SPICER AXLE AUSTRALIA
PRELIMINARY DATA SHEET
FOR
DRIVE AXLE ASSEMBLIES
Completing the following data sheet will provide sufficient preliminary information to
enable Spicer Axle Australia to assess, and cost, alternatives for the intended
application in the shortest possible time.
Please return via facsimile to :
Research and Development Department
Spicer Axle Australia Pty Ltd
Facsimile Number: + 61 - 2 - 9892 - 9450
Project Name / Number :
Company Name and Address :
Contact Name, Telephone & Facsimile No. :
Model of Vehicle :
Type of Vehicle :
Estimated Start of Production :
Estimated Annual Quantities :
Estimated Contract Life :
Is this Product :
A Replacement for an Existing Assembly or
A New Application
Please specify units in the following data :
Metric
Imperial
SPICER AXLE AUSTRALIA PTY LTD
ABN 56 004 256 982
205-231 FAIRFIELD RD (Cnr FORAY ST) YENNORA NSW 2161
P.O. BOX 99 FAIRFIELD NSW 2165 AUSTRALIA
TEL: +61-2-9892 9200
FAX: +61-2-9892 9450
Page 1 of 4
SPICER AXLE AUSTRALIA
1. Engine Details.
a) No. of cylinders & configuration :
b) Capacity :
c) Net Torque :
Nm / ftlbs
@ R.P.M.
2. Transmission Ratio Details.
a) Automatic Ratios :
1st.
2nd .
3rd
4th.
5th.
Rev
Converter Stall Ratio.
b) Manual Ratios :
1st.
2nd.
3rd.
4th.
5th.
6th.
Reverse
c) Transfer Box.
i) Ratios :
High Range
Low Range
ii) Torque Split (Front to Rear) :
3. Axle Ratio(s)
a) Axle Ratio (s)
with Automatic Transmission.
b) Axle Ratio (s)
with Manual Transmission.
4. Number & Position of Driving Axles.
a) No. of Driving Wheels :
b) Rear Wheel Drive :
c) Four Wheel Drive :
Part Time
Full Time
d) Other :
SPICER AXLE AUSTRALIA PTY LTD
ABN 56 004 256 982
205-231 FAIRFIELD RD (Cnr FORAY ST) YENNORA NSW 2161
P.O. BOX 99 FAIRFIELD NSW 2165 AUSTRALIA
TEL: +61-2-9892 9200
FAX: +61-2-9892 9450
Page 2 of 4
SPICER AXLE AUSTRALIA
5. Differential Type.
a) Open Differential :
b) Limited Slip :
Torque Sensitive
c)
Speed Sensitive (Hydratrak)
d) Cross Axle Diff Lock
6. Vehicle Type.
a) Passenger Car
b) Station Wagon
c) Utility / Pickup
d) Light Truck
7. Suspension Module Details
Front
or Rear
Suspension Module
a) Track Width
b) Type of Suspension
c) Please provide layout drawing details of proposed suspension design
package if this is to be supplied by Spicer Axle.
d) Tyre Rolling Radius
or Revs. / Kilometre or Mile
e) Tyre Coefficient of friction.
(If not stated will use 0.90 )
8. Vehicle Details :
a) Gross Vehicle Weight :
(kg/lbs)
b) Max. Laden Weight of Vehicle on Axles :
Front.
c) Max Trailer Weight to be Towed :
(kg/lbs)
d) Wheel Hub Details : (Drawing No.)
e) Brake / ABS Mounting Details : (Drawing No.)
SPICER AXLE AUSTRALIA PTY LTD
ABN 56 004 256 982
205-231 FAIRFIELD RD (Cnr FORAY ST) YENNORA NSW 2161
P.O. BOX 99 FAIRFIELD NSW 2165 AUSTRALIA
TEL: +61-2-9892 9200
FAX: +61-2-9892 9450
Page 3 of 4
Rear.
SPICER AXLE AUSTRALIA
9. General Comments
Please list any special requirements, duty cycles or vehicle details that may
assist in the preparation of a preliminary design and cost estimate.
-THANK YOU -
SPICER AXLE AUSTRALIA PTY LTD
ABN 56 004 256 982
205-231 FAIRFIELD RD (Cnr FORAY ST) YENNORA NSW 2161
P.O. BOX 99 FAIRFIELD NSW 2165 AUSTRALIA
TEL: +61-2-9892 9200
FAX: +61-2-9892 9450
Page 4 of 4