Chapter 14, Managing Data Storage
Instructor Note This chapter introduces data storage management. It prepares the students
to use compressed folders, NTFS compression, disk quotas, the Microsoft Encrypting File
System (EFS), Disk Defragmenter, Check Disk, and Disk Cleanup. Allow about 1 hour 20
minutes to 1 hour 40 minutes to cover all slides in this chapter, including demonstrations.
Lesson 1 introduces the students to the two types of compression found in Microsoft
Windows XP Professional: the Compressed Folders feature and NTFS compressed files and
folders. Allow about 20–25 minutes for Slides 2–10.
Lesson 2 introduces students to the concept of using disk quotas to manage storage growth.
It prepares them to allocate disk space to users based on the files and folders that each user
owns. Allow about 15–20 minutes for Slides 11–16.
Lesson 3 introduces students to EFS and prepares them to encrypt and decrypt files. Allow
about 20–25 minutes for Slides 17–23.
Lesson 4 introduces three tools available in Windows XP Professional: Disk Defragmenter,
Check Disk, and Disk Cleanup. It prepares students to use Disk Defragmenter to minimize
fragmentation and to use Check Disk to repair file system errors and recover readable
information from bad sectors. It also prepares them to use Disk Cleanup to free up disk
space by deleting temporary files and uninstalling programs. Allow about 20–25 minutes
for Slides 24–31.
Allow about five minutes to cover the chapter overview and chapter summary.
|1|
Chapter Overview
A.
B.
C.
D.
Managing Compression
Managing Disk Quotas
Increasing Security with EFS
Using Disk Fragmenter, Check Disk, and Disk Cleanup
Chapter 14, Lesson 1
Managing Compression
|2|
1.
Introduction to Windows XP Professional Compression
A.
Windows XP Professional supports two types of compression:
1.
The Compressed Folders feature
a.
Lets you create a compressed folder
b.
All files you store in that folder are compressed.
2.
NTFS compressed files and folder
a.
Lets you compress files and folders or an entire drive
b.
The drive must be formatted with NT file system (NTFS).
c.
Each file and folder on an NTFS formatted drive has a compression
state that is either compressed or uncompressed.
|3|
2.
Using Compressed Folders
Instructor Note Use the figure shown on Slide 3 and the following demonstration to explain
how to create a compressed folder.
1.
2.
3.
4.
Start Windows Explorer.
Click Local Disk (C:) to select it.
Click File, and then click New.
On the New menu, click Compressed (Zipped) Folder.
Remind the students that Compressed Folders is a new feature in Windows XP
Professional. The Compressed Folders feature is different from NTFS compressed
files and folders, which are covered in the next section.
A.
|4|
2
B.
The Compressed Folders feature lets you create compressed folders
and view their contents.
1.
Clicking Compressed (Zipped) Folder in Windows Explorer creates a
compressed folder in the current folder.
2.
Dragging and dropping files and folders into the compressed folder
automatically compresses them.
3.
Compressing large files lets you store more files on floppy disks or
hard disks.
4.
You cannot save files to a compressed folder.
5.
Double-click files in a compressed folder to view them.
6.
Dragging or copying files or folders in the compressed folder to an
uncompressed location automatically uncompresses them.
The Compressed Folders feature provides the following benefits:
1.
You can create and use compressed files and folders on file allocation
table (FAT), FAT32, and NTFS volumes.
2.
You can open files and run some programs directly from the compressed
folders.
3.
You can copy or move these compressed folders to any other drive or
folder
a.
On your computer
b.
On the Internet
c.
On your network
4.
Compressed folders are compatible with other zip programs.
5.
You can encrypt compressed folders that you created with the
Compressed Folders feature.
6.
You can compress folders without decreasing performance.
Outline, Chapter 14
Microsoft Windows XP Professional
|5|
3.
Using NTFS Compressed Files and Folders
Instructor Note Emphasize that the Compressed Folders feature and NTFS compressed
folders are two different features. Students new to Windows XP Professional may wonder
why two features that are so similar exist. Tell them that NTFS compression has been in
several earlier Microsoft Windows operating systems. Remind them that the Compressed
Folders feature is new to Windows with the release of the Windows XP Professional
operating system.
A.
B.
|6|
4.
You can read and write to compressed NTFS files
1.
From Windows–based applications
2.
From MS-DOS–based applications
3.
With operating system commands (such as Copy and Move)
Capabilities of the NTFS compression function
1.
Automatically uncompresses the file before making it available
2.
Automatically compresses the file when you exit or explicitly save the
file
3.
Allocates disk space based on the uncompressed file size
Compressing Files and Folders Using NTFS Compression
Instructor Note Use the figure shown on Slide 6 to explain how to use NTFS compression
to compress files and folders. Demonstrate how to compress files and folders.
1. In Windows Explorer, right-click the folder (or file) that you want to compress, and
then click Properties.
2. In the General tab, in the Attributes section, click Advanced.
3. Demonstrate that compression and encryption are mutually exclusive.
4. In the Advanced Attributes dialog box, select the Compress Contents To Save Disk
Space check box, and then click OK.
If you are using a folder that contains other files or folders, point out the Confirm
Attribute Changes dialog box.
A.
B.
C.
D.
You can set the compression state of files and folders.
You cannot use both NTFS encryption and compression because they
are mutually exclusive.
1.
If you select the Encrypt Contents To Secure Data check box, you
cannot compress the folder or file.
You must have the Write permission to change the compression state
for a file or folder.
The compression state of a folder does not reflect the compression
state of the files and subfolders that it contains.
1.
A folder can be compressed but all the files in the folder can be
uncompressed.
2.
A folder can be uncompressed but all or some of the files in the folder
can be compressed.
Outline, Chapter 14
Microsoft Windows XP Professional
3
E.
|7|
5.
When you compress a folder, Windows XP Professional displays the
Confirm Attribute Changes dialog box, which includes the following
options:
1.
Apply Changes To This Folder Only: compresses only the folder you
selected
2.
Apply Changes To This Folder, Subfolder, And Files: compresses the
folder and all subfolders and files it now contains, plus any files and
folders that are added later
Compressing a Drive or Volume Using NTFS Compression
Instructor Note Use the figure shown on Slide 7 and the following demonstration to explain
how to set the compression state of an entire NTFS drive or volume.
A.
B.
C.
D.
|8|
6.
You can set the compression state of an entire NTFS drive or volume.
Select the Compress Drive To Save Disk Space check box in the
Properties dialog box of the drive or volume that you want to compress.
When you click OK or Apply, the Confirm Attribute Changes dialog box
appears if the drive or volume you selected contains files or folders.
Select the appropriate check box and click OK. For example, on drive C
you ensure that the Apply Changes To C:\, Subfolders And Files check
box is selected, and then you click OK.
Displaying NTFS Compressed Files and Folders in a
Different Color
Instructor Note Use the figure shown on Slide 8 and the following demonstration to explain
how to display NTFS files and folders in a different color.
1. In Windows Explorer, on the Tools menu, click Folder Options.
2. In the View tab, in Advanced Settings, select or clear the Show Encrypted Or
Compressed NTFS Files In Color check box.
A.
B.
|9|
7.
By default, Windows Explorer displays the names of compressed files
and folders in a different color.
You can change the display color of compressed files and folders.
1.
In Windows Explorer, on the Tools menu, click Folder Options.
2.
In the View tab, select the Show Encrypted Or Compressed NTFS Files
In Color check box.
Copying and Moving Compressed Files and Folders
Instructor Note Use the figure shown on Slide 9 to explain the effects of copying and
moving compressed folders and files.
A.
4
When you copy a file within an NTFS volume, the file inherits the
compression state of the target folder.
Outline, Chapter 14
Microsoft Windows XP Professional
B.
C.
D.
E.
F.
When you move a file or folder within an NTFS volume, the file or folder
retains its original compression state.
When you copy a file or folder between NTFS volumes, the file or folder
inherits the compression state of the target folder.
When you move a file or folder between NTFS volumes, the file or
folder inherits the compression state of the target folder.
When you move or copy a file or folder to a FAT volume, Windows XP
Professional automatically uncompresses the file or folder.
When you move or copy a compressed NTFS file or folder to a floppy
disk, Windows XP Professional automatically uncompresses the file or
folder.
Instructor Note You might want to ask the students if they know why files and folders are
uncompressed when copied to a floppy disk. If they don’t know why, ask them if NTFS is
supported on floppy disks. (Answer: It is not.)
|10|
8.
NTFS Compression Guidelines
Instructor Note Use Slide 10 to discuss the following NTFS compression guidelines.
A.
B.
C.
D.
E.
Base your selection of file types to compress on the resulting file size
that you anticipate.
1.
Some file types compress more than others.
2.
Bitmaps contain more redundant data and often compress to less than 50
percent of the original file size.
3.
Application executable files rarely compress to less than 75 percent of
the original size.
Do not store compressed files, such as PKZIP files, in an NTFS
compressed folder.
1.
Windows XP Professional will try to compress the files again.
2.
This wastes system time and yields no additional disk space.
To make it easier to locate compressed files, Windows XP Professional
automatically uses a different display color for them.
Compress static data rather than data that changes frequently, because
compressing and uncompressing files incurs some system overhead.
Remember that NTFS compression can cause performance
degradation when you copy and move files.
1.
When you copy a compressed NTFS file, Windows XP Professional
uncompresses the file and then compresses the file again as a new file.
This might cause performance degradation.
Outline, Chapter 14
Microsoft Windows XP Professional
5
Chapter 14, Lesson 2
Managing Disk Quotas
|11|
1.
Understanding the Functions of Disk Quota Management
Instructor Note Use Slide 11 to explain the functions of disk quota management to the
students.
A.
B.
C.
D.
|12|
2.
Tracks and controls disk usage on a per-user, per-volume basis
1.
Tracks quotas on a per-volume basis even if the volumes are on the same
hard disk
2.
Tracks quotas on a per-user basis so every user’s disk quota is tracked
regardless of the folder the user stores files in
Bases disk usage on file and folder ownership
1.
Calculates a user’s disk space usage based on the files and folders the
user owns
2.
Copying a file, saving a file, or taking ownership of a file increases the
user’s disk usage.
Ignores compression when calculating disk usage
1.
Ignores disk usage of compressed files
2.
Calculates disk usage based on the uncompressed size of all compressed
files
Calculates free space for applications based on the user’s quota limit
System Administrator Use of Disk Quotas
Instructor Note Use Slide 12 to explain to the students what system administrators can use
disk quotas to do.
A.
To set a disk quota limit that specifies the amount of disk space for
each user
Instructor Note Remind students that disk quotas can only be applied to NTFS volumes.
B.
C.
D.
|13|
3.
To set a warning that specifies when Windows XP Professional should
log an event indicating that the user is nearing the limit
To enforce disk quota limits and deny users access if they exceed their
limit, or allow them continued access
To log an event when a user exceeds a specified disk space
threshold—either their quota limit or their warning level
Setting Disk Quotas
Instructor Note Use the figure shown on Slide 13 to explain the options for setting disk
quotas. Demonstrate how to enable disk quota management.
1. In Windows Explorer, right-click the disk for which you want to enable disk quotas,
and then click Properties.
6
Outline, Chapter 14
Microsoft Windows XP Professional
2. Click the Quota tab.
3. In the Quota tab, select Enable Quota Management.
Review the rest of the Quota tab.
Demonstrate how to enforce identical quota limits for all users.
1. Click Quota Entries, and then demonstrate how to enforce different quota limits for
users by double-clicking an entry for a user and modifying it.
Leave the Properties window open for the next demonstration.
A.
B.
C.
|14|
4.
You can enable disk quotas and enforce disk quota warnings and limits
for all users or for individual users.
You enable disk quotas with the following options on the Quota tab of
the Properties dialog box for the disk:
1.
Enable Quota Management: select this check box to enable disk quotas.
2.
Deny Disk Space To Users Exceeding Quota Limit: select this check
box so that when users exceed their hard disk space allocations, they
receive an “out of disk space” message and cannot write to the volume.
3.
Do Not Limit Disk Usage: select this check box if you do not want to
limit the amount of hard disk space.
4.
Limit Disk Space To: configures the amount of disk space that users can
have
5.
Set Warning Level To: configures the amount of disk space that users
can fill before Windows XP Professional logs an event, indicating that a
user is nearing his or her limit
6.
Log Event When A User Exceeds Their Quota Limit: select this check
box if you want Windows XP Professional to log an event in the
Security log every time a user exceeds his or her quota limit.
7.
Log Event When A User Exceeds Their Warning Level: select this
check box if you want Windows XP Professional to log an event in the
Security log every time a user exceeds the warning level.
8.
Quota Entries: click this button to open the Quota Entries For dialog
box, where you can add a new entry, delete an entry, and view the peruser quota information.
You can enforce identical quota limits for all users.
1.
Enter the values for the limit in the Limit Disk Space To and Set
Warning Level To text boxes.
2.
Select the Deny Disk Space To Users Exceeding Quota Limit check box.
Determining the Status of Disk Quotas
Instructor Note Use Slide 14 to explain to the students how you can determine the status of
disk quotas. The disk Properties dialog box used in the last demonstration was left open if
you want to switch to it and show the students a functioning traffic light.
A.
B.
Use the disk Properties dialog box to determine the status of disk quotas.
Click the traffic light icon and read the status message.
1.
A red traffic light indicates that disk quotas are not enabled.
Outline, Chapter 14
Microsoft Windows XP Professional
7
2.
3.
|15|
5.
A yellow traffic light indicates that Windows XP Professional is
rebuilding disk quota information.
A green traffic light indicates that the disk quota system is active.
Monitoring Disk Quotas
Instructor Note Use Slide 15 to explain to the students that you use the Quota Entries For
dialog box to monitor disk quotas. Review the fields in the Quotas Entries For dialog box.
A.
B.
|16|
6.
Use the Quota Entries For dialog box to monitor usage for all users who
have copied, saved, or taken ownership of files and folders on the
volume.
The Quota Entries For dialog box displays
1.
The amount of disk space that each user occupies
2.
A yellow triangle for users who are over their quota-warning threshold
3.
A red circle for users who are over their quota limit
4.
The warning threshold and disk quota limit for each user
Guidelines for Using Disk Quotas
Instructor Note Use Slide 16 to review the following guidelines for using disk quotas with
the students.
A.
B.
C.
D.
E.
F.
G.
8
Log on as Administrator if you need to install additional Windows XP
Professional components and applications.
1.
If a disk quota is enabled on the volume where Windows XP Professional
is installed and your user account has a disk quota limit, then installing
additional components or applications will increase your disk usage.
2.
If you log on as Administrator, Windows XP Professional will not
charge the disk space used in installing applications or additional
operating system files against your quota limit.
Clear the Deny Disk Space To Users Exceeding Quota Limit check box
when you enable disk quotas so that
1.
You can monitor hard disk usage and generate hard disk usage
information
2.
You will not prevent users from saving data
Set more restrictive default limits for all user accounts, and then modify
the limits to allow more disk space to users who work with large files.
Share disk space appropriately among all users who share the computer.
Set disk quotas on shared volumes to limit storage for users.
Set disk quotas on public folders and network servers to ensure that
users share hard disk space appropriately.
Delete disk quota entries for a user who no longer stores files on a
volume.
1.
All files that the user owns must be removed from the volume.
2.
Another user must take ownership of the user’s files.
Outline, Chapter 14
Microsoft Windows XP Professional
Chapter 14, Lesson 3
Increasing Security with EFS
|17|
1.
Understanding EFS
Instructor Note Use Slide 17 to introduce EFS to the students.
A.
B.
EFS lets users encrypt files on NTFS volumes.
1.
Makes information indecipherable to prevent unauthorized viewing or use
2.
Uses a strong public key cryptographic scheme
3.
Encrypts all files in a folder
EFS lets users with roaming profiles use the same key with trusted
remote systems.
1.
You can use EFS to encrypt and decrypt files on remote servers.
2.
You cannot use EFS to encrypt data that is transferred over the network.
Instructor Note Windows XP Professional provides network protocols, such as Secure
Sockets Layer (SSL) authorization, to encrypt data over the network.
C.
D.
E.
F.
|18|
G.
EFS lets you copy, move, or rename files, and the files remain encrypted.
1.
You must copy or move the files to an NTFS formatted volume to
maintain encryption.
2.
You may lose encryption if you copy or move the files to a volume not
formatted as NTFS.
EFS provides the ability for you to set policies to recover EFSencrypted data when necessary.
1.
The recovery policy is integrated with overall Windows XP Professional
security policy.
2.
You can delegate control of the recovery policy to individuals with
recovery authority, but only the recovered data is disclosed, not the key
that was used to encrypt the file.
a.
You must be logged on as a member of the Administrators group to
change the recovery policy in a workgroup.
b.
You can designate a user as a recovery agent who has the ability to
recover EFS-encrypted data.
EFS can be implemented either from Windows Explorer or from the
command line.
EFS can be enabled or disabled for a computer, domain, or
organizational unit (OU) by resetting recovery policy in the Group Policy
console.
EFS features
Instructor Note Use Slide 18 to discuss the following EFS features.
Outline, Chapter 14
Microsoft Windows XP Professional
9
1.
2.
3.
4.
|19|
2.
Transparent encryption
a.
File encryption does not require the file owner to decrypt and reencrypt the file on each use.
b.
Decryption and encryption happen transparently on file reads and
writes to disk.
Strong protection of encryption keys
a.
Public key encryption resists all but the most sophisticated methods
of attack.
b.
The file encryption keys are encrypted by using a public key from the
user’s certificate.
c.
Windows XP Professional (and Microsoft Windows 2000) uses
X.509 v3 certificates.
d.
The list of encrypted file-encryption keys is stored with the encrypted
file and is unique to it.
e.
To decrypt the file-encryption keys, the file owner supplies a private
key, which only the file owner has.
Integral data recovery system
a.
If the owner’s private key is unavailable, the recovery system agent
can open the file using his or her own private key.
b.
There can be more than one recovery agent, each with a different
public key, but at least one public recovery key must be present on
the system to encrypt a file.
Secure temporary and paging files
a.
Many applications create temporary files while you edit a document,
and these temporary files can be left unencrypted on the disk.
b.
EFS is implemented at the folder level, so any temporary copies of an
encrypted file are also encrypted, provided that the files are on NTFS
volumes.
c.
EFS resides in the Windows operating system kernel and uses the
nonpaged pool to store file encryption keys, ensuring that they are
never copied to the paging file.
Encrypting Files and Folders
Instructor Note Use Slide 19 to discuss the following points on encrypting files and folders
and then demonstrate how to mark a folder for encryption.
1. In Windows Explorer, right-click the folder you want to encrypt, and then click
Properties.
2. In the General tab, in the Attributes section, click Advanced.
3. Select the Encrypt Contents To Secure Data check box.
Point out to the students that the folder marked for encryption is not really encrypted;
only the files placed in the folder are encrypted.
A.
10
The recommended method to encrypt files is to create an NTFS folder,
encrypt it, and then copy, move, or save files to it.
Outline, Chapter 14
Microsoft Windows XP Professional
B.
C.
D.
E.
|20|
3.
Compressed files cannot be encrypted and encrypted files cannot be
compressed.
A file is encrypted by using file encryption keys.
1.
File encryption keys are fast symmetric keys designed for bulk encryption.
2.
A file is encrypted in blocks, with a different file encryption key for each
block.
All of the file encryption keys are stored and encrypted in the Data
Decryption Field (DDF) and the Data Recovery Field (DRF) in the file
header.
By default, the encryption provided by EFS is 56-bit encryption.
1.
For additional security, users can obtain 128-bit encryption by ordering
the Enhanced CryptoPAK from Microsoft.
2.
Files encrypted by the CryptoPAK cannot be decrypted, accessed, or
recovered on a system that supports only 56-bit encryption.
Decrypting Files and Folders
Instructor Note Use the figure shown on Slide 20 to explain why and how to decrypt files
and folders.
A.
B.
|21|
4.
You might want to decrypt a file if other people need access to the
folder or file; for example, if you want to share the folder.
Clear the Encrypt Contents To Secure Data check box in a folder’s or
file’s Advanced Attributes dialog box.
Using the Cipher Command
Instructor Note Use the example on Slide 21 to explain the Cipher command.
A.
B.
The Cipher command provides the ability to encrypt and decrypt from a
command prompt.
The Cipher command switches
1.
/e – encrypts the specified folders
2.
/d – decrypts the specified folders
3.
/s – performs the specified operation on files in the given folder and all
subfolders
4.
/a – performs the specified operation on files as well as folders
5.
/i – continues performing the specified operation even after errors have
occurred
a.
By default, the Cipher command stops if an error occurs.
6.
/f – forces the encryption operation on all specified files, even those that
are already encrypted
a.
Files that are already encrypted are skipped by default.
7.
/q – reports only the most essential information
8.
/h – displays files with the hidden or system attributes, which are not
shown by default
Outline, Chapter 14
Microsoft Windows XP Professional
11
/k – creates a new file encryption key for the user running the Cipher
command
a.
Using this switch causes the Cipher command to ignore all other
switches.
10. file_name – specifies a pattern, a file, or a folder
If you run the Cipher command without parameters, it displays the
encryption state of the current folder and any files that the folder
contains.
9.
C.
|22|
5.
Using the Recovery Agent
Instructor Note Use Slide 22 to discuss the recovery agent.
A.
B.
C.
|23|
6.
If you lose your file encryption certificate and associated private key due
to disk failure or any other reason, the recovery agent can open the file.
1.
The administrator of the local computer is the default recovery agent.
2.
If the computer is part of a domain, the domain administrator is the
default recovery agent.
The recovery agent can open a file using his or her own private key in
case the owner’s private key is not available.
The recovery agent can be on another computer in the network.
1.
In this case, send the file to the recovery agent.
2.
The recovery agent can bring his or her private key to the owner’s
computer.
3.
Never copy a private key onto another computer.
Disabling EFS
Instructor Note Use Slide 23 to explain to the students how to disable EFS.
A.
B.
C.
You can disable EFS for a domain, OU, or computer by applying an
empty Encrypted Data Recovery Agent policy setting or by deleting all
the existing recovery agents.
EFS must use the recovery agents listed in the Encrypted Data
Recovery Agents Group Policy agent.
If the Encrypted Data Recovery Agent policy setting is empty, EFS does
not operate.
Chapter 14, Lesson 4
Using Disk Defragmenter, Check Disk, and Disk Cleanup
|24|
1.
Defragmenting Disks
Instructor Note Use Slide 24 to introduce the students to fragmentation and
defragmentation.
12
Outline, Chapter 14
Microsoft Windows XP Professional
A.
B.
C.
D.
E.
|25|
Windows XP Professional saves files and folders in the first available
space on a hard disk, and not necessarily contiguous space.
Defragmenting is the process of finding and consolidating fragmented
files and folders.
Disk Defragmenter moves the pieces of each file or folder to one
location so that each file or folder occupies a single contiguous space
on the hard disk.
1.
Lets your system access files and folders more efficiently
2.
Consolidates free space, making it less likely that new files will be
fragmented
Disk Defragmenter can defragment FAT, FAT32, and NTFS volumes.
The Disk Defragmenter window
Instructor Note Use the figure shown on Slide 25 to explain the Disk Defragmenter
window. Demonstrate how to use Disk Defragmenter.
1. Click Start, and then point to All Programs.
2. Point to Accessories, point to System Tools, and then click Disk Defragmenter.
(You can also access Disk Defragmenter in the Performance And Maintenance
window by clicking Free Up Space On Your Hard Disk.)
Explain the Analyze button in the Disk Defragmenter dialog box.
1. Click Analyze.
While Disk Defragmenter is analyzing your system, explain the rest of the Disk
Defragmenter window.
1.
2.
3.
4.
5.
6.
|26|
2.
The upper portion of the dialog box lists the volumes that you can
analyze and defragment.
The middle portion graphically represents how fragmented the selected
volume is.
The lower portion shows a dynamic representation of the volume, which
is continually updated during defragmentation.
a.
Red indicates fragmented files.
b.
Dark blue indicates contiguous files.
c.
White indicates free space on the volume.
d.
Green indicates system files, which Disk Defragmenter cannot move.
The Analyze button does not perform defragmentation, but it provides a
review of the disk and a display of the current status.
The Defragment button is used to defragment the disk.
If you do not need to defragment the volume, the Disk Defragmenter
dialog box indicates there is no need to defragment it at that time.
Using Disk Defragmenter Effectively
Instructor Note Use Slide 26 to discuss some guidelines for running Disk Defragmenter.
Outline, Chapter 14
Microsoft Windows XP Professional
13
A.
B.
C.
D.
|27|
3.
Run Disk Defragmenter when the system will receive the least use.
1.
Data is moved around on the hard disk.
2.
Defragmentation is microprocessor-intensive.
3.
The defragmentation process adversely affects access time to other diskbased resources.
Educate users to defragment their hard disks at least once a month.
Analyze the target volume before you install large applications, and
defragment it if necessary.
When you delete a large number of files or folders, you should
defragment your hard disk.
Using Check Disk
Instructor Note Use Slide 27 to introduce Check Disk.
A.
B.
C.
4.
Check Disk attempts to repair file system errors.
Check Disk locates bad sectors and recovers readable information.
All files must be closed to run Check Disk.
Check Disk Options
Instructor Note Use Slide 28 to discuss the Check Disk options, and use the following steps
to demonstrate how to use the options in the Check Disk dialog box.
1. In Windows Explorer, select the disk you want to check.
2. On the File menu, click Properties, and then click Tools.
3. In the Tools tab, click Check Now.
Explain the Check Disk options in the Check Disk dialog box, and then click Cancel.
|28|
A.
|29|
B.
14
Check Disk dialog box options
1.
Automatically Fix File System Errors
a.
Specifies whether Windows XP Professional will attempt to repair
file-system errors found during disk checking
b.
All files must be closed for this program to run.
2.
Scan For And Attempt Recovery Of Bad Sectors
a.
Specifies whether Windows XP Professional will attempt to repair
file-system errors found during disk checking, locate bad sectors, and
recover readable information
b.
All files must be closed for this program to run.
c.
If you select this option, you do not need to select Automatically Fix
File System Errors because Windows will attempt to fix any errors on
the disk.
You can use the command-line version of Check Disk, the Chkdsk
command, which has the following switches:
Outline, Chapter 14
Microsoft Windows XP Professional
Instructor Note Use Slide 29 to review the switches available with the Chkdsk command,
and then demonstrate the following steps and use the help screen to explain the switches:
1.
2.
3.
4.
Click Start, and then click Run.
In the Open text box, type cmd and then click OK.
At the command prompt, type chkdsk /? and review the switches with the students.
Close the command prompt window.
1.
C.
filename
a.
Valid only on FAT or FAT32 volumes
b.
Specifies the file or set of files within the folder structure of the
volume to check
c.
You can use wildcard characters (* and ?).
2.
path
a.
Valid only on FAT or FAT32 volumes
b.
Specifies the location of a file or set of files within the folder
structure of the volume
3.
volume
a.
Valid only on FAT or FAT32 volumes
b.
Specifies the drive letter (followed by a colon), mount point, or
volume name
4.
/c
a.
Valid only on NTFS volumes
b.
Skips checking of cycles within the folder structure
5.
/f – fixes errors on the disk
6.
/i
a.
Valid only on NTFS volumes
b.
Performs a less vigorous check of index entries
7.
/l:size
a.
Valid only on NTFS volumes
b.
Changes the log file size to the specified number of kilobytes
c.
If size is not specified, it displays the current log file size.
8.
/r – locates bad sectors and recovers readable information
9.
/v
a.
On FAT or FAT32: displays the full path of every file on the disk
b.
On NTFS: displays any cleanup messages
10. /x
a.
Forces the volume to dismount first if necessary
b.
All opened handles to the volume would then be invalid.
Used without parameters, Chkdsk displays the status of the disk in the
current volume.
Outline, Chapter 14
Microsoft Windows XP Professional
15
|30|
5.
Using Disk Cleanup
Instructor Note Use the figure shown on Slide 30 to explain how to use Disk Cleanup, and
then demonstrate how to use Disk Cleanup.
1. In Windows Explorer, select the disk you want to check.
2. On the File menu, click Properties.
3. In the General tab, click Disk Cleanup.
Disk Cleanup calculates how much space you can save and then displays the Disk
Cleanup dialog box.
Review the Disk Cleanup deletion options. As you select each one (for example,
Downloaded Program Files), review the information shown in the Description text box.
4. Click the More Options tab, and then review the three options there.
A.
B.
C.
|31|
16
D.
You can use Disk Cleanup to free up disk space by deleting temporary
files and uninstalling programs.
Disk Cleanup lists files and programs you can safely delete.
The Disk Cleanup tab deletion options can include the following:
1.
Downloaded Program Files: deletes ActiveX controls and Java applets
2.
Temporary Internet Files: deletes files stored in the Temporary Internet
Files folder
3.
Offline Web Pages: deletes Web pages stored on your computer so that
you can view them without being connected to the Internet
4.
Recycle Bin: deletes files stored in the Recycle bin
5.
Temporary Files: deletes temporary files (for example, files in a Temp
folder)
6.
WebClient/Publisher Temporary Files: deletes the cache of accessed
files that WebClient/Publisher Service maintains locally for performance
reasons only
7.
Temporary Offline Files: deletes local copies of recently used network
files that have been automatically cached for you
8.
Offline Files: deletes local copies of network files that you have
specifically made available offline
9.
Compress Old Files: compresses files that have not been used recently
10. Catalog Files For The Content Indexer: deletes old catalog files left over
from previous indexing operations
The More Options tab options
1.
Windows Components
a.
Launches the Windows Components Wizard
b.
Lets you add or remove Windows components
2.
Installed Programs
a.
Launches Add Or Remove Programs
b.
Lets you install programs or uninstall programs that are no longer
needed
3.
System Restore deletes all but the most recent restore points.
Outline, Chapter 14
Microsoft Windows XP Professional
|32|
Chapter Summary
A.
B.
C.
D.
E.
|33|
F.
G.
H.
I.
J.
You can create compressed folders on FAT and NTFS volumes.
You can view the contents of, open files from, and encrypt compressed
folders.
You can copy or move compressed folders
1.
To any drive or folder on your computer
2.
To any drive or folder on the Internet
3.
To any drive or folder on your network
Compressed folders are compatible with other zip programs.
NTFS compression lets you compress files and folders only on NTFS
volumes.
Disk quotas let you manage and allocate hard disk space usage.
EFS lets users encrypt files on NTFS volumes to make them more
secure.
Disk Defragmenter moves pieces of each file and folder to a contiguous
location.
Check Disk attempts to repair file system errors and to recover
readable information from bad sectors.
Disk Cleanup frees up disk space by deleting temporary files and
uninstalling programs.
Outline, Chapter 14
Microsoft Windows XP Professional
17