Victorian Purchasing Guide for CPC08 Construction, Plumbing and

Edutrack: 1039768

Victorian Purchasing Guide for

CPC08 Construction, Plumbing and Services

Training Package

Version No 8

March 2013

© State of Victoria (Department of Education and Early Childhood Development) 2013.

Copyright of this material is reserved to the Crown in the right of the State of Victoria. This work is licensed under a Creative Commons Attribution-NoDerivs 3.0 Australia licence

( http://creativecommons.org/licenses/by-nd/3.0/au/ ). You are free use, copy and distribute to anyone in its original form as long as you attribute the Higher Education and Skills Group, Department of Education and

Early Childhood Development as the author, and you license any derivative work you make available under the same licence.

Disclaimer

In compiling the information contained in and accessed through this resource, the Department of Education and Early Childhood Development (DEECD) has used its best endeavours to ensure that the information is correct and current at the time of publication but takes no responsibility for any error, omission or defect therein.

To the extent permitted by law DEECD, its employees, agents and consultants exclude all liability for any loss or damage (including indirect, special or consequential loss or damage) arising from the use of, or reliance on the information contained herein, whether caused or not by any negligent act or omission. If any law prohibits the exclusion of such liability, DEECD limits its liability to the extent permitted by law, for the resupply of the information.

Third party sites

This resource may contain links to third party websites and resources. DEECD is not responsible for the condition or content of these sites or resources as they are not under its control.

Third party material linked from this resource is subject to the copyright conditions of the third party. Users will need to consult the copyright notice of the third party sites for conditions of usage.

Page 2 of 110

Victorian Purchasing Guide



Version History


Version

Date VPG

Approved

Comments

CPC08 V8 29 April

2013

This Victorian Purchasing Guide reflects the changes made to CPC08 Construction and Property Services

Training Package Version 8, which includes the following changes:

1. Addition of two new qualifications:

CPC31712 Certificate III in Post-Tensioning

CPC32912 Certificate III in Construction Crane

Operations.

2. Deletion of four qualifications:

CPC20311 Certificate II in Steelfixing

CPC20411 Certificate II in Concreting

CPC20511 Certificate II in Stoneworking

CPC31711 Certificate III in Low Rise Structural

Framing.

3. Replacement of one or more core units in the following

16 CPC08 qualifications, resulting in an upgrade to year code and non-equivalent status:

CPC20112 Certificate II in Construction

CPC20712 Certificate II in Drainage

CPC20812 Certificate II in Metal Roofing and Cladding

CPC20912 Certificate II in Urban Irrigation

CPC30812 Certificate III in Roof Tiling

CPC31812 Certificate III in Shopfitting

CPC31912 Certificate III in Joinery

CPC32412 Certificate III in Plumbing

CPC32512 Certificate III in Plumbing (Mechanical

Services)

CPC32612 Certificate III in Roof Plumbing

CPC32712 Certificate III in Gas Fitting

CPC32812 Certificate III in Fire Protection

CPC40912 Certificate IV in Plumbing and Services

CPC50412 Diploma of Plumbing and Services

CPC50612 Diploma of Hydraulic Services Design

CPC60212 Advanced Diploma of Building and

Construction (Management)

Review of currency of native and imported units in

CPC08 qualifications, resulting in upgrade of all but one of the remaining qualifications but no change to year code given equivalent status.

Page 3 of 110


Version

Date VPG

Approved

Comments

4. Addition of four new units of competency:

CPCCSI3015A Produce airbrushed signage

CPCCSI3016A Produce digital signage using advanced software applications

CPCPGS3047A Install LPG systems in marine craft

CPCPWT3030A Install home fire sprinkler systems.

5. Replacement of three construction units with the following non-equivalent units:

CPCCBC6018A Manage processes for complying with legal obligations of a building or construction contractor

CPCCCM1016A Identify requirements for safe tilt-up work

CPCCSH3006A Apply finishes.

6. Revision of existing plumbing and services units of competency (CPCP) to reflect industry requirements and sustainability changes resulting in the replacement of 132 plumbing and services units with the revised non-equivalent units.

Refer to the Modification History and Qualification and Unit of Competency Mapping in CPC08 Version 8 for more details.

This guide supersedes the Victorian Purchasing Guide for

CPC08 Version 7 published in May 2012

Page 4 of 110

CONTENTS

CPC08 Construction, Plumbing and Services Training Package

Victorian Purchasing Guide

INTRODUCTION

What is a Victorian Purchasing Guide?

Registration

QUALIFICATIONS

UNITS OF COMPETENCY AND NOMINAL HOURS

SAMPLE TRAINING PROGRAMS

CONTACTS AND LINKS

GLOSSARY

7

9

6

6

6

28

108

110

Page 5 of 110

INTRODUCTION

What is a Victorian Purchasing Guide?

The Victorian Purchasing Guide provides information for use by Registered Training Organisations (RTOs) in the provision of Victorian government subsidised training.

Specifically the Victorian Purchasing Guide provides the following information related to the delivery of nationally endorsed Training Packages in Victoria:





The nominal hour range (minimum-maximum) available for each qualification.

Nominal hours for each unit of competency within the Training Package.



Sample training programs.

Registration

RTOs must be registered by either the Victorian Registration and Qualifications Authority (VRQA) or the

Australian Skills Qualification Authority (ASQA) regulatory body to be eligible to issue qualifications and statements of attainment under the Australian Quality Framework (AQF).

The VRQA is the regulatory authority for Victoria that registers VET training organisations who provide courses to domestic students only and who only offer training in Victoria.

To register to provide training to international students and in other Australian states and territories you will need to apply with ASQA.

Page 6 of 110

CPC31111

CPC31211

CPC31311

CPC31411

CPC31511

CPC31611

CPC31712

CPC31812

CPC31912

CPC32011

CPC32111

CPC32211

CPC32311

CPC10111

CPC20112

CPC20211

CPC20712

CPC20812

CPC20912

CPC30111

CPC30211

CPC30311

CPC30411

CPC30511

CPC30611

CPC30711

CPC30812

CPC30911

CPC31011

QUALIFICATIONS

Code

CPC32412

CPC32512

Title

Certificate I in Construction

Certificate II in Construction

Certificate II in Construction Pathways

Certificate II in Drainage

Certificate II in Metal Roofing and Cladding

Certificate II in Urban Irrigation

Certificate III in Bricklaying/Blocklaying

Certificate III in Carpentry

Certificate III in Concreting

Certificate III in Demolition

Certificate III in Dogging

Certificate III in Painting and Decorating

Certificate III in Rigging

Certificate III in Roof Tiling

Certificate III in Scaffolding

Certificate III in Solid Plastering

Certificate III in Steelfixing

Certificate III in Wall and Ceiling Lining

Certificate III in Wall and Floor Tiling

Certificate III in Construction Waterproofing

Certificate III in Formwork/Falsework

Certificate III in Paving

Certificate III in Post-Tensioning

Certificate III in Shopfitting

Certificate III in Joinery

Certificate III in Carpentry and Joinery

Certificate III in Signage

Certificate III in Joinery (Stairs)

Certificate III in Stonemasonry

(Monumental/Installation)

Certificate III in Plumbing

Certificate III in Plumbing (Mechanical Services)

907

871

1074

534

775

687

684

664

522

542

682

490

624

840

Qualification Nominal Hour Range

Minimum Maximum

290 330

356

200

492

616

301

361

298

834

337

490

334

1084

836

720

410

324

1000

524

462

288

1170

1120

892

508

1142

688

594

476

1265

1212

1310

988

1084

897

936

654

1060

982

814

872

728

702

832

851

2036

1815

Page 7 of 110

CPC40708

CPC40808

CPC40912

CPC50108

CPC50210

CPC50308

CPC50412

CPC50509

CPC50612

CPC60108

CPC60212

CPC70109

Code

CPC32612

CPC32712

CPC32812

CPC32912

CPC40110

CPC40208

CPC40308

CPC40408

CPC40508

CPC40611

Title

Certificate III in Roof Plumbing

Certificate III in Gas Fitting

Certificate III in Fire Protection

Certificate III in Construction Crane Operations

Certificate IV in Building and Construction

(Building)


(Contract Administration)


(Estimating)


(Sales)

Certificate IV in Building and Construction (Site

Management)


(Specialist Trades)


(Trade Contracting)

Certificate IV in Swimming Pool and Spa

Building

Certificate IV in Plumbing and Services

Diploma of Building Surveying

Diploma of Building and Construction (Building)

Diploma of Building and Construction

(Management)

Diploma of Plumbing and Services

Diploma of Fire Systems Design

Diploma of Hydraulic Services Design

Advanced Diploma of Building Surveying

Advanced Diploma of Building and Construction

(Management)

Vocational Graduate Certificate in Fire Systems

Design Management

Qualification Nominal Hour Range

Minimum Maximum

432 487

429

1069

585

1263

732

754

958

900

350

584

330

624

424

489

675

471

1231

1506

545

465

506

1905

2265

510

280

540

790

540

830

914

835

729

1124

1231

2090

1570

2104

1120

2450

2265

1000

360

Page 8 of 110

UNITS OF COMPETENCY AND NOMINAL HOURS

RTOs are advised that there is a mapping table inside each Training Package that describes the relationship between new units and superseded or replaced units from the previous version of CPC08 Construction,

Plumbing and Services Training Package. Information regarding transition arrangements can be obtained from the state or national VET Regulating Authority (see Contacts and Links section).

You must be sure that all training and assessment leading to qualifications or Statements of Attainment from the CPC08 Construction, Plumbing and Services Training Package is conducted against the Training

Package units of competency and complies with the requirements in the assessment guidelines.

Listing of the Units of Competency and Nominal Hours

Unit Code

CPCCBC4001A

CPCCBC4002A

CPCCBC4003A

CPCCBC4004A

CPCCBC4005A

CPCCBC4006B

CPCCBC4007A

CPCCBC4008B

CPCCBC4009B

CPCCBC4010B

CPCCBC4011B

CPCCBC4012B

CPCCBC4013A

CPCCBC4014A

CPCCBC4015A

CPCCBC4016A

CPCCBC4017A

CPCCBC4018A

CPCCBC4019A

CPCCBC4020A

CPCCBC4021A

CPCCBC4022A

Unit Title

Apply building codes and standards to the construction process for low rise building projects

Manage occupational health and safety in the building and construction workplace

Select and prepare a construction contract

Identify and produce estimated costs for building and construction projects

Produce labour and material schedules for ordering

Select, procure and store construction materials for low rise projects

Plan building or construction work

Conduct on-site supervision of building and construction projects

Apply legal requirements to building and construction projects

Apply structural principles to residential low rise constructions

Apply structural principles to commercial low rise constructions

Read and interpret plans and specifications

Prepare and evaluate tender documentation

Prepare simple building sketches and drawings

Prepare specifications for all construction works

Administer a construction contract

Arrange resources and prepare for the building or construction project

Apply site surveys and set-out procedures to building and construction projects

Apply sustainable building design principles to water management systems

Build thermally efficient and sustainable structures

Minimise waste on the building and construction site

Supervise tilt-up work

Nominal

Hours

40

40

40

60

40

40

20

40

20

40

20

20

20

40

50

160

80

30

40

40

40

40

Page 9 of 110

Unit Code

CPCCBC4024A

CPCCBC4025A

CPCCBC4026A

CPCCBC4027B

CPCCBC4028A

CPCCBC4029B

CPCCBC4030A

CPCCBC4031A

CPCCBC4032A

CPCCBC4033A

CPCCBC4034A

CPCCBC4035A

CPCCBC4036A

CPCCBC4037A

CPCCBC4038A

CPCCBC4039A

CPCCBC4040A

CPCCBC4041A

CPCCBC4042A

CPCCBC4043A

CPCCBC4044A

CPCCBC4045A

CPCCBC4046A

CPCCBC4047A

CPCCBC4048A

CPCCBC4049A

CPCCBC4050A

CPCCBC4051A

CPCCBC5001B

CPCCBC5002A

Unit Title

Resolve business disputes

Manage personal work priorities and professional development

Arrange building applications and approvals

Establish a basis for sales consulting

Prepare design brief for construction works

Apply construction information to the sales process

Analyse and communicate industry information

Process client requirements

Apply contract law to sales processes

Maintain the sales environment

Apply codes and standards to building trade and services contracting

Initiate the heritage works process

Prepare to undertake the heritage restoration process

Prepare drawings for heritage works

Prepare work plans for restoration work

Undertake the heritage restoration process

Prepare report for heritage restoration work

Undertake preparations for refractory work

Construct a fire brick wall and arch using refractory materials

Operate a self-erecting tower crane

Operate a tower crane

Perform advanced rigging

Erect and dismantle advanced scaffolding

Quality assure fire-rated lining systems

Apply building codes and standards to the construction process for swimming pools and spas

Apply structural principles to construction of swimming pools and spas

Select, procure and store construction materials for swimming pools and spa projects

Supervise asbestos removal

Apply building codes and standards to the construction process for medium rise building projects

Monitor costing systems on medium rise building and construction projects

Nominal

Hours

40

40

20

40

20

20

40

20

20

20

20

20

20

20

20

20

64

100

40

40

40

20

14

30

40

30

24

8

200

60

Page 10 of 110

Unit Code

CPCCBC5003A

CPCCBC5004A

CPCCBC5005A

CPCCBC5006B

CPCCBC5007B

CPCCBC5009A

CPCCBC5010B

CPCCBC5011A

CPCCBC5012A

CPCCBC5013A

CPCCBC5014A

CPCCBC5018A

CPCCBC6001B

CPCCBC6002A

CPCCBC6003A

CPCCBC6005A

CPCCBC6006A

CPCCBC6007A

CPCCBC6008A

CPCCBC6009A

CPCCBC6010A

CPCCBC6011A

CPCCBC6012A

Unit Title

Supervise the planning of on-site medium rise building or construction work

Supervise and apply quality standards to the selection of building and construction materials

Select and manage building and construction contractors

Apply site surveys and set-out procedures to medium rise building projects

Administer the legal obligations of a building or construction contractor

Identify services layout and connection methods to medium rise construction projects

Manage construction work

Manage environmental management practices and processes in building and construction

Manage the application and monitoring of energy conservation and management practices and processes

Develop professional technical and legal reports on building and construction projects

Conduct asbestos assessment associated with removal

Apply structural principles to the construction of medium rise buildings

Apply building codes and standards to the construction process for large building projects

Generate and direct the development of new projects

Establish, maintain and review contract administration procedures and frameworks

Manage tender developments for major projects

Manage the procurement and acquisition of resources for building or construction projects

Develop, plan and implement appropriate building or construction environmental management practices and processes

Develop and implement an appropriate estimating and tendering system

Develop, plan and implement an appropriate building or construction planning process

Plan, develop and implement building or construction energy conservation and management practices and processes

Establish systems to develop and monitor building and construction costs

Manage and administer development of documentation for building or construction projects

Nominal

Hours

200

60

40

110

100

140

150

150

150

40

40

300

100

200

60

50

50

50

60

50

200

80

40

Page 11 of 110

Unit Code

CPCCBC6013A

CPCCBC6014A

CPCCBC6015A

CPCCBC6016A

CPCCBC6017A

CPCCBC6018A

CPCCBL2001A

CPCCBL2002A

CPCCBL3001A

CPCCBL3002A

CPCCBL3003A

CPCCBL3004A

CPCCBL3005A

CPCCBL3006A

CPCCBL3007A

CPCCBL3009A

CPCCBL3010A

CPCCBL3011A

CPCCBL3012A

CPCCBL3013A

CPCCBL3014A

CPCCBL3015A

CPCCBL3016A

CPCCBL3017A

CPCCBL3018A

CPCCCA2002B

CPCCCA2003A

CPCCCA2011A

CPCCCA3001A

CPCCCA3002A

CPCCCA3003A

Unit Title

Evaluate materials for multi-storey buildings

Apply structural principles to the construction of large, high rise and complex buildings

Apply building surveying procedures

Assess construction faults in large building projects

Evaluate services layout and connection methods for the planning of large building projects

Manage processes for complying with legal obligations of a building or construction contractor

Handle and prepare bricklaying and blocklaying materials

Use bricklaying and blocklaying tools and equipment

Lay paving

Carry out masonry veneer construction

Carry out cavity brick construction

Construct masonry steps and stairs

Lay masonry walls and corners

Lay multi-thickness walls and piers

Install glass blockwork

Install flashings and damp proof course

Construct masonry arches

Construct curved walls

Construct fireplaces and chimneys

Construct masonry structural systems

Install fire-rated masonry construction

Construct decorative brickwork

Construct battered masonry walls and piers

Carry out tuck pointing to brickwork

Install aerated autoclaved concrete products

Use carpentry tools and equipment

Erect and dismantle formwork for footings and slabs on ground

Handle carpentry materials

Carry out general demolition of minor building structures

Carry out setting out

Install flooring systems

Nominal

Hours

60

100

50

50

100

60

48

40

32

70

8

8

100

32

60

32

76

60

16

30

24

60

24

16

32

24

40

32

12

40

96

Page 12 of 110

Unit Code Unit Title

CPCCCA3004A

CPCCCA3005B

Construct wall frames

Construct ceiling frames

CPCCCA3006B Erect roof trusses

CPCCCA3007C Construct pitched roofs

CPCCCA3008B

CPCCCA3009B

CPCCCA3010A

CPCCCA3011A

Construct eaves

Construct advanced roofs

Install and replace windows and doors

Refurbish timber sashes to window frames

CPCCCA3012A

CPCCCA3013A

CPCCCA3014A

CPCCCA3015A

CPCCCA3016A

CPCCCA3017B

CPCCCA3018A

CPCCCA3019A

CPCCCA3020A

Frame and fit wet area fixtures

Install lining, panelling and moulding

Construct bulkheads

Assemble partitions

Construct timber external stairs

Install exterior cladding

Construct, erect and dismantle formwork for stairs and ramps

Erect and dismantle formwork to suspended slabs, columns, beams and walls

Erect and dismantle jump form formwork

CPCCCA3021A Erect and dismantle slip form formwork

CPCCCA3022A

CPCCCA3023A

Install curtain walling

Carry out levelling operations

CPCCCM1011A Undertake basic estimation and costing

CPCCCM1012A Work effectively and sustainably in the construction industry

CPCCCM1013A Plan and organise work

CPCCCM1014A Conduct workplace communication

CPCCCM1015A Carry out measurements and calculations

CPCCCM1016A Identify requirements for safe tilt-up work

CPCCCM2001A Read and interpret plans and specifications

CPCCCM2002A Carry out excavation

CPCCCM2003B Calculate and cost construction work

CPCCCM2004A Handle construction materials

CPCCCM2005B Use construction tools and equipment

Page 13 of 110

Nominal

Hours

40

20

40

40

24

40

16

32

20

80

70

16

60

32

40

60

16

20

20

20

20

8

36

16

20

16

96

60

60

40

24


CPCCCM2006B Apply basic levelling procedures

CPCCCM2007B Use explosive power tools

CPCCCM2008B Erect and dismantle restricted height scaffolding

CPCCCM2009A Carry out basic demolition

CPCCCM2010B Work safely at heights

CPCCCM3001C Operate elevated work platforms

CPCCCM3002A Operate a truck mounted loading crane

CPCCCM3003A Work safely around power sources, services and assets

CPCCCO2011A Handle concreting materials

CPCCCO2012A Use concreting tools and equipment

CPCCCO2013A Carry out concreting to simple forms

CPCCCO2014A Carry out concrete work

CPCCCO3021A Place concrete

CPCCCO3022A Finish concrete

CPCCCO3023A Cure concrete

CPCCCO3024A Carry out decorative finishes to concrete

CPCCCO3025A Resurface concrete

CPCCCO3026A Carry out repair and rectification of concrete

CPCCCO3027A Cut and core concrete

CPCCCO3028A Carry out tilt panel construction

CPCCCO3029A Apply and finish sprayed concrete

CPCCCO3030A Carry out high performance concreting

CPCCCO3031A Conduct off-form vertical concrete operations

CPCCCO3032A Conduct concrete boom delivery operations

CPCCCO3033A Slump test concrete

CPCCCO3034A Conduct concrete agitator truck operations

CPCCDE2011A

CPCCDE2012A

Use demolition tools and equipment

Carry out manual general demolition

CPCCDE3011A

CPCCDE3013A

CPCCDE3014A

CPCCDE3015A

Carry out mechanical general demolition

Operate a crushing plant

Remove non-friable asbestos

Remove friable asbestos

CPCCDO2011A Handle and use dogging tools and equipment

Page 14 of 110

Nominal

Hours

24

30

20

30

8

40

40

40

40

16

16

32

160

16

36

16

32

180

180

16

32

24

80

20

120

8

32

40

40

8

16

40

32


CPCCDO3011A Perform dogging

CPCCDO3012A Perform crane scheduling

CPCCJN2001A

CPCCJN2002A

Assemble components

Prepare for off-site manufacturing process

CPCCJN2003A

CPCCJN3001A

CPCCJN3002A

CPCCJN3003A

Package manufactured products for transport

Use static machines

Use computer-controlled machinery

Manufacture components for door and window frames and doors

CPCCJN3004A

CPCCJN3005A

CPCCJS3002A

CPCCJS3003A

CPCCJS3004A

Manufacture joinery components

Cut and install glass

Manufacture stair components for straight flighted stairs

Assemble and install stairs

Manufacture and install continuous handrailing and special stair components

CPCCJS3005A

CPCCJS3006A

Manufacture stair components for curved and geometric stairs

Construct fabricated stairs

CPCCJS3011A Design and set out stairs

CPCCLBM3001A Licence to operate a concrete placing boom

CPCCLDG3001A Licence to perform dogging

CPCCLHS3001A Licence to operate a personnel and materials hoist

CPCCLHS3002A Licence to operate a materials hoist

CPCCLRG3001A Licence to perform rigging basic level

CPCCLRG3002A Licence to perform rigging intermediate level

CPCCLRG4001A Licence to perform rigging advanced level

CPCCLSF2001A Licence to erect, alter and dismantle scaffolding basic level

CPCCLSF3001A Licence to erect, alter and dismantle scaffolding intermediate level

CPCCLSF4001A Licence to erect, alter and dismantle scaffolding advanced level

CPCCLTC4001A Licence to operate a tower crane

CPCCLTC4002A Licence to operate a self-erecting tower crane

CPCCOHS1001A Work safely in the construction industry

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

CPCCPA3001A Prepare subgrade, base and bedding course for segmental paving

Nominal

Hours

10

56

60

80

80

40

32

32

40

16

32

24

56

16

40

40

80

6

20

40

40

40

40

80

32

24

196

56

24

24

160

Page 15 of 110

Unit Code

CPCCPB3013A

CPCCPB3014A

CPCCPB3015A

CPCCPB3016A

CPCCPB3017A

CPCCPB3018A

CPCCPB3019A

CPCCPB3020A

CPCCPB3021A

CPCCPB3022A

CPCCPB3023A

CPCCPB3024A

CPCCPB3025A

CPCCPB3026B

CPCCPB3027A

CPCCPD2011A

CPCCPA3002A

CPCCPA3003A

CPCCPA3004A

CPCCPA3005A

CPCCPB3001A

CPCCPB3002A

CPCCPB3003A

CPCCPB3004A

CPCCPB3005A

CPCCPB3006A

CPCCPB3007A

CPCCPB3008A

CPCCPB3009A

CPCCPB3010A

CPCCPB3011A

CPCCPB3012A

Unit Title

Lay segmental pavers

Cut segmental pavers

Finish segmental paving

Maintain and repair segmental paving

Fix standard plasterboard wall sheets

Fix standard plasterboard ceiling sheets

Fix battens

Fix wet area sheets

Fix ceiling sheets to external protected areas

Fix fibre cement board

Apply levels of finish standards to planning and inspection of own work

Mix plastering compounds

Finish plasterboard joins manually

Manually sand plaster work

Finish category 1 and 2 wet areas

Cut and fix paper-faced cornices

Plan travel routes

Install batt insulation products

Install acoustic and thermal environmental protection systems

Install and finish columns

Rectify faults in plaster applications

Use vacuum and electric sanding equipment to finish plaster work

Inspect equipment for serviceability

Match, mitre and install cast ornamental cornices

Install and fix residential acoustic plaster products

Use mechanical jointing equipment to finish joints

Load and unload plaster and plaster-related products

Use manual handling equipment to manoeuvre plaster products

Store plasterboard and related products

Erect and maintain trestle and plank systems

Install ceiling insulation

Handle painting and decorating materials

Nominal

Hours

10

10

30

16

40

60

6

10

20

60

10

60

10

16

20

16

60

16

20

40

40

20

40

20

60

60

20

20

40

8

8

12

Page 16 of 110

Unit Code

CPCCPD3032A

CPCCPD3033A

CPCCPD3034A

CPCCRI3001A

CPCCRI3012A

CPCCRI3013A

CPCCRI3014A

CPCCRI3015A

CPCCRI3016A

CPCCRT2001A

CPCCRT2002A

CPCCRT3001A

CPCCRT3002A

CPCCRT3003B

CPCCRT3004B

CPCCRT3005B

CPCCRT3006B

CPCCSC2001A

CPCCSC2002A

CPCCPD2012A

CPCCPD2013A

CPCCPD3021A

CPCCPD3022A

CPCCPD3023A

CPCCPD3024A

CPCCPD3025A

CPCCPD3026A

CPCCPD3027A

CPCCPD3028A

CPCCPD3029A

CPCCPD3030B

CPCCPD3031A

Unit Title

Use painting and decorating tools and equipment

Remove and replace doors and door and window components

Prepare surfaces for painting

Apply paint by brush and roller

Apply texture coat paint finishes by brush, roller and spray

Apply paint by spray

Match specified paint colour

Apply stains and clear timber finishes

Apply wallpaper

Apply decorative paint finishes

Remove graffiti and apply protective coatings

Apply protective paint coating systems

Implement safe lead paint and asbestos work practices in the painting industry

Apply advanced wallpaper techniques

Apply intumescent coatings

Apply advanced decorative paint finishes

Operate personnel and materials hoists

Perform basic rigging

Perform intermediate rigging

Perform advanced structural steel erection

Perform advanced tilt-up slab erection

Perform advanced tower crane erection

Handle roof tiling materials

Use roof tiling tools and equipment

Tile regular roofs

Tile irregular roofs

Repair and replace valleys, valley irons and flashings

Repair and renovate tile roofs

Slate a roof

Fix shingles to roofs and facades

Safely handle and use scaffolding tools and equipment

Erect and dismantle basic scaffolding

Nominal

Hours

40

80

50

40

80

4

40

100

50

114

30

30

20

84

8

20

48

16

16

16

48

24

8

56

40

40

24

24

30

50

40

32

Page 17 of 110


CPCCSC3001A

CPCCSF2001A

CPCCSF2002A

CPCCSF2003A

CPCCSF2004A

CPCCSF2005A

CPCCSF2006A

CPCCSF2007A

CPCCSF3001A

CPCCSF3002A

CPCCSF3003A

CPCCSF3004A

CPCCSH2001A

CPCCSH2002A

CPCCSH2003A

CPCCSH3001A

CPCCSH3002A

CPCCSH3003A

CPCCSH3005A

CPCCSH3006A

CPCCSI2001A

CPCCSI2002A

CPCCSI2003A

CPCCSI2004A

CPCCSI2005A

CPCCSI2006A

CPCCSI2007A

CPCCSI3001A

CPCCSI3002A

CPCCSI3003A

CPCCSI3004A

Erect and dismantle intermediate scaffolding

Handle steelfixing materials

Use steelfixing tools and equipment

Cut and bend materials using oxy-LPG equipment

Place and fix reinforcement materials

Arc weld reinforcement steel

Machine cut reinforcement materials

Splice and anchor using mechanical methods

Apply reinforcement schedule

Carry out monostrand post-tensioning

Carry out multistrand post-tensioning

Carry out stressbar post-tensioning

Prepare surfaces

Use aluminium sections for fabrication

Apply and install sealant and sealant devices

Set out and assemble cabinets, showcases, wall units, counters and workstations

Set out and fabricate shopfront commercial entries bulkheads and component fittings

Assemble and install shopfront commercial entries bulkheads and components

Apply and trim decorative finishes

Apply finishes

Use colour for signage

Lay out and design signage

Prepare surfaces for signage

Produce digital signage

Fabricate signage

Signwrite to simple forms

Apply fasteners and fixings

Produce vinyl signage

Use rotary router

Signwrite to decorative forms

Apply advanced vinyl applications

Page 18 of 110

56

40

20

36

40

76

40

15

24

40

16

36

20

92

40

Nominal

Hours

32

40

16

80

16

40

40

20

80

40

20

50

56

24

80

20


CPCCSP3002A

CPCCSP3003A

CPCCSP3004A

CPCCSP3005A

CPCCSP3006A

CPCCSP3007A

CPCCST2001A

CPCCST2002A

CPCCST2003A

CPCCST2004A

CPCCST2005A

CPCCST3001A

CPCCST3002A

CPCCST3003A

CPCCST3004A

CPCCST3005A

CPCCSI3005A

CPCCSI3006A

CPCCSI3007A

CPCCSI3008A

CPCCSI3009A

CPCCSI3010A

CPCCSI3011A

CPCCSI3012A

CPCCSI3013A

CPCCSI3014A

CPCCSI3015A

CPCCSI3016A

CPCCSP2001A

CPCCSP2002A

CPCCSP2003A

CPCCSP3001A

Use engraving systems

Apply gilding to signage

Apply lines and scrolls

Write showcards and chalkboards

Screen-print signage

Hand render pictorials

Use LED technology for signage

Apply electrical theory for illuminated signage

Install LED systems

Manufacture gas-charged glass-formed illuminated signage

Produce airbrushed signage

Produce digital signage using advanced software applications

Handle solid plastering materials

Use solid plastering tools and equipment

Prepare surfaces for plastering

Apply float and render to straight and curved surfaces

Apply set coats

Apply trowelled texture coat finishes

Restore and renovate solid plasterwork

Install pre-cast decorative mouldings

Install cast plaster blockwork

Apply plaster by projection machine

Prepare for stonemasonry construction process

Identify and use stone products

Finish stone

Lay stone

Carry out load slinging of off-site materials

Dress and mould stone

Shape solid stone

Split stone manually

Dress stone manually

Carry out profile work

Page 19 of 110

Nominal

Hours

40

20

40

60

30

40

8

10

16

32

25

8

40

80

120

120

8

80

40

100

40

200

20

60

36

36

40

8

40

40

48

36

Unit Code

CPCCST3006A

CPCCST3007A

CPCCST3008A

CPCCST3009A

CPCCST3010A

CPCCST3011A

CPCCST3012A

CPCCST3013A

CPCCST3014A

CPCCSV5001A

CPCCSV5002A

CPCCSV5003A

CPCCSV5004A

CPCCSV5005A

CPCCSV5006A

CPCCSV5007A

CPCCSV5008A

CPCCSV5009A

CPCCSV5010A

CPCCSV5011A

CPCCSV5012A

CPCCSV5013A

CPCCSV5014A

CPCCSV5015A

CPCCSV6001A

CPCCSV6002A

CPCCSV6003A

CPCCSV6004A

CPCCSV6005A

CPCCSV6006A

Unit Title

Machine stone

Turn stone

Inlay lead to stone

Use computer-controlled static machinery to produce stone components

Set out and cut letters in stone

Plan monument construction

Build stone veneer walls

Carry out cemetery monument fixing

Set and anchor stone facades

Assess the construction of domestic scale buildings

Evaluate materials for construction of domestic scale buildings

Produce working drawings for residential buildings

Apply legislation to urban development and building controls

Apply footing and geomechanical design principles to domestic scale buildings

Assess construction faults in residential buildings

Undertake site surveys and set-out procedures for building projects

Apply building control legislation to building surveying

Assess the impact of fire on building materials

Interact with clients in a regulated environment

Apply building codes and standards to residential buildings

Assess timber-framed designs for one and two storey buildings

Apply principles of energy efficient design to buildings

Apply building surveying procedures to residential buildings

Assess structural requirements for domestic scale buildings

Assess the construction of buildings up to three storeys

Produce working drawings for buildings up to three storeys

Assess construction faults in buildings up to three storeys

Apply footing and geomechanical design principles to buildings up to three storeys

Evaluate services layout and connection methods for residential and commercial buildings up to three storeys

Evaluate the use of concrete for residential and commercial buildings up to three storeys

Page 20 of 110

Nominal

Hours

40

32

20

32

40

40

32

100

72

90

32

12

32

32

36

36

36

72

72

40

40

40

36

36

36

36

36

72

36

36


CPCCSV6007A

CPCCSV6008A

CPCCSV6009A

CPCCSV6010A

CPCCSV6011A

CPCCSV6012A

CPCCSV6013A

CPCCSV6014A

CPCCSV6015A

CPCCSV6016A

CPCCVE1002B

Assess structural requirements for buildings up to three storeys

Apply building codes and standards to buildings up to three storeys

Implement performance-based codes and risk management principles for buildings up to three storeys

Apply fire technology to buildings up to three storeys

Apply legal procedures to building surveying

Facilitate community development consultation

Coordinate building refurbishment

Manage and plan land use

Analyse and present building surveying research information

Apply building surveying procedures to buildings up to three storeys

Undertake a basic computer design project

CPCCVE1011A Undertake a basic construction project

CPCCWC2001A Complete penetrations and flashings

CPCCWC3001A Install and finish plasterboard and fibre cement sheeting to curved walls and ceilings

CPCCWC3002A Install and finish plasterboard and fibre cement sheeting to arches

CPCCWC3003A Install dry wall passive fire-rated systems

CPCCWC3004A Install suspended ceilings

CPCCWF2001A Handle wall and floor tiling materials

CPCCWF2002A Use wall and floor tiling tools and equipment

CPCCWF3001A Prepare surfaces for tiling application

CPCCWF3002A Fix floor tiles

CPCCWF3003A Fix wall tiles

CPCCWF3004A Repair wall and floor tiles

CPCCWF3005A Carry out decorative tiling

CPCCWF3006A Carry out mosaic tiling

CPCCWF3007A Tile curved surfaces

CPCCWF3008A Tile domestic pools and spas

CPCCWP2001A Handle waterproofing materials

CPCCWP2002A Use waterproofing tools and equipment

CPCCWP2003A Prepare for construction waterproofing process

CPCCWP2004A Prepare surfaces for waterproofing application

Nominal

Hours

40

72

72

40

90

90

36

40

40

40

72

40

20

40

100

24

60

100

100

40

40

40

80

96

40

120

140

60

40

40

32

Page 21 of 110


CPCCWP3001A Apply waterproofing process to below ground level wet areas

CPCCWP3002A Apply waterproofing process to internal wet areas

CPCCWP3003A Apply waterproofing process to external wet areas

CPCCWP3004A Apply waterproofing remedial processes

CPCMCM7001A Plan and manage complex projects

CPCMCM7002A Manage the quality of projects and processes

CPCPCM2039A Carry out interactive workplace communication

CPCPCM2040A Read plans and calculate plumbing quantities

CPCPCM2041A Work effectively in the plumbing and services sector

CPCPCM2043A Carry out WHS requirements

CPCPCM2045A Handle and store plumbing materials

CPCPCM2046A Use plumbing hand and power tools

CPCPCM2047A Carry out levelling

CPCPCM2048A Cut and join sheet metal

CPCPCM2049A Cut using oxy-LPG-acetylene equipment

CPCPCM2050A Mark out materials

CPCPCM2052A Weld using oxy-acetylene equipment

CPCPCM2053A Weld using manual metal arc welding equipment

CPCPCM2054A Carry out simple concreting and rendering

CPCPCM2055A Work safely on roofs

CPCPCM3021A Flash penetrations through roofs and walls

CPCPCM3022A Weld polyethylene and polypropylene pipes using fusion method

CPCPCM3023A Fabricate and install non-ferrous pressure piping

CPCPCM4011A Carry out work-based risk control processes

CPCPCM4012A Estimate and cost work

CPCPCM4013A Produce 2-D architectural drawings using CAD software

CPCPCM4014A Prepare simple sketches and drawings

CPCPCM5010A Design complex sanitary plumbing and drainage systems

CPCPCM5011A Design complex cold water systems

CPCPCM5012A Design complex stormwater and roof drainage systems

CPCPCM5013A Design complex (non-solar) heated water systems

CPCPCM5014A Design sewer infrastructure systems

Page 22 of 110

Nominal

Hours

70

55

75

90

40

40

20

70

18

8

12

24

16

16

16

20

6

8

8

20

15

50

6

40

60

80

10

8

50

50

50

50


CPCPDR2021A

CPCPDR2022A

CPCPDR2023A

CPCPDR2024A

CPCPDR2025A

CPCPDR2026A

CPCPDR3021A

CPCPDR3022A

CPCPDR3023A

CPCPDR4011B

CPCPDR4012B

CPCPDR4013B

CPCPFS2021A

CPCPFS2022A

CPCPFS3030A

CPCPFS3031A

CPCPFS3032A

CPCPFS3033A

CPCPFS3034A

CPCPFS3035A

CPCPFS3036A

CPCPFS3037A

CPCPFS3038A

CPCPFS3039A

CPCPFS3040A

CPCPFS3041A

CPCPFS3042A

CPCPFS3043A

CPCPFS4021A

CPCPFS4022A

CPCPFS4023A

Locate and clear blockages

Install domestic treatment plants

Maintain effluent disinfection systems

Install stormwater and sub-soil drainage systems

Drain work site

Install prefabricated inspection openings and enclosures

Plan layout of a residential sanitary drainage system

Install below ground sanitary drainage systems

Install on-site disposal systems

Design and size sanitary drainage systems

Design and size stormwater drainage systems

Design and size domestic treatment plant disposal systems

Connect static storage tanks for fixed fire protection systems

Install portable fire equipment

Design pre-calculated fire sprinkler systems

Fabricate and install fire hydrant and hose reel systems

Install distribution and range pipes

Fit off sprinkler heads, controls and ancillary equipment

Install control valve assemblies, actuating devices and local alarms

Test fire protection systems for pressure

Install special hazard systems

Install domestic and residential life safety sprinkler systems

Test and maintain fire hydrant and hose reel installations

Test and maintain automatic fire sprinklers

Conduct basic functional testing of water-based fire-suppression systems

Inspect and test fire pumpsets

Conduct annual functional testing of complex water-based firesuppression systems

Conduct functional water flow testing

Commission domestic and residential fire suppression sprinkler systems

Commission and maintain special hazard fire suppression systems

Commission fire system pumpsets

Page 23 of 110

Nominal

Hours

60

24

60

40

8

40

45

35

5

4

8

30

8

20

4

15

45

60

60

60

40

80

40

100

16

40

60

32

16

20

16


CPCPFS4024A

CPCPFS4025A

CPCPFS4026A

CPCPFS5010A

CPCPFS5011A

CPCPFS5012A

CPCPGS3046A

CPCPGS3047A

CPCPGS3048A

CPCPGS3049A

CPCPGS3050A

CPCPGS3051A

CPCPGS3052A

CPCPGS3053A

CPCPGS3054A

CPCPGS3055A

Design residential and domestic fire sprinkler systems

Commission fire alarm and detection system interface devices

Commission firefighting appliances

Design fire-compliant hydraulic services

Design fire sprinkler systems

Design fire hydrant and hose reel systems

Install LPG systems in caravans, mobile homes and mobile workplaces

Install LPG systems in marine craft

Install gas pressure control equipment

Install Type A gas appliance flues

Install Type B gas appliance flues

Purge consumer piping

Maintain Type A gas appliances

Disconnect and reconnect Type A gas appliances

Calculate and install natural ventilation for Type A gas appliances

Install gas sub-meters

CPCPGS3056A

CPCPGS3057A

CPCPGS3058A

CPCPGS3059A

CPCPGS3060A

CPCPGS4011B

CPCPGS4022A

CPCPGS4023A

CPCPIG2021A

Install gas piping systems

Size consumer gas piping systems

Install and commission Type A gas appliances

Install LPG storage of aggregate storage capacity up to 500 litres

Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8KL

Design and size consumer gas installations

Service Type A gas appliances

Install, commission and service Type B gas appliances

Design domestic urban irrigation systems

CPCPIG3021A

CPCPIG3022A

Set out, install and commission irrigation systems

Install and commission domestic irrigation pumps

CPCPMS2021A Assemble mechanical services components

CPCPMS3031A Fabricate and install steel pressure piping

CPCPMS3032A Select and fit insulation and sheathing

CPCPMS3033A Install small bore heating systems

CPCPMS3034A Install medical gas pipeline systems

Nominal

Hours

12

16

8

8

8

12

4

8

24

8

22

4

6

440

384

12

12

50

60

64

340

4

4

12

54

60

180

138

5

8

15

24

Page 24 of 110


CPCPPS5002B

CPCPPS5009B

CPCPPS5011B

CPCPPS5014A

CPCPPS5015B

CPCPPS5023A

CPCPPS5024A

CPCPPS5025A

CPCPPS5026A

CPCPPS5027A

CPCPPS5028A

CPCPPS5030A

CPCPPS5032A

CPCPPS5033A

CPCPRF2022A

CPCPRF2023A

CPCPRF2024A

CPCPMS3035A Install and test ducting systems

CPCPMS3036A Install air handling units

CPCPMS3037A Install and test split system air conditioning

CPCPMS3038A Install air conditioning control equipment

CPCPMS3039A Maintain mechanical services equipment

CPCPMS3040A Install and maintain evaporative air cooling systems

CPCPMS3041A Install domestic solid fuel burning appliances

CPCPMS4011B Design, size and lay out heating and cooling systems

CPCPMS4022A Commission air and water systems

CPCPMS4023A Design compressed air systems

CPCPMS5010A Design steam generation and distribution systems

CPCPMS5011A Design air conditioning and ventilation systems

CPCPMS5012A Design sound attenuated hydraulic services

CPCPMS5013A Design hydronic heating and cooling systems

CPCPPS5000B

CPCPPS5001B

Design gas bulk storage systems

Design industrial gas systems

Design gas reticulation systems

Analyse and report on technical plumbing systems

Coordinate services and penetrations within a building

Locate and maintain piping systems

Inspect plumbing and drainage systems

Design solar water heating systems

Conduct a water audit and identify water-saving initiatives

Design grey water re-use systems in sewered areas

Design rainwater collection, storage, distribution and re-use systems

Design irrigation systems

Design trade waste pre-treatment systems

Design pump systems

Design siphonic stormwater drainage systems

Design vacuum sewerage systems

Select and install roof sheeting and wall cladding

Collect and store roof water

Fabricate roof coverings for curved structures

Page 25 of 110

Nominal

Hours

30

35

16

10

8

35

35

30

30

32

45

35

35

160

20

40

8

45

90

80

300

132

40

50

50

8

20

20

160

12

12

15

8


CPCPRF3021A

CPCPRF3022A

CPCPRF3023A

CPCPRF3024A

CPCPRF3025A

CPCPRF3026A

CPCPRF4011B

CPCPSN3011B

Receive roofing materials

Fabricate and install roof drainage components

Fabricate and install external flashings

Install roof components

Install roof coverings to curved roof structures

Install composite roof systems

Design and size roof drainage systems

Plan layout of a residential sanitary plumbing system

CPCPSN3022A

CPCPSN3023A

CPCPSN3024A

CPCPSN3025A

Install discharge pipes

Fabricate and install sanitary stacks

Install and fit off sanitary fixtures

Install pre-treatment facilities

CPCPSN3026A

CPCPSN4011B

Install sewerage pumpsets

Design and size sanitary plumbing systems

CPCPWT3020A Connect and install storage tanks to a domestic water supply

CPCPWT3021A Set out and install water services

CPCPWT3022A Install and adjust water service controls and devices

CPCPWT3023A Install and commission water heating systems

CPCPWT3024A Install and maintain domestic water treatment equipment

CPCPWT3025A Install water pumpsets

CPCPWT3026A Fit off and commission heated and cold water services

CPCPWT3027A Connect irrigation systems from drinking water supply

CPCPWT3028A Install water services

CPCPWT3029A Install water pipe systems

CPCPWT3030A Install home fire sprinkler systems

CPCPWT4011B Design and size heated and cold water services and systems

CPCPWT4022A Commission and maintain backflow prevention devices

CPCPWT4023A Commission and maintain hot and heated water temperature control devices

CPCSFS5001A

CPCSFS5002A

Define scope and hazard level of fire systems design projects

Research and interpret detailed fire systems design project requirements

CPCSFS5003A Develop plans and methodology for fire systems design projects

Nominal

Hours

16

6

10

12

12

25

10

8

50

80

20

20

8

50

12

36

28

28

20

8

12

20

60

8

4

48

16

10

40

40

40

Page 26 of 110

Unit Code

CPCSFS5005A

CPCSFS5006A

CPCSFS5007A

CPCSFS5008A

CPCSFS5009A

CPCSFS5010A

CPCSFS5011A

CPCSFS5013A

CPCSFS5014A

CPCSFS5015A

CPCSFS7001A

CPCSFS7002A

CPCSFS7003A

CPCSUS4001A

CPCSUS5001A

Unit Title

Research and evaluate fire system technologies and components

Create detailed designs for fire sprinkler systems

Create detailed designs for hydrant and hose reel systems

Create detailed designs for fire detection and warning systems

Create detailed designs for fire systems’ water supplies

Provide documentation and support for fabrication of fire sprinkler systems

Provide design documentation and review and support fire system installation processes

Support commissioning processes and finalise fire systems design projects

Conduct annual fire systems certification inspections

Assess documentation for annual fire systems certification inspections

Define scope of and initiate special hazard fire systems design projects

Analyse, design and evaluate complex special hazard fire systems

Develop and submit tenders for fire systems design solutions

Implement and monitor environmentally sustainable work practices

Develop workplace policies and procedures for sustainability

Nominal

Hours

60

120

80

120

120

60

60

80

100

60

140

80

60

40

50

Page 27 of 110

SAMPLE TRAINING PROGRAMS

A range of Sample Training Plans have been provided to demonstrate the flexibility of qualifications contained in the CPC08 Construction, Plumbing and Services Training Package , but are by no means mandatory.

Occupation/ Work

Function

Plumbing Drainer

Qualification Title Certificate II in Drainage

Qualification Code CPC20712

Description This sample training program is appropriate for a person working in the plumbing industry as a drainer.

Notes For further information on choosing electives refer to the qualification structures and rules within the (CPC08) Construction, Plumbing and Services Training

Package.

Participants who wish to obtain limited registration in drainage in Victoria should contact the Plumbing Industry Commission for advice on Competencies for

Registration – Drainage Work (see Industry Regulation section at rear of guide).

This sample program is based on CPC08 V6.1 and V7.0.

Unit Title Hours Unit Code

Core

CPCPCM2039A

CPCPCM2040A

CPCPCM2041A

CPCPCM2043A

CPCPCM2045A

CPCPCM2046A

CPCPCM2047A

CPCPCM2054A

CPCPDR2021A

CPCPDR2022A

CPCPDR2024A

CPCPDR2025A

CPCPDR2026A

CPCPDR3021A

CPCPDR3022A

CPCPDR3023A

HLTFA211A

RIICCM210A

Carry out interactive workplace communication

Read plans and calculate plumbing quantities

Work effectively in the plumbing and services sector

Carry out WHS requirements

Handle and store plumbing materials

Use plumbing hand and power tools

Carry out levelling

Carry out simple concreting and rendering




Drain work site





Provide basic emergency life support

Install trench support

10

8

15

50

6

40

6

16

8

20

15

5

4

8

30

8

8

16

Page 28 of 110

Unit Code

Electives

CPCPDR2023A

CPCPCM2048A

CPCPCM2049A

CPCPCM3022A

CPCPSN3025A

CPCPRF2023A

CPCPWT3029A

CPCPCM2052A

CPCPCM2053A

CPCPCM2050A

Unit Title Hours


Cut and join sheet metal

Cut using oxy-LPG-acetylene equipment

Weld polyethylene and polypropylene pipes using fusion method



Install water pipe systems

Weld using oxy-acetylene equipment

Weld using manual metal arc welding equipment

Mark out materials

Total hours

8

10

12

16

8

8

4

8

16

20

383

Page 29 of 110


Function

Irrigation Technician

Qualification Title Certificate II in Urban Irrigation


Description

Notes

This sample training program is appropriate for a person working in the plumbing industry as an urban irrigator restricted to installing and maintaining sprinklers and irrigation systems in domestic and light commercial sites.

For further information on choosing electives refer to the qualification structures and rules within the (CPC08) Construction, Plumbing and Services Training

Package.

Participants who wish to obtain limited registration in urban irrigation in Victoria should contact the Plumbing Industry Commission for advice on Competencies for Registration – Irrigation (non-agricultural) Work (see Industry Regulation section at rear of guide). This sample program is based on CPC08 V6.1 and

V7.0.


Core

CPCPCM2039A

CPCPCM2040A

CPCPCM2041A

CPCPCM2043A

CPCPCM2045A

CPCPCM2046A

CPCPCM2050A

CPCPCM2054A

CPCPFS2021A

CPCPIG2021A

CPCPIG3021A

CPCPIG3022A

HLTFA211A

Electives







Mark out materials





Install and commission domestic irrigation pumps


10

8

15

50

6

40

20

16

60

5

4

4

8

CPCCST2005A

CPCPCM2047A

CPCPCM2048A

CPCPCM2049A

CPCPCM2052A

CPCPCM2053A

CPCPCM3022A


Carry out levelling






16

16

8

8

8

8

6

Page 30 of 110

Unit Code

CPCPRF2023A

CPCPWT3025A

CPCPWT3027A

CPCPWT3028A

CPCPWT3029A

RIICCM210A

Unit Title


Install water pumpsets

Connect irrigation systems from drinking water supply

Install water services



Total hours

Hours

10

8

6

10

12

16

378

Page 31 of 110


Function

Bricklayer/Blocklayer

Qualification Title Certificate III in Bricklaying/Blocklaying


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working in the bricklaying/blocklaying sector.

The following training program is a sample only. For further information on choosing electives refer to the qualification structures and rules within the

(CPC08) Construction, Plumbing and Services Training Package . This sample program is based on CPC08 V6.1 and V7.0


CPCCCA3002A

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A


Work effectively and sustainably in the construction industry

Plan and organise work

Conduct workplace communication

24

20

20

20

CPCCCM1015A

CPCCCM2001A

CPCCCM2006B

CPCCCM2008B

CPCCCM2009A

CPCCOHS2001A

Carry out measurements and calculations


Apply basic levelling procedures

Erect and dismantle restricted height scaffolding

Carry out basic demolition

Apply OHS requirements, policies and procedures in the construction industry

20

36

8

40

32

20

CPCCBL2001A

CPCCBL2002A

CPCCBL3002A

CPCCBL3003A

CPCCBL3004A

CPCCBL3005A

CPCCBL3006A

CPCCBL3009A

CPCCBL3010A

CPCCBL3011A

CPCCBL3014A

Handle and prepare bricklaying and blocklaying materials

Use bricklaying and blocklaying tools and equipment

Carry out masonry veneer construction

Carry out cavity brick construction

Construct masonry steps and stairs

Lay masonry walls and corners

Lay multi-thickness walls and piers

Install flashings and damp proof course

Construct masonry arches

Construct curved walls

Install fire-rated masonry construction

32

76

60

8

16

30

60

60

100

32

32

Page 32 of 110

Unit Code

Electives

CPCCBL3001A

CPCCBL3007A

CPCCBL3012A

CPCCBL3013A

CPCCBL3015A

CPCCBL3016A

Unit Title

Lay paving

Install glass blockwork

Construct fireplaces and chimneys

Construct masonry structural systems

Construct decorative brickwork


Hours

Total hours

24

8

48

40

70

32

968

Page 33 of 110


Function

Carpenter

Qualification Title Certificate III in Carpentry


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working in residential and commercial applications as a general carpenter.


(CPC08) Construction, Plumbing and Services Training Package . This sample program is based on CPC08 V6.1 and V7.0.


CPCCCA2002B

CPCCCA2011A

CPCCCA3001A

CPCCCA3002A





96

16

32

24

CPCCCA3003A

CPCCCA3004A

CPCCCA3005B

CPCCCA3006B

CPCCCA3007C

CPCCCA3008B

CPCCCA3023A

CPCCCM1012A




Erect roof trusses

Construct pitched roofs

Construct eaves



60

20

24

20

40

60

32

40

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A

CPCCCM2001A

CPCCCM2002A

CPCCCM2007B

CPCCCM2008B

CPCCCM2010B

CPCCCO2013A

CPCCOHS2001A





Carry out excavation

Use explosive power tools


Work safely at heights

Carry out concreting to simple forms


16

16

40

8

20

20

20

36

20

20

Page 34 of 110

Unit Code

Electives

CPCCCA3009B

CPCCCA3010A

CPCCCA3012A

CPCCCA3013A

CPCCCA3016A

CPCCCA3017B

CPCCCA3018A

CPCCCM3001C








Construct, erect and dismantle formwork for stairs and ramps

Operate elevated work platforms

Total hours

40

20

40

32

1026

80

70

24

40

Page 35 of 110


Function

Description

Demolisher/Demolition Contractor

Qualification Title Certificate III in Demolition


This is a sample training program appropriate for a person working with a demolition crew in demolition operations in the residential and commercial construction industry.

Notes


(CPC08) Construction, Plumbing and Services Training Package . This sample program is based on CPC08 V7.0.


Core

CPCCCA3001A

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM2001A

CPCCCM2008B

CPCCCM2010B

CPCCOHS2001A









32

20

20

20

36

40

8

20

CPCCDE2011A

CPCCDE2012A

CPCCDE3011A

CPCCSF2003A

Electives

CPCCCM3001C

CPCCDE3014A

CPCCDE3015A

CPCCSC2002A

CPPWMT3015A

FPICOT2206B

Use demolition tools and equipment

Carry out manual general demolition

Carry out mechanical general demolition



Remove non-friable asbestos

Remove friable asbestos


Move waste using loadshifting equipment

Cross cut materials with a hand-held chainsaw

40

40

24

20

Total hours

32

20

30

56

40

40

538

Page 36 of 110

CPCCPB3026B

CPCCPD2011A

CPCCPD2012A

CPCCPD2013A

CPCCPD3021A

CPCCPD3022A

CPCCPD3023A

CPCCPD3024A

CPCCPD3025A

CPCCPD3026A

CPCCPD3027A

CPCCPD3028A

CPCCPD3031A


Function

Painter and Decorator

Qualification Title Certificate III in Painting and Decorating


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working in the painting and decorating sector for residential and commercial construction work.




CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A





20

20

20

20

CPCCCM2001A

CPCCCM2003B

CPCCCM2008B

CPCCCM2010B

CPCCCM3001C

CPCCOHS2001A


Calculate and cost construction work





36

20

40

8

32

20

Erect and maintain trestle and plank systems

Handle painting and decorating materials

Use painting and decorating tools and equipment

Remove and replace doors and door and window components

Prepare surfaces for painting

Apply paint by brush and roller

Apply texture coat paint finishes by brush, roller and spray

Apply paint by spray

Match specified paint colour

Apply stains and clear timber finishes

Apply wallpaper

Apply decorative paint finishes

Implement safe lead paint and asbestos work practices in the painting industry

40

100

40

80

10

16

80

4

50

40

50

114

20

Page 37 of 110

Unit Code

Electives

CPCCPD3029A

CPCCPD3030B

CPCCPD3032A

CPCCPD3034A


Remove graffiti and apply protective coatings

Apply protective paint coating systems

Apply advanced wallpaper techniques

Apply advanced decorative paint finishes

Total hours

30

30

30

40

1010

Page 38 of 110


Function

Rigger

Qualification Title Certificate III in Rigging


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working in the rigging sector in the construction industry.


(CPC08) Construction, Plumbing and Services Training Package .



CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A





20

20

20

20

CPCCCM2001A

CPCCCM2010B

CPCCCM3001C

CPCCCM3003A

CPCCOHS2001A




Work safely around power sources, services and assets


Licence to perform rigging basic level

Licence to perform rigging intermediate level

36

8

32

40

20

196

40

CPCCLRG3001A

CPCCLRG3002A

Electives

CPCCRI3001A

CPCCRI3014A

CPCCRI3015A

RIIOHS302A

Operate personnel and materials hoists

Perform advanced structural steel erection

Perform advanced tilt-up slab erection

Implement traffic management plan

Total hours

32

24

24

20

552

Page 39 of 110


Function

Roof Tiler

Qualification Title Certificate III in Roof Tiling


Description This is a sample training program appropriate for a person working in roof tiling for residential and commercial construction work.

Notes

Unit Code




Core

CPCCCM1012A

CPCCCM1013A



20

20

CPCCCM1014A

CPCCCM1015A

CPCCCM2001A

CPCCCM2008B

CPCCOHS2001A






20

20

36

40

20

CPCPCM2043A

CPCPCM2055A

CPCCRT2001A

CPCCRT2002A

CPCCRT3001A

CPCCRT3002A

CPCCRT3004B

Electives


Work safely on roofs

Handle roof tiling materials

Use roof tiling tools and equipment

Tile regular roofs

Tile irregular roofs

Repair and renovate tile roofs

48

84

20

50

20

16

16

CPCCRT3005B

CPCCRT3006B

CPCCSC2002A

Slate a roof

Fix shingles to roofs and facades


Total hours

48

24

56

558

Page 40 of 110


Function

Plasterer

Qualification Title Certificate III in Wall and Ceiling Lining


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working in the wall and ceiling lining sector.




CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A





20

20

20

20

CPCCCM2001A

CPCCCM2010B

CPCCOHS2001A

CPCCPB3001A

CPCCPB3002A

CPCCPB3003A

CPCCPB3004A

CPCCPB3005A

CPCCPB3006A

CPCCPB3007A

CPCCPB3008A

CPCCPB3009A

CPCCPB3010A

CPCCPB3011A

CPCCPB3012A

Electives

CPCCWC3004A

CPCCPB3015A

CPCCPB3017A






Fix battens

Fix wet area sheets









Install suspended ceilings



20

60

16

20

40

40

20

40

60

60

20

20

36

8

20

40

20

20

Page 41 of 110

Unit Code

CPCCPB3018A

CPCCPB3023A

CPCCPB3025A

CPCCSP3005A

Unit Title





Total hours

Hours

60

6

10

120

836

Page 42 of 110


Function

Plasterer

Qualification Title Certificate III in Wall and Ceiling Lining


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working in the wall and ceiling lining sector.




CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A





20

20

20

20

CPCCCM2001A

CPCCCM2010B

CPCCOHS2001A

CPCCPB3001A

CPCCPB3002A

CPCCPB3003A

CPCCPB3004A

CPCCPB3005A

CPCCPB3006A

CPCCPB3007A

CPCCPB3008A

CPCCPB3009A

CPCCPB3010A

CPCCPB3011A

CPCCPB3012A

Electives

CPCCWC3004A

CPCCPB3015A

CPCCPB3017A






Fix battens

Fix wet area sheets









Install suspended ceilings



20

60

16

20

40

40

20

40

60

60

20

20

36

8

20

40

20

20

Page 43 of 110

Unit Code

CPCCPB3018A

CPCCPB3023A

CPCCPB3025A

CPCCSP3005A

Unit Title





Total hours

Hours

60

6

10

120

836

Page 44 of 110

Occupation/

Work Function

Post-tensioner – supervisor

Qualification Title Certificate III in Post-Tensioning


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working in posttensioning in the construction industry


(CPC08) Construction, Plumbing and Services Training Package . This sample program is based on CPC08 V8.


CPCCCM1012A

CPCCCM1014A

CPCCCM1015A

CPCCCM2001A





20

20

20

36

CPCCCM2004A

CPCCCM2005B

CPCCCM2010B

CPCCOHS2001A

CPCCSF2002A

CPCCSF3002A

CPCCSF3003A

CPCCSF3004A

Electives

CPCCCM3001C

CPCCSF2005A

CPCCSF2007A

CPCPCM4011A

RIIOHS202A

Handle construction materials

Use construction tools and equipment








Arc weld reinforcement steel


Carry out work-based risk control processes

Enter and work in confined spaces

16

96

8

20

80

40

40

20

Total hours

32

40

50

24

30

592

Page 45 of 110


Function

Post-tensioner – operative

Qualification Title Certificate III in Post-Tensioning


Description

Notes

This is a sample training program appropriate for a person working in posttensioning in the construction industry




Core

CPCCCM1012A

CPCCCM1014A

CPCCCM1015A

CPCCCM2001A

CPCCCM2004A

CPCCCM2005B

CPCCCM2010B

CPCCOHS2001A









20

20

20

36

16

96

8

20

CPCCSF2002A

CPCCSF3002A

CPCCSF3003A

CPCCSF3004A

Electives

CPCCCM2008B

COCCCO2014A

CPCCSF2007A

CPCPCM4011A

TLILIC108A






Carry out concrete work


Carry out work=based risk control processes

Licence to operate a forklift truck

80

40

40

20

Total hours

40

120

50

24

40

690

Page 46 of 110


Function

Licensed crane operator

Qualification Title Certificate III in Construction Crane Operations


Description This is a sample training program appropriate for a person with a licence (C2) to operate a slewing mobile crane (up to 20 tonnes).

Notes

Unit Code

Core




BSBCUS301B

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

Deliver and monitor a service to customers




35

20

20

20

CPCCCM2001A

CPCCCM2004A

CPCCCM2010B

CPCCCM3001C

CPCCCM3003A






36

16

8

32

40

CPCCDO3012A

CPCCLDG3001A

CPCCOHS2001A

40

80

20

TLIB3011A

TLIB3013A

TLIB3015A

TLIF2006A

TLIF2010A

TLIF3084A

TLILIC2016A

Specialist

TLILIC3008A

Electives

CPCCCM1015A

CPCCLRG3001A

Perform crane scheduling

Licence to perform dogging


Set up and rig crane for lift

Maintain mobile cranes

Undertake site inspection

Apply accident-emergency procedures

Apply fatigue management strategies

Follow mobile crane safety procedures

Licence to drive heavy rigid vehicle*

Licence to operate a slewing mobile crane (up to 20 tonnes)



30

40

20

20

30

15

50

70

20

196

TLILIC2005A

Licence to operate a boom-type elevated work platform (boom length 11 meters or more)

Total hours

30

888

Page 47 of 110


Function

Licensed crane operator

Qualification Title Certificate III in Construction Crane Operations


Description This is a sample training program appropriate for a person with a licence (C6) to operate a slewing mobile crane (up to 60 tonnes).

Notes

Unit Code

Core




BSBCUS301B

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A





35

20

20

20

CPCCCM2001A

CPCCCM2004A

CPCCCM2010B

CPCCCM3001C

CPCCCM3003A






36

16

8

32

40

CPCCDO3012A

CPCCLDG3001A

CPCCOHS2001A

40

80

20

TLIB3011A

TLIB3013A

TLIB3015A

TLIF2006A

TLIF2010A

TLIF3084A

TLILIC2016A

Specialist

TLILIC4009A

Electives

CPCCCM1015A

CPCCLRG3001A

TLILIC2005A

Perform crane scheduling

Licence to perform dogging


Set up and rig crane for lift

Maintain mobile cranes

Undertake site inspection

Apply accident-emergency procedures

Apply fatigue management strategies

Follow mobile crane safety procedures

Licence to drive heavy rigid vehicle*

Licence to operate a slewing mobile crane (up to 60 tonnes)



Licence to operate a boom-type elevated work platform (boom length 11 meters or more)

Total hours

30

40

20

20

30

15

50

70

20

196

30

888

Page 48 of 110


Function

Shopfitter

Qualification Title Certificate III in Shopfitting


Description

Notes

This is a sample training program appropriate for a person working in shopfitting.




Core

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A

CPCCCM2001A

CPCCCM2004A





20

20

20

20

CPCCCM2005B

CPCCCM2006B

CPCCOHS2001A






36

16

96

8

20

CPCCCA3010A

CPCCJN3001A

CPCCJN3005A

CPCCSH2001A

CPCCSH2002A

CPCCSH3001A

CPCCSH3002A

CPCCSH3003A


Use static machines


Prepare surfaces






Apply finishes

70

56

16

32

40

80

56

40

40

15

CPCCSH3005A

CPCCSH3006A

Elective

CPCCCA3001A

CPCCCA3013A

CPCCCA3014A



Construct bulkheads

32

40

16

Page 49 of 110

Unit Code

CPCCCA3015A

CPCCCM2007B

CPCCCM3001C

CPCCJN3002A

CPCCJN3003A

CPCCPB3015A

CPCCSF2003A

LMFFM3006B

Unit Title

Assemble partitions







Install furnishing products

Total hours

Hours

32

16

32

60

80

20

20

24

1073

Page 50 of 110

Occupation/

Work Function

Shopfitter

Qualification Title Certificate III in Shopfitting


Description

Notes

This is a sample training program appropriate for a person working in shopfitting.




Core

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A

CPCCCM2001A

CPCCCM2004A





20

20

20

20

CPCCCM2005B

CPCCCM2006B

CPCCOHS2001A






36

16

96

8

20

CPCCCA3010A

CPCCJN3001A

CPCCJN3005A

CPCCSH2001A

CPCCSH2002A

CPCCSH3001A

CPCCSH3002A

CPCCSH3003A


Use static machines


Prepare surfaces






Apply finishes

70

56

16

32

40

80

56

40

40

15

CPCCSH3005A

CPCCSH3006A

Electives

CPCCCA3001A

CPCCCA3013A

CPCCCA3014A



Construct bulkheads

32

40

16

Page 51 of 110

Unit Code

CPCCCA3015A

CPCCCM2007B

CPCCCM3001C

CPCCJN3002A

CPCCJN3003A

CPCCPB3015A

CPCCSF2003A

LMFFM3006B

Unit Title

Assemble partitions







Install furnishing products

Total hours

Hours

32

16

32

60

80

20

20

24

1073

Page 52 of 110

Occupation/

Work Function

Carpenter and Joiner

Qualification Title Certificate III in Carpentry and Joinery


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working as a carpenter and joiner covering work in residential and commercial applications.


(CPC08) Construction, Plumbing and Services Training Package. This sample program is based on CPC08 V6.1 and V7.0.


CPCCCA2002B

CPCCCA2011A

CPCCCA3001A

CPCCCA3002A





96

16

32

24

CPCCCA3003A

CPCCCA3004A

CPCCCA3005B

CPCCCA3006B

CPCCCA3007C

CPCCCA3008B

CPCCCA3010A

CPCCCA3013A

CPCCCA3017B

CPCCCA3019A




Erect roof trusses


Construct eaves





60

20

70

40

40

60

32

40

20

40

CPCCCA3023A

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A

CPCCCM2001A

CPCCCM2007B

CPCCCM2008B

CPCCCM2010B

CPCCCO2013A











20

36

16

40

24

20

20

20

8

20

Page 53 of 110

Unit Code

CPCCOHS2001A

CPCCJN3001A

CPCCJN3003A

CPCCJN3004A

Electives

CPCCCA3009B

CPCCCA3011A

CPCCCA3012A

CPCCCA3016A

Unit Title


Use static machines




Refurbish timber sashes to window frames



Total hours

Hours

20

56

80

40

80

16

24

40

1170

Page 54 of 110

Occupation/

Work Function

Carpenter and Joiner – Stair manufacture and installation

Qualification Title Certificate III in Carpentry and Joinery


Description This is a sample training program appropriate for a person working as a carpenter and joiner undertaking the manufacture, assembly and installation of stairs.

Notes

Unit Code

Core




CPCCCA2002B

CPCCCA2011A

CPCCCA3001A

CPCCCA3002A





96

16

32

24

CPCCCA3003A

CPCCCA3004A

CPCCCA3005B

CPCCCA3006B

CPCCCA3007C

CPCCCA3008B

CPCCCA3010A

CPCCCA3013A

CPCCCA3017B

CPCCCA3019A




Erect roof trusses


Construct eaves





60

20

70

40

40

60

32

40

20

40

CPCCCA3023A

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A

CPCCCM2001A

CPCCCM2007B

CPCCCM2008B

CPCCCM2010B










20

36

16

40

8

24

20

20

20

Page 55 of 110

Unit Code

CPCCCO2013A

CPCCOHS2001A

CPCCJN3001A

CPCCJN3003A

CPCCJN3004A

Electives

CPCCJS3002A

CPCCJS3003A

CPCCJS3004A

CPCCJS3011A

Unit Title



Use static machines



Manufacture stair components for straight flighted stairs

Assemble and install stairs

Manufacture and install continuous handrailing and special stair components

Design and set out stairs

Total hours

32

24

56

24

1146

Hours

20

20

56

80

40

Page 56 of 110

Occupation/

Work Function

Signwriter/Sign Manufacturer

Qualification Title Certificate III in Signage


Description

Notes

This is a sample training program appropriate for a person producing signage.




Core

CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A

CPCCOHS2001A






20

20

20

20

20

CPCCSI2001A

CPCCSI2002A

CPCCSI2003A

CPCCSI2004A

CPCCSI2005A

CPCCSI2006A

CPCCSI2007A

CPCCSI3001A

Use colour for signage

Lay out and design signage

Prepare surfaces for signage

Produce digital signage

Fabricate signage

Signwrite to simple forms

Apply fasteners and fixings

Produce vinyl signage

Use rotary router CPCCSI3002A

Electives

CPCCCM2006B

CPCCCM3001C

CPCCSI3003A

CPCCSI3004A

CPCCSI3006A

CPCCSI3007A

CPCCSI3009A



Signwrite to decorative forms

Apply advanced vinyl applications

Apply gilding to signage

Apply lines and scrolls

Screen-print signage

40

76

16

36

20

24

40

20

36

Total hours

40

48

36

704

8

32

92

40

Page 57 of 110

CPCCST2001A

CPCCST2002A

CPCCST2003A

CPCCST2004A

CPCCST3001A

CPCCST3002A

CPCCST3003A

CPCCST3004A

CPCCST3005A

CPCCST3006A

Electives

CPCCBL3016A

CPCCJN2001A

Occupation/

Work Function

Stonemason

Qualification Title Certificate III in Stonemasonry (Monumental/Installation)


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person working as a stonemason in commercial and monumental applications.




CPCCCM1012A

CPCCCM1013A

CPCCCM1014A

CPCCCM1015A





20

20

20

20

CPCCCM2001A

CPCCCM2002A

CPCCCM2008B

CPCCCA3002A

CPCCCA3023A

CPCCCO2013A

CPCCOHS2001A


Carry out excavation






24

20

20

36

16

40

24

Prepare for stonemasonry construction process

Identify and use stone products

Finish stone

Lay stone

Dress and mould stone

Shape solid stone

Split stone manually

Dress stone manually

Carry out profile work

Machine stone

10

40

20

40

25

8

30

40

60

40


Assemble components

32

32

Page 58 of 110

Unit Code

CPCCST2005A

CPCCST3008A

CPCCST3010A

CPCCST3011A

CPCCST3012A

CPCCST3013A

CPCCST3014A

Unit Title


Inlay lead to stone

Set out and cut letters in stone

Plan monument construction

Build stone veneer walls

Carry out cemetery monument fixing

Set and anchor stone facades

Total hours

Hours

8

20

32

12

32

32

32

805

Page 59 of 110

Occupation/

Work Function

General Plumber

Qualification Title Certificate III in Plumbing


Description This sample training program is appropriate for a person working in the plumbing industry within the industry sectors: Water , Sanitary , Roofing and Gas

Services .

Notes

Unit Code

On completion of this qualification participants may apply to the Plumbing

Industry Commission (PIC) for registration in Water , Sanitary , Roofing , and

Gas Services .

This sample qualification also complies with (CPC08) Construction, Plumbing and Services Training Package structuring rules, which state that individual competency units gained in one subsector may be used as a credit for any other subsector in which the unit is listed. For further information on choosing electives, refer to the qualification structure and rules within the (CPC08)

Construction, Plumbing and Services Training Package **Note duplicated units have had their hours removed from sample program

calculations. This sample program is based on CPC08 V6.1 and V7.0.

Unit Title

Water – Requirements 24 core, 5 electives

Hours

Core

CPCPCM2039A

CPCPCM2040A

CPCPCM2041A

CPCPCM2043A

CPCPCM2045A

CPCPCM2046A

CPCPCM2047A







Carry out levelling

Mark out materials CPCPCM2050A

CPCPCM2052A

CPCPCM2053A

CPCPCM2054A

CPCPCM2055A

CPCPCM3021A

CPCPCM3022A

CPCPCM3023A

CPCPFS3031A

CPCPWT3020A

CPCPWT3021A





Flash penetrations through roofs and walls


Fabricate and install non-ferrous pressure piping


Connect and install storage tanks to a domestic water supply

Set out and install water services

6

40

6

20

10

8

15

50

16

16

16

20

18

8

12

40

12

36

Page 60 of 110

Unit Code

CPCPWT3022A

CPCPWT3023A

CPCPWT3025A

CPCPWT3026A

CPCPWT3027A

HLTFA211A

Unit Title

Install and adjust water service controls and devices

Install and commission water heating systems


Fit off and commission heated and cold water services



Electives

CPCPIG2021A

CPCPIG3021A

CPCPWT3024A

CPCPWT3028A

CPCPFS3037A



Install and maintain domestic water treatment equipment



Sub total water hours

Sanitary – Requirements 6 core, 4 electives

Core

CPCPCM2048A

CPCPDR2021A

CPCPSN3011B

CPCPSN3022A

CPCPSN3023A

CPCPSN3024A

Electives







CPCPCM2049A

CPCPSN3025A

CPCPSN3026A

RIICCM210A





Sub total sanitary hours

Hours

12

25

8

16

6

8

8

8

8

16

140

5

4

10

10

60

513

8

8

8

28

28

20

Page 61 of 110


Roofing – Requirements 8 core, 4 electives

Core

CPCPCM2048A

CPCPRF2022A

CPCPRF2023A

CPCPRF3021A

CPCPRF3022A

CPCPRF3023A

CPCPRF3024A

CPCPRF3026A

Electives









CPCCCM2008B

CPCCCM2010B

CPCCCM3001C

CPCPRF3025A





Gas fitting – Requirements 12 core, 5 electives

Sub total roofing hours

Core

CPCPCM2048A

CPCPGS3046A

CPCPGS3047A

CPCPGS3048A

CPCPGS3049A

CPCPGS3051A

CPCPGS3053A

CPCPGS3054A







CPCPGS3056A

CPCPGS3057A

CPCPGS3058A

CPCPGS3059A







Hours

40

8

32

12

224

48

16

10

20

8

16

10

4

8

12

12

8

12

8

16

8

24

8

22

4

Page 62 of 110


Electives

CPCPCM2049A

CPCPGS3050A

CPCPGS3052A

CPCPGS3060A




Install LPG storage of aggregate storage capacity exceeding

500 litres and less than 8KL

Install trench support RIICCM210A

Sub total gas fitting hours

Total hours: 4 streams – Water, Sanitary, Roofing, Gas fitting

Hours

8

4

12

6

16

188

1065

Page 63 of 110

Occupation/

Work Function

General Plumber



Description This sample training program is appropriate for a person working in the plumbing industry within the industry sectors: Water, Sanitary, Drainage, Roofing and

Gas Services .

Notes

Unit Code


Industry Commission (PIC) for registration in Water, Sanitary, Drainage,

Roofing, and Gas Services .


Construction, Plumbing and Services Training Package .

**Note duplicated

units have had their hours removed from sample program calculations.


Unit Title


Hours

Core

CPCPCM2039A

CPCPCM2040A

CPCPCM2041A

CPCPCM2043A

CPCPCM2045A

CPCPCM2046A

CPCPCM2047A







Carry out levelling


CPCPCM2052A

CPCPCM2053A

CPCPCM2054A

CPCPCM2055A

CPCPCM3021A

CPCPCM3022A

CPCPCM3023A

CPCPFS3031A

CPCPWT3020A

CPCPWT3021A











6

40

6

20

10

8

15

50

16

16

16

20

18

8

12

40

12

36

Page 64 of 110

Unit Code

CPCPWT3022A

CPCPWT3023A

CPCPWT3025A

CPCPWT3026A

CPCPWT3027A

HLTFA211A

Unit Title







Electives

CPCPIG2021A

CPCPIG3021A

CPCPWT3024A

CPCPWT3028A

CPCPFS3037A








Core

CPCPCM2048A

CPCPDR2021A

CPCPSN3011B

CPCPSN3022A

CPCPSN3023A

CPCPSN3024A

Electives







CPCPCM2049A

CPCPSN3025A

CPCPSN3026A

RIICCM210A






Hours

12

25

8

16

6

8

8

8

8

16

140

5

4

10

10

60

513

8

8

8

28

28

20

Page 65 of 110

Unit Code

Drainage

Core

CPCPDR2021A

CPCPDR2022A

CPCPDR2024A

CPCPDR2025A

CPCPDR2026A

CPCPDR3021A

CPCPDR3022A

CPCPDR3023A

RIICCM210A

Electives

CPCPCM2049A

CPCPDR2023A

CPCPWT3029A

Unit Title

Requirements 9 core, 3 electives




Drain work site









Sub total drainage hours


Core

CPCPCM2048A

CPCPRF2022A

CPCPRF2023A

CPCPRF3021A

CPCPRF3022A

CPCPRF3023A

CPCPRF3024A

CPCPRF3026A

Electives









CPCCCM2008B

CPCCCM2010B

CPCCCM3001C

CPCPRF3025A






Hours

8

4

12

138

40

8

32

12

224

4

8

30

8

16

8

20

15

5

48

16

10

20

8

16

10

4

Page 66 of 110



Core

CPCPCM2048A

CPCPGS3046A



CPCPGS3047A

CPCPGS3048A

CPCPGS3049A

CPCPGS3051A

CPCPGS3053A

CPCPGS3054A

CPCPGS3056A








CPCPGS3057A

CPCPGS3058A

CPCPGS3059A




Electives

CPCPCM2049A

CPCPGS3050A

CPCPGS3052A

CPCPGS3060A








Total hours: 5 streams – Water, Sanitary, Drainage, Roofing and Gas Services

Hours

1203

8

4

12

6

16

188

8

12

12

8

12

8

16

8

24

8

22

4

Page 67 of 110

Occupation/

Work Function

General Plumber



Description This sample training program is appropriate for a person working in the plumbing industry within the industry sectors: Water , Sanitary , Mechanical and Gas

Services .

Notes

Unit Code


Industry Commission (PIC) for registration in Water, Sanitary, Mechanical, and

Gas Services .



**Note duplicated units have had their hours removed from sample program calculations .


Unit Title


Hours

Core

CPCPCM2039A

CPCPCM2040A

CPCPCM2041A

CPCPCM2043A

CPCPCM2045A

CPCPCM2046A

CPCPCM2047A







Carry out levelling


CPCPCM2052A

CPCPCM2053A

CPCPCM2054A

CPCPCM2055A

CPCPCM3021A

CPCPCM3022A

CPCPCM3023A

CPCPFS3031A

CPCPWT3020A

CPCPWT3021A











6

40

6

20

10

8

15

50

16

16

16

20

18

8

12

40

12

36

Page 68 of 110

Unit Code

CPCPWT3022A

CPCPWT3023A

CPCPWT3025A

CPCPWT3026A

CPCPWT3027A

HLTFA211A

Unit Title







Electives

CPCPIG2021A

CPCPIG3021A

CPCPWT3024A

CPCPWT3028A

CPCPFS3037A








Core

CPCPCM2048A

CPCPDR2021A

CPCPSN3011B

CPCPSN3022A

CPCPSN3023A

CPCPSN3024A

Electives







CPCPCM2049A

CPCPSN3025A

CPCPSN3026A

RIICCM210A






Hours

12

25

8

16

6

8

8

8

8

16

140

5

4

10

10

60

513

8

8

8

28

28

20

Page 69 of 110


Mechanical services – Requirements 4 core, 11 electives

Core

CPCPCM2048A

CPCPMS2021A

CPCPMS3031A

CPCPMS3033A

Electives


Assemble mechanical services components

Fabricate and install steel pressure piping

Install small bore heating systems

CPCPMS3032A

CPCPMS3034A

CPCPMS3035A

CPCPMS3036A

Select and fit insulation and sheathing

Install medical gas pipeline systems

Install and test ducting systems

Install air handling units

CPCPMS3037A

CPCPMS3038A

CPCPMS3039A

CPCPMS3040A

Core

CPCPCM2048A

CPCPGS3046A

Install and test split system air conditioning

Install air conditioning control equipment

Maintain mechanical services equipment

Install and maintain evaporative air cooling systems

MEM10009B

MEM10010B

Install refrigeration and air conditioning plant and equipment

Install pipework and pipework assemblies

MEM18086B Test, recover, evacuate and charge refrigeration systems

Sub total mechanical services hours




CPCPGS3047A

CPCPGS3048A

CPCPGS3049A

CPCPGS3051A

CPCPGS3053A

CPCPGS3054A

CPCPGS3056A

CPCPGS3057A

CPCPGS3058A

CPCPGS3059A











Hours

8

12

12

8

12

8

16

8

24

8

22

4

15

8

8

20

8

24

12

12

40

40

40

316

8

12

54

15

Page 70 of 110


Electives

CPCPCM2049A

CPCPGS3050A

CPCPGS3052A

CPCPGS3060A








Total hours: 4 streams – Water, Sanitary, Mechanical Services and Gas Services

Hours

1157

8

4

12

6

16

188

Page 71 of 110

Occupation/

Work Function

General Plumber



Description This sample training program is appropriate for a person working in the plumbing industry within the industry sectors: Water, Sanitary, Drainage, Mechanical

Services, Roofing and Gas Services .

Notes

Unit Code


Industry Commission (PIC) for registration in Water , Sanitary , Drainage ,

Mechanical Services, Roofing and Gas Services .



**Note duplicated

units have had their hours removed from sample program calculations.


Unit Title


Hours

Core

CPCPCM2039A

CPCPCM2040A

CPCPCM2041A

CPCPCM2043A

CPCPCM2045A

CPCPCM2046A

CPCPCM2047A







Carry out levelling


CPCPCM2052A

CPCPCM2053A

CPCPCM2054A

CPCPCM2055A

CPCPCM3021A

CPCPCM3022A

CPCPCM3023A

CPCPFS3031A

CPCPWT3020A

CPCPWT3021A











6

40

6

20

10

8

15

50

16

16

16

20

18

8

12

40

12

36

Page 72 of 110

Unit Code

CPCPWT3022A

CPCPWT3023A

CPCPWT3025A

CPCPWT3026A

CPCPWT3027A

HLTFA211A

Unit Title







Electives

CPCPIG2021A

CPCPIG3021A

CPCPWT3024A

CPCPWT3028A

CPCPFS3037A








Core

CPCPCM2048A

CPCPDR2021A

CPCPSN3011B

CPCPSN3022A

CPCPSN3023A

CPCPSN3024A

Electives







CPCPCM2049A

CPCPSN3025A

CPCPSN3026A

RIICCM210A






Hours

12

25

8

16

6

8

8

8

8

16

140

5

4

10

10

60

513

8

8

8

28

28

20

Page 73 of 110


Drainage – Requirements 9 core, 3 electives

Core

CPCPDR2021A

CPCPDR2022A

CPCPDR2024A

CPCPDR2025A

CPCPDR2026A

CPCPDR3021A

CPCPDR3022A

CPCPDR3023A

RIICCM210A




Drain work site






Electives

CPCPCM2049A

CPCPDR2023A

CPCPWT3029A




Mechanical services – Requirements 4 core, 11 electives

Sub total drainage hours

Core

CPCPCM2048A

CPCPMS2021A

CPCPMS3031A

CPCPMS3033A

Electives

CPCPMS3032A

CPCPMS3034A


Assemble mechanical services components


Install small bore heating systems

CPCPMS3035A

CPCPMS3036A

CPCPMS3037A

CPCPMS3038A

CPCPMS3039A

CPCPMS3040A

MEM10009B

MEM10010B

MEM18086B

Select and fit insulation and sheathing

Install medical gas pipeline systems

Install and test ducting systems

Install air handling units

Install and test split system air conditioning

Install air conditioning control equipment

Maintain mechanical services equipment

Install and maintain evaporative air cooling systems

Install refrigeration and air conditioning plant and equipment

Install pipework and pipework assemblies

Test, recover, evacuate and charge refrigeration systems

Sub total mechanical services hours

Hours

8

12

54

15

15

8

8

20

8

24

12

12

40

40

40

316

4

8

30

8

16

8

20

15

5

8

4

12

138

Page 74 of 110



Core

CPCPCM2048A

CPCPRF2022A



CPCPRF2023A

CPCPRF3021A

CPCPRF3022A

CPCPRF3023A





CPCPRF3024A

CPCPRF3026A

Electives

CPCCCM2008B

CPCCCM2010B

CPCCCM3001C

CPCPRF3025A









Core

CPCPCM2048A

CPCPGS3046A



CPCPGS3047A

CPCPGS3048A

CPCPGS3049A

CPCPGS3051A

CPCPGS3053A

CPCPGS3054A

CPCPGS3056A

CPCPGS3057A

CPCPGS3058A

CPCPGS3059A











Hours

40

8

32

12

224

48

16

10

20

8

16

10

4

8

12

12

8

12

8

16

8

24

8

22

4

Page 75 of 110


Electives

CPCPCM2049A

CPCPGS3050A

CPCPGS3052A

CPCPGS3060A








Total hours: 6 streams – Water, Sanitary, Drainage, Mechanical Services, Roofing and Gas Services

Hours

1519

8

4

12

6

16

188

Page 76 of 110

Occupation/

Work Function

Fire Protection Systems Technician

Qualification Title Certificate III in Fire Protection


Description

Notes

Unit Code

Core

This sample training program is appropriate for a person working in installing, testing and maintaining fire protection systems.

For information on selecting alternative electives to those listed in the sample qualification refer to the (CPC08) Construction, Plumbing and Services

Training Package qualification structure and rules. This sample program is based on CPC08 V6.1 and V7.0.


CPCPCM2039A

CPCPCM2040A

CPCPCM2041A

CPCPCM2043A





10

8

15

50

CPCPCM2045A

CPCPCM2046A

CPCPCM2047A

CPCPCM2048A

CPCPCM2049A

CPCPCM2050A

CPCPCM2052A

CPCPCM2053A



Carry out levelling



Mark out materials



8

20

16

16

6

40

6

8

CPCPCM3023A

CPCPFS2021A

CPCPFS3030A

CPCPFS3031A

CPCPFS3032A

CPCPFS3033A

CPCPFS3034A

CPCPFS3035A

CPCPFS3036A

CPCPFS3037A

CPCPFS3038A

CPCPFS3039A



Design pre-calculated fire sprinkler systems


Install distribution and range pipes

Fit off sprinkler heads, controls and ancillary equipment

Install control valve assemblies, actuating devices and local alarms

Test fire protection systems for pressure

Install special hazard systems


Test and maintain fire hydrant and hose reel installations

Test and maintain automatic fire sprinklers

12

60

60

40

80

40

100

16

45

60

60

60

Page 77 of 110

Unit Code

CPCPMS3031A

CPCPWT3025A

CPCPWT3028A

CPPFES2025A

CPPFES2043A

CPPFES2047A

HLTFA211A

Electives

CPCCCM3001C

CPCPFS3040A

CPCPFS3041A

CPCPFS3042A

CPCPFS3043A

RIICCM210A

Unit Title




Inspect, test and maintain gaseous fire-suppression systems

Prevent ozone depleting substance and synthetic greenhouse gas emissions

Inspect and test control and indicating equipment



Conduct basic functional testing of water-based firesuppression systems

Inspect and test fire pumpsets

Conduct annual functional testing of complex water-based firesuppression systems

Conduct functional water flow testing


Total hours

32

40

40

60

32

16

1221

Hours

54

8

10

45

15

25

8

Page 78 of 110

Occupation/

Work Function

Builder/Construction Manager

Qualification Title Certificate IV in Building and Construction (Building)


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a builder and manager of a small to medium-sized building business.


Training Package qualification structure and rules. This sample program is based on CPC08 V7.0.


BSBSMB406A 60

CPCCBC4001A

CPCCBC4002A

Manage small business finances



40

40

CPCCBC4003A

CPCCBC4004A

CPCCBC4005A

CPCCBC4006B

CPCCBC4007A






40

60

40

40

40

CPCCBC4008B

CPCCBC4009B

CPCCBC4010B

CPCCBC4011B

CPCCBC4012B

Electives

CPCCBC4014A






40

50

160

80

30

40

CPCCBC4018A

CPCCBC4020A




Total hours

40

40

840

Page 79 of 110

Occupation/

Work Function

Contract Administrator

Qualification Title Certificate IV in Building and Construction (Contract Administration)


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person interested in working as a contract administrator in the building and construction industry in small to medium-sized enterprises.




BSBOHS201A

CPCCBC4003A

20

40

CPCCBC4006B

CPCCBC4012B

CPCCBC4016A

CPCCBC4026A

Participate in OHS processes





Arrange building applications and approvals

40

30

20

20




20

20

20

CPCCBC4029B

CPCCBC4031A

CPCCBC4032A

Electives

BSBITU202A

BSBPMG407A

BSBPMG510A

BSBWOR401A

CPCCBC4013A

CPCCBC4024A

Create and use spreadsheets

Apply risk management techniques

Manage projects

Establish effective workplace relationships



Total hours

30

40

60

50

20

20

450

Page 80 of 110

Occupation/

Work Function

Building Estimator and Scheduler

Qualification Title Certificate IV in Building and Construction (Estimating)


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person interested in working as an estimator or scheduler in the building and construction field.




BSBPMG407A

CPCCBC4001A

40

40

CPCCBC4004A

CPCCBC4005A

CPCCBC4010B

CPCCBC4011B

Apply risk management techniques






60

40

160

80

CPCCBC4012B

CPCCBC4013A

Electives

BSBITU202A

CPCCBC4006B



30

20

30

40

CPCCBC4014A

CPCCBC4015A

CPCCBC4016A

CPCCBC4017A

CPCCBC4021A








Total hours

40

20

20

20

20

660

Page 81 of 110

Occupation/

Work Function

Building Sales Consultant

Qualification Title Certificate IV in Building and Construction (Sales)


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person interested in working as a sales consultant in the building and construction industry.




BSBOHS201A

CPCCBC4003A

CPCCBC4012B

CPCCBC4027B

Participate in OHS processes



Establish a basis for sales consulting

20

40

30

20

CPCCBC4029B

CPCCBC4030A

CPCCBC4031A

CPCCBC4032A

CPCCBC4033A

Electives

CPCCBC4025A

BSBCUS402B


Analyse and communicate industry information



Maintain the sales environment

20

20

20

20

20

BSBSLS403A

BSBSLS404A

BSBWRT401A

CPPDSM4014A

Manage personal work priorities and professional development

Address customer needs

Present a sales solution

Secure prospect commitment

Write complex documents

Market property for sale

Total hours

20

50

60

20

50

30

440

Page 82 of 110

Occupation/

Work Function

Building Site Manager or Supervisor

Qualification Title Certificate IV in Building and Construction (Site Management)


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person interested in working as a site manager or supervisor in the building and construction industry.




BSBWOR402A 50

CPCCBC4001A

CPCCBC4002A

Promote team effectiveness



40

40

CPCCBC4007A 40

CPCCBC4008B

CPCCBC4009B

CPCCBC4010B

CPCCBC4011B

CPCCBC4012B

Electives

BSBITU202A

BSBPMG510A







40

50

160

80

30

30

60

CPCCBC4017A

CPCCBC4021A

CPCCBC4024A

CPCSUS4001A


Manage projects





Total hours

20

20

20

40

720

Page 83 of 110

Occupation/

Work Function

Heritage Restorer

Qualification Title Certificate IV in Building and Construction (Specialist Trades)


Description

Notes

Unit Code

This is a sample training program appropriate for a person interested in working as a heritage restorer in the building and construction industry.



Note please visit the packaging rules for entry requirements in the specialist trade area of heritage restoration.


Core

BSBOHS404B 40

CPCCBC4004A

CPCCBC4012B

CPCCBC4034A

Contribute to the implementation of strategies to control OHS risk




60

30

40

Electives

CPCCBC4020A

CPCCBC4021A

CPCCBC4035A

CPCCBC4036A

CPCCBC4037A

CPCCBC4038A

CPCCBC4039A

CPCCBC4040A

CPCCBC4051A

BSBMGT403A

CPCSUS4001A



Initiate the heritage works process

Prepare to undertake the heritage restoration process

Prepare drawings for heritage works

Prepare work plans for restoration work

Undertake the heritage restoration process

Prepare report for heritage restoration work

Supervise asbestos removal

Implement continuous improvement


Total hours 498

40

20

40

20

40

20

20

40

8

40

40

Page 84 of 110

Occupation/

Work Function

Trade Contractor

Qualification Title Certificate IV in Building and Construction (Trade Contracting)


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person interested in managing a trade contracting business in the building and construction industry.




BSBCUS301B

BSBSMB406A

BSBWOR401A

CPCCBC4002A

CPCCBC4004A

CPCCBC4005A



Establish effective workplace relationships




35

60

50

40

60

40

CPCCBC4008B

CPCCBC4012B

CPCCBC4024A

CPCCBC4034A





40

30

20

40

Electives

BSBPMG510A

CPCCBC4003A

CPCCBC4007A

CPCCBC4013A

CPCCBC4017A

Manage projects





Total hours

60

40

40

20

20

595

Page 85 of 110

Occupation/

Work Function

Swimming Pool and Spa Builder

Qualification Title Certificate IV in Swimming Pool and Spa Building


Description

Notes

Unit Code

Core

This is a sample training program appropriate for a person interested in trade contracting for swimming pool and spa construction.




BSBCUS301B

BSBSMB406A

CPCCBC4002A

CPCCBC4003A

CPCCBC4004A

CPCCBC4005A







35

60

40

40

60

40

CPCCBC4007A

CPCCBC4008B

40

40

CPCCBC4009B

CPCCBC4012B

CPCCBC4014A

CPCCBC4018A

CPCCBC4024A

CPCCBC4034A

CPCCBC4048A

CPCCBC4049A

CPCCBC4050A









Apply building codes and standards to the construction process for swimming pools and spas

Apply structural principles to construction of swimming pools and spas

Select, procure and store construction materials for swimming pools and spa projects

50

30

40

40

20

40

40

30

24

Electives

CPCCBC4021A Minimise waste on the building and construction site

Total hours

20

689

Page 86 of 110

CPCPFS4023A

CPCPFS4024A

CPCPFS4025A

Occupation/

Work Function

Fire Services Supervisor

Qualification Title Certificate IV in Plumbing and Services specialising in the Fire Services stream


Description

Notes

Unit Code

Core

This sample training program is appropriate for experienced fire operators with responsibility for project design and supervision in the Fire Services stream. This sample addresses the Victorian licence requirements for water and the licence endorsement for fire services.




BSBCUS301B

BSBOHS403B

CPCCBC4012B

CPCCBC4015A

CPCPCM4011A

CPCPCM4012A

CPCPCM4013A

CPCPCM4014A

Electives

BSBSMB401A

CPCCBC4008B

CPCPFS4021A

CPCPFS4022A


Identify hazards and assess OHS risks




Estimate and cost work

Produce 2-D architectural drawings using CAD software

Prepare simple sketches and drawings

Establish legal and risk management requirements of small business



Commission and maintain special hazard fire suppression systems

Commission fire system pumpsets


Commission fire alarm and detection system interface devices

Total hours

60

40

16

20

16

50

60

531

20

24

40

35

60

30

40

20

Page 87 of 110


Function

Air Conditioning Technician

Qualification Title Certificate IV in Plumbing and Services specialising in Air Conditioning and

Mechanical Services stream


Description This sample training program is appropriate for an experienced plumbing service operators with responsibility for project design and supervision (Air conditioning and mechanical services stream) This sample addresses the Victorian licence requirements for the Mechanical Services, Water, Sanitary and Gas Fitting streams.

Notes

Unit Code

Core




BSBCUS301B

BSBOHS403B

CPCCBC4012B

CPCCBC4015A

CPCPCM4011A

CPCPCM4012A

CPCPCM4013A

CPCPCM4014A

Electives

BSBSMB401A









60

CPCPGS4011B

CPCPMS4011B

CPCPMS4022A

CPCPWT4011B

CPCPWT4022A

CPCPSN4011B



Design, size and lay out heating and cooling systems

Commission air and water systems

Design and size heated and cold water services and systems

Commission and maintain backflow prevention devices


Total hours

24

40

40

20

35

60

30

20

60

160

132

80

20

50

831

Page 88 of 110

Occupation/

Work Function

Plumbers who manage a plumbing business

Qualification Title Certificate IV in Plumbing and Services specialising in Plumbing Services

Management stream


Description This sample training program is appropriate for a person who wishes to manage a plumbing business.

Notes For information on selecting alternative electives to those listed in the sample qualification refer to the (CPC08) Construction, Plumbing and Services


Unit Code

Core


BSBOHS403B

CPCCBC4012B

CPCPCM4011A

CPCPCM4012A

BSBCUS301B

BSBSMB401A







60

30

24

40

35

60

BSBSMB402A

BSBSMB404A

BSBSMB405B

CPCCBC4034A

Plan small business finances

Undertake small business planning

Monitor and manage small business operations


50

50

45

40

Electives

CPCPGS4011B

CPCPMS4011B

CPCPRF4011B

CPCPSN4011B

CPCPWT4011B






Total hours

60

160

60

50

80

844

Page 89 of 110


Function

Specialist Plumbing Services Tradespersons and Operators

Qualification Title Certificate IV in Plumbing Services specialising in Operations stream


Description

Notes

Unit Code

Core

This sample training program is appropriate for specialist plumbing services tradespersons and operators seeking to deepen their technical skills (Plumbing and services – Operations stream). This sample addresses the Victorian licence requirements for Water, Drainage, Sanitary, Roofing, Mechanical Services and Gas Fitting streams.




BSBOHS403B

CPCCBC4012B

CPCPCM4011A

CPCPCM4012A

BSBSMB401A






60

30

24

40

60

CPCPDR4011B

CPCPDR4012B

CPCPDR4013B

CPCPGS4011B

CPCPRF4011B

CPCPSN4011B

CPCPWT4011B

Electives

CPCPFS4021A








60

50

80

40

45

35

60

16

CPCPFS4024A

CPCPMS4011B




Total hours

50

160

810

Page 90 of 110


Function

Specialist Hydraulic Designer

Qualification Title Certificate IV in Plumbing and Services specialising in Hydraulic Service Design


Description

Notes

Unit Code

Core

This sample training program is appropriate for specialist hydraulic consultants wanting to design hydraulic systems.




BSBOHS403B

CPCCBC4012B

CPCPCM4011A

CPCPCM4012A

CPCCBC4034A






60

30

24

40

40

CPCPDR4011B

CPCPDR4012B

CPCPDR4013B

CPCPSN4011B

CPCPWT4011B

Electives

CPCPFS4021A






40

45

35

50

80

16

CPCPFS4024A

CPCPCM4013A

CPCPGS4011B

BSBSMB401A






Total hours

50

40

60

60

670

Page 91 of 110


Function

Building Surveyor

Qualification Title Diploma of Building Surveying


Description This sample training program is appropriate for a person interested in working as a building surveyor in the building and construction industry.

Notes

Unit Code

Core




BSBADM506B

BSBITS401B

CHCCOM403A

CHCCOM504B

Manage business document design and development

Maintain business technology

Use targeted communication skills to build relationships

Develop, implement and promote effective communication

80

40

55

80

CPCCSV5001A

CPCCSV5002A

CPCCSV5003A

CPCCSV5004A

CPCCSV5005A






100

72

90

36

36

CPCCSV5006A

CPCCSV5007A

36

72

CPCCSV5008A

CPCCSV5009A

CPCCSV5010A

CPCCSV5011A

CPCCSV5012A

CPCCSV5013A

CPCCSV5014A

CPCCSV5015A

ICAICT102A

ICAICT103A

ICAICT105A

ICAICT201A

ICAICT210A











Operate word-processing applications

Use, communicate and search securely on the internet

Operate spreadsheet applications

Use computer operating systems and hardware

Operate database applications

Total hours

36

36

36

72

36

36

36

36

30

50

30

60

40

1231

Page 92 of 110


Function

Builder

Qualification Title Diploma of Building and Construction (Building)


Description

Notes

Unit Code

Core

This sample training program is appropriate for a person interested in working as a builder in the building and construction industry, including selecting contractors, overseeing the work and its quality, and liaising with clients.




BSBOHS504B

BSBPMG505A

BSBPMG508A

CPCCBC4001A

Apply principles of OHS risk management

Manage project quality

Manage project risk


40

40

40

40

CPCCBC4003A

CPCCBC4004A

40

60

CPCCBC4010B

CPCCBC4013A

CPCCBC5001B

CPCCBC5002A

CPCCBC5003A

CPCCBC5010B

CPCCBC5018A








Manage construction work

Apply structural principles to the construction of medium rise buildings

160

20

200

60

200

150

300

Electives

CPCCBC4009B

CPCCBC5005A

CPCCBC5009A

BSBCUS501C

CPCCBC5012A




Manage quality customer service

Manage the application and monitoring of energy conservation and management practices and processes

Total hours

50

40

140

40

150

1770

Page 93 of 110


Function

Qualification Title Diploma of Building and Construction (Management)


Description

Senior Manager – Project Manager, Construction Manager, Estimating Manager and Sales Manager

Notes

Unit Code

Core

This sample training program is appropriate for a person interested in working as a senior manager in the building and construction industry.




BSBFIM501A

BSBHRM402A

BSBMGT515A

BSBOHS504B

Manage budgets and financial plans

Recruit, select and induct staff

Manage operational plan


Ensure team effectiveness

70

50

60

40

60 BSBWOR502B

Electives

CPCCBC5001B 200

CPCCBC5002A



60

CPCCBC5003A

CPCCBC5005A

CPCCBC5007B

CPCCBC5011A

CPCCBC5013A



Administer the legal obligations of a building or construction contractor

Manage environmental management practices and processes in building and construction

Develop professional technical and legal reports on building and construction projects

Total hours

200

40

100

150

40

1070

Page 94 of 110

Occupation/

Work Function

Senior Plumber/Fire Services Specialist

Qualification Title Diploma of Plumbing and Services specialising in Fire Services stream


Description

Notes

Unit Code

Core

This sample training program is designed to meet the needs of specialist plumbing professionals in the Fire Services sector of the plumbing and services industry involved in Fire System Design roles.




BSBOHS504B

BSBPMG505A

CPCCSV6010A

CPCPFS5010A




Design fire-compliant hydraulic services

40

40

40

340

Design fire sprinkler systems

Design fire hydrant and hose reel systems

440

384

CPCPFS5011A

CPCPFS5012A

Electives

CPCPPS5009B

CPCPPS5030A

CPCPPS5011B

CPCPPS5014A

BSBPMG508A

CPCCBC4034A


Design pump systems



Manage project risk


Total hours

20

30

40

8

40

40

1462

Page 95 of 110


Function

Senior Plumber/Air Conditioning and Mechanical Services Specialist

Qualification Title Diploma of Plumbing and Services specialising in the Mechanical Services stream


Description This sample training program is designed to meet the needs of specialist and senior plumbers, fire services professionals and air conditioning and mechanical services professionals with advanced technical skill requirements.

Notes

Unit Code

Core




BSBOHS504B

BSBPMG505A

CPCPMS5010A

CPCPMS5011A

CPCPMS5012A

CPCPMS5013A

Electives

CPCPPS5009B

CPCPPS5030A

CPCPPS5011B

CPCPPS5014A

BSBPMG508A

CPCCBC4034A



Design steam generation and distribution systems

Design air conditioning and ventilation systems

Design sound attenuated hydraulic services

Design hydronic heating and cooling systems


Design pump systems



Manage project risk


Total hours

40

40

50

50

45

90

20

30

40

8

40

40

493

Page 96 of 110

Occupation/

Work Function

Fire System Designer specialising in Water-Based Systems

Qualification Title Diploma in Fire Systems Design – Water-Based Systems stream


Description This sample training program is designed to meet the needs of specialist plumbing professionals in the Fire Systems Design sector of the plumbing and services industry involved in Water-Based Fire System Design roles.



Unit Code

Core


CPCCOHS2001A

CPCSFS5001A

CPCSFS5002A

CPCSFS5005A





20

40

40

60

Specialist

CPCPCM4013A

CPCSFS5003A

40

40

CPCSFS5006A

CPCSFS5007A

CPCSFS5009A

CPCSFS5010A

CPCSFS5011A

CPCSFS5013A


Develop plans and methodology for fire systems design projects







Total hours

120

80

120

60

60

80

760

Page 97 of 110

Occupation/

Work Function

Fire Systems Designer specialising in Detection and Warning Systems

Qualification Title Diploma of Fire Systems Design – Detection and Warning System stream


Description This sample training program is designed to meet the needs of specialist plumbing professionals in the Fire Systems Design sector of the plumbing and services industry involved in Fire Detection and Warning Design roles.



Unit Code

Core


CPCCOHS2001A

CPCSFS5001A

CPCSFS5002A

CPCSFS5005A





20

40

40

60

Specialist

CPCPCM4013A

CPCSFS5003A

40

40

CPCSFS5008A

CPCSFS5011A

CPCSFS5013A






120

60

80

Electives

BSBCUS501C

CPCCBC4012B

CPCCSV5009A




Total hours

40

30

36

606

Page 98 of 110

Occupation/

Work Function

Fire System Designer specialising in Annual Certifier Systems

Qualification Title Diploma of Fire Systems Design – Annual Certifier stream


Description This sample training program is designed to meet the needs of specialist plumbing professionals in the fire sector of the plumbing and services industry involved in Fire System Certifier roles.



Unit Code

Core


CPCCOHS2001A

CPCSFS5001A

CPCSFS5002A

CPCSFS5005A





20

40

40

60

Specialist

CPCPCM4013A

CPCSFS5003A

40

40

CPCSFS5006A

CPCSFS5007A

CPCSFS5009A

CPCSFS5010A

CPCSFS5011A

CPCSFS5013A









Total hours

120

80

120

60

60

80

760

Page 99 of 110

Occupation/

Work Function

Fire Systems Designer specialising in Detection and Warning Systems

Qualification Title Diploma of Fire Systems Design – Detection and Warning System stream


Description This sample training program is designed to meet the needs of specialist plumbing professionals in the Fire Systems Design sector of the plumbing and services industry involved in Fire Detection and Warning Design roles.



Unit Code

Core


CPCCOHS2001A

CPCSFS5001A

CPCSFS5002A

CPCSFS5005A





20

40

40

60

Specialist

CPCPCM4013A

CPCSFS5003A

40

40

CPCSFS5008A

CPCSFS5011A

CPCSFS5013A






120

60

80

Electives

CPCCBC4012B

CPCCSV5009A

BSBCUS501C




Total hours

30

36

40

606

Page 100 of 110

Occupation/

Work Function

Fire System Designer specialising in Annual Certifier Systems

Qualification Title Diploma of Fire Systems Design – Annual Certifier stream


Description This sample training program is designed to meet the needs of specialist plumbing professionals in the fire sector of the plumbing and services industry involved in Fire System Certifier roles.



Unit Code

Core


CPCCOHS2001A

CPCSFS5001A

CPCSFS5002A

CPCSFS5005A





20

40

40

60

Specialist

BSBAUD504B

CPCCBC4012B

CPCSFS5014A

CPCSFS5015A

Report on a quality audit


Conduct annual fire systems certification inspections

Assess documentation for annual fire systems certification inspections

60

30

100

60

Electives

CPCCSV5009A

CPCCBC5009A

36

140

CPCSFS5003A

BSBCUS501C





Total hours

40

40

666

Page 101 of 110

Occupation/

Work Function

Hydraulics Design Consultant

Qualification Title Diploma of Hydraulics Services Design


Description

Notes

Unit Code

Core

This sample is designed to meet the needs of specialist plumbing professionals in the Hydraulic Design sector who design plumbing and services systems for residential and commercial buildings.




BSBITU201A

BSBITU202A

BSBITU301A

BSBWRT401A

CPCCBC4012B

CPCCBC4034A

Produce simple word processed documents


Create and use databases

Write complex documents



60

30

30

50

30

40

CPCPCM4013A

CPCPCM4014A

CPCPCM5010A

CPCPCM5011A

CPCPCM5012A

CPCPCM5013A

CPCPDR4011B

CPCPDR4012B



Design complex sanitary plumbing and drainage systems

Design complex cold water systems

Design complex stormwater and roof drainage systems

Design complex (non-solar) heated water systems



55

75

40

45

40

20

70

70

CPCPDR4013B

CPCPFS4024A

CPCPGS4011B

CPCPPS5000B

CPCPPS5001B

CPCPPS5002B

CPCPPS5023A

CPCPPS5024A

CPCPPS5025A




Design gas bulk storage systems

Design industrial gas systems

Design gas reticulation systems

Design solar water heating systems

Conduct a water audit and identify water-saving initiatives

Design grey water re-use systems

300

160

45

35

35

35

50

60

80

Page 102 of 110

Unit Code

CPCPPS5026A

CPCPPS5028A

CPCPPS5030A

CPCPPS5032A

CPCPSN4011B

CPCPWT4011B

CPCSFS5001A

CPCSFS5007A

Electives

CPCPPS5014A

CPCPPS5015B

CPCSUS5001A

Unit Title

Design rainwater collection, storage, distribution and re-use systems

Design trade waste pre-treatment systems

Design pump systems

Design siphonic stormwater drainage systems






Inspect plumbing and drainage systems

Develop workplace policies and procedures for sustainability

Total hours

8

32

50

1920

Hours

35

80

40

80

30

30

30

50

Page 103 of 110

Occupation/

Work Function

Senior Building Surveyor

Qualification Title Advanced Diploma of Building Surveying


Description

Notes

Unit Code

Core

This sample training program is appropriate for a person interested in working as a senior surveyor in the building and construction industry.




BSBADM506B

BSBITS401B

BSBMGT502B

CHCCOM403A

CHCCOM504B

Manage business document design and development

Maintain business technology

Manage people performance

Use targeted communication skills to build relationships

Develop, implement and promote effective workplace communication

80

40

70

55

80

CPCCSV5001A

CPCCSV5002A

CPCCSV5003A

CPCCSV5004A

CPCCSV5005A

CPCCSV5006A

CPCCSV5007A








100

72

90

36

36

36

72

CPCCSV5008A

CPCCSV5009A

CPCCSV5010A

CPCCSV5011A

CPCCSV5012A

CPCCSV5013A

CPCCSV5014A

CPCCSV5015A

CPCCSV6001A

CPCCSV6002A









Assess the construction of buildings up to three storeys

Produce working drawings for buildings up to three storeys

36

36

36

72

36

36

36

36

72

40

Page 104 of 110

Unit Code

CPCCSV6003A

CPCCSV6004A

CPCCSV6005A

CPCCSV6006A

CPCCSV6007A

CPCCSV6008A

CPCCSV6009A

CPCCSV6010A

CPCCSV6011A

CPCCSV6012A

CPCCSV6013A

CPCCSV6014A

CPCCSV6015A

CPCCSV6016A

ICAICT102A

ICAICT103A

ICAICT105A

ICAICT201A

ICAICT210A

LGAPLEM502A

LMFFT4010B

Unit Title

Assess construction faults in buildings up to three storeys

Apply footing and geomechanical design principles to buildings up to three storeys

Evaluate services layout and connection methods for residential and commercial buildings up to three storeys

Evaluate the use of concrete for residential and commercial buildings up to three storeys

Assess structural requirements for buildings up to three storeys

Apply building codes and standards to buildings up to three storeys

Implement performance-based codes and risk management principles for buildings up to three storeys


Apply legal procedures to building surveying

Facilitate community development consultation

Coordinate building refurbishment

Manage and plan land use

Analyse and present building surveying research information

Apply building surveying procedures to buildings up to three storeys

Operate word-processing applications

Use, communicate and search securely on the internet

Operate spreadsheet applications

Use computer operating systems and hardware

Operate database applications

Apply ecologically sustainable development principles to the built environment

Identify and calculate production costs

Total hours

40

40

72

72

40

90

90

40

40

40

72

Hours

40

40

40

30

50

30

60

40

60

36

2265

Page 105 of 110

Occupation/

Work Function

Senior Construction Manager

Qualification Title Advanced Diploma of Building and Construction (Management)


Description

Notes

Unit Code

Core

This sample training program is appropriate for senior managers within building, construction and services firms typically working in larger organisations and managing more complex projects and processes.




BSBOHS603B

CPCCBC6001B

CPCCBC6003A

CPCCBC6018A

Analyse and evaluate OHS risk

Apply building codes and standards to the construction process for large building projects

Establish, maintain and review contract administration procedures and frameworks

Manage processes for complying with legal obligations of a building or construction contractor

40

100

60

60

Electives

CPCCBC6002A

CPCCBC6010A

200

200

CPCCBC6011A

CPCCBC6013A

CPCCBC6014A

CPCCBC6017A

Generate and direct the development of new projects

Plan, develop and implement building or construction energy conservation and management practices and processes

Establish systems to develop and monitor building and construction costs

Evaluate materials for multi-storey buildings

Apply structural principles to the construction of large, high rise and complex buildings

Evaluate services layout and connection methods for the planning of large building projects

Total hours

80

60

100

100

1000

Page 106 of 110

Occupation/

Work Function

Senior Fire Systems Design Manager

Qualification Title Vocational Graduate Certificate in Fire Systems Management


Description

Notes

Unit Code

Core

This qualification supports the role of senior managers in the Fire Systems

Design sector who perform wide-ranging tasks while also exercising in-depth technical skills and knowledge, particularly in the area of special hazard fire suppression and detection systems.




CPCMCM7001A

CPCSFS7001A

60

140

CPCSFS7002A

CPCSFS7003A

Plan and manage complex projects

Define scope of and initiate special hazard fire systems design projects

Analyse, design and evaluate complex special hazard fire systems

Develop and submit tenders for fire systems design solutions

Total hours

80

60

340

Page 107 of 110

CONTACTS AND LINKS

Industry Skills Council (ISC)

Construction and

Property Services

Industry Skills

Council (CPSISC)

This ISC is responsible for developing the CPC08

Construction, Plumbing and

Services Training Package and can be contacted for further information. You can also source copies of the Training Package and support material.

Address: PO Box 151  

BELCONNEN ACT 2616

Phone/fax: (02) 6253 0002

Email: info@cpsisc.com.au

Web: http://www.cpsisc.com.au/

National Register for VET in Australia

Training.gov.au

(TGA)

TGA is the Australian governments’ official National Register of information on Training Packages, qualifications, courses, units of competency and RTOs. training.gov.au

Australian Government

The Department of

Industry, Innovation,

Science, Research and Tertiary

Education (DIISRTE)

DIISRTE provides a range of services and resources to assist in delivery of Training Packages.

Search the DIISRTE website for links to a range of relevant resources and publications. http://www.innovation.gov.au

You may also find Department of Education

Employment and Workplace Relations website of use http://www.deewr.gov.au

State Government

Department of

Education and Early

Childhood

Development

Higher Education and Skills Group

Higher Education and Skills Group is responsible for funding and the implementation of Vocational

Education and Training (VET) in

Victoria, including Apprenticeships and Traineeships.

State VET Regulatory Authority

Victorian

Registration and

Qualifications

Authority (VRQA)

The VRQA is a statutory authority responsible for the registration of education and training providers in

Victoria to ensure the delivery of quality education and training.

General information: www.skills.vic.gov.au

Approved Training Schemes: http://www.skills.vic.gov.au/corporate/public ations/brochures-and-factsheets/apprenticeships-and-traineeships-invictoria-industry-guides

Curriculum Maintenance Manager (CMM)

Building Industries –

Building and

Construction, Civil

Construction,

Furnishing and

Water

The CMM service is provided by

Executive Officers located within

Victorian TAFE institutes on behalf of Higher Education and Skills

Group.

Name: Tom Vassallo

Address: Holmesglen Institute of TAFE

PO Box 42

HOLMESGLEN VIC 3148

Phone/fax: (03) 9564 1987

Email: tom.vassallo@holmesglen.edu.au www.vrqa.vic.gov.au

Phone: 03 9637 2806

Page 108 of 110

National VET Regulatory Authority

Australian Skills

Quality Authority

(ASQA)

ASQA is the national regulator for

Australia’s VET sector vocational education and training sector.

ASQA regulates courses and training providers to ensure nationally approved quality standards are met. www.asqa.gov.au

Info line: 1300 701 801

Industry Regulatory Body

Building Commission The Building Commission is a statutory authority that oversees the building control system in Victoria

Energy Safe Victoria The Industry Regulatory Body can provide advice on licensing, legislative or regulatory requirements, which may impact on the delivery of training or the issuance of qualifications in this

Training Package.

Address: PO Box 536

MELBOURNE VIC 3001

Phone/fax: 1300 815 127

Web: www.buildingcommission.com.au

Phone: (03) 9203 9700

Email: info@esv.vic.gov.au

Web: http://www.esv.vic.gov.au/

WorkSafe

Plumbing Industry

Commission (PIC)

The PIC is a Victorian Government statutory authority that provides outcomes through the plumbing regulatory system

Address: PO Box 536

MELBOURNE VIC 3001

Phone/fax: 1300 815 127

Web: www.pic.vic.gov.au

Info line: 1800 136 089

Web: www.worksafe.vic.gov.au

WorkSafe Victoria

Other contacts

Master Builders

Association of Victoria

WorkSafe needs to provide written verification before High Risk Work

Units can be added to an RTO’s scope of registration.

Housing industry

Association – Victoria

Construction,

Forestry, Mining and

Energy Union

(CFMEU)

Creative Commons

Website: www.mbav.com.au

Phone: (03) 9411 4555

Website: www.hia.com.au

Phone: (03) 9280 8200

Website: www.cfmeuvic.com.au

Phone: (03) 9341 3444

Construction and

Property Services

Industry Skills Council

Resource Generator

Website: www.creativecommons.org.au/

Website: www.cpsisc.com.au

Phone: (02) 6253 0002

Website: www.resourcegenerator.gov.au

Page 109 of 110

GLOSSARY

Code

Title

Unit Code

Unit Title

Nominal Hours

Scope of Registration

Nationally endorsed Training Package qualification code.

Nationally endorsed Training Package qualification title.

Nationally endorsed Training Package unit code.

Nationally endorsed Training Package unit title.

The anticipated hours of supervised learning or training deemed necessary to conduct training and assessment activities associated with the program of study. These hours are determined by the

Victorian State Training Authority. Nominal hours may vary for a qualification depending on the units of competency selected.

Scope of registration specifies the AQF qualifications and/or units of competency the training organisation is registered to issue and the industry training and/or assessment services it is registered to provide.

Page 110 of 110

Victorian Purchasing Guide for CPC08 Construction, Plumbing and

Victorian Purchasing Guide for

CPC08 Construction, Plumbing and Services

Training Package

Version No 8

March 2013

Related documents

Products

Support

Victorian Purchasing Guide for CPC08 Construction, Plumbing and