120, de Naples, St-Augustin de Desmaures
Québec, Canada
Tel : 418.878.4116 or 1.800.661.6316
Fax : 418.878.1595
Email : sales@globaltardif.com
*Hydraulic or Traction package or sub-components *Entrances *Cabs *Handicap or Residential Lift *DBW public or residential *GEPC Elevator Parts Center
CAB Estimate Take off
Estimate # : _____________
Customer: ______________________________ Attention of :_______________________________
Job Name : ___________________________________________________
DATA
Passenger
Passenger / Service
Observation
Code
ANSI
Specifications
Cab Drawing / sketch :
Platform Size :
Door Size :
B44 Canada
:
Yes
No
(w) x
(d)
________x ________
Yes
Location : ____________________________________
CEN Other : ___________________
Arch. Drawing :
Yes
No
Capacity : ____________
No
Car # : _____________
8’-0
Cab Height :
Type : SSP
C.C : _____________________________
8’-6’’
2SP
3SP
CO
16 G.
14 G. – Made of
9’-0’’
CO/ 2SP
9’-6’’
10’-0’’
or : _________0____
Opening @
Type of Door operator - By Others :

SHELL Model

Cab Front :

Cab Transom
:
Projecting

Cab doors
:
Stainless

If Observation :
DS1
DS3
DF112Y ( St/stl satin )
Shell :
DF113Y ( St/st mirror )
Flush
Bronze -
Cab Front Return :
Finish :
# 4 or
Cab Canopy

Sound deadening :

Fan :

Car Sill - By
1 Speed
Steel Painted
DF 14Y ( Muntz satin)
Stainless # 4
5WL – or : _________________
Rigid Tek
DF114Y ( Muntz mirror ) - Or :_____________________
Swing
# 8 Mirror -
Applied
w/ Sound deadening
Quantity : _______
Cut out only
- Other : ___________________________
Exposed to direct Sun – must provide auxiliary battery operated fan
Exposed to direct sun – Air cooling system provided.
Exposed to weather – must provide weather strips
Glass Back – Aluminum extrusion framing , clear anodized
Top Hat : Height:___________ Emergency Exit –


DS2
Sprayed - Insulmat
2 Speed ( std Nylube )
Us
Others -
Emergency lignts
Cab steadier

Protective Pads

Car Top & Bottom Shrouding :
Walls only
Wall finish
Typical Hang on Panels :
Typical Vertical panels or
locking device -
Side Em. Exit w/ contact
5 Pin lock
Bronze
Nickel
3 Speed Morrisson AA
Triangular
Stainless
Steel
Crosshead Mounting
Require Extension up to front return
Without exposed screws
Bolted duct on canopy
Front Also with cut-out
Pad Hooks :
Std – Aluminium
Brass
Stainless
Not required , by Others
Plastic laminate ( Our std –WilsonHart selection)
Horizontal
Stainless steel #4 reveals or
Patterned stainless
Glass / Mrror
c/w Binder around - Finish : ___________________
Vertical wood panels faced and edged
Special wood
Standard wood
Wrapped w/ Fabric
Black painted
Mirror above Handrails – Color or mirror : ______________
Book match & Sequence match
Special ( Please describe) :
116096041
9/16’’
World class Sound deadening - Foam type
2 Speed Morrisson AA
Alum
Top w/ contact
¼’’ or
Page
1 of 2

Handrails - Quantity : ____
DH154 tubular
DH51 (FF14) flat bar
DH51 (FF38) flat bar
DH51 (FF12) flat bar
St/st
St/st
St/st
St/st
Bumper rails - Quantity : ____
1 ½’’
2’’
2’’
2’’
Bronze
Bronze
Bronze
Bronze
DH 153 red Oak
2’’x 4’’
2’’ x 6’’
Continuous in Corner
Turned end
2’’
4’’
4’’
4’’
2 ½’’
6’’
6’’
6’’
3’’
8’’
8’’
8’’
DH154 tubular
DH51 (FF14)
DH51 (FF38)
DH51 (FF12)
2’’ x 8’’
or
or
or
or
Bronze
Bronze
Bronze
Bronze
DH 153 red Oak
2’’x 6’’
2’’ x 8’’
Continuous in Corner
Turned end
or : ____________________________________________

St/st
St/st
St/st
St/st
1 ½’’
2’’
2’’
2’’
2’’
4’’
4’’
4’’
2’’ x 10’’
2 ½’’
6’’
6’’
6’’
3’’
8’’
8’’
8’’
2’’ x 12’’
or : ____________________________________________
Suspended Ceiling & Lighting
DC22L Lexan Translucid panels
DA120
DC126 Baked enamel flat w/ fan
DC22E Eggcrate ½’’ white w/ alum. Perimeter frame
DC23
6 Pots lights ceiling
DC125 24 Pots lights ceiling
DC33
9 Pots lights ceiling
DC124 Perimeter fluorescent faced w/
w/ dimmer
Stainless
Stainless
Stainless
Stainless
DC29
w/out lights canopy
DC22D
Bronze Bronze Bronze Bronze -
Finish :
Finish :
Finish :
Finish :
#4
#4
#4
#4
# 8 Mirror
# 8 Mirror
# 8 Mirror
# 8 Mirror
or
or
or
or
:_________
:_________
:_________
:_________
Custom :
Basic cost
: $____________________ Each
Extra for Crating
: $ ___________________ Each
*** For the total cost per cab
: $_____________Each Cab -
US Dollars
Cdn Dollars
*** Leed time may vary depending of work load at time of ordering.
*** Our approval lead time for drawings will begin after receipt of the information requested and resolution of all open issues identified in our review.
*** If Swing return are required ; Otis must send the complete Dummy panels to us 3 weeks minimum prior shipment. Also, the Dummy Panels
interfacing drawings must be send to us minimum 6 weeks prior shipment .
*** Lacquer finish on bronze or brass is included as a standard.
*** Erector’s notes and drawings included.



Price Valid for 90 Days - * Lead Time for Drawings :____________ weeks - * Lead Time
Manufacturing :____________weeks
FOB Our Plant
Quebec
Toronto
or
Job Site - Location :__________________________________
Extra of $ :______________
Transport :
Included
Collect
Prepaid & Charge
Third Party Billing
Approval Dwgs on CAD
- Sheet
11’’ x 17’’
Crating Included
24 x 36 -
Quantity of copy :_____
Crating NOT Included - Extra of $ ______________
Ship Date no later than : ______________________
Approximate Cab Weight is : _____________lbs +/- 150 lbs
Note :
BY : ___
DATE :
Specialist since 20 years :



116096041
Hydraulic and Traction « geared » or « gearless »
Cabs : Architectural - Observation - Custom or standard
Handicap and Residential elevator - LULA



Light & Heavy Duty FREIGHT - Hydraulic or Traction
All size and model of Entrances UL & ULC
Dumbwaiters Commercial or residential
Page
2 of 2

116096041
G.E.P.C. – Global Elevator Part Center

HYDROTECH - Cylinder manufacturer and power unit - submersible & Dry
Page
3 of 2