November 2009
Americas
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450,
USA
Phone: + 1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
Asia-Pacific
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: +65 6319 3450
Fax: +65 6319 3499
apr.securitysystems@bosch.com
www.boschsecurity.com
Product Guide Specification
Specifier Notes: This product guide specification is written according to the Construction
Specifications Institute (CSI) 3-Part Format, based on MasterFormat 2004 and The Project
Resource Manual—CSI Manual of Practice. The Manufacturer is responsible for technical
accuracy.
The section must be carefully reviewed and edited by the Architect or Engineer to meet the
requirements of the project and local building code. Words and sentences within brackets
[ ] are choices to include or exclude a particular item or statement. Coordinate this section
with other specification sections and the Drawings. Delete all “Specifier Notes” after editing
this section.
SECTION 28 23 16
VIDEO SURVEILLANCE MONITORING AND SUPERVISORY INTERFACES
BOSCH UML SERIES 8.4- AND 10.4-INCH GENERAL PURPOSE COLOR LCD FLAT PANEL
MONITORS
PART 1 – GENERAL
1.1
SUMMARY
A.
Section Includes:
1. Video Surveillance Monitoring and Supervisory Interfaces.
B.
Related Sections
1. Section [28 23 13 – Video Surveillance Control and Management Systems].
2. Section [28 23 23 – Video Surveillance Systems Infrastructure].
**********Specifier’s note: Include those standards referenced elsewhere in this SECTION.
2
1.2
REFERENCES
A.
Complies with Canadian Standards Association (CSA).
B.
European Norm:
1. Complies with EN Standards.
2. Complies with CE Regulations.
C. Federal Communications Commission (FCC) (www.fcc.gov):
1. FCC CFR 47 part 15 class A – Telecommunications – Radio Frequency
Devices – Digital Device Emission.
D. Complies with International Electrotechnical Commission (IEC) standards.
E.
Complies with International Committee on Electromagnetic Safety (ICES) 003
regulations.
F.
International Organization for Standardization (ISO):
1. 9001 – Quality System.
G. Underwriters Laboratories, Inc. (UL) (www.ul.com):
1. UL 50 Enclosures for Electrical Equipment.
2. UL 2043 Fire Test for Heat and Visible Smoke Release for Discrete Products
and their Accessories Installed in Air-Handling Spaces.
3. UL 60950-1 Information Technology Equipment - Safety.
1.3
DEFINITIONS
A.
LCD: A Liquid Crystal Display is a thin, flat display device made up of any number of
color or monochrome pixels arrayed in front of a light source or reflector.
B.
Response Time: The minimum time necessary to change a pixel's color or
brightness.
C. S-video: Separate video, also known as Y/C, is an analogue video signal that
carries the video data as two separate signals: brightness and color.
D. Contrast Ratio: The ratio of the intensity of the brightest bright to the darkest dark.
1.4
SYSTEM DESCRIPTION
A.
Video Surveillance Monitoring and Supervisory Interfaces:
1. General Purpose Color Flat Panel LCD Monitor.
Project Name/Project #/2-12-16
28 23 16- 2
Video Surveillance Monitoring
and Supervisory Interfaces
3
B.
1.5
Performance Requirements
1. The monitors shall be high-resolution color LCD monitors for use with analog
video, digital video recorders and with PC applications.
2. The monitors shall be available either as 8.4-inch and 10.4-inch viewable
picture area LCD monitors.
3. The monitors shall offer a long-life fluorescent backlight.
4. The monitors shall feature standard 75 mm mounting holes to accommodate a
range of VESA wall mounts.
5. The monitors shall offer a maximum brightness of 230 to 250 cd/m2.
6. The monitors shall have a 500:1 or a 600:1 maximum contrast ratio.
7. The monitors shall offer auto-ranging power supplies with 100/240 VAC, 50/60
Hz.
8. The monitors shall offer two composite BNC inputs and loop-through outputs.
9. The monitors shall offer an analog VGA input.
10. The monitors shall offer a trigger and an auto switch feature.
SUBMITTALS
A.
Submit under provisions of Section [01 33 00].
B.
Product Data:
1. Manufacturer’s data, user and installation manuals for all equipment and
software programs including computer equipment and other equipment required
for complete video management system.
C. Shop Drawings; include:
1. System device locations on architectural floor plans.
2. Full Schematic of system, including wiring information for all devices.
D. Closeout Submittals:
1. User manual.
2. Parts list.
3. System device locations on architectural floor plans.
4. Wiring and connection diagram.
5. Maintenance requirements.
1.6
QUALITY ASSURANCE
A.
Manufacturer:
1. Minimum of [10] years experience in manufacture and design Video
Surveillance Devices.
2. Manufacturer’s quality system: Registered to ISO 9001 Quality Standard.
B.
Video Surveillance System:
1. Listed by [UL] [EN] [FCC] specifically for the required loads. Provide evidence
of compliance upon request.
C. Installer:
1. Minimum of [5] years experience installing Video Surveillance System.
Project Name/Project #/2-12-16
28 23 16- 3
Video Surveillance Monitoring
and Supervisory Interfaces
4
1.7
DELIVERY, STORAGE AND HANDLING
A.
Comply with requirements of Section [01 60 00].
B.
Deliver materials in manufacture’s original, unopened, undamaged containers; and
unharmed original identification labels.
C. Protect store materials from environmental and temperature conditions following
manufacturer’s instructions.
D. Handle and operate products and systems according to manufacturer’s instructions.
E.
1.8
Bosch provides off-the-shelf availability for our top selling products and same-day or
24-hour shipping.
WARRANTY
A.
1.9
Provide manufacturer’s warranty covering [3] years for replacement and repair of
defective equipment.
MAINTENANCE
A.
Make ordering of new equipment for expansions, replacements, and spare parts
available to dealers and end users.
B.
Provide factory direct technical support from 8:00 a.m. to 8:00 p.m. via phone and email.
Project Name/Project #/2-12-16
28 23 16- 4
Video Surveillance Monitoring
and Supervisory Interfaces
5
PART 2 – PRODUCTS
2.1
MANUFACTURERS
A.
Acceptable Manufacturer:
[Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 1450, USA
Phone: + 1 800 289 0096
Fax: + 1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us]
[Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com]
[Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: +65 6319 3450
Fax: +65 6319 3499
apr.securitysystems@bosch.com
www.boschsecurity.com]
B.
Substitutions: [Not permitted.] [Under provisions of Division 1.]
1. [All proposed substitutions must be approved by the Architect or Engineer
professional.]
2. [Proposed substitutions must provide a line-by-line compliance documentation.]
**********Specifier’s note: Select monitor based on project requirement. The Bosch UML Series
of general purpose monitors contain two sizes (an 8.4-in. and a 10.4-in.); therefore you have a
choice of monitor for each application.
Project Name/Project #/2-12-16
28 23 16- 5
Video Surveillance Monitoring
and Supervisory Interfaces
6
2.2
BOSCH UML SERIES 8.4- AND 10.4-INCH GENERAL PURPOSE COLOR LCD FLAT
PANEL MONITORS [UML-080-90] [UML-100-90]
A.
General Requirements:
1. The monitors shall be high-resolution color LCD monitors for use with analog
video, digital video recorders and with PC applications.
2. The monitors shall be available either as 8.4-inch and 10.4-inch viewable
picture area LCD monitors.
3. The monitors shall offer a long-life fluorescent backlight.
4. The monitors shall feature standard 75 mm mounting holes to accommodate a
range of VESA wall mounts.
5. The monitors shall offer a maximum brightness of 230 to 250 cd/m2.
6. The monitors shall have a 500:1 or a 600:1 maximum contrast ratio.
7. The monitors shall offer auto-ranging power supplies with 100/240 VAC, 50/60
Hz.
8. The monitors shall offer two composite BNC inputs and loop-through outputs.
B.
Electrical:
1. [UML-080-90]:
a. Rated Voltage: 120 VAC, 60 Hz or 230 VAC, 50 Hz
b. Voltage Range: 100–240 VAC
c. Power at Rated Voltage: < 35 W
d. Sync. Format: PAL/NTSC
e. LCD Panel: TFT LCD
f. Active Display Area: 170.4 x 127.8 mm (6.7 x 5.0 in.)
g. Viewable Picture Area: 8.4 in. (213.4 mm) measured diagonally
h. Pixel Pitch: 0.213 x 0.213 mm (0.01 x 0.01 in.)
i. Resolution: 800 x 600 pixels
j. Frequency:
1) Horizontal: 31–48 KHz
2) Vertical: 56–75 Hz
k. Aspect Ratio: 4:3
l. Display Colors: 16.2 million
m. Response Time: 10 ms (typical)
n. Backlight: Cold cathode fluorescent tube, rated life 50,000 hours
2.
[UML-100-90]:
a. Rated Voltage: 120 VAC, 60 Hz or 230 VAC, 50 Hz
b. Voltage Range: 100–240 VAC
c. Power at Rated Voltage: < 35 W
d. Sync. Format: PAL/NTSC
e. LCD Panel: TFT LCD
f. Active Display Area: 211.2 x 158.4 mm (8.3 x 5.2 in.)
g. Viewable Picture Area: 10.4 in. (264.2 mm) measured diagonally
h. Pixel Pitch: 0.264 x 0.264 mm (0.01 x 0.01 in.)
i. Resolution: 800 x 600 pixels
j. Frequency:
1) Horizontal: 31–48 KHz
2) Vertical: 56–75 Hz
k. Display Colors: 16.2 million
l. Response Time: 20 ms (typical)
m. Rated Life: Cold cathode fluorescent tube, rated life 50,000 hours
Project Name/Project #/2-12-16
28 23 16- 6
Video Surveillance Monitoring
and Supervisory Interfaces
7
C. LCD Panel Optical Characteristics
1. [UML-080-90]
a. Luminance: 250 cd/m2 typical
b. Contrast Ratio: 600:1 typical
c. Viewing Angle (H x V): 160° x 140°
2. [UML-100-90]
a. Luminance: 230 cd/m2 typical
b. Contrast Ratio: 500:1 typical
c. Viewing Angle (H x V): 160° x 140°
D. Video Input
1. BNC: 1.0 Vp-p , 75 Ω termination loop-through output
2. Y/C (S-video): 0.7 Vp-p (Y-signal), 0.3 Vp-p (C-signal), 75 Ω termination
E.
PC Input
1. VGA: XGA supported
F.
PC Timing Modes
1. [UML-080-90]
a. 640 x 480: 60/72/75 Hz
b. 800 x 600: 60/72/75 Hz
c. 1024 x 768: 60/70/75 Hz
2. [UML-100-90]
a. 640 x 480: 60/72/75 Hz
b. 800 x 600: 60/72/75 Hz
c. 1024 x 768: 60/72/75 Hz
G. Controls:
1. Front Panel: Push-buttons
2. Input: Selects: Video1, Video2, S-video, VGA
3. Menu: Selects on-screen display (OSD), up cursor, down cursor/auto adjust,
left cursor, right cursor
4. Power: On/Off
H. Connectors:
1. Video 1 (AV1): Composite video: two (2) BNC (1 in, 1 out)
2. Video 2 (AV2): Composite video: two (2) BNC (1 in, 1 out)
3. VGA: One (1) RGB 15-pin D-sub in
4. Y/C (S-video): Mini-DIN, 4-pin one (1) channel input
5. Audio In: Two (2) RCA (1 left, 1 right)
6. Trigger Input: One (1) 1/8 in. mini phono plug
7. RS-232: Port used for firmware updates
8. Power Input: 5.5 mm DC input jack
9. Power Adapter:
a. Input: 100–240 VAC, 50/60 Hz
b. Output: 12 VDC, 2.5 A
Project Name/Project #/2-12-16
28 23 16- 7
Video Surveillance Monitoring
and Supervisory Interfaces
8
2.3
I.
Mechanical:
1. Cabinet Material:
a. Front: Plastic
b. Rear: Metal
2. Finish: Textured
3. Mount: Wall mounting compatible with standard bracket, 75 mm (2.95 in.)
centers, M4 thread
4. LCD Dimensions (W x H x D):
a. [UML-080-90 219 x 184 x 32.5 mm (8.6 x 7.2 x 1.3 in.)]
b. [UML-100-90 256 x 225 x 32.5 mm (10.1 x 8.9 x 1.3 in.)]
5. Weight:
a. [UML-082-90: 1.16 kg (2.56 lb)]
b. [UML-102-90: 1.53 kg (3.37 lb)]
6.
J.
Environmental:
1. Operating Temperature: 0 to 45C (32 to 113F)
2. Storage Temperature: -20 to 60C (-4 to 140F)
3. Humidity: Maximum 93%
ACCESSORIES
A. Mounts
1. Rack Mount Bracket for LCD Monitors UMM-LCDUB-RM
PART 3 – EXECUTION
3.1
3.2
EXAMINATION
A.
Examine areas to receive devices and notify adverse conditions affecting installation
or subsequent operation.
B.
Do not begin installation until unacceptable conditions are corrected.
PREPARATION
A.
3.3
Protect devices from damage during construction.
INSTALLATION
A.
Install devices in accordance with manufacturer’s instruction at locations indicated
on the floor drawings plans.
B.
Perform installation with qualified service personnel.
C. Install devices in accordance with the National Electrical Code or applicable local
codes.
D. Ensure selected location is secure and offers protection from accidental damage.
Project Name/Project #/2-12-16
28 23 16- 8
Video Surveillance Monitoring
and Supervisory Interfaces
9
E.
3.4
Location must provide reasonable temperature and humidity conditions, free from
sources of electrical and electromagnetic interference.
FIELD QUALITY CONTROL
A.
Test snugness of mounting screws of all installed equipment.
B.
Test proper operation of all video system devices.
C. Determine and report all problems to the manufacturer’s customer service
department.
3.5
3.6
ADJUSTING
A.
Make proper adjustment to video system devices for correct operation in
accordance with manufacturer’s instructions.
B.
Make any adjustment of camera settings to comply with specific customer’s need.
DEMOSTRATION
A.
Demonstrate at final inspection that video management system and devices
functions properly.
END OF SECTION
Project Name/Project #/2-12-16
28 23 16- 9
Video Surveillance Monitoring
and Supervisory Interfaces