ITEM NO.: EL-10070
ASSEMBLY INSTRUCTIONS:
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO TURN OFF MAIN POWER PRIOR
TO INSTALLATION. PLEASE READ THOROUGHLY. CAREFULLY UNPACK THIS LAMP AND PLACE ON
A SOFT SURFACE.
Do not touch the bulb with your bare hand at any time; use a soft cloth to clean/ install the bulb.
1. To take of the bracket out of the lamp. To position the fixing points by making remark-spots on the ceiling, the drill
the holes on the ceiling, put in the plastic screw-holders, followed with the Philips screw. To fix the bracket onto the
ceiling and to make sure it is tightly secured. See Fig.01
2. To put the 2 hooks in the canopy connected with the rings of the steel wires in the bracket, so as to support the
weight of the canopy, to make it easy to connect the wires for next step. See Fig.02 to Fig.05
3. To connect the power cable, in the ceiling with the wires of the lamp.
Please note: L: positive
N: negative
GND: earth wire
The wires must be connected tightly. See Fig.06
4. To mount the lamp up with the bracket an to tighten the bracket screws strongly. See Fig.07
5. To mount the crystal hooks. See Fig.08
6. To put the crystal on rightly & tightly and to avoid the crystals from falling down. See Fig.09
Note: This luminaire must be mounted or supported independently from an outlet box.
Use 7pcs 50W (Maximum) GU10 Type Bulb. (Bulbs included)
EXTRA ONE BULB INCLUDED.
Important instructions pertaining to a risk of fire, electric shock or injury.
WARNING - Lit lamp is HOT:
1. To reduce the risk of FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Touch only switch/plug when turning on.
3. Do not touch hot lens, guard, or enclosure.
4. Do not remain in light if skin feels warm.
5. Do not look directly at lit lamp.
6. Keep lamp away from materials that may burn.
7. Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.
8. Do not operate the unit with a missing or damaged guard, bulb containment barrier or UV light filter.
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.