PJ TECH
METAL DETECTION
Northlands Business Park
New Market Rd., North Riding
Johannesburg, South Africa
Tel.: +27 (011) 704-7088 / 9
Fax: +27 (011) 704-7019
e-mail: smart@pjtech.co.za
www: www.pjtech.co.za
APPLICATION CHECK LIST
METAL DETECTOR
Quote Reference:
Customer:
Fax No/e-mail:
Tag No.:
End-User:
Date:
In order to evaluate the application and to ensure that any system subsequently purchased will be compatible with the application, certain
data is required. Please enter the data required on the sketch and questionnaire below.
PROBLEM METALS
Smallest size metal to be detected (mm)
X
X
mm
Metal Type (s)
PROCESS MATERIAL
PROCESSED MATERIAL:
Is material
Damp
Wet
Dry (Mark Choice)
Contains iron
What type
Conductive
Yes
No
(Mark Choice)
% Iron
Yes
No
(Mark Choice)
% Magnetite
GENERAL FACILITY INFORMATION
Equipment to be protected
Crusher Setting
Power supply available
220V AC
Is power regulated?
Yes
110V AC
No
Belt Width
(A)
mm
Trough Idler Angle
(B)
deg
Belt Rise
(Z)
mm
Idler Diameter
(D)
mm
Outer Frame Width
(E)
mm
Average Nominal Burden Depth (G)
mm
Lump Size
Distance between bottom of carry and return belt
50 Hz
(Mark Choice)
Belt Speed
mm
m/sec
Idler Spacing
(C)
mm
Inside Frame Width
(F)
mm
Total Height with Lumps
(H)
mm
Distance between top of frame and bottom of carry belt (I)
Belt Sag under full load
60 Hz
(Mark Choice)
mm
(J)
mm
Steel Core Belt
Yes
No
(Mark Choice)
Are metal splices or clips used?
Yes
No
(Mark Choice)
Page 1 of 2
mm
PJ TECH
METAL DETECTION
Northlands Business Park
New Market Rd., North Riding
Johannesburg, South Africa
Tel.: +27 (011) 704-7088 / 9
Fax: +27 (011) 704-7019
e-mail: smart@pjtech.co.za
www: www.pjtech.co.za
APPLICATION CHECK LIST
GENERAL FACILITY INFORMATION (continued)
Do flanges point like “X” or “Y”?
X
Y
Desired control unit location (left/right) when viewed in belt movement direction
Right
Portable Plant?
Yes
No
(Mark Choice)
Moved Frequently?
Yes
No
(Mark Choice)
Search Coils location?
Outdoors
Explosive area?
Yes
Control Enclosure location?
Outdoors
Indoors
No
Left
(Mark Choice)
(Mark Choice)
Indoors
(Mark Choice)
Cable length required between search coils and control enclosure
meters (7.5m standard)
SPECIAL REQUIREMENTS (e.g. marking device, remote reset, strobe light)
IDLER FOOT MOUNTING DETAILS (please fill in the measurements)
Foot with 2 bolts
Yes
Foot with 1 bolt
No
Yes
No
CONFIRMATION OF TECHNICAL DETAILS AS SET OUT ABOVE (requirement of ISO 9000/9001)
Print Name:
Designation:
Signature:
Date:
FOR OFFICE USE
Model purchased:
Spray marking purchased:
Clip detector purchased:
Additional requirements:
Page 2 of 2