Item DL 3155M12 Spec's Spec's with Sw DIODE APPLICATIONS MODULE - didactic equipment - circuits blocks: clipping circuit, clamping circuit, one half-wave voltage doubler, simple and double half-wave rectifier, diode bridge rectifier (Graetz bridge) with capacitive input filter, dual power supply, stabilized power supply theoretical topics: behaviour of the diode inserted in circuits that enclose generators of variable signals, simple and double clipper circuits, half-wave voltage doublers, simple half-wave rectifier circuit, double half-wave rectifier circuit, bridge rectifier circuit, power supplies, filters, regulators. Fault simulation. It must be possible to perform the following experiences: Clipping circuits, Clamping circuits, One half wave voltage doubler, The simple and double half-wave rectifier, Diode bridge rectifier (Graetz bridge) with capacitive input filter, Dual power supply, Stabilized power supply. The faults must be inserted by microswitches mounted on the board; the module must be provided with a EISA BUS 31+18 INTERFACE, connections and test points by 2mm terminals. Dimensions of the module: 297x260mm. The module must be supplied with a theoretical and practical manual. DIODE APPLICATIONS MODULE - didactic equipment - circuits blocks: clipping circuit, clamping circuit, one half-wave voltage doubler, simple and double half-wave rectifier, diode bridge rectifier (Graetz bridge) with capacitive input filter, dual power supply, stabilized power supply theoretical topics: behaviour of the diode inserted in circuits that enclose generators of variable signals, simple and double clipper circuits, halfwave voltage doublers, simple half-wave rectifier circuit, double halfwave rectifier circuit, bridge rectifier circuit, power supplies, filters, regulators. Fault simulation. It must be possible to perform the following experiences: Clipping circuits, Clamping circuits, One half wave voltage doubler, The simple and double half-wave rectifier, Diode bridge rectifier (Graetz bridge) with capacitive input filter, Dual power supply, Stabilized power supply. The faults must be inserted by software and by microswitches mounted on the board. The module must be provided with a EISA BUS 31+18 INTERFACE for connection to power supply and PC, with a software able to allow the study of theoretical topics through PC with hyper textual navigation according to the HTML standard. Connections and test points by 2mm terminals. Dimensions of the module: 297x260mm. The module must be supplied with a theoretical and practical manual.