser assisted Transfer/Annealing Technique”,
SPIE's International Symposium on LASE 2000, 24-28 January, San Jose,
CA ‘00.
R.A. McGill, E. Houser, R. Chung, V. Nguyen, D. Wier, A. Pique, D.
Chrisey, J. Fitz-Gerald, “Optimization of Chemical Detector Performance
Through Materials Processing and System Design”, Univ. of Maine,
January 28th, Maine ‘00.
D.B. Chrisey, A. Piqué, J.M. Fitz-Gerald, R.C.Y. Auyeung, R.A. McGill,
P.D. Wu, J. Greenblatt, M. Duignan, “Novel Laser-Based Processing of
Sensor and Electronic Devices and Subsystems”, The 9th Israel Materials
Engineering Conference, 6-7 December, Haifa, Israel ‘99.
J.M. Fitz-Gerald, P.D. Rack, D.B. Chrisey, “Laser Direct Writing of HighResolution Phosphor Screens”, MRS Fall Meeting, Boston, MA, November
‘99.
A. Piqué, R.C.Y. Auyeung, J.M. Fitz-Gerald, P.D. Wu, S. Lakeou, R.
Chung, D.B. Chrisey, R.A. McGill, M. Duignan, “Direct Writing of
Electronic and Sensor Materials Using a Novel laser Transfer Technique”,
MRS Fall Meeting, Boston, MA., November ‘99.
A. Piqué, D.B. Chrisey, R.C.Y. Auyeung, J.M. Fitz-Gerald, P.D. Wu, R.A.
McGill, M. Duignan, “A Novel Laser Transfer Process for the Direct Writing
of Electronic and Sensor Materials”, COLA'99 5th International
Conference, 19-23 July, Gottingen, Germany ‘99.
R.A. McGill, A. Piqué, D.B. Chrisey, J.M. Fitz-Gerald, V. Nguyen, R.
Chung, “Laser Processing of Polymers and Conductive Materials for the
Fabrication of Conductive Composite Coatings: Applications with
Chemical Sensors”, Sixth Int'l Conference on Composite Engineering, 27
Jun - 3 July, Orlando, FL ‘99.
66)
67)
68)
69)
70)
71)
72)
73)
74)
75)
76)
77)
78)
79)
80)
D.B. Chrisey, A. Piqué, R.C.Y. Auyeung, R.A. McGill, R. Chung, S.
Lakeou, P. Wu, J.M. Fitz-Gerald, and H. D. Wu, “A New Approach to
Laser Direct Writing Active and Passive Mesoscopic Elements”, European
Materials Research Society, July, ‘99.
D.B. Chrisey, J.M. Fitz-Gerald, P.D. Wu, A. Piqué, J. Horwitz, R.C.Y.
Auyeung, W. Chang, Kim, “Maple Direct Write: A New Approach to
Fabricate Ferroelectric Thin Film Devices in Air at Room Temperature”,
Ferroelectric Workshop, Puerto Rico, June ‘99.
J. M. Fitz-Gerald, “Laser Induced Forward Transfer of Phosphor Powders”,
MRS Spring Meeting, San Francisco, CA, April ‘99.
J. M. Fitz-Gerald, “Synthesis and Characterization of Engineered
Materials” (invited talk), American Physical Society (APS) Meeting, Atlanta,
GA March ‘99.
J. M. Fitz-Gerald, “Laser Induced Forward Transfer of Powders”, American
Physical Society (APS) Meeting, Atlanta, GA, March ‘99.
J. M. Fitz-Gerald, “The Role of Laser Processing in the Formation of
Biocompatible Dry Powder Asthma Drug Coatings” (invited talk), Astra
Draco Pharmaceutical Company, Inc., Lund, Sweden, March ‘99.
A. Piqué, D.B. Chrisey, R.C.Y. Auyeung, S. Lakeou, R. Chung, R.A.
McGill, P. K. Wu, M. Duignan, J. M. Fitz-Gerald, and H. D. Wu, “ Laser
Direct Writing of For Rapid Prototyping Applications”, SPIE’s LASE, San
Hose, CA, January ‘ 99.
Pulsed Laser Deposited Polymer Films onto Pulmonary Dry-Powders for
Improved Drug Delivery. J. Talton, G. Hochhaus, J. Fitz-Gerald, R. Singh;
Presentation, Fall MRS Meeting, Boston, December ‘98.
J. M. Fitz-Gerald et al, “Nano Particle Characterization and Growth During
Pulsed Laser Ablation Into Inert Atmospheres”, Fall MRS Meeting, Boston,
December ‘98.
J. M. Fitz-Gerald et al, “Synthesis and Characterization of Novel
Nanostructured Materials” (invited talk), Naval Research Laboratory,
Washington D.C., August ‘98.
J. M. Fitz-Gerald et al, “Synthesis and Modeling of Nanofunctionalized
Materials for Electronic Applications”, NSF Site Visit, Gainesville, FL,
August ‘98.
J. M. Fitz-Gerald, R.K. Singh et al, “ Z-Contrast Scanning Transmission
Electron Microscopy of Nanofunctionalized Particulate Materials” (invited
talk), Nano 98 Consortium, Stockholm, Sweden, June ‘98.
J. M. Fitz-Gerald, R.K. Singh et al, “Novel Coating Method for Phosphor
Material Applications”, Spring MRS Meeting, San Francisco, CA, April '98.
J. M. Fitz-Gerald, R.K. Singh et al “Novel Method for Nano Thin Coatings
on Particulate Materials”, Spring MRS Meeting, San Francisco, CA, April
'98.
J. M. Fitz-Gerald, R.K. Singh, “ Creation of Nanofunctionalized
Particulates”, Fall MRS Meeting, Boston, MA, November ‘97.
81)
82)
83)
84)
85)
86)
87)
88)
89)
90)
91)
92)
93)
94)
J. M. Fitz-Gerald, R. K. Singh, “Novel Method for Synthesis of Engineered
Particulates with Thin Coatings”, Fall MRS Meeting, Boston, MA,
November, ‘97.
A. Ata, J. M. Fitz-Gerald, R. K. Singh, “Control of Particle Adhesion to
Surfaces by Depositing Nanometric Interfacial Layers”, Fall MRS Meeting,
Boston, MA, November, ‘97.
D. Kumar, J. M. Fitz-Gerald, R. K. Singh, “Synthesis of High Temperature
Superconductive and Colossal Magnetoresistive Surfaces on Insulating
Particles”, Fall MRS Meeting, Boston, MA, November, ‘97.
J. M. Fitz-Gerald, “Laser Assisted Nano-Structured Coating of Colossal
Magnetorestrictive La-Ca-Mn-O System on Micron Sized Particles”, Fall
MRS Meeting, Boston, November ‘97.
K. Rajan, P. Sajgalik, R.K. Singh, D. Kumar and J. M. Fitz-Gerald,
“Synthesis and Microstructure of Conformal Coatings on Particulates”, Fall
MRS Meeting, Boston, MA, November, ‘97.
J. M. Fitz-Gerald, “ Synthesis and Characterization of Engineered
Particulates with Controlled Surface Architecture” , Industrial Advisory
Board Meeting, Engineering Research Center (ERC), Gainesville, October
‘97.
J. M. Fitz-Gerald, “ Surface Modification of Metals and Ceramics by
Pulsed Laser Ablation for Enhancement of Coating and Radiation
Properties” (invited talk) , Westinghouse: Bettis Atomic Power Laboratory,
Pittsburgh, November ‘97.
J. M. Fitz-Gerald, S. Pennycook, H. Gao, V. Krishnamoorthy, J. Marcinka,
W. Glenn, R. K. Singh, Novel Method for Controlling Nano Thin Coatings
on Particulate Materials, Spring MRS Meeting, San Francisco, CA, April,
‘97.
R. K. Singh, J. M. Fitz-Gerald, “Laser-Assisted Synthesis of Unique
Graded Surface Composites”, MRS Fall Meeting, Boston, MA, November
‘96.
R. K. Singh, D. R. Gilbert, J. M. Fitz-Gerald, D. G. Lee, “Surface
Composites: A Novel Method to Fabricate Adherent Interfaces”, Tenth
International Conference on Surface Modification Technologies,‘97.
R. K. Singh, A. Ata, J. M. Fitz-Gerald, Y. Rabinovich, W. Hendrickson, Dry
Coating Method for Surface Modification of Particulates, Tenth
International Conference on Surface Modification Technologies, ‘97.
R. K. Singh, J. M. Fitz-Gerald, “Laser-Assisted Synthesis of Unique
Graded Surface Composites”, MRS Fall Meeting, Boston, MA, November
‘97.
J. M. Fitz-Gerald, P. D. Miller, T. Erturk, W. Catron, J. Milstein, “High
Temperature Compressive Test Methodology for Fiber Reinforced
Ceramic Composites”, ACERS, 17th Annual Conference on Composites
and Advanced Ceramic Materials, Cocoa Beach, FL, January ‘93.
R. H. Giles, A. J. Gatesman, J. M. Fitz-Gerald, S. Fisk, J. Waldman,
“Tailoring Artificial Dielectric Materials at Terahertz Frequencies”, The
Fourth International Symposium on Space Terahertz Technology, ‘93.