CURRICULUM VITAE Name: Fatemeh Sadeghi E-mail: sadeghif@mums.ac.ir or fatemehsadeghi@yahoo.com Address: School of Pharmacy, Mashhad University of Medical Sciences, P.O Box: 91775-1365, Mashhad, Iran Academic Qualifications 1993-1996: Doctor of Philosophy degree (PhD) in Pharmaceutical Technology from School of Pharmacy, Liverpool John Moores University, Byrom st., Liverpool, L3 3AF, UK 1985-1990: Doctoral course of pharmacy (Pharm. D.), School of Pharmacy, Mashhad University of Medical Sciences, Mashhad, Iran Positions Held 2003- now Associate professor in Pharmaceutics, School of Pharmacy, Mashhad University of Medical Science, Iran. 1997-2003 Assistant professor, School of Pharmacy, Mashhad University of Medical Science, Iran. Research experiences and interests Formulation of sustained and controlled release matrices and reservoirs for oral delivery Development of technique to increase the solubility and dissolution rate of poorly water soluble drugs in order to increase their bioavailability Coating Solid dispersion systems Microencapsulation of solid and liquid drugs Pelletization using extrusion-spheronization technique Formulation of colon delivery systems Formulation of solid dosage forms Reviewer for following journals I have been chosen as an international referee for papers submitted for publication in international journals such as: European Journal of Pharmaceutics and Biopharmaceutics (Switzerland) Drug Development and Industrial Pharmacy (USA) Journal of Microencapsulation (UK) Iranian J. Pharm. Sci. (Iran) Iranian J. Pharm. Res. (Iran) Daru (Iran) Pharmaceutical Sciences (Iran) Publications 1- Abbaspour, M.R., Sadeghi, F., Afrasiabi Garekani, H., Design and study of ibuprofen disintegrating sustained release tablets comprising coated pellets. Eur. J. Pharm. Biopharm. 68 (2008) 747-759. 2- Sadeghi, F., Eidi, M., Ansaripoor, N., Afrasiabi Garekani, H. Preparation and evaluation of microcapsules containing diclofenac sodium and Eudragit RS or RL as oral sustained release multiparticulate delivery system. Pharmaceutical Sciences. Journal of Faculty of Pharmacy, Tabriz University of Medical Sciences. 1 Spring (2008) 9-18. 3. Sadeghi, F., Mosaffa, F., Afrasiabi Garekani, H. Effect of particle size, compaction force and presence of aerosil 200 on the properties of matrices prepared from physical mixture of propranolol hydrochloride and Eudragit RS or RL. Iranian Journal of Basic Medical Sciences. 10 (2007) 197-205. 4. Abbaspour, M.R., Sadeghi, F., Afrasiabi Garekani, H., Thermal treating as a tool to produce plastic pellets based on Eudragit RS PO and RL PO aimed for tableting. Eur. J. Pharm. Biopharm. 67 (2007) 260-267. 5. Akhagri, A., Sadeghi, F., Afrasiabi Garekani, H. Combination of time-dependent and pHdependent polymthacrylates as a single coating formulation for colonic delivery of indomethacin pellets. Int.J. Pharm. 320 (2006) 137-142. 6. Akhgari, A., Farahmand, F., Afrasiabi Garekani, H., Sadeghi, F., Vandamme, T.F., Permeability and swelling studies on free films containing inulin in combination with different polymethacrylates aimed for colonic drug delivery. Eur. J. Pharm. Sci. 28 (2006) 307-314. 7- Sadeghi, F., Afrasiabi Garekani, H. Ghodsi, S.A. Evaluation of solid dispersion systems of acetaminophen and ethylcellulose, Eudragit RS or RL and the effect of solvent used in preparation of these systems on characteristics of matrices. Pharmaceutical Sciences. Journal of Faculty of Pharmacy, Tabriz University of Medical Sceinces. 1 Spring (2006) 47-54. 8- Abbaspour, M.R., Sadeghi, F., Afrasiabi Garekani, H. Preparation and characterization of ibuprofen pellets based on Eudragit RS PO and RL PO or their combination. Int. J. Pharm., 303 (2005) 88-94. 9- Akhgari A., Afrasiabi Garekani, H., Sadeghi, F. and Azimaie, M. Statistical optimization of indomethacin pellets coated with pH-dependent methacrylic polymers for possible colonic drug delivery. Int. J. Pharm.,305 (2005) 22-30. 10- Sadeghi, F., Afrasiabi Garekani, H., Goli, F. Tableting of Eudragit RS and propranolol hydrochloride solid dispersion: Effect of particle size, compaction force and plasticizer addition on drug release. Drug Dev. Ind. Pharm. 30 (2004) 759-766. 11- Abbaspour, M.R., Sadeghi, F., Afrasiabi Garekani, H. Effect of drug loading on physicomechanical and release properties of ibuprofen pellets prepared by extrusionspheronization. Pharmaceutical Scienecs. Journal of Faculty of Pharmacy, Tabriz University of Medical Sceinces. 2 Autumn & Winter (2005) 55-64. 12- Afrasiabi Garekani, H.,Sadeghi, F. Salary, M. 2004, Dissolution study of acetaminophen crystallized in the presence of polyvinylpyrrolidone., J. Drug Del. Sci. Tech. 14 (2004) 141-146. 13- Sadeghi, F., Afrasiabi Garekani, H., Sadr, A. Influence of polymer viscosity and plasticizer addition on ethylcellulose matrix characteristics prepared from solid dispersion system. S.T.P. PHARMA SCIENCE. 13 (2003) 105-110. 14- Sadeghi, F. Afrasiabi Garekani, H., Sadeghi, R. Comparison of ethylcellulose matrix characteristics prepared by solid dispersion technique or physical mixing. DARU, 11 (2003) 713. 15- Sadeghi, F., Ford, J.L., Rajabi-Siahboomi, A.R. The influence of drug type on the release profiles from Surelease coated pellets. Int. J. Pharm. 254 (2003) 123-135. 16- Garekani, H.A., Sadeghi, F., Firouzpoor, A. The influence of propylene glycol and moisture on the compaction properties of acetaminophen granules. S.T.P. PHARMA SCIENCE. 13 (2003) 335-339. 17- Garekani, H.A., Sadeghi, F., Ghazi, A. Increasing the aqueous solubility of acetaminophen in presence of polyvinylpyrolidone and investigation of the mechanisms involved. Drug Dev. Ind. Pharm. 29 (2003) 173-179. 18- Sadeghi, F., Afrasiabi Garekani, H., Hajiaghapoor, N., Evaluation of Eudragit RS and RL solid dispersion systems in preparation of diclofenac sodium sustained release matrices. Pharmaceutical Scienecs. Journal of Faculty of Pharmacy, Tabriz University of Medical Sciences. 2 Autumn & Winter (2003) 49-62 19- Sadeghi, F., Ford, J.L., Rubinstein, M.H., Rajabi-Siahboomi, A.R. Study of drug release from pellets coated with Surelease containing hydroxypropylmethylcellulose. Drug Dev. Ind. Pharm. 27 (2001) 416-427. 20- Garekani, H.A., Sadeghi, F., Badiee, A., Mostafa, S.A., Rajabi-Siahboomi, A.R. Crystal habit modifications of ibuprofen and their physicomechanical characteristics. Drug Dev. Ind. Pharm. 27 (2001) 803-809. 21- Sadeghi, F., Afrasiabi Garekani, H., Farzadnia, Z., Effect of polymer viscosity, polymer particle size and compaction force on diclofenac sodium release from ethylcellulose matrices. Pharmaceutical Scienecs. Journal of Faculty of Pharmacy, Tabriz University of Medical Sciences. 2 Spring & Summer (2001) 45-56. 22- Sadeghi, F., Ford, J.L., Rubinstein, M.H., Rajabi-Siahboomi, A.R. Comparative study of drug release from hydroxpropylmethylcellulose or Surelease coated pellets. Drug Dev. Ind. Pharm. 26 (2000) 651-660. Presentations in international conferences 1- F. Sadeghi, M.R. Abbaspour, H. Afrasiabi Garekani. The effect of coating level on mechanical and release properties of cured Eudragit based ibuprofen pellets. Pharmaceutical Science World Congress, Amsterdam, Netherland, April 2007. 2- H. Afrasiabi Garekani, A. Akhgari, F. Sadeghi. Comparison of permeability and swelling characteristics of free films containing pectin or inulin in combination with time dependent polymethacrylate aimed for colonic drug delivery. Pharmaceutical Science World Congress, Amsterdam, Netherland, April 2007. 3- F.Sadeghi, M.R. Abbaspour, F., Tayarani, H. Afrasiabi Garekani. Mechanical and release behavior of ibuprofen pellets based on Eudragit RL plasticized with triethylcitrate. Biritish Pharmaceutical Conference, Manchester, UK, September 2006. 4- H. Afrasiabi Garekani, A. Akhgari, F. Sadeghi. Combination of Inulin as a bacterially degradable polysaccharide and Eudragit RS to achieve colon delivery of indomethacin pellets. British Pharmaceutical Conference, Manchester, UK, September 2006. 5- F.Sadeghi, M.R. Abbaspour, H. Afrasiabi Garekani. Effect of thermal treating on release and physicomechanical properties of ibuprofen pellets based on Eudragit RS and RL. 2nd EUFEPS Conference on optimizing drug delivery and formulation: Evaluation of drug delivery systems issues and perspectives (Paris, France, November 2005) 6- H. Afrasiabi Garekani, A. Akhgari, F. Sadeghi, Combination of time-dependent and pHdependent polymethacrylates as a single coating formulation for colonic delivery of indomethacin pellets. 2nd EUFEPS Conference on optimizing drug delivery and formulation: Evaluation of drug delivery systems issues and perspectives ( Paris, France, November 2005) 7-F. Sadeghi, H.A. Garekani, E.H. Moase, O. Meyer, T.M. Allen, Binding method for NGRtargeted liposomal doxorubicin using cells expressing the angiogenic marker CD13., Lipids, Liposomes, and Biomembranes Conference (Vancouver, Canada, July 2005). 8-Sadeghi, F., Abbaspour, M.R., Afrasiabi Grekani, H. Preparation and characterization of ibuprofen pellets based on Eudragit RS and RL or their combination. British Pharmaceutical Conference, Manchester, UK, September 2004. 9- Afrasiabi Garekani, H., Akhgari, A., Sadeghi, F. Indomethacin release from pellets coated with Eudragit S100 and Eudargit L100 combinations in media with different pH: an approach to colon delivery. British Pharmaceutical Conference, Manchester, UK, September 2004. 10- Kazemian, H., Hadizadeh, F., Sadeghi, F., Esmail-Nazari, Z. A zeolite based formulation of leukeran tablets: Synthesis, characterization and drug release evaluation. The 4th International Postgraduate Research Symposium on Pharmaceutics (IPORSIP). Istanbul, Turkey, September 2004. 11- Sadeghi, F., Afrasiabi Garekani, H., Goli, F. Solid dispersion of Eudragit RS and propranolol hydrochloride: Effect of particle size, compaction pressure and plasticizer addition. British Pharmaceutical conference, Harrogate, UK, September 2003. 12- Afrasiabi Garekani, Sadeghi, F., Salary, M. Dissolution study of paracetamol crystalised in the presence of polyvinylpyrrolidon (PVP). British Pharmaceutical conference, Harrogate, UK, September 2003. 13- Sadeghi, F. Sadr, A. Effect of plasticizer type and concentration on drug release from ethylcellulose matrices prepared by solid dispersion technique. British Pharmaceutical Conference, Manchester, UK, September 2002. 14- Sadeghi, F. Bakhshizadeh, M. Properties of granules and matrices of HPMC K4M prepared by wet granulation using different combinations of water and ethanol. “British Pharmaceutical Conference, Glascow, UK, September 2001. 15- Sadeghi, F. Preparation of ethylcellulose matrices by solid dispersion. 19 th Pharmaceutical Technology Conference, Baveno- Stresa, Italy, April 2000. Published: Proceedings 19 th Pharmaceutical Technology conference 2 (2000) 262-267. 16- Afrasiabi Garekani, H., Sadeghi, F., Badiee, A., Rajabi-Siahbomi, A.R. Crystal habit modifications of ibuprofen and their physico-mechanical characteristics.19 th Pharmaceutical Technology Conference, Baveno- Stresa, Italy, April 2000. Proceedings 19 th Pharmaceutical Technology conference 2 (2000) 324-333. 17- Sadeghi, F., Ford, J.L., Rubinstein, M.H., Rajabi-Siahboomi, A.R. Drug release from HPMC E15 and Surelease coated microcapsules. 12 th International Symposium on Microencapsulation. London, 6-8 September 1999. 18- Sadeghi, F., Ford, J.L. Rubinstein, M.H., Rajabi- Siahboomi, A.R. "Effect of drug type on release behaviour from coated pellets "23 rd International Symposium of Controlled Release of Bioactive Materials, Kyoto, Japan, July, 1996). Published: Proceedings International Symposium of Controlled Release of Bioactive Materials. 23 (1996)567-568. 19- Sadeghi. F., Ford, J.L., Rubinstein, M.H., Rajabi – Siahboomi, A.R., "Release Behaviour from coated pellets: Effect of drug type. 15 th Pharmaceutical Technology Conference, Oxford, U.K., March 1996. Published: Proceedings 15 th Pharmaceutical Technology conference 1 (1996) 289-306. 20- Sadeghi, F., Ford, J.L., Rubinstein, M.H., Rajabi-Siahboomi, A.R. "Metoclopramide hydrochloride release from coated pellets "14 th Pharmaceutical Technology Conference, Barcelona. Spain, April, 1995. Published: Proceedings 14 th Pharmaceutical Technology Conference, 1 (1995) 424-437. 21- Sadeghi, F., Ford, J.L., Rubinstein, M.H., Rajabi-Siahboomi, A.R. "Effect of polymer type and coating load on drug release from coated pellets "British Pharmaceutical Conference (Warwick, U.K., September, 1995).