Product Specification
Concure WB30
Water based wax emulsion, concrete curing compound – conforms to AS3799 / potable
water suitable
*1.00
Concrete Curing Compound
1.10
Concrete Surface
1.11
General
The curing compound should not be applied to soft, wet concrete or render surfaces which will
be disturbed and prevent formation of the curing film.
1.12
To those nominated floor areas requiring a curing compound, ensure the concrete surface is
completely free of stains, oils, form coatings, etc., to obtain good adhesion of the curing
compound, and to avoid obtaining discoloration or uneven surface effects. The curing compound
must not be used on surfaces subject to after trade treatments.
1.20
Curing Compound
1.21
The curing compound is to be a liquid applied curing compound which consists of a processed
blend of petroleum and resin based hydrocarbons.
1.22
The curing compound is to be applied evenly over the freshly laid concrete as soon as possible
after final trowelling, just after the disappearance of the surface bleed water for maximum water
retention, (approximately 1-2 hours depending on the ambient temperature and atmospheric
conditions) strictly in accordance with the manufacturer’s instructions and current technical data
sheet.
Parchem Construction Supplies
Document Date: 09/2009
Page 1 of 2
Parchem offers direct assistance with specifications for individual projects; we can visit the site, design office, or
arrange a meeting at our branch office. It is recommended that Parchem be consulted early in the design process.
For Technical Data Sheets (TDS), Specifications and Method Statements, please visit our website at
www.parchem.com.au. * To insert the Specification, Copy and Paste.
Product Specification
1.23
All designated areas are to have a liquid curing compound applied at an even coverage rate of 5
m2/litre. The curing compound is to provide the following properties:
Standards compliance:
Water retention efficiency:
Volume solids content:
AS3799-1998
90% minimum
30%
1.24
Concure WB30 from Parchem Construction Supplies meets the product criteria and is approved.
Parchem Construction Supplies
Document Date: 09/2009
Page 2 of 2
Parchem offers direct assistance with specifications for individual projects; we can visit the site, design office, or
arrange a meeting at our branch office. It is recommended that Parchem be consulted early in the design process.
For Technical Data Sheets (TDS), Specifications and Method Statements, please visit our website at
www.parchem.com.au. * To insert the Specification, Copy and Paste.