Seungjun Kim Flexible and Nanobio Device Lab. Department of Materials Science and Engineering Korea Advanced Institute of Science and Technology (KAIST) 373-1 Guseong Dong, Yusung-gu, Daejeon, Korea, Zip:305-701 e-mail: s.j.kim@kaist.ac.kr; Web: http://fand.kaist.ac.kr Tel: +82-42-350-3383; Fax: +82-42-350-3310 Education M.S degree in Korea Advanced Institute of Science and Technology in Korea, Fab, 2010. B.S. degree in Sungkyunkwan University in Korea, Fab, 2008 Experience 2/08-current: Research Assistant, Korea Advanced Institute of Science and Technology in Korea Academic advisor: Prof. Keon Jae Lee Fully functional flexible resistive memory Research Interests Fabrication of high performance flexible semiconductor device Fabrication of single crystal silicon device for high performance flexible electronic devices Transferring single crystal semiconductor ribbons to plastic substrate using advanced soft lithography Fabrication of integrated circuits on plastic substrates Si doping with ion implantation, solid source doping, and spin-on-dopant (SOD) Fabrication of fully functional flexible memory Developing new architecture design for flexible resistive memory on plastic substrates Fabrication of high performance selection device (transistor, diode, selector) on plastic substrates Fabrication of flexible resistive change memory Analytical equipment Scanning electron microscopy (SEM), Secondary ion mass spectroscopy (SIMS), Atomic Force microscopy (AFM), X-ray diffraction, X-ray photoelectron spectrometer (XPS), Additive/subtractive techniques The design and construction of UHV equipment, and film growth under UHV condition using sputtering, E-beam evaporator, PECVD and ALD Etching of thin films: Reactive ion etching (RIE), Inductively coupled plasma etching (ICP), wet etching of semiconductor Electrical property Characterizatioion Hall-effect measurement of thin semiconductor films, Capacitance-Voltage and Current-Voltage measurements for device structure Hornors and Award 2011 Best poster award of International Workshop on Flexible & Printable Electronics 2011 2008 College of Engineering Valedictorian for Commencement 2003 in Sungkyunkwan University 2003 National Science and Engineering Scholarship from Korea government Journal Publications 1. “Flexible One Diode-One Resistor Resistive Switching Memory Array on Plastic Substrate” H. Yoo, S. Kim and K. Lee (co-first author) 2. “In vivo Silicon-Based Flexible Radio Frequency Integrated Circuits Monolithically Encapsulated with Bio-compatible Liquid Crystal Polymers” G. Hwang, D. Im, S. Lee, J. Lee, M. Koo, S. Park, S. Kim, K. Yang, S. Kim, K. R. Lee and K. Lee, ACS Nano, 7(5), 4545, (2013). 3. “Flexible Multilevel Resistive Memory with Controlled Charge Trap B- and N-Doped Carbon Nanotubes” S. Hwang, J. Lee, S. Kim, J. Park. C. Ahn, K. Lee, T. Lee and S. Kim, Nano Letters, 12(5), 2217 (2012). 4. “Flexible Memristive Memory Array on Plastic Substrates” S. Kim, H. Jung, S. Kim, S. Choi and K. Lee, Nano Letters, 11(12) , 5438 (2011). 5. “Bendable Ferroelectric Capacitors on Plastic Substrates for High Performance Flexible Devices” K.-I. Park, S. Y. Lee, S. Kim, J. Jang, S. J. L. Kang and K. Lee, Electrochemical Solid-State Letters, 13(7) , G57 (2010)