ITB T29/15 ANNEX E - TECHNICAL DATA
Lot No. 1: Blanket
Ser.
1
Item requested
Medium Thermal
blanket
Size/weight
Specification
Unit of
measure
150cm x 200cm
Knitted or woven, 100% pure polyester and/or acrylic
fibers of polyester/cotton.
•
Weight 350 to 450gsm.
•
Thickness: 3mm minimum (1KPa on
2000mm2)
•
Finish: Whipped seam at 10mm from the edge
with 10-13 stitches or stitched/10cm or stitched ribbon
or hemmed on four sides.
•
Fire resistance to cigarette – No ignition
required and fire resistance to flame – No ignition
required.
(ISO129521&2 and ISO12952-3/4.
•
Color: Dark color – Preferable grey.
Packaging: Blankets to be individually wrapped, or
Blankets can be in bundles of 10 or 20. Either option
must ensure that the packaging is waterproof, able to
withstand transportation and handling 6 times. If in
Bundle then the quantity must be clearly marked.
Pcs.
Page 1 of 8
ITB T29/15 ANNEX E - TECHNICAL DATA
Lot No. 2: Mattress
Ser.
2
Item requested
Foam Mattress
Size/weight
Specification
Unit of
measure
180cm x 80cm
x 10cm
Type of Foam: Medium; Polyurethane closed cell foam,
23 – 25kg/m3. Thickness: 10cm. Indentation Load
Defluxion: 16kg minimum. Cover: Covered with Cotton
or Polyester/cotton fabric of 180g/m2 minimum 6DaN
tear strength minimum under ISO 9073-4 (identical to
BS90734) stitched. Optional – Zip: Each cover to be
closed with a strong durable zip fastener. Packaging:
Each group of 5 mattresses shall be securely wrapped in
strong, transparent polyethylene plastic material for
transporting and handling up to 6 times
Pcs.
Page 2 of 8
ITB T29/15 ANNEX E - TECHNICAL DATA
Lot No. 3: Hygiene kit (HK)
Ser.
3
Item Required
Size/Weight
Hygiene Kit
3.a
Sanitary napkins
8 pcs.
3.b
Washing powder
1 kg (200g for
5 family
members)
3.c
Bath soap
125g
Comprises of 10 items (Includes Serials 3.a – 3.j)
All items to be included in item 3.j Cardboard
box - The Cardboard box is to be sealed with tape
The Cardboard box is to be marked ‘Hygiene Kit’
on 2 sides.
Contents to be listed on the outside of the box in
Arabic language
DRC and donor logo to be listed on the outside
of the box (black and white)
24 pcs in total, packed as available in the market - large
size
Quantity
required
per kit
Kit
pack
3 per Kit
For hand-washing - in original package. Different weight per
pack acceptable but the total weight per kit must be 1 kg.
pack
1 per Kit
Jif or Sabbon brand quality or equivalent
pcs
10 per Kit
Cotton - color not white - size approximate
pcs
5 per Kit
SIGNAL/Colgate quality or equivalent
pcs
2 per Kit
Medium hardness
pcs
5 per Kit
3.e
Small washing
towel
Toothpaste
3.f
Tooth brush
3.g
Normal Shampoo
300 ml
Standard quality
bottle
1 per kit
3.h
Shampoo antı-fleas
300 ml
Standard quality
bottle
1 per Kit
3.i
Toilet paper
Double ply, perforated, At least 120 sheets per roll.
pcs
10 per kit
3.j
Cardboard Box
(includes outer
printing or sticker)
Double-corrugated, export-quality cardboard withstands
6m-high stacking for more than 48hours, and 10 handlings
pcs
1 per Kit
3.d
50 cm x 100
cm
250g
Specification
Unit of
Measure
Adult
roll
to fit the kit
Page 3 of 8
ITB T29/15 ANNEX E - TECHNICAL DATA
Lot No. 4: Kitchen kit
Ser.
Item
requested
Size/weight
Specification
Unit of
measure
Kit
Quantity
required
per kit
4
Kitchen kit
Comprises of 12 items (Includes Serials 4a– 4l)
All items to be included in item 4.l Cardboard box
The Cardboard box is to be sealed with tape
The Cardboard box is to be marked ‘Kitchen Set’ on 2
sides in Arabic
Contents to be listed on the outside of the box in
Arabic language
DRC and donor logo to be listed on the outside of the
box (black and white)
4a
Cooking pot
with Lid and
handles
7 Lts
Material - Aluminum; Diameter - Minimum 27cm, maximum
28cm; Handle - 2 aluminum handles, attached with strong rivets,
bent upward to allow a hanging bar to pass; Thickness Minimum 1.75mm; Lid - Stainless Steel min 0.6mm; Aluminum
min1mm; with handle; Finish - no sharp edges
Pcs.
1 per kit
4b
Cooking pot
with Lid and
handles
5 Lts
Material - Aluminum; Diameter - Minimum 22cm, maximum
24cm; Handle - 2 aluminum handles, attached with strong rivets,
bent upward to allow a hanging bar to pass; Thickness Minimum 1.75mm; Lid - Stainless Steel min 0.6mm; Aluminum
min1mm; with handle; Finish - no sharp edges
Pcs.
1 per kit
4c
Frying Pan
2.5 Lts
Material - Stainless steel; Diameter - Minimum 27cm, Maximum
28cm; Handle - 1 stainless steel or plastic handle; Thickness Min 1.75mm Finish - no sharp edges
Pcs.
1 per kit
Pcs.
1 per kit
Pcs.
5 per kit
4d
Bowl
1 Lt.
4e
Table Spoon
17 - 20cm
Material - Stainless steel or non-toxic melamine; Height - 5 –
7cm or 3mm for non-toxic melamine; Thickness - Min 1.5mm;
Finish - No sharp edges
Material - One-piece Stainless steel, solid; Thickness - Min
1.5mm; Capacity - 15ml; Finish - No sharp edges
Page 4 of 8
ITB T29/15 ANNEX E - TECHNICAL DATA
4f
Table Fork
17 - 20cm
Material - One-piece Stainless steel, solid; Thickness - Min
1.5mm; Finish - No sharp edges
Pcs.
5 per kit
Pcs.
5 per kit
4g
Table Knife
17 - 20cm
Material - One-piece Stainless steel, solid; Thickness - Back of
blade 1mm; 1.5mm handle; Finish - No sharp edges, rounded
at the end
4h
Plate
0.75 Lt.
Material - Stainless steel or nontoxic melamine; Thickness Min 1.5mm or 3mm nontoxic melamine; Diameter - 24 to 25cm;
Finish - No sharp edges, rounded at the end
Pcs.
5 per kit
4i
Cup with
handle
0.3 Lt.
Material - Stainless steel or nontoxic melamine; Thickness Min 1.5mm or 3mm nontoxic melamine; Handle - Securely
attached with rivets or welded; Finish - No sharp edges,
rounded at the end
Pcs.
5 per kit
4j
Kitchen knife
with handle
Standard
Material - Stainless steel blade, wood or plastic handle;
Thickness - Blade base min 1.5mm; Length - blade min 15cm
Pcs.
1 per kit
4k
Wooden stirring
spoon
30 cm
Material - Hardwood; Thickness - 10mm diameter min for the
handle and at the thickest point of the spoon end; Finish - No
sharp edges
Pcs.
1 per kit
4l
Cardboard Box
to fit the kit
Material - Double-corrugated, export-quality cardboard;
Strength - Withstand 6m high stacking for more than 48h, and
10 handling; Seal - Tape plus 4 plastic 10mm straps
Pcs.
1 per kit
Page 5 of 8
ITB T29/15 ANNEX E - TECHNICAL DATA
Lot No. 5: Baby Kit Small
Ser
Item
Required
Size/Weight
Specification
Unit of
Measure
Comprises of five items (Includes Serials 5a – 5e) Both items to be in a sealed plastic Bag (2 x suit + 2 x
socks)
All plastic bags to be in a sealed cardboard box
marked “Baby Clothing Kit Small”
Quantity of plastic bags in the box to be marked
Set
Quantity
Per Kit
5
Baby Kit
Small
5a
One Piece Suit
Small
Baby body with long sleeves and leggings with feet attached
to the trousers and a full button-down for nappy changing; 36
kg baby; 0-6 months old, photo attached
Pcs.
2
5b
Baby Socks
Small
Woolen socks for the baby 3-6 kg; 0-6 months old
Pair
2
5c
Diapers
Small
60 diapers per pack in a plastic bag; 3-6 Kg. baby - 0-6
months old
Pack
1
5d
Breast Feeding
Apron
Standard Size
Cotton without sleeves
As per photo
Pcs.
1
5e
Cardboard Box
(includes outer
printing or
sticker)
to fit the kit
Double-corrugated, export-quality cardboard box able to
withstand 10 handlings
Pcs.
1 per kit
Page 6 of 8
Photo
ITB T29/15 ANNEX E - TECHNICAL DATA
Lot No. 6: Baby Kit Medium
Ser
Item
Required
Size/Weight
Specification
Unit of
Measure
Comprises of five items (Includes Serials 6a – 6e) Both items to be in a sealed plastic Bag (2 x suit + 2 x
socks)
All plastic bags to be in a sealed cardboard box
marked “Baby Clothing Kit Medium”
Quantity of plastic bags in the box to be marked
Set
Quantity
Per Kit
6
Baby Kit
Medium
6a
One Piece Suit
Medium
Baby body with long sleeves and leggings with feet attached
to the trousers and a full button-down for nappy changing;
410 kg baby; 7-12 months old, photo attached
Pcs.
2
6b
Baby Socks
Medium
Woolen socks for the baby 4-10 kg; 7-12 months old
Pair
2
6c
Diapers
Medium
60 diapers per pack in a plastic bag; 4-10 Kg. baby - 7-12
months old
Pack
1
6d
Breast Feeding
Apron
Standard Size
Cotton without sleeves
As per photo
Pcs.
1
6e
Cardboard Box
(includes outer
printing or
sticker)
to fit the kit
Double-corrugated, export-quality cardboard box able to
withstand 10 handlings
Pcs.
1 per kit
Page 7 of 8
Photo
ITB T29/15 ANNEX E - TECHNICAL DATA
Lot No. 7: Baby Kit Large
Ser
Item
Required
Size/Weight
Specification
Unit of
Measure
Comprises of five items (Includes Serials 7a – 7e) Both items to be in a sealed plastic Bag (2 x suit + 2 x
socks)
All plastic bags to be in a sealed cardboard box
marked “Baby Clothing Kit Large”
Quantity of plastic bags in the box is to be
marked
Set
Quantity
Per Kit
7
Baby Kit
Large
7a
One Piece Suit
Large
Baby body with long sleeves and leggings with feet attached
to the trousers and a full button-down for nappy changing; 915
kg baby; 12-20 months old, photo attached
Pcs.
2
7b
Baby Socks
Large
Woolen socks for the baby 9-15 kg; 12-20 months old
Pair
2
7c
Diapers
Large
60 diapers per pack in a plastics bag; 9-15 Kg. baby - 12-20
months old
Pack
1
7d
Breast Feeding
Apron
Standard Size
Cotton without sleeves As
per photo
Pcs.
1
7e
Cardboard Box
(includes outer
printing or
sticker)
to fit the kit
Double-corrugated, export-quality cardboard box able to
withstand 10 handlings
Pcs.
1 per kit
Page 8 of 8
Photo