CHRISTIAN ANDREW J. GALICIA
ENVIRONMENTAL ENGINEER
OCCUPATIONAL HEALTH & SAFETY ENGINEER
Contact Numbers: (+974)33547756, (+974)77474272, (+63)9175222128
E-mail address: cjgalicia@gmail.com
Profile:
Practicing Professional Environmental Engineer/ Occupational Health and Safety Engineer with
more than 8 years of experience gained from Oil and Gas, Construction and Industrial Manufacturing
Firms.
Skills:







Well-versed in USEPA, 40 CFR: Protection of the Environment, and other relevant references.
Well-versed in USEPA Methods 18 & 25A – Volatile Organic Compounds,
USEPA Method 23 – Dioxins & Furans and USEPA Method 29 – Metals
Knowledgeable in AutoCAD 2004 (Level 1&2 Fundamental & Intermediate)
Team player, can work under minimum supervision, self-motivated and hardworking
Possess strong verbal & written communications skills.
Proficient in Microsoft Office such as Microsoft Word, Microsoft Excel and Microsoft PowerPoint
Holder of a valid Philippine and GCC Driving License
Educational Profile:
June 2012 - present
Diploma in Environmental Management
National Examination Board in Occupational Safety and Health
(NEBOSH SHEilds - United Kingdom
June 1999 up to
December 2004
Bachelor of Science in Environmental and Sanitary Engineering
MAPUA INSTITUTE OF TECHNOLOGY (MIT)
Intramuros, Manila - Philippines
Affiliations:













Institution of Occupational Safety and Health (IOSH) SHEilds, United Kingdom. (Hull, UK)
Inductee (TBOR-0012-07) - Tropical Basic Offshore Safety Induction and Emergency Training,
Offshore Petroleum Industry Training Oraganization
Fire Warden - Doha Industrial Safety Services (Doha, Qatar)
Source Emission Test Team Leader - Department of Environment and Natural Resources
(DENR), Environmental Management Bureau (EMB) (Manila, Philippines)
Scaffold Supervisor - TÜV Rhienland Middle East (Doha, Qatar)
First Aider - Philippine National Red Cross & Venture Gulf Training Center (Doha, Qatar)
Member – World Safety Organization (Qatar Chapter)
Member - International Institute of Risk and Safety Management (London, UK)
Fellow - International Safety, Quality, Environment Management Association (London, UK)
Member - Air and Waste Management Association (PA, U.S.A.)
Member - American Industrial Hygienist Association (VA, U.S.A.)
Associate Member - Safety Organization of the Philippines, Inc.
Member - Philippine Association of Safety Engineer (Qatar Chapter)
Curriculum Vitae of Christian Andrew J. Galicia, BSc EnSE
Page 1
Professional Profile:
May 23, 2009 - Present
Environmental, Health and Safety Engineer
Qatar Building Company
Doha, Qatar
Projects Undertaken:
(from most recent)
1. CP745/2 – Phase 2 IA/11-12/C/04/G Construction of Al Gharaffa Area Sewerage
Al Gharrafa, Al Rayyan, Qatar
(May 2013 up to present)
2. CP 626/2 – PWA/GTC/077/09-10 Design and Construction of Sewerage System
Ain Khalid, Al Rayyan Qatar
(October 2011 – May 2013)
3. PWA/GTC/040/10-11 – Design and Construction of Traffic Diversion
Wakra – Ras Abu Aboud Inter Section – Traffic Sign)
(March 2011 – October 2011)
4. Lusail Development and Sewage Treatment Works - Pipe installation for the extension of
Doha West Sewage Treatment Plant.
(August 2010 – March 2011)
5. CP565 - DSC 0039 C1/Doha & Rayyan Sewerage Schemes Construction of Muraikh Area
Drainage & Outfall - Construction of 18 Km surface water pipe lines by Micro tunnel (dia 1500,
2000 and 2400mm depths up to 20 m) / trenching and conventional systems (dia 800 to 2000
mm). Construction of underground Tank capacity 50,500 m3 and pump station.
(May 2010 – August 2010)
6. Energy City Qatar – ECQ1 Civil Infrastructure Work – Complete infrastructure works for the
Energy City including storm water drainage, sewerage, potable water, irrigation, power,
telecommunication, traffic signals, and roads networks.
(May 2009 – May 2010)
Duties and Responsibilities:











Preparation of conceptual and detailed project safety plan design for sewerage system.
Preparation of risk assessment and comprehensive safety programs within scope of work.
Involvement in identifying hazards which includes working in heights, handling of chemicals,
working on hot conditions, minimizing risk of potential hazards, abides general safety precautions
to minimize if not to eliminate accidents.
Conducting daily safety inspections and give corrective actions to the safety deviations of subcontractors.
Performing outgoing audits and corrective action planning.
Ensure incident reports and investigations are conducted in a timely and quality manner.
Liaise with consultants and clients with regards to all safety issues and concerns.
Attend coordination meetings to clients and project management for approval on design and
specification.
Preparation of technical report writing in accordance to local authority rules and regulations
Correspond to queries and letters regarding the project submittals.
Coordinate with other trade discipline.
Curriculum Vitae of Christian Andrew J. Galicia, BSc EnSE
Page 2
March 8, 2005 – April 20, 2009
Environmental Engineer (Team Leader)
Berkman Systems, Inc. (BSI)
Greenhills, San Juan City, Philippines
Projects Handled:
JG Summit Petrochemical Corporation
Nestle Philippines, Inc.
Texas Instrument Philippines, Inc.
Mitsumi Philippines, Inc.
Chevron Texaco
Pilipinas Shell Petroleum Corporation
Shell Philippines Exploration B.V. Malampaya Onshore/Offshore Gas Plant
Procter and Gamble Philippines, Inc.
Samsung Electronics Philippines
San Miguel Foods, Inc.
Honda Philippines
The Coca – Cola Export Corporation
Colgate-Palmolive Inc.
APO Cement Corporation
Siemens Power Operation, Inc.
Wyeth Philippines, Inc.
Panasonic Mobile Communications Corporation of the Philippines
Asia Brewery, Inc.
Dow Chemicals (Union Carbide Phil.)
Duties and Responsibilities:






Source emission testing/monitoring for sulfur dioxide (SO2), sulfur trioxide (SO3), nitrogen dioxide
(NO2), heavy metals, particulate matters, sulfuric acid mist (H2SO4), carbon monoxide (CO),
hydrogen sulfide (H2S), volatile organic compounds (VOC) and other emission pollutants using USEPA methods which are also use by the DENR.
Ambient air sampling & monitoring for sulfur dioxide (SO2), nitrogen dioxide (NO2), total suspended
particles (TSP), heavy metals, hydrogen sulfide (H2S), volatile organic compounds (VOC), and
other measurable pollutants as per US-EPA and DENR methods.
Workplace environment monitoring for sulfur dioxide (SO2), nitrogen dioxide (NO2), total nuisance
dust (TND), Total Respirable Dust (TRD), heavy metals, hydrogen sulfide (H2S), volatile organic
compounds (VOC), noise level, temperature, relative humidity (RH %), ventilation, air velocity and
illumination as per BWC-DOLE & Occupational Health and Safety standard.
Water quality monitoring (surface and groundwater) using in- situ instruments and grab sampling
applying US-EPA and DENR standard.
Repairs, calibrates, maintains and troubleshoots water and air quality sampling equipments
including a variety of pollution monitors.
Participates in agency-witnessed air emissions compliance tests for various types of industry.
REFERENCE:
Available upon request.
Curriculum Vitae of Christian Andrew J. Galicia, BSc EnSE
Page 3