Epoxy Primer A - Macleod Paints

advertisement
MATERIAL SAFETY DATA SHEET
MACLEODS PAINTS P/L
Page 1 of 4
Issued July 2009
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS ACCORDING TO WORKSAFE CRITERIA
EPOXY PRIMER BASE ‘A’
INDENTIFICATION
PRODUCT NAME Epoxy primer“a”RESIN
OTHER NAMES none
UN NUMBER 1263
DG CLASS 3.2
PACKING GROUP 3
HAZCHEM CODE 3 (Y) E
POISON SCHEDULE S5
CHEMICAL FAMILY- Epoxy Primer A is an epoxy resin base
which is part of a two part solvent based coating. This material when
mixed with part B in the 4:1 ratio of A to B by volume may be
applied by roller, brush or spray. Being a primer coating for
properly prepared concrete, steel and masonry. It is suitable for food
processing plants, factories and swimming pools.
PHYSICAL APPEARANCE
APPEARANCE A viscous flammable clear liquid with a strong
odour.
MELTING POINT Liquid at normal temperatures
BOILING POINT 145- 170C
FLASHPOINT 28 C
SPECIFIC GRAVITY 1.16
SOLUBILITY IN WATER not soluble
CORROSIVE not corrosive
INGREDIENTS
Epoxy resin
Xylene
Methyl iso Butyl Ketone
Ethylene glycol mono
Butyl ether
Solvesso 150
30 – 60%
10 – 30%
<10%
<10%
<10%
<10 – 30%
1
Epoxy Primer
MATERIAL SAFETY DATA SHEET
Macleods Paints p/l
Page 2 of 4
Issued July 2009
Hazardous according to Worksafe Criteria
HEALTH DATA
No specific data is available for this product for chronic exposure symptoms.
The ingredients are not listed as carcinogenic in Worksafe’s document
“Exposure Standards for Atmospheric Contaminates in the Occupational
Environment 1995”This material contains atleast one ingredient classified by the
manufacturer as a potential skin sensitiser. Exposure to a sensitiser, once
sensitisation has occurred, may manifest itself as a skin rash or inflammation.
ACUTE AFFECTS
Swallowed – Maybe harmful if swallowed. Highly toxic, may cause irritation to
mouth, throat and stomach.
Eyes – This product is irritating to the eyes. It will cause discomfort such as
stinging pain, watering and redness of the eyes. Effects may last after exposure
has ceased. High concentrations of vapour will cause irritation
Skin- This product is irritating to skin. It is likely to cause discomfort and effects
such as moderate to server itchiness, blistering and skin reddening. Tests have
shown this product to be a skin sensitiser.
Inhalation – Data indicates that this product may be irritating if inhaled. May
lead to minor discomfort, which should quickly disappear once exposure has
ceased.
FIRST AID
Safety deluge showers should be provided where this product is being used.
If poisoning occurs contact a Doctor or Poisons Information Centre
If swallowed do NOT induce vomiting. Give glass of water.
Eyes – If the product comes in contact with the eyes, hold open and wash with
running water for at least 15 minutes. Seek medical advice
Skin – If product gets on skin, immediately remove contaminated clothing and
wash skin with soap and water. If irritation persists seek medical attention.
Inhalation – No first aid measures normally required. However, if mists or dust
has been inhaled, and irritation has developed, remove to fresh air and observe.
If after 30 minutes, irritation continues seek medical advice.
Advice to Doctor- Treat symptomatically. However note the sensitive nature of
this product, observe for signs of sensitisation.
2
Epoxy Primer A
MATERIAL SAFETY DATA SHEET Page 3 of 4
Macleods Paints P/L Issued July 2009
Hazardous according to Worksafe Criteria
PRECAUTIONS FOR USE
May cause sensitisation by skin contact. Irritating to eyes and skin
Exposure standards
There is a blanket limit of 10mg/m3 for dusts or mists for this product. The
nature of this product makes it unlikely that this level will be approached in
normal use.
Personal protection
Respiratory – If this product is being used in dusty or confined conditions, use of
a mask or respirator may be preferred.
Skin protection- impermeable protective gloves should be worn when using this
product. Failure to do so may lead to skin irritation.
Eye protection – Protective eyewear should be worn when using this product, eye
contact may prove painful and dangerous and should be avoided.
Clothing- This product is essentially safe without special protective clothing.
However its use is recommended as a good industrial practice.
Safety boots- Wearing safety boots in industrial situations is advisory.
Always wash hands before smoking, eating or using the toilet. Wash
contaminated clothing and protective equipment before re using.
Spills and Disposal
Prevent contamination of drains and watercourses. Clean up spills with sand,
vermiculite or similar material and dispose of in approved landfill.
FIRE HAZARD
Fire hazard and decomposes on heat emitting toxic and noxious fumes.
Use dry chemical powder , CO2 or foam, use water jet to keep containers cool
and evacuate immediate area. Fire-fighters to wear self contained breathing
apparatus if risk of exposure to products of decomposition. Vapours are heavier
than air and may travel along the ground, gathering in depressions, risking
oxygen deficiency.
WORKSAFE CLASSIFICATION
HAZARD CATEGORY
Epoxy Primer A is classified as hazardous
RISK PHRASES
Highly flammable
Harmful by inhalation and contact with skin
Irritating to eyes,respiratory tract and skin
SAFETY PHRASES
Keep away from heat and sources of ignitions – no smoking
Do not breath vapours or spray mist
Avoid contact with skin and eyes
Wear suitable protective clothing , gloves and eye/ face protection
3
Epoxy primer A
MATERIAL SAFETY DATA SHEET
Macleods Paints p/l
Page 4 of 4
Issued July 2009
HAZARDOUS ACCORDING TO WORKSAFE CRITERIA
ENVIRONMENT
May be hazardous to the environment. Avoid contaminating waterways and sewage. Do not
empty into drains.
This MSDS summarises our best knowledge of the health and safety hazard information of this
product and how to safely handle and use of this product in the workplace. It is believed to be
correct at time of printing.
Prepared by: Peter Funnell
MACLEOD PAINTS P/L
7/21 Malvern Road
Bayswater Vic 3153
PH 03 9729 7100
ISSUED: July 2009
4
Download