OPM-15/25 Optical Power Meter
OPM-15/25 series Optical Power Meter paired with ShinewayTech SLS series
Stabilized Laser Source can meet general test requirements of fiber
identification, attenuation/loss measurements, continuity verification and
transmission quality evaluation on singlemode and multimode fibers in
LAN/WAN/CATV infrastructure. OPM-15/25 is ideal for both lab and field
applications offering high quality, high stability and competitive low costs.
Applicable on singlemode/multimode fibers
Microprocessor & linear amplifier ensure long-time accuracy
Interchangeable connectors: FC/SC/ST
Dual-way power supply: 9V alkaline battery/AC adapter
Pocketsize, lightweight and damp-dust-shock proof
MOD tones detection
PC software for data upload and reporting (OPM-25 only)
OPM-50 Intelligent Optical Power Meter
OPM-50 paired with SLS-50 Intelligent Stabilized Laser Source can be used to
identify fiber, measure attenuation and loss, verify continuity and evaluate fiber
link transmission quality.

Automatic wavelength identification
Remote reference value setting
FTTx applicable
Internal clock & fiber S/N editable
Data Transfer to PC via USB
70 hours continuous operation
Automatic Wavelength Identification
Compatible with the digital encryption protocols of SLS-50, OPM-50 can
automatically identify the wavelength of the optical signals transmitted from
SLS-50 and switch to the corresponding test mode, which greatly reduces the
workload at both ends and avoids potential error.
Compatible with FTTx Test
OPM-50 can be applied to measure Triple-play signals (1310nm, 1490nm and
1550nm) on Passive Optical Network (PON).
PPM-30 PON Power Meter
World Most Powerful Integrated PON Tester
PPM-30 PON Power Meter can perform in-service testing of all PON signals
(1310/1490/1550nm) on any spot of the network featuring pass-through design, burst mode
and Pass/Warning/Fail assessment function, which can greatly help you evaluate PON
signals transmission quality.
Specially designed for FTTx/PON (B/E/G) applications
Simultaneous
Triple-play
PON
signals
measurement:1310/1490/1550nm
(Voice/Data/Video)
Pass-through test: Applicable anywhere on PON
Burst mode 1310nm upstream signal detection
Pass/Warning/Fail assessment
Optional Visible Fault Locator for macro bend detection and fiber identification
Optional Stabilized Laser Source and SM/MM Power Meter
Pass-through Simultaneous Measurement & Display of All PON Signals
PPM-30 works as a pass-through device, which can be connected anywhere between OLT
and ONU. A small percentage of optical signals are extracted for use by PPM-30 detectors.
This approach enables all wavelengths to be used simultaneously and introduces no
interruption to network services.
Pass-through
Filtered
connection and simultaneous measurement of all PON signals
detectors for individual signal measurement at each wavelength
Upstream
signal burst mode detection at 1310nm
PPM-50 PON Power Meter
The Smallest Full-feature PON Power Meter
PPM-50 PON Power Meter can perform in-service testing of all PON signals
(1310/1490/1550nm) on any spot of the network featuring pass-through design, burst mode
and Pass/Warning/Fail assessment function, which can greatly help you evaluate PON
signals transmission quality
Specially designed for FTTx/PON (B/E/G) applications
Simultaneous
Triple-play
PON
signals
measurement:1310/1490/1550nm
(Voice/Data/Video)
Pass-through test: Applicable anywhere on PON
Burst mode 1310nm upstream signal detection
Pass/Warning/Fail assessment on PPM-50 unit
Cable/Fiber ID editing
CSV file format
Color TFT, readable under sunlight
Compact design
Pass-through Simultaneous Measurement & Display of All PON Signals
PPM-50 works as a pass-through device, which can be connected anywhere between OLT
and ONU. A small percentage of optical signals are extracted for use by PPM-50 detectors.
This approach enables all wavelengths to be used simultaneously and introduces no
interruption to network services.
Pass-through
Filtered
connection and simultaneous measurement of all PON signals
detectors for individual signal measurement at each wavelength
Upstream
signal burst mode detection at 1310nm