If interested in any of these positions please contact:
Robert Greene
Senior Software Engineer
Benetel Limited,
Guinness Enterprise Centre,
Taylor’s Lane,
Dublin 8,
Ireland.
Phone: +35314100619
Email: robertgreene@benetel.com
Graduate Software Engineer
The candidate must have knowledge and interest in developing software for embedded systems but
also the capability to develop software for desktop applications. A background in software with
some knowledge of electronics and embedded systems is preferred.
Duties
- Software development for a variety of CPU architectures, for a wide range of applications
- Development of applications to assist with automated testing of embedded systems
- Documentation and review of software
- Debug of embedded software using both software and hardware tools
- Required
- Advanced familiarity of one or more of the following programming languages: C/C++, Java,
Python
- Excellent knowledge of software design principles and techniques
- Familiarity with embedded software for microcontrollers or embedded systems
- Good practical knowledge of networking principles
- Experience with electronics, in particular digital and baseband circuitry
- Desirable, but not essential
- Experience with MySQL or a similar RDBM technology
- Experience using and programming for Linux; also BASH scripting
- Experience of different processor architectures (x86, PowerPC, ARM)
- Experience with National Instruments LabVIEW and TestStand
- Experience automating tasks through the use of programming or scripting
- Qualities
- Excellent communication skills
- Superb team-working skills
- Outstanding time management skills
- Self-motivated
- Quick learner
- Excellent problem-solver
==================================================================================
Graduate RF Engineer
The candidate is responsible for the design and development of RF printed circuit boards and
systems. A background in electronic circuit design with some knowledge of radio frequency (RF)
design is preferred.
Duties
- RF Circuit & System Performance Simulation and Optimisation
- Generation of design documentation including product specifications, design descriptions
and test specifications.
- RF Circuit Design including functional blocks such as Low Noise Amplifiers, High Power
Amplifiers, Oscillators and Synthesisers, RF filters, Modulators and Demodulators.
- Device Evaluation, Schematic Entry, PCB Layout support and review
- Design Validation Testing, Issue investigation and resolution
- Required
- Familiarity with PCB layout tools and techniques
- Proficient in analog circuit design
- Knowledge of ADC, DAC and DSP fundamentals
- Knowledge of RF Circuit and System design fundamentals
- Knowledge of RF measurements using equipment such as network, spectrum and signal
analysers
- Desireable, but not essential
- Detailed knowledge of RF system analysis calculations including Gain, Noise, Figure and
Linearality
- Competence in RF circuit and system simulation
- Competence in electromagnetic system simulation
- Qualities
- Excellent communication skills
- Superb team-working skills
- Outstanding time management skills
- Self-motivated
- Quick learner
- Excellent problem-solver
==================================================================================
PCB Layout Technician
The candidate is responsible for the layout of both RF and digital printed circuit boards. A
background in electronics, with layout proficiency, is preferred.
Duties
- Layout of printed circuit boards using Altium and/or OrCAD
- Schematic entry
- High speed digital layout
- RF layout
- PCB stack-up calculations
- Design-For-Test and Design-For-Manufacture
- Components Library management
- Required
- Layout CAD experience and knowledge, preferrably with Altium
- Qualities
- Excellent communication skills
- Superb team-working skills
- Outstanding time management skills
- Self-motivated
- Quick learner
- Excellent problem-solver
==================================================================================
Hardware Design Engineer
The candidate is responsible for the design of high speed digital circuitry as part of designing RF
enabled products. A background in electronic circuit design, logic design and with some knowledge
of radio frequency (RF) design is preferred.
Duties
- Design of PSU circuitry
- Design of high speed digital circuitry
- Integrating digital circuitry with existing and new RF designs
- Debugging digital, logic and analog circuitry
- Documenting existing and new designs
- Required
- PSU design
- Microcontroller integration and programming
- FPGA programming
- Digital circuitry design experience
- Spice Simulation
Desireable, but not essential
- VHDL or Verilog (preferrably VHDL)
- Microcontroller programming skills, including fluency in C/C++
- Communication protocol familiarity (e.g. SPI, I2C, UART, etc.)
- Qualities
- Excellent communication skills
- Superb team-working skills
- Outstanding time management skills
- Self-motivated
- Quick learner
- Excellent problem-solver