Tidol
corporation
120-2A McLevin Avenue Scarborough ONTARIO MIB 3E9
TEL: 416-293-2244
FAX: 416-293-5808
http://www.tidolcorp.com
sales@tidolcorp.com
RINSOL 4040
FOAMING CHLORINATED ALKALINE DETERGENT
RINSOL 4040 is a liquid chlorinated detergent cleaner for cleaning and sanitising dairy, meat and
food processing equipments and plants. Used according to label and rinsed thoroughly with potable
water, it will leave no contamination of food products.
It contains an alkali, an alkaline builder and Potassium hypochlorite.
BENEFITS
1. It is a liquid therefore easy to use.
2. It is chlorinated removes proteins, blood and other soils effectively.
3. Rapid rinsing.
4. Contains water softeners for hard water tolerance.
5. Registered with Agriculture Canada, therefore no objection from Inspection personnel.
6. Contains Chlorine sanitizer and Quat sanitizer.
TECHNICAL DATA
1.
2.
3.
4.
5.
6.
7.
8.
Surfactant system: Amphoteric-Cationic system
Total solids: 42
pH neat:14 @ 1% solution pH 12
Foam height: > 900ml for 1% solution
Specific gravity: 1.19
Colour : Faint yellowish-Water clear
Odour: Neutral- when diluted below pH 11- Mild chlorine
Effluent water treatment: Dilute to a pH of between 6-8 and dispose through sanitary sewer.
DESCRIPTION
RINSOL 4040 is highly versatile value added product for use in modern dairy, meat and food
processing plants. Though essentially developed and approved for use in automated CIP systems, it
can be used for other cleaning and sterilising purposes.
RINSOL 4040 cleaner penetrates, loosens and removes heavy residues such as protein. The
chlorine helps to rapidly clean and sanitise areas that are difficult to reach. The chlorine liberated
may also act as" vapor phase cleaner”.
RINSOL 4040 also may be used for bakery liquid fermentation cleaning systems. It is also suitable
for spray washing of egg shell and as a general purpose cleaner and sanitizer.
PRECAUTIONS:
All chlorinated alkalis are strong detergents; care must be taken to protect the personnel and
vulnerable surfaces. It is safe on stainless steel but will corrode cold rolled steel and other soft
metals. Please refer material safety data sheet before using.
DIRECTIONS
1. CIP AND PRESSURE CLEANING
Rinse equipment immediately after use, circulate RINSOL 4040 at a concentration of 3-5 ml per
Litre of water or 1/2-1 oz per imperial gallon of water at a temperature of 50-70*C for 10 to 20
minutes. RINSE WITH POTABLE WATER. Sanitise with RINSOL 1500, if necessary and
feasible.
2. ACID-ALKALI cleaning (HTST circulation cleaning)
Circulate RINSOL 4040 at the rate of 10-16ml per litre of water or 2-21/2 ozs per imperial gallon of
water at 70-80oC for about 1 hour. Rinse with cold water till the pH returns to normal. Sanitise with
RINSOL 1500, if necessary.
3. BLF system cleaning (Bakery Liquid Fermentation System cleaning)
Rinse equipment soon after use, if possible manually clean tanks. Circulate RINSOL 4040 at 1016 ml per litre of water or 2-21/2 ozs per imperial gallon of water at a temperature of 75*C of about
30 minutes. Rinse with cold water till pH returns to normal. Use RINSOL 1500 to sanitise the
system.
4. FOAM cleaning
Rinse thoroughly with potable water, prepare foaming solution by mixing 1 part of RINSOL 4040
with 15 parts of water . Apply through a foaming system to cover the entire area to be cleaned.
Allow about 10 minutes and rinse with potable water till pH returns to normal.
Apply product from bottom-up , wash from bottom-up and final rinse from top -down.
Apply suitable sanitizer and let air dry.
5. EGG Washing
Mix about 5-10 ml of RINSOL 4040 with 1 litre of water or 1-2 ozs with one imperial gallon of
water at 50oC wash eggs in the solution and change every 3 to 4 hours or as required by the
inspector.
6. PRESSURE WASHING
As a general purpose cleaner and sanitise dilute 1 part of RINSOL 4040 with 30 to 100 parts of
warm water and spray wash the whole plant once a week to reduce the bacterial population. Rinse
well and sanitise with RINSOL 1500 by preparing 200ppm solution apply and let air dry.
All information, recommendations and suggestions appearing in this literature concerning the use of the product are based upon tests
and data believed to be reliable, however, it is the user's responsibility to determine the suitability for their own use of the product
described herein and complying to all applicable statutes.