MOD List ’01 M coupe (08-20-04)
3.46 Differential from Z3-3.0 (Torsen style).
Sport mode (not necessary with Conforti software).
Conforti software.
Supersprint exhaust with DTM tips (modified mounting bracket).
Euro front floating rotors.
Repco deluxe brake pads all around.
Koni SA front and rear shocks with modified plugged top caps.
Shortened (15/16”) from above M-Z3 shift lever.
Press fit/hand reamed Delrin AF (Teflon content) shift lever bushing.
Press fit/hand reamed Delrin shifting arm bushings.
Press fit/hand reamed Delrin AF (Teflon content) brake pedal bushings.
Press fit/hand reamed Delrin AF (Teflon content) clutch pedal bushings.
My adjustable clutch stop.
Skaggs aluminum clutch, brake and gas pedal.
My dead pedal.
Underbody panel removed.
Left and right knee bolsters removed.
Glove box door bolster removed.
Windshield washer jug and associated parts removed.
Under hood panel removed.
BMW 12 inch logo underside of hood. Paint/clear coat underside of hood.
Interstate MTP-91 battery installed.
RSM modified Z3 reinforcement plates.
Xenon headlights.
M Power engraved air box cover.
315 HP engraved radiator top plate.
10W60/5.5L engraved oil filler cap.
Mud flaps front and rear.
Coupe logo on door sills.
///M logo (Small side gill one) installed forward of radiator.
Non M side gills with Z4 like running/repeater lights.
Non M mirrors with convex (wide angle) Euro mirror glass (no warning
message).
///M rear logo removed.
License plate mount assembly rubber screws replaced with rivet nuts.
License plate white screw caps.
Trunk lock rod fix.
Deleted trunk wiper assembly.
BMW 1 liter oil bag.
Jack.
Wheel Chock (mounted in engine compartment).
Lug bolt wrench.
Tire repair kit.
E46 space saver spare tire.
Warning triangle (mounted in mobility kit area).
First aid kit (mounted in mobility kit area).
Changer access chrome door knob.
Traffic Pro CD/NAV head unit.
Added drivers side grab handle.
Glove box light.
Glove box seams heat glued.
Glove box felt lined inside and back.
Foot well lights.
Interior door handle lights.
Exterior door handle locator lights (7 series like) On the to do list.
Lower door puddle lights.
Interior light accent lights.
Non chrome ringed rear self dimming rear view mirror.
Mirror alarm LED.
Door pins alarm LED.
4 button remote Avital alarm with shock sensor.
Alarm flashes repeater lights with arm or disarm.
Replaced gray console gauges with black oil temperature, voltmeter and OBC.
Passenger side console OBC switch.
Interior light console switch.
Rear fogs (with doubled up brake lights).
Custom mounted V1 radar detector .
V1 remote.
V1 remote switching & mute controlled with window washer front & rear stalk
switch.
A-pillar chrome ringed oil pressure gauge.
Variable RPM shift light using wide angle LED mounted in A-pillar gauge mount
(LED dims with parking lights on).
LED used for oil pressure sender check and oil pressure loss along with
gong.
Same LED and gong used for speed alarm set (speed set remembered).
Doors lock with engine start.
Doors lock at 5 MPH.
Skunk switch opens or closes sunroof and windows together. Sunroof can be
operated separate from windows. Eliminates need for upper sunroof switch.
Above sunroof switch now controls left and right garage doors.
Stealth integrated hands free cell phone. Sound comes through Traffic Pro head
unit. Microphone mounted in BMW microphone plate assembly.
Locking car with remote, closes windows and sunroof or just windows (full or
partial. Sunroof can be opened after lock sequence. Sunroof can be opened with
fan on speed two (up to 30 minutes) after lock sequence.
Unlocking car with remote, leaves windows and sunroof as they are or opens
windows and sunroof if closed.
Sunroof glass removable.
Custom case to hold glass when removed.
Body colored upper spoiler.
Body colored door handles and surrounds.
Drivers handle engraved with M coupe.
Passenger side engraved with S54.
Deleted side fender repeater lights.
Deleted front bumper lights, tow hook, license plate and Euro plate holes.
Deleted hood washer nozzles and BMW logo
Deleted passenger side wiper.
Old style windshield lower trim piece. (cleaner look)
Keyholes deleted from door handle surrounds.
Unlock switch added in trunk area.
Unlock (doors) with trunk key on the to do list.
Console lock switch added.
Cigar lighter moved to passenger side of console.
Power access added in trunk area.
Custom rubber trunk mat.
BMW hold down straps added in trunk area.
BMW storage net added in trunk area.
Z3 chrome letters added to oddments tray.
Custom leather covered tissue holder added to oddments tray storage area.
Storage net added behind passenger seat.
Owners manual storage added behind passenger seat.
Umbrella and mount added in place of passenger side storage net.
Drivers seat mounted BMW fire extinguisher.
Alcantra steering wheel.
Blue leather steering wheel tabs.
Blue leather shift boot.
Blue leather hockey sticks.
Black leather console armrest engraved with coupe.
Black leather door armrests.
Coupe logo added to door sills.
Chrome brake caliper clips.
Chrome dash upper air vent rings.
Chrome handbrake button.
Chrome interior door handles.
Chrome door lock pins.
Three M stripe colored illuminated shift knob.
Z3 solutions door pocket storage bags.
Deleted door pocket coin holder.
Round red reflector mounted on doors B pillar side.
Powder coated differential cover.
Powder coated differential output flange rings.
Powder coated calipers.
Powder coated X-brace.
Powder coated fuel filter cover.
Powder coated front shocks, springs and reinforcement plates. Rear on the to do
list.
Powder coated front sway bar and mounts. Rear on the to do list.
Powder coated Zenon ballast covers.
Powder coated thermostat housing .
Powder coated fan hub.
Powder coated custom radiator top plate.
Powder coated intake heat shield.
Powder coated exhaust heat shield.
Powder coated air regulator tube.
Brake disk edges high temperature painted in cast iron color.
Chrome differential cover mounting screws.
Chrome differential speed sensor plate and screws.
Chrome caliper clips.
Chrome oil filter lid.
Chrome oil line bracket.
Chrome air and fuel rail.
Chrome intake/throttle body clamps.
Chrome plated exhaust heat shield.
Chrome plated radiator tank cap.
Chrome diagnostic cover.
Chrome AC line port caps.
Chrome battery strut jump nut.
Chrome DME cover screws.
Chrome various Z8 nuts.
Chrome radiator spacer/screws.
Polished vanos cover. In progress.
Dual 3 LED array under hood lights.
Air horns.
Ooga horn.
Saab lug bolt caps.
Z3 floor mats.
Speedometer calibrated.
All stickers removed.
Drivers side seat 5/8” spacers at front of rails.
John Firestones main controller which does most of the trick electronic stuff. This
controller also includes a data logger (speed, rpm, distance and time).
John Firestones sport mode controller (Lights instrument cluster sport light, light
dims with parking lights, programmable to come up or not with engine start, or
can be disabled by holding sport switch down for 5 seconds).
Added accessory output with pulse or toggle after one or 5 seconds.
Dual fog light switch engraved with sport and aux.
John Firestones trunk light controller (shuts off light in 15 minutes).
Manually added interior light switch with John Firestones auto shutoff.
John Firestones auxiliary fan controller (automatically runs fan at low speed
based on engine run time on shut down or on demand).
John Firestones lane change signal light controller.
Engine fan with lower temp aux fan switch. Added switch for on
demand high speed.
Water temperature A-pillar gauge. Custom sender mount in stock drain plug.
Carbon fiber sunroof glass replacement on the to do list.
Deleted rear plate lights in progress.
Polished stock wheels with painted centers in progress.
Coupe decal under tachometer ///M on the to do list.
Alcantra center seat area on the to do list.
Multi function stalk switches on the to do list.
Valet mode controller on the to do list.
Roof antenna: combination radio, phone and GPS on the to do list.
Black faced instrument cluster on the to do list.
Some unmentionable mods done and on the to do list.