Tidol
corporation
120-2A McLevin Avenue Scarborough ONTARIO MIB 3E9
TEL: 416-293-2244
FAX: 416-293-5808
http://www.tidolcorp.com
sales@tidolcorp.com
PRODUCT PROFILE
RINSOL 4000
FORMULA 200213
LOW FOAMING CHLORINATED ALKALINE DETERGENT
CONCENTRATE
REGISTRATIONS FILE NO: 3100-3/T085
Food Production and Inspection Branch
Agriculture Canada.
18/03/93
RINSOL 4000 is a liquid chlorinated detergent cleaner for cleaning and sanitising dairy, meat and
food processing equipments and plants. Used according to label and rinsed thoroughly with potable
water, it will leave no contamination of food products.
It contains an alkali, an alkaline builder and sodium hypochlorite.
BENEFITS
1. It is a liquid therefore easy to use.
2. It is chlorinated removes proteins, bllod and other soils effectively.
3. Low foaming, improves rinsing, prevents air pockets.
4. Contains water softeners for hard water tolerance.
5. Registered with Agriculture Canada, therefore no objection from Inspection personnel.
DESCRIPTION
RINSOL 4000 is highly versatile value added product for use in modern dairy, meat and food
processing plants. Though essentially developed and approved for use in automated CIP systems, it
can be used for other cleaning and sterilising purposes.
RINSOL 4000 cleaner penetrates, loosens and removes heavy residues such as protein. The
chlorine helps to rapidly clean and sanitise areas that are difficult to reach. The chlorine liberated
may also act as" vapor phase cleaner”. Since it is low foaming it rinses rapidly and prevents air
pocket build up.
RINSOL 4000 also may be used for bakery liquid fermentation cleaning systems. It is also suitable
for spray washing of egg shell and as a general purpose cleaner and sanitizer.
PRECAUTIONS:
All chlorinated alkalis are strong detergents; care must be taken to protect the personnel and
vulnerable surfaces. It is safe on stainless steel but will corrode cold rolled steel and other soft
metals. Please refer material safety data sheet before using.
DIRECTIONS
1. CIP AND PRESSURE CLEANING
Rinse equipment immediately after use, circulate RINSOL 4000 at a concentration of 3-5 Ml per
Litre of water or 1/2-1 oz per imperial gallon of water at a temperature of 50-70*C for 10 to 20
minutes. RINSE WITH POTABLE WATER. Sanitise with RINSOL 1500 if necessary and
feasible.
2. ACID-ALKALI cleaning (HTST circulation cleaning)
Rinse equipment soon after use, circulate RINSOL 3000 as recommended at about 75*C for about
20-40 minutes, rinse with warm water until the pH of water returns to normal (pH7.00 +0.5).
Circulate RINSOL 4000 at the rate of 10-16ml per litre of water or 2-21/2 ozs per imperial gallon of
water at 70-80*C for about 1 hour. Rinse with cold water till the pH returns to normal. Sanitise
with RINSOL 1500 if necessary.
3. BLF system cleaning (Bakery Liquid Fermentation System cleaning)
Rinse equipment soon after use, if possible manually clean tanks. Circulate RINSOL 4000 at 1016 ml per litre of water or 2-21/2 ozs per imperial gallon of water at a temperature of 75*C of about
30 minutes. Rinse with cold water till pH returns to normal. Use RINSOL 1500 to sanitise the
system.
4. FOAM cleaning
Rinse thoroughly with potable water, prepare foaming solution by mixing 1 part of RINSOL 4000
with 1 part of RINSOL 2000 foaming agent. Mix 30-60 Ml of mixture with 1 litre of water or 5-10
ozs of mixture with water and apply through a foam gun. Allow about 10 minutes and rinse with
potable water till pH returns to normal.
5. EGG Washing
Mix about 5-10 ml of RINSOL 4000 with 1 litre of water or 1-2 ozs with one imperial gallon of
water at 50*C wash eggs in the solution and change every 3 to 4 hours or as required by the
inspector.
6. PRESSURE WASHING
As a general purpose cleaner and sanitise dilute 1 part of RINSOL 4000 with 30 to 100 parts of
warm water and spray wash the whole plant once a week to reduce the bacterial population. Rinse
well and sanitise with RINSOL 1500 by preparing 200ppm solution apply and let air dry.
DATA
Builder system: Potassium pyrophosphate-potassium Hydroxide
Chlorine system: Sodium Hypochlorite
Specific Gravity: 1.25-1.30
Refract meter reading: 43.00-45.00
pH of conc.:13.50+0.50
pH of 1% :12.50+0.50
TESTING PROCEDURE
Standard laboratory titration to estimate the amount of available alkali using sulphuric acid and
Phenolphthalein indicator, Color Change from Pink to Colourless.
AVAILABILITY
1.4*4L case
2.23L pail
3.210L polydrum
4.1125 tote tank
Bulk orders please call customer service.
____________________________________________________________
All information, recommendations and suggestions appearing in this literature concerning the use of the product are
based upon tests and data believed to be reliable, however, it is the user's responsibility to determine the suitability for
their own use of the product described herein and complying to all applicable statutes.