engineering

advertisement
URGENT REQUIREMENT OF ENGINEERS
FOR DRYDOCKS WORLD - DUBAI
1.
Drydocks World – Dubai, U.A.E is requiring for Offshore/ Marine experienced
Engineering personnel. Details of different Engineers are as below:-
Sr.No
1.
2.
3.
4.
5.
6.
7.
Skill
Structural Engineers
Electrical Engineers
Mechanical Engineers
Naval Architects
Piping Engineer
Project Engineer
Statutory Engineer
Department
Engineering
Engineering
Engineering
Engineering
Engineering
Lead Engineering
Engineering
Salary range will be all inclusive of Aed. 12,000/- to Aed. 22,000/- (this will be
decided at the time of the interview / selection based on candidates credentials and
experience)
2.
3.
Interested individuals may send their CVs with experience certificates and get
register with us. For any query / explanation, contact us on email oes@fauji.org.pk and
contact nos. 051-5951726 and 051-5951728. Please keep visiting our website
www.faujioes.org.pk.
NOTE:
Job description is attached.
INSTRUMENTATION ENGINEER-Job description
Scope (A brief statement of overall responsibilities)
Design, calculations and identification of control systems including pneumatic and hydraulic for new build projects.
Preparing documents and drawings for classification society and client. Provide engineering support for major
conversion projects and yard activities. Support project tenders by estimating and preparing MTO.
Responsible: (The person directly responsible to)
LEAD ENGINEER
Responsible for: (The main job activities)

Identification, selection and design of control systems for projects, as required

Undertaking design verification and calculations, as required

Generation of system block diagrams, circuit diagrams, I / O Lists etc.

Preparation of documentation for class and statutory bodies

Witnessing factory acceptance tests and attending dock trials and sea trials

Participating in design reviews and taking necessary follow up actions

Follow up with trades and carry out Inspections during vessel construction

Writing technical specifications for shipboard equipment

Perform other job related duties as assigned by the section head.
Preferred Competencies:

Electrical or mechanical engineering degree from a recognized university.

Minimum 5 years experience in the marine automation/ instrumentation field.

At least 2 to 3 years experience in a design office.

Knowledge in AutoCAD and computer literacy.
Notes / Remarks:
MECHANICAL ENGINEER Job description
Scope (A brief statement of overall responsibilities)
Identification and carryout Heavy load out related calculations & documentation being carried out in the yard.
Provide drawings and calculation for mechanical related jobs identified on repair/ conversion and new build vessels.
Responsible: (The person directly responsible to)
LEAD ENGINEER
Responsible for: (The main job activities)

Ensuring engineering work undertaken is accordance with Departmental Work Instructions,
Procedures and Standards.

Prepare tender design & documentation for new projects.

Identification and design of machinery related jobs for projects.

Design of staging towers, heavy-duty platforms, jigs/support and miscellaneous structures for ships
viz. chain stoppers, helidecks etc. using FEM software.

Preparation of Load-out drawings using ATM system.

Writing technical specifications for shipboard equipment.

Preparing technical specifications for shipboard equipment, technical review of quotations, liaison
with chosen vendor.

Preparation of commissioning procedures for equipments and attending sea-trials.

Witnessing Factory acceptance tests of major equipments.

Perform other job related duties as assigned by the section head.
Preferred Competencies:

Mechanical Engineering degree from a recognized university.

Minimum 5 years in the marine field with experience in preparing build strategies, Heavy load out
calculations etc..

Knowledge of AutoCAD.

Working experience with FEM software’s viz. SESAM, STRAND7 or STAAD Pro.
Notes / Remarks:
MECHANICAL ENGINEER- Machinery&HVAC-Job description
Scope (A brief statement of overall responsibilities)
Identification and design of machinery related jobs for new build vessels. Preparation of relevant drawings and
documentation for classification society, & clients. Design of Miscellaneous structures. Provide Engineering support
to FPSO/FSO Conversion projects.
Responsible: (The person directly responsible to)
LEAD ENGINEER
Responsible for: (The main job activities)

Ensuring engineering work undertaken is accordance with Departmental Work Instructions,
Procedures and Standards.

Prepare tender design & documentation for new projects.

Identification and design of machinery related jobs for projects.

Writing technical specifications for shipboard equipment.

Design of HVAC system on ships and offshore structures

Preparing technical specifications for shipboard equipment, technical review of quotations, liaison
with chosen vendor.

Preparation of commissioning procedures for equipments and attending sea-trials.

Witnessing Factory acceptance tests of major equipments.

Perform other job related duties as assigned by the section head.
Preferred Competencies:

Mechanical Engineering degree from a recognized university.

Minimum 5 years experience in the marine field.

Knowledge of AutoCAD.

Knowledge of piping design software like Pipe Fliw,Auto Pipe, Ceaser II etc.

Working experience with FEM software’s viz. SESAM, STRAND7 or STAAD Pro.
Notes / Remarks:
JOB DESCRIPTION
JOB TITLE:
PAY GRADE:
SECTION CODE:
H
NDS-01
DATE:
DEPARTMENT:
STRUCTURAL ENGINEER
APPROVED
ENGINEERING
Scope (A brief statement of overall responsibilities)
Responsible for the coordination of Structural Engineering for a project(s). Carryout structural design and analysis, develop outfitting
designs and procedures for the projects. Organize and maintain effective information flow with other members of engineering and
production departments.
Responsible: (The person directly responsible to)
LEAD ENGINEER STRUCTURE
Responsible for: (The main job activities)

Prepare detailed structural drawings & calculations, hull outfit design calculations and drawings.

Liaise with Class & Owners with regard to drawing & document approvals.

Preparing technical specifications for structural and outfitting material, review of quotations, liaison with chosen vendor,
preparation of trial procedures.

Ship modeling and structural design/ analysis using design software.

Follow up with trades and carry out inspection during hull construction and outfitting.

Ensure that Production and Design Activities are complementary and use the latest available technology, investigate methods for
reducing project man-hours, costs and improving schedule.

Check Production model and participate in design review meetings.

Liaise with Fabrication and Outfitting departments to improve and develop the production deliverables.

Investigate, develop and follow up the feasibility of introducing new production or design methods, implement new procedures
and system within the Production Engineering team, which enhance efficiency and productivity.

Perform the duties of a Project Engineer if required.

Maintaining the discipline of the department and yard.

Conducting shipyard audits, risk assessment and training as required.

Ensure that the Safety, Quality & Environment requirements of the yard are strictly followed.

Perform other job related duties as assigned by the section head.
Preferred Competencies:

Degree in Naval Architecture, Structural or Mechanical Engineering from recognized University.

Experience in a shipbuilding industry

Experience in Structural design software

Experience in 3D Modeling Production Engineering software such as FORAN, TRIBON or similar is preferred.
Notes / Remarks:
PROJECT ENGINEER Job description
Scope (A brief statement of overall responsibilities)
Planning, design and execution of new buildings and other specialized projects, including conversion and repair
work.
Responsible: (The person directly responsible to)
LEAD ENGINEER
Responsible for: (The main job activities)

Ensuring engineering work undertaken is accordance with Departmental Work Instructions, Procedures and Standards.

Maintain and update the client supplied engineering drawing register and schedule.

Maintain separate records of sample drawings issued by client for our easy reference.

Supervise, maintain and update the yard engineering deliverables list and schedule.

Submission of engineering status reports for weekly and monthly progress meetings.

Coordinate with the trades and project management team for various engineering and design requirements of the project.

Advise the project team on the various technical issues as a result of project execution as regards to class and standard
engineering practice, more specifically on clash checks.

Liaisons with the client, class and third party on engineering requirements.

Ensure the timely submission of yard engineering to client.

Ensure the timely receipt of client engineering details so as not to hamper smooth construction and highlight the requirement
of critical documents in advance.

Preparation and submission of engineering design, method statements and specific procedures in line with client
requirements.

Preparation and submission of the As-built drawings and data in accordance with contract requirements.

Preparation and submission of the spare parts and interchangeability record and related documentation.

Preparation, compilation and submission of operation and maintenance manuals as required.

Preparation, compilation and submission of commissioning checklist and completion documents.

Conducting shipyard audits, risk assessment and training as required.

Ensure that the Safety, Quality & Environment requirements of the yard are strictly followed.

Perform other job related duties as assigned by the section head.
Preferred Competencies:

Graduate in Naval Architecture/Marine Engineering or similar.

Computer Proficient MS Office, AutoCAD.

Shipyard or project experience 3 years.
Notes / Remarks:
JOB DESCRIPTION
JOB TITLE:
PAY GRADE:
SECTION CODE:
H
NDS-01
DATE:
DEPARTMENT:
STRUCTURAL ENGINEER
APPROVED:
ENGINEERING
Scope (A brief statement of overall responsibilities)
Responsible for the coordination of Structural Engineering for a project(s). Carryout structural design and analysis, develop outfitting
designs and procedures for the projects. Organize and maintain effective information flow with other members of engineering and
production departments.
Responsible: (The person directly responsible to)
LEAD ENGINEER STRUCTURE
Responsible for: (The main job activities)

Prepare detailed structural drawings & calculations, hull outfit design calculations and drawings.

Liaise with Class & Owners with regard to drawing & document approvals.

Preparing technical specifications for structural and outfitting material, review of quotations, liaison with chosen vendor,
preparation of trial procedures.

Ship modeling and structural design/ analysis using design software.

Follow up with trades and carry out inspection during hull construction and outfitting.

Ensure that Production and Design Activities are complementary and use the latest available technology, investigate methods for
reducing project man-hours, costs and improving schedule.

Check Production model and participate in design review meetings.

Liaise with Fabrication and Outfitting departments to improve and develop the production deliverables.

Investigate, develop and follow up the feasibility of introducing new production or design methods, implement new procedures and
system within the Production Engineering team, which enhance efficiency and productivity.

Perform the duties of a Project Engineer if required.

Maintaining the discipline of the department and yard.

Conducting shipyard audits, risk assessment and training as required.

Ensure that the Safety, Quality & Environment requirements of the yard are strictly followed.

Perform other job related duties as assigned by the section head.
Preferred Competencies:

Degree in Naval Architecture, Structural or Mechanical Engineering from recognized University.

Experience in a shipbuilding industry

Experience in Structural design software

Experience in 3D Modeling Production Engineering software such as FORAN, TRIBON or similar is preferred.
Notes / Remarks:
Download