April 9, 2010
Product Data Sheet
Part Number:
Nomenclature:
B810-WFG
General Maintenance Universal absorbent boom composed of Cellulose Fiber,
Spun Bond gray outer sleeve, Yellow rope, Polyester Netting with UV
inhibitor, rings and snaps.
Gray/ Yellow rope, White netting.
8” dia.(nominal) X 10’ length (x/- 2”) ½” concentricity
12 lbs
28.26 gallons
4
113.04 gallons
48 lbs.
24” diam. x 23” high
16
42” x 48” x 98”
675 lbs.
Unit Color:
Unit Dimensions:
Unit Weight:
Unit Absorbency:
Units per Case /Bale:
Case / Bale Absorbency:
Case / Bale Weight:
Case / Bale Dimensions:
Case / Bale per Pallet:
Pallet Dimensions:
Pallet Weight:
Description: A highly absorbent General Maintenance Boom filled with cellulose fibers, incased
with a very strong, tear resistant polyester outer skin. The normal application is to contain and to
absorb oils, coolants, solvents, water and other non-aggressive liquids.







Rope running along length of Boom adds strength for deployment and retrieval
Strong, zinc-plated carbon steel attachment clips and rings allow you to link Booms
together for greater length
Universal Cellulose fill is highly absorbent.
Tough outer mesh resists snags and debris while remaining pliable
Spun bond polypropylene skin is UV resistant up to 12 months; meets NFPA 99
standards for static decay
Hugs ground and machinery to confine and soak up spills.
Can be incinerated.
Regulations and Compliance
29 CFR 1910.22 (a)(2)
Supply Pro, Inc
1231 Hahlo Street
Houston Texas, 77020
“The floor of every workroom shall be maintained in a clean and, so far as possible, a dry
condition. Where wet processes are used, drainage shall be maintained and false floors,
platforms, mats, or other dry standing places should be provided where practicable.”
www.prosorbents.com
Phn: 713-672-9080
Fax: 713-674-7659
April 9, 2010
Component Specifications
Net Material
Yarn Construction
Thermal Properties
Mesh Pattern
Tensile Strength
Tenacity
Natural color polyester multifilament yarn.
72 strands or more around the circumference w/ 500 denier each strand.
Melts at 450 degrees F
Hexagon, 2-stitch
875 lbs, 8.61 lbs per end
7.71 grams
Sock Material
Weight
Tensile strength M.D.
Tensile strength C.D.
Elongation M.D.
Elongation C.D.
Trapezoid Tear M.D.
Trapezoid Tear C.D.
1.25 ounce per square yard hydrophilic spun bond polypropylene
40 gsm +/- 10%
per ASTM D3776-96
124 N/cm2 +/- 20%
per ASTM D5034-90
101 N/cm2 +/- 20%
per ASTM D5034-90
80% +/- 20%
per ASTM D5034-90
90% +/- 20%
per ASTM D5034-90
9 lbs +/- 20%
per ASTM D5733-95
12.4 lbs +/- 20%
per ASTM D5733-95
Rope Material
Diameter
Circumference
Tensile Strength
3 strand monofilament polypropylene
¼”
¾”
1,125 lbs
Bit Snap specification
Location
Material
Size
Break Strength
Rope sets in the base of the bit-snap and then clipped to hold the bit-snap in place.
19” (+/- 1” from end of boom)
100% ¼” zinc plated steel
2 1/2” long
895 lbs
O-ring specification
Material
Size
Break Strength
Rope, net and sock are looped through the o-ring and fastened with the clip
4.5 mm thick nickel plated welded steel ring.
1 ¼” diameter
2878 lbs
Clip Specification
Size
Break Load
Aluminum alloy cross clip, applied by a pneumatic clipper.
.188” Diameter
470 – 530 lbs.
Supply Pro, Inc
1231 Hahlo Street
Houston Texas, 77020
www.prosorbents.com
Phn: 713-672-9080
Fax: 713-674-7659