Crystal Dish Washer Salt

advertisement
1
FP213
SAFETY DATA SHEET
Crystal Dish Washer Salt
Revision Date 29th April 2013
1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE
COMPANY / UNDERTAKING
Product Name
Crystal Dish Washer Salt
Synonyms, Trade Name
Crystal Dish Washer Salt
Application
Auto Dish Washing
Supplier
Prime Industries Limited,
Unit 2 Broughton Way,
Halebank Industrial Estate,
Widnes,
WA8 8YX.
PHONE 0151 423 0110
FAX 0151 423 0770
sales@primeindustries.co.uk
Emergency Contact Number
0151 423 0110
SDS No.
C2/423
2. HAZARDS IDENTIFICATION
This product is not classified as dangerous according to EU Directive 1999/45/EC
Classification
Eye contact: Transient superficial irritation.
Skin contact: Prolonged exposure may cause skin irritation
Ingestion: Possible mild gastro-intestinal irritation with nausea & vomiting.
Inhalation: Inhaling aerosolized product may cause mild irritation of respiratory system
3. COMPOSITION / INFORMATION ON INGREDIENTS
NAME
EC No.
CAS-No.
Symbols
Classification
Conc
Sodium Chloride
231-598-3
7647-14-5
N/a
N/a
>99.9
The Full Text For all R- Phrases Are Displayed in Section 16
4. FIRST-AID MEASURES
Eye Contact
Skin Contact
Ingestion
Inhalation
Make sure to remove any contact lenses from eyes before rinsing. Promptly wash eyes with plenty of water
while lifting eye lids. Continue to rinse for at least 15 minutes. Get medical attention if discomfort continues.
Remove affected person from source of contamination. Remove contaminated clothing. Wash the skin
immediately with soap & water. Get medical attention if discomfort continues.
Immediately rinse mouth and provide fresh air. Get medical attention if discomfort continues. Do not induce
vomiting.
Move exposed person to fresh air. Rinse nose & mouth with water. Seek medical attention if discomfort
continues
Page 1 of 3
2
FP213
5. FIRE-FIGHTING MEASURES
Extinguishing Media Use:
Unusual Fire & Explosion Hazards
This product is not flammable. Use fire extinguishing media appropriate for surrounding
materials.
None
Specific Hazard
None
Protective Measures in Fire
None
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
Observe normal standards of industrial hygiene for handling chemicals. Do not breathe dust. Avoid
contact with skin and eyes
The material is designed for Dish washing use and normal safe disposal to foul sewer. In the event of a
spillage of a large amount of powder, entry to surface water drainage should be avoided. Major
spillage losses to surface drainage must be notified to the local waste authority
Contain and collect spillage. Scoop up product ideally with a vacuum and transfer into suitable
containers. Dispose of in accordance with local waste authority
Environmental Precautions
Spill Cleanup Methods
7. HANDLING AND STORAGE
Usage Precautions
Fire & Explosion
Storage Precautions
Avoid Spilling, skin and eye contact. Assure adequate dust control avoid breathing dust. Wash properly with
soap and water
No special measures
Store in a cool dry area. External damage to containers should be avoided. Seal containers after use. Do not
store product in direct sunlight.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Protective Equipment
Engineering Measures
Provide adequate ventilation
Respiratory Equipment
No specific recommendations made, but protection against nuisance dust must be used when general
levels exceed 10 mg/m3
Use suitable protective gloves if risk of skin contact
Hand Protection
Eye Protection
Other Protection
Hygiene Measures
Wear safety goggles where eye exposure is reasonable probable
Wear suitable protective clothing to prevent skin contact
Do Not Smoke In Work Area! Wash at the end of each work shift and before eating, smoking and using
the toilet. Wash promptly if skin becomes contaminated. Promptly remove any clothing that becomes
contaminated. When using do not eat, drink or smoke.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Granular powder
Colour
White
Odour
Low odour
Solubility
Freely in water
Boiling Point
1413°C
Melting Point
802°C
Relative Density
2.165 g/ml
Vapour Pressure
2.4 mm Hg 747
10. STABILITY AND REACTIVITY
Page 2 of 3
3
FP213
Stability
Conditions to avoid
A stable product under normal conditions
Avoid excessive heat for prolonged periods of time
11. TOXICOLOGICAL INFORMATION
Toxic Dose 1-ld 50
LD 50(Oral Rat) >3000g/kg
Ingestion
May cause discomfort if swallowed
Inhalation
Dust in high concentrations may irritate respiratory system
Skin Contact
There may be mild irritation and redness at the site of contact. Wash affected area with water
Eye Contact
There may cause irritation and redness and blurred vision. If in contact with eyes flushing with water is
recommended
12. ECOLOGICAL INFORMATION
Biodegradability
Ecotoxicity
This product is not readily biodegradable
Not regarded as hazardous to the environment
13. DISPOSAL CONSIDERATIONS
General Information
Consumer products ending up down the drain after use. Observe safe handling precautions and local
legislation
14. TRANSPORT INFORMATION
Not subject to ADR / IATA / IMDG Codes
15. REGULATORY INFORMATION
Labelling
General Information
Statutory Instruments
Approved Code Of Practice
Guidance Notes
N/a
This product is not classified as dangerous according to EU Directive 1999/45/EC and national laws,
All substances in the preparation are registered in the EU
Chemicals (Hazard Information and packaging) Regulations
Classification and labelling of substances and preparations dangerous for supply. Safety Data Sheets
for Substances and preparations.
Workplace Exposure limits EH40. CHIP for everyone HSG (108)
16. OTHER INFORMATION
REV. No. / REPL. SDS
Generated
SDS No.
Safety Data Sheet Status
Approved.
Signature
Risk Phrases in Full
Safety Phrases
Notes
C2/423
13th September 2011
S2 - Keep out of reach of children
S22 - Do not breath dust
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S51 - Use only in well ventilated areas
This information relates only to the specific material designed and may not be valid for such
material used in combination with any other materials or in any process. Such information is to the
best of the company’s knowledge and belief, accurate and reliable as of date indicated. However,
no warranty, guarantee or representation is made as to its accuracy, reliability or completeness. It
is the user’s responsibility to satisfy himself as to the suitability of such information for his own
particular use.
Page 3 of 3
Download