SCHEDULE OF QUANTITY Name of Work :

advertisement
SCHEDULE OF QUANTITY
Name of Work :- D/O Satpula Lake Complex near Chirag Delhi.
Name of work :- Construction of Entry Plaza / Gate.
Sl.
Description of item
No.
1.
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (Not
exceeding 1.5m in width or 10 Sqm. on plan) including dressing of sides and ramming of bottoms lift up to 1.5m including getting
out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. (a) All kinds of soil.
2.
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth, 1.5m
in width as well as 10Sqm. on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m disposed earth to be
levelled and neatly dressed. (a) All kinds of soil.
3.
Filling available excavated earth ( excluding rock) in trenches, plinth, sides or foundation etc. in layers not exceeding 20cm in
depth, consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5m.
4.
Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering –all work up to
plinth level.
a) 1:5:10(1cement:5coarse sand:10 Graded stone aggregate 40mm nominal size).
5.
Brick work with F P S bricks of class designation 75 in foundation and plinth in cement mortar 1:6 ( 1cement:6 coarse sand).
6.
Providing machine cut Kota stone slab over 20mm ( average) thick base laid jointed with grey cement slurry mixed with pigment
to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 ( 1cement:4 coarse sand)
including cutting of stone by machine as per direction of Engineer-in-charge.
a) 25mm thick.
7.
Providing 800x100x100mm wide Delhi Quartzite over 20mm ( average) thick base laid jointed with grey cement slurry mixed
with pigment to match the shade of stone pointing with base of cement mortar 1:5(1cement: 5 coarse sand).
8.
Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer using structural steel etc. as required. (a) In gratings, frames, guard bar, ladder, railings, brackets gates and
similar works.
9.
Providing and fixing slate cladding of required pattern over 12mm thick bed of mortar 1:3( 1cement:3 coarse sand) pointing with
grey cement 3.30 Kg./Sqm. including pointing with white cement mixe. With pigment to match the shade as per direction of
Engineer-in-charge. (a) 12mm thick slate.
10. 40mm thick fine dressed stone flooring over 20mm ( average) thick base of cement mortar 1:5(1cement:5 coarse sand) with joints
finished flush including cutting sand stone slab by machine device as per direction of Engineer-in-charge. (a) Red Sand Stone.
11. Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering –all work up to
plinth level.
1:2:4(1cement:2coarse sand:4 Graded stone aggregate 20mm nominal size).
12. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
a) Two or more coats on New Work.
Qty.
NIT No.63/EE/SWD-5/DDA/11-12.
Estt. Cost: Rs.7,97,190/Unit
Rate
Amount
10.55
Cum.
144.00
Cum.
3.50
Cum.
4.85
Cum.
12.80
180.00
Cum.
Sqm.
176.36
Sqm.
2827.00
Kg.
76.90
Sqm.
5.10
Sqm.
37.60
Cum.
59.00
Sqm.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Marble work gang saw cut ( Polished and machine cut) of thickness 18mm for wall lining (Veneer work) in cement mortar 1:3 (
1cement:3 coarse sand) including pointing with white cement mortar 1:2 ( 1White cement:2 marble dust) with an admixture of
pigment to match the marble shade ( To be secured to the backing by means of cramps, which shall be paid for separately). Raj
Nagar Plain white marble/Udaipur green marble/Zebra Black Marble.
a) Area of slab over 0.50Sqm.
In graving with painting of letter on singnage board as per direction of Engineer-in-charge.
Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making
machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and
including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of
Engineer-in-charge.
Disposal of malba by mechanical transport including loading unloading and stacking for all leads and lift as per direction of
Engineer-in-charge. (a) Lime, building rubbish, etc.
Making spike in M.S. Square bar 20x20mm as required as per direction of Engineer-in-charge.
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish,
lead up to 50m and lift up to 1.5m (a) All kinds of soil.
Providing and laying at or near ground level factory made kerb stone of M-25grade cement in position to the required line, level
and curvature jointed with cement mortar 1:3 ( 1cement:3 coarse sand ) including making joints with or without grooves (thickness
of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as
per direction of Engineer-in-charge. ( Length of finished kerb edging shall be measured for payment).(Precast CC kerb stone shall
be approved by Engineer-in-charge).
Reinforced cement concrete work in walls ( any thickness) including attached pilasters, buttresses, plinth and string courses, fillets,
columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and
reinforcement.
a) 1:2:4 ( 1cement:2 coarse sand : 4 graded stone aggregate 20mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for:a) Foundations, footings, bases of columns for mass concrete
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (a)
Thermo-Mechanically Treated bars.
Stone work, plain in copings, cornices, string courses and plinth course, up to 75mm thick, in cement mortar 1:6
( 1cement:6 coarse sand) including pointing with white cement mortar 1:2(1White cement:2 stone dust) with an admixture of
pigment matching the stone shade. (a) Red Sand Stone.
Providing and fixing Delhi Quartized stone cladding of size 100x100x70mm thick ( average) on wall face with back filling /
Quantity of cement mortar 12mm thick ( average) of 1:3 ( 1cement:3 coarse sand)and finished the joints with White cement mortar
1:2 ( 1White cement:2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineerin-charge.
7.60
Sqm.
18.00
299.00
Per letter
Sqm.
90.00
Cum.
40.00
299.00
0.30
Each
100
Sqm.
Cum.
1.95
Cum.
48.60
Sqm.
195.00
Kg.
1.30
Cum.
22.25
Sqm.
Download
Related flashcards
Create Flashcards