SOFT OFFER CRUDE – REFINED OILS
PRIMER COMPANY BROKER REPRESENTATIVE
Azucar.financiamientos@gmail.com
SKYPE: juliovasquezcortez
ORIGIN OF OIL PRODUCTS, MALAYSIA, FILIPINAS & INDONESIA
MINIMUM 5,000 MT X 12 – MAXIMUM 100,000 MT X 12
1. REFINED SUNFLOWER OIL
Specific Gravity at 20c 0.916-0.923
Refractive Index at 20c 1472-1474
Lodine Value 120-143
Unsaponification 2.5 Max
Free Fatty Acid 0.1% Max. as Oleic Acid
Peroxide Value 1 Max. (meg/kg)
Color Max. 2 Red (on 5
Lovibond cell)
Moisture 0.1% Max
Appearance Clear and Bright
Odor and Flavor Odorless and Bland
PRICE REFINED SUNFLOWER OIL: U$D 930 PER METRIC TONE
Minimum 5000 ton bottled
2. CRUDE SUNFLOWER OIL
Grade Highest
Sunflower oil process Mechanical (expeller) pressing
Acid number, KOH/g 1.06
Moisture and volatile 0.08%
Free fatty acids 0.53%
Impurities 0.002
Unsaponifiables 1.2%
Color index, mg of iodine 15
Iodine value 125-145
Saponification value 180
Refractive index, 40C 1.4770
Specific weight, 20C 0.9165-0.9180
Peroxide, micromole/kg 5.5
Phosphor number 0.40%
Flash point, C minimum 225
PRICE CRUDE SUNFLOWER OIL: U$D 820 PER METRIC TONE
Minimum 5000 ton bulk
3. REFINED SOYBEAN OIL
Free Oil Acidity (Expressed OS Oleic Acid) 0.30% Max
Refractive Index at 40C 1.466-1.470
Peroxide Value (Meg. Gr/Kg) 1.0 Max
Saponification Value 189-195
Iodine Value 120-143
Density at 20C 0.909-0.925
Unsaponifiable Matters 1.5% Max
Appearance Clear
Soap Test 0.005% Max
Insoluble Impurity in Ether 0.05 Max
Volatile Matter at 105C Test Negative
Mineral Oil Test Negative
Sesame Seed Oil Test Negative
Cold Test after 24 Hours Negative
FF (Iron) 1.5 Max
CU (Copper) 0.1 Max
PB (Lead) 0.1 Max
PRICE REFINED SOYBEAN OIL: U$D 930 PER METRIC TONE
Minimum 5000 ton bottled
4. CRUDE SOYBEAN OIL
FFA (%) 2-4 max
MIU (%) 1-2m
Flashpoint (C) 121 min
Density (20C/ g/ml) 0.92
Viscosity at 50C(mm2/s) 20.5
Saponification value 192
Iodine value (Wijs) 131 max
PRICE SOYBEAN OIL CRUDE: U$D 820 PER METRIC TONE
Minimum 5000 ton bulk
5. REFINED CORN OIL
Fatty Acids (F.F.A) 0.1
Specific Gravity (25C) 0.915-0.922
Moisture 0
Unsaponifiable 2.0 max
Impurities 0
Saponification Value 187-193
Refractive Index (25C) 1.47-1.474
Iodine Number 103-128
PRICE REFINED CORN OIL: U$D 930 PER METRIC TONE
Minimum 5000 ton bottled
6. CRUDE CORN OIL
FFA (As Oleic) 3%max
Moisture / Impurities 0.5% max
Refraction Index 1.4719-1.4740 @25C
Iodine Index 120-144
Saponification Number 187/192
Non Saponification matter 1.0% max
Soluble in petroleter 0.1% max
Sediment 0.3% max
Flash point 121C min
Peroxide 2.0 MEQ 02/KG
PRICE CRUDE CORN OIL: U$D 820 PER METRIC TONE
Minimum 5000 ton bulk
7. REFINED CANOLA OIL
Free Fatty acids 1.5 % max
Moisture and Impurities 0.1 % max
Flash Point Min C 150
Cinematic Viscosity (40C), mm2/s max 38
Chlorophyll content, PPM max 30
Neutral Oil 98.5 % Min
Loss 1.5 % max
Phosphorous content, PPM max 120
Erucic Acid 2.0 % max
Sulfur, PPM 10.00
Oxidation Stability (110C), h min 5.0
Neutralization Value, mg KOH/g max 2.0
Ash Content 0.01 % max
Iodine Value, g/100g min 100 max 120
Water Content 0. 075% max
PRICE REFINED CANOLA OIL: U$D 930 PER METRIC TONE
Minimum 5000 ton bottled
8. CRUDE COCONUT OIL
FFA (as Lauric): 0.07% max Moisture : 0.1% max
Iodine Value (wijs): 7 - 12
Peroxide Value, mEq/Kg : 1.0 max
Saponification Value: 250 - 264
Unsaponifiable Matter : 1.0% max
Slip Melting Point : 23 - 26 deg C
Color : 1.0 max RED
10.00 max YELLOW
Fatty Acid Composition : (Actual Analysis)
Caproic Acid, C6 : 0.4%
Caprylic Acid, C8 : 6.5%
Capric Acid, C10 : 5.6%
Lauric Acid, C12 : 44.8%
Myristic Acid,C14 : 19.8%
Palmitic Acid, C16 : 10.4%
Stearic Acid, C18 : 2.9%
Oleic Acid, C18:1 : 7.6%
Linoleic Acid, C18:2 : 2.0%
Solid Fat Content at 10 degrees Celsius : 100%
20 deg C : 30.8%
25 deg C : 0%
PRICE CRUDE COCONUT: U$D 920 PER METRIC TONE
Minimum 5000 ton bulk
9. JATROPHA OIL
Oil purity: 98.5%
» FFA: 5% max
» Admixture: 0.5%
» Moisture: 0.8% MAX.
» Nature: Crude.
» Density: 0.920
» Cetane: 25 to 41
PRICE CRUDE JATROPHA OIL: U$D 820 PER METRIC TONE
Minimum 5000 ton bulk
10. CRUDE PALM OIL
Free Fatty Acid: as % Oleic: Max: 0.05
Moisture & Impurities: %: Max: 0.05
Taste: Bland
Iodine Value (Wijs): g 12/100g: Min: 48 Max: 56
Melting Point: rC: 38
Oxidative Stability: Rancimat
120rC, hours: Min: 11
Density 20rC: kg/m³ 912
Density 50rC: kg/m³ 892
Flame Point: rC 360
Flash Point: rC 320
Viscosity 50r: mm²/s 28
Carbon Residue: w.t%: 0.20
Cetane Number: 50
Caloric Value: kj/kg: Min: 37000
Sulfhur: mg/kg: 3
Phosphor: mg/kg: 4
PRICE CRUDE PALM OIL: U$D 820 PER METRIC TONE
Minimum 5000 ton bulk
11. REFINED PALM OIL
Specific gravity @ 25°C USP 0.911-0.918
Iodine value USP 50 - 55
Free fatty acids (as Oleic) USP 0.1% max
Moisture AOCS Ca 2c-25 0.1% max
Color Gardner AOCS Td la-64 3 max
Appearance White to pale yellow solid to semisolid lard-like fat
Flavor and Odr Bland, odorless
TYPICAL FATTY ACID COMPOSITION (%)
C12 & lower 2.5 max
C14:0 0.5 - 5.9 C18:1 34 - 44
C16:0 32 - 47 C18:2 7 - 12
C18:0 2 – 8
PRICE REFINED PALM OIL: U$D 930 PER METRIC TONE
Minimum 5000 ton bottled
12. RBD PALM OIL
1) butyro-refractometer reading at or refractive index at
40 º c : 43. 7 - 52. 5
40 º c :1. 4550 - 1. 4610
2) saponification value : 195 - 205
3) iodine value : 54. 62
4) unsaponifiable matter : max 1. 2 %
5) acid value : max 0. 5
6) ffa as oleic acid ( max) : 0. 25 %
7) peroxide value ( max) expressed as milli-equivalents of o2 per kg. : 10. 0
PRICE RBD PALM OIL CRUDE: U$D 840 PER METRIC TONE
Minimum 5000 ton bulk
13. REFINED RAPESEED OIL
1) Butyro-refractometer reading at 40 º c : or refractive index at 40 º c : 51.0 - 64.8
1.4600 - 1.4690
2) Saponification value : 166 - 198
3) Iodine value : 94 - 120
4) Unsaponifiable matter : 2%
5) Acid value : 0.6
6) FFA: 0.3 %
7) Peroxide value ( max) expressed as milli-equivalents of O2 per kg. :
8) Test for hydrocyanic acid :
NEGATIVE
10.0
9) Flash point ( pensky martens closed) :
250 º C
10) Moisture & other insoluble non-injurious impurities ( max ) ) : 0.1 %
PRICE REFINED RAPESEED OIL: U$D 930 PER METRIC TONE
Minimum 5000 ton bottled
14. CRUDE RAPESEED OIL
1. Free Fatty Acids(as OLEIC) Molecular Weight 282-basis Min.0.75pct -Max 1.25 pct
2. Moisture and votale Matter: Min.0.20pct - Max 0.25pct
3. Density(Specific Weight) at 25Celcius and 4Celcius: Min.0.9180 - Max 0.9255
4. Flash Point: Min.121 C (250F)
5. Saponification Value: Min. 188 - Max 198
6. Iodine Value WIIS : Min.12- Max143
7. Impurities (Insoluble in Petrol Ether): Max. 0.10pct
8. Unsaponifiables Matter (test as per N.O.P.A.): Max .1.50pct
9. Sediment(Gardner Break Test): Max.0.10pct
10. Lecithin(expressed as Phosphorous): Min.0.020pct-max0.025pct
11. Color Index(MG Iodine)(LovibondCell 1 inch): 50-60 yellow and 5-6 red
12. Refractive index at 20 degrees C: 1.505 to 1.512
13. Halphen reaction: Negative
PRICE CRUDE RAPESEED OIL: U$D 820 PER METRIC TONE
-----------------------------------------------------------------------------------------------------------------------------THE FOLLOWING CLAUSES WILL BE PRESENT IN ALL OF OUR SALES AGREEMENTS PLEASE
READ BEFORE COMMENCING ANY NEGOTIATIONS
PAYMENT TERMS FOR CONTRACT: NOT NEGOTIABLE
1) AFTER THE ACCEPTANCE AND SIGNING OF SALES AGREEMENT/CONTRACT, BUYER WILL
TRANSFER TO SELLER’S ACCOUNT A STAND-BY LETTER OF CREDIT AS A GUARANTEE FOR ONE
MONTH’S VALUE OF THE CONTRACT, PAYMENT EQUAL TO XXX MILLION XXXXXXXXX HUNDRED
XXXXXX THOUSAND DOLLARS USD $XX.XXX,000,00, THIS STAND BY BANK GUARANTEE MUST
BE TOTALLY UNRESTRICTED AND 100% OPERATIVE, TRANSFERABLE, DIVISIBLE AND
UNENCUMBERED, ISSUED BY A TOP 25 WORLD BANK, TO THE DESIGNATED BANK
COORDINATES IN THIS CONTRACT.
2) THERE WILL BE NO PERFORMANCE BOND THE 2% ISSUED ON THE ONE MONTH BANK
GUARANTEE!
3) THE BUYER WILL MAKE MONTHLY PAYMENTS VIA CASH WIRE TRANSFER, MT 103 T/T FOR
AN AMOUNT EQUAL TO USD $XXX,XXX,XXX,XXX.XX (XXXXX UNITED STATES DOLLARS), VALID
FOR THE FULL TERM OF THE PRESENT CONTRACT (12 MONTHS ETC…), THE PAYMENT OF THE
BALANCE OF THE CONTRACT SHALL BE OF 100% (ONE HUNDRED PERCENT) OF THE VALUE OF
EACH SUBSEQUENT SHIPMENT AND IT MUST BE MADE DIRECTLY TO THE SELLER’S BANK VIA
WIRE TRANSFER MT 103 T/T, TO THE BANK ACCOUNT COORDINATES DESIGNATED ON THE
PRESENT CONTRACT, AFTER THE SHIPMENT HAS ARRIVED AT THE PORT OF DESTINATION AND
BEFORE UNLOADING TAKES PLACE, UNDER INCOTERMS-DES, INCLUDED INTERNATIONAL
SURVEYOR’S INSPECTION BY CIQ OR SGS (AT BUYER’S EXPENSE) AND THE BUYER IS SATISFIED
WITH SUCH INSPECTION. THE BUYER WILL RECEIVE THE PROPER CERTIFICATES AND OTHER
DOCUMENTATION REGARDING BILL OF LADING, HEALTH AND CERTIFICATIONS OF QUANTITY
AND QUALITY, APPROVED BY SGS OR ITS EQUIVALENT BY INTERNATIONAL SURVEYOR,
AVAILABLE WITH EACH CARGO VESSEL LOADED, PROVIDED AT THE LOADING PORT.
4) SERVICES OF THE BUYER`S BANK INCLUDING THE CONFIRMATION FEES ARE AT BUYER`S
EXPENSE, SERVICES OF THE SELLER`S BANK ARE AT THE SELLER`S EXPENSE. SERVICES OF ALL
THE OTHER BANKS INVOLVED IN THE SETTLEMENTS AS PER THE PRESENT CONTRACT ARE AT
THE BUYER`S ACCOUNT
5) 30% ADVANCE AND 70% BY LETTER OF CREDIT IF THE AMOUNT IS 1.000 METRIC TONS OR
LESS.
5) PRICE PER SINGLE CONTAINER SHALL INCREASE ITS PRICE BY 20% AND MUST BE IN THE
FORM OF CASH PAYMENT IN ADVANCE!
INSPECTION
SGS INSPECTION SERVICE AT SELLER COST SHALL INSPECT THE COMODITY AT LOADING PORT.
Please Note
These prices may be subject to change without notice
The market prices for commodities and products commercialized by SELLER are subject to
change without notice.
EFFECTIVE DATE OF PAYMENT TERMS IMPLEMENTATION