Seungjun Kim - Flexible and Nanobio Device Lab.

Seungjun Kim
Flexible and Nanobio Device Lab.
Department of Materials Science and Engineering
Korea Advanced Institute of Science and Technology (KAIST)
373-1 Guseong Dong, Yusung-gu, Daejeon, Korea, Zip:305-701
e-mail: [email protected];
Tel: +82-42-350-3383; Fax: +82-42-350-3310
M.S degree in Korea Advanced Institute of Science and Technology in Korea, Fab, 2010.
B.S. degree in Sungkyunkwan University in Korea, Fab, 2008
2/08-current: Research Assistant, Korea Advanced Institute of Science and Technology in Korea
Academic advisor: Prof. Keon Jae Lee
Fully functional flexible resistive memory
Research Interests
Fabrication of high performance flexible semiconductor device
Fabrication of single crystal silicon device for high performance flexible electronic devices
Transferring single crystal semiconductor ribbons to plastic substrate using advanced soft
Fabrication of integrated circuits on plastic substrates
Si doping with ion implantation, solid source doping, and spin-on-dopant (SOD)
Fabrication of fully functional flexible memory
Developing new architecture design for flexible resistive memory on plastic substrates
Fabrication of high performance selection device (transistor, diode, selector) on plastic substrates
Fabrication of flexible resistive change memory
Analytical equipment
Scanning electron microscopy (SEM), Secondary ion mass spectroscopy (SIMS),
Atomic Force microscopy (AFM), X-ray diffraction, X-ray photoelectron spectrometer (XPS),
Additive/subtractive techniques
The design and construction of UHV equipment, and film growth under UHV condition using
sputtering, E-beam evaporator, PECVD and ALD
Etching of thin films: Reactive ion etching (RIE), Inductively coupled plasma etching (ICP), wet
etching of semiconductor
Electrical property Characterizatioion
Hall-effect measurement of thin semiconductor films,
Capacitance-Voltage and Current-Voltage measurements for device structure
Hornors and Award
2011 Best poster award of International Workshop on Flexible & Printable Electronics 2011
2008 College of Engineering Valedictorian for Commencement 2003 in Sungkyunkwan University
2003 National Science and Engineering Scholarship from Korea government
Journal Publications
1. “Flexible One Diode-One Resistor Resistive Switching Memory Array on Plastic Substrate”
H. Yoo, S. Kim and K. Lee (co-first author)
2. “In vivo Silicon-Based Flexible Radio Frequency Integrated Circuits Monolithically Encapsulated
with Bio-compatible Liquid Crystal Polymers”
G. Hwang, D. Im, S. Lee, J. Lee, M. Koo, S. Park, S. Kim, K. Yang, S. Kim, K. R. Lee and K. Lee,
ACS Nano, 7(5), 4545, (2013).
3. “Flexible Multilevel Resistive Memory with Controlled Charge Trap B- and N-Doped Carbon
S. Hwang, J. Lee, S. Kim, J. Park. C. Ahn, K. Lee, T. Lee and S. Kim, Nano Letters, 12(5), 2217 (2012).
4. “Flexible Memristive Memory Array on Plastic Substrates”
S. Kim, H. Jung, S. Kim, S. Choi and K. Lee, Nano Letters, 11(12) , 5438 (2011).
5. “Bendable Ferroelectric Capacitors on Plastic Substrates for High Performance Flexible Devices”
K.-I. Park, S. Y. Lee, S. Kim, J. Jang, S. J. L. Kang and K. Lee, Electrochemical Solid-State Letters,
13(7) , G57 (2010)