EE/2015-16/
NOTICE FOR INVITING QUOTATION
Dt. 06.11.2015
COURIER
To,
Dear Sir(s),
The wax sealed/tempers proof quotation are invited on percentage rate basis from NITIE empanelled
contractors for the following work on behalf of Director, NITIE Mumbai – 87. The complete quotation
documents should reach on or before the date and time of submission. Without wax sealed quotation will
be summarily rejected.
Name of work
Estimated cost of work put to quotation
Earnest Money Deposit
Period of contract
Last date of issue of quotation
Last date of submission of quotation
Place of submission of quotation
Date of opening of quotation
Validity
: Providing partly glazed panelled doors and rolling
shutters at rear side openings of ALB.
: Rs. 2,36,081.00
: Rs.4,722.00 (Pay order or DD to be attached in
favour of "NITIE,Mumbai - 87)
: 20 days.
: 23.11.2015 up to 03.00 P.M.
: 24.11.2015 up to 10.00 A.M.
: Quotation Box kept in front of the office of
Controller of Examination, Admn.
Building, NITIE.
: 24.11.2015 at 11.30 A.M.
: 90 days from date of submission
NITIE reserves the right to reject any or all quotation without assigning any reason thereof. This notice is
also available on web-site : www.nitie.edu.
Thanking you,
Yours faithfully,
EXECUTIVE ENGINEER
CC: DR (A &A)/CPSC
NITIE/IIT Notice Board/cpp portal
NITIE, Mumbai -400 087
SCHEDULE
Name of work:- Providing partly glazed paneled doors & rolling shutters at rear side
opening of ALB.
Sr.
Item
No
1 Providing and fixing Country Teak wood frame as
per drawing for second class doors without
ventilators, window, fanlights, etc. including all
mouldings, rebating, holdfasts and finishing with one
coat of primer complete.
2
3
4
5
6
Providing and fixing C.C.T.W. double leaf 40mm
thick second class partly paneled partly glazed
door without ventilator adopting sections and sizes as
given in Standard Specifications Volume –II (1981)
or as per detailed drawings including brass fixtures
and fastenings and finishing the wood work with one
coat of primer compete. (without frame)
Providing and fixing hydraulic door closer of
approved quality and make to door shutter including
making proper adjustment for smooth operation etc.
complete.
Providing and applying Melamine polish of required
finish to woodwork by spray machine including
knotting and preparing the surface by scrapping,
applying French polishing, scaffolding if required
etc. complete.
Providing and fixing
grilled rolling shutter
fabricated from 8 mm M.S. Rods with side guides,
bottom rail, brackets, door suspension shaft including
rolling spring, locking arrangement and housing box
at top with one coat of red lead primer etc. Complete.
Providing and applying two coats of aluminum
paint of approved make to new structural steel
work in buildings and workshops including
scaffolding if necessary, cleaning and preparing
surfaces by solvent, degreasing and derusting by
manual
scraping/mechanically
by
sand
Qty.
Unit
Rate
(Rs.)
Amount
(Rs.)
0.20
M3
118684.20
23,736.84
7.60
M2
5895.45
44,805.42
2
No.
619.85
1,239.70
23.00
M2
809.85
18,626.55
11.50
M2
3766.00
43,309.00
11.50
M2
52.00
598.00
blasting/flame cleaning/by chemical
complete (excluding primer coat)
7
8
methods
Providing and fixing 3.50mm to 4mm thick veneer
finish wall paneling made out of 50 x 25mm CCTW
frame of size 600 x 600mm center or as per site
condition covered by 6mm thick marine plywood ply
requisite
manufacture
viz
Anchor/Century/
Kenwood/Duro/jet or equivalent with generally
confirming Kenwood to IS 710-1980 finished with
3.5 to 4 mm thick approved machine/veneer of 18.50
approved colour (Satin work nut go matched vercon
and in pattern and design including melamine
polishing and antitermite treatment to plywood and
wood work including all leads and lifts complete as
per Architects Drawing and instruction of Engineerin-charge etc. complete.
Providing and fixing T.W. moulding 25 to 50mm
wide of approval shape including melamine polish
etc. complete as directed.
25.00
M2
5091.40
94,190.90
Rmt
383.00
9,545.00
Total Amount
2,36,081.40
Say Rs.
2,36,081.00
Inclusive of all taxes.
We hereby ready to execute the work __________ % (in words _________________________
____________________________) .
ABOVE / BELOW/ AT PAR on t he estimate cost put to tender inclusive of all taxes.
Total Tender Amount quoted after considering the percentage in figure Rs. _____________
Total Tender Amount quoted after considering the percentage in words Rs.___________
___________________________
Dt. _______
CONTRACTOR
SEAL & ADDRESSES
EXECUTIVE ENGINEER