Human Rhinovirus (HRV) RT-PCR
Two-Step PCR Set up
Date: ________________
Initials: ________________
1. Label 0.2ml thin-walled strip tubes with ID # and put on ICE.
2. Add 4 µl of random dodecamers to each tube.
3. Add 2 µl of 10 mM dNTP Mix
4. Add 18 µl of sample and/ or control into the appropriate tube.
5. Keep tubes on ice until they are placed into the thermocycler.
6. Run the samples under the following conditions:
65ºC 5 min.
4ºC
∞
7. Keep samples on ice after removing from thermalcycler.
8. Make the Master Mix by combining the reagents listed below on ice. The reagent volume is
multiplied by n = the number of samples + 1.
Step 1 RT Reaction Mix
Added
TOTAL
1 Rxn
8.0 l
4.0 l
2.0 l
2.0 l
Total Rxn
8.0 * n
4.0 * n
2.0 * n
2.0 * n
16.0ul
16.0 * n
Reagent
Lot #
Exp.
Invitrogen 5XM-MLV-RT Buffer
DDT (0.1 M)
RNasin (40U/ml) RNase Inhibitor
Invitrogen M-MLV-reverse
transcriptase (10U/ml)
9. Add 16.0 l of RT Rxn Mix into each tube containing sample and decamer. Mix by
pipetting up and down. Change pipet tips between samples.
10. Quick spin tubes to remove air bubbles and put tubes into thermocycler.
11. Run under the following conditions.
Step
1
2
3
Temperature Time
37°C
1 hr
70°C
5 min
4°C
∞
HRV Step Two PCR
Date: ______________
Initials: ________________
Savolainen Primer (9565-reverse, 9895-forward) Protocol
Reaction and cycling conditions as referenced in Mulders et al.,Molecular epidemiology of coxsackievirus B4 and
disclosure of the correct VP1/2Apro cleavage site: evidence for high genomic diversity and long-term endemicity of
distinct genotypes. J General Virology, 2000, 81:803-812.
1. Label 0.2ml thin-walled strip tubes with ID # and put on ICE.
2. Calculate the appropriate amount of the PCR master mix by calculating n (n=the
number of reactions and controls plus one. Multiply the single Rxn volume by this
number.
PCR Master Mix
Added
TOTAL
1 Rxn
xn
= n Rxn
Lot #
37.2 μl
dH20 (Gibco Ultra Pure)
5.0 μl
Invitrogen 10X PCR buffer minus Mg
0.4 μl
dNTP (25mM)
1.5 μl
50 mM MgCl2
0.20 μl
9565-Forward Primer (50uM)
0.20 μl
9895-Reverse Primer (50uM)
0.50 μl
Invitrogen Platinum Taq DNA Polymerase
(5 U/µL)
45.0 μl
Exp.
TOTAL:
5.0 μl
TOTAL
Reagent
First Strand cDNA
50.0μl
3. Assemble the PCR components on ice, and mix gently.
4. Aliquot 45ul of the PCR mix into the previously labeled 0.2ml strip tubes.
5. Using a multichannel pipet, pipet 5.0 l of the sample cDNA into the PCR mix and
pipet up and down to mix.
6. Spin briefly and position tubes into the thermocycler.
7. Verify the program conditions before starting the program.
Step
1
2
3
Temperature
94°C
94°C
60°C
Time
5 min
15 sec
15 sec
Return to Step#
# Cycles
30 sec
2
40
(gradient 55-65)
4
6
72°C
4°C
∞
HRV Schnurr Primer (DK001, DK004) Protocol
Reaction and cycling conditions as referenced in Kiang etl al., Assay for 5’ Noncoding Region Analysis of All
Human Rhinovirus Prototype Strains, J Clin Microbiol, 2008, 46(11):3736-3745.
1. Label 0.2ml thin-walled strip tubes with ID # and put on ICE.
2. Calculate the appropriate amount of the PCR master mix by calculating n (n=the
number of reactions and controls plus one. Multiply the single Rxn volume by this
number.
PCR Master Mix
Added
TOTAL
1 Rxn
xn
Reagent
Lot #
37.2 μl
dH20 (Gibco Ultra Pure)
5.0 μl
Invitrogen 10X PCR buffer minus Mg
0.4 μl
dNTP (25mM)
1.5 μl
50 mM MgCl2
0.20 μl
DK001 Forward Primer (50uM)
0.20 μl
DK004 Reverse Primer (50uM)
0.50 μl
Invitrogen Platinum Taq DNA Polymerase
(5 U/µL)
45.0 μl
Exp.
TOTAL:
5.0 μl
TOTAL
= n Rxn
First Strand cDNA
50.0μl
3. Assemble the PCR components on ice, and mix gently.
4. Aliquot 45ul of the PCR mix into the previously labeled 0.2ml strip tubes.
5. Using a multichannel pipet, pipet 5.0 l of the sample cDNA into the PCR mix and
pipet up and down to mix.
6. Spin briefly and position tubes into the thermocycler.
7. Verify the program conditions before starting the program.
Step
1
2
3
4
6
Temperature
95°C
95°C
55°C
72°C
4°C
Time
5 min
15 sec
15 sec
30 sec
∞
Return to Step#
# Cycles
2
40