SECTION 14 27 00
CUSTOM ELEVATOR CABS
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2011 - 2015 ARCAT, Inc. - All rights reserved
PART 1 GENERAL
1.1
SECTION INCLUDES
A.
1.2
1.3
RELATED SECTIONS
A.
Section 09 60 00 - Flooring.
B.
Section 14 20 00 - Elevators.
C.
Section 26 05 00 - Common Work Results for Electrical.
D.
Section 26 50 00 - Lighting.
REFERENCES
A.
1.4
Pre-engineered elevator interior finish system including the following:
1.
Rear wall panels.
2.
Side wall panels.
3.
Return wall panels.
4.
Handrails.
5.
Bumpers.
6.
Corner/flat reveals.
7.
Panel binders.
8.
Protective pads.
9.
Suspended ceiling.
10.
Ceiling lighting.
ASTM International (ASTM): ASTM E 84 - Standard Test Method for Surface
Burning Characteristics of Building Materials.
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Provide manufacturer's data sheets on each product to be used.
C.
Shop Drawings: Details of construction, including relationship with adjacent
materials. Include installation and maintenance instructions.
14 27 00-1
D.
1.5
1.6
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Minimum 10 years experience in manufacture of
architectural surface materials and fabrication of elevator cab interiors.
B.
Installer Qualifications: Minimum 3 years experience in the installation of elevators.
DELIVERY, STORAGE, AND HANDLING
A.
1.7
Deliver materials to installation site in manufacturer's original packaging. Handle
products in accordance with manufacturer's instructions. Store in dry, secure
location, protected against direct sunlight and excessive heat. Protect finished
surfaces.
PROJECT CONDITIONS
A.
1.8
Verification Samples: For each finish product specified, two samples, minimum size
2-1/2 inches (63 mm) by 1-1/2 inches (38 mm).
Maintain environmental conditions (temperature, humidity and ventilation) within
limits recommended by manufacturer for optimum results. Do not install products
under environmental conditions outside manufacturer's limits.
WARRANTY
A.
Warranty: Provide manufacturer's standard one-year warranty against defects and
workmanship, from the date of Substantial Completion.
PART 2 PRODUCTS
2.1
2.2
MANUFACTURERS
A.
Acceptable Manufacturer: SnapCab, which is located at: 175 Titus Ave.; Warrington,
PA 18976; Toll Free Tel: 888-766-7834; Tel: 215-343-7040; Fax: 877-855-3714;
Email: sales@SnapCab.com; Web: www.SnapCab.com
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of
Section 01 60 00 - Product Requirements.
WALL PANELS AND SUSPENDED CEILING
A.
Elevator Interior Wall Panel System, Corning Gorilla Glass Thin Panel Type:
1.
Description: Corning Gorilla Glass adhered to solid phenolic Thin Panel
System comprised of removable wall panels with rabbeted joints, 1/8 inch (3
mm) black shadow lines set into surface, toe kicks, top caps with sight and
vent guards, and corner/flat reveals.
2.
Panel Model: Precision.
3.
Panel Model: Pure.
4.
Panel Model: Fusion.
5.
Panel Model: Clarity.
6.
Panel Model: Brilliant.
7.
Panel Model: Prism.
8.
Panel Model: Radiant.
B.
Elevator Interior Wall Panel System, Thin Solid Phenolic Panel Type:
1.
Description: Thin Solid Phenolic Panel System comprised of removable wall
14 27 00-2
2.
3.
4.
5.
6.
7.
8.
9.
10.
panels with rabbeted joints, 1/8 inch (3 mm) black shadow lines set into
surface, toe kicks, top caps with sight and vent guards, and corner/flat
reveals.
Panel Model: Tundra.
Panel Model: Resilient.
Panel Model: Endurance.
Panel Model: Century.
Panel Model: Titan.
Panel Model: Guardian.
Panel Model: Denali.
Panel Model: Vigor.
Panel Model: Custom Design.
C.
Elevator Interior Wall Panel System, Interlocking Panel Type:
1.
Description: Interlocking panel system comprised of removable wall panels
with interlocking joints, 1/8 inch (3 mm) black shadow lines set into surface,
toe kicks, top caps with sight and vent guards, panel binders at exposed
panel edges near doors and corner/flat reveals.
2.
Panel Model: Milano III.
3.
Panel Model: Milano II.
4.
Panel Model: Milano I.
5.
Panel Model: Sahara II.
6.
Panel Model: Executive II.
7.
Panel Model: Sahara I.
8.
Panel Model: Imperial III.
9.
Panel Model: Industrial I.
10.
Panel Model: Imperial I.
11.
Panel Model: Vibrant.
12.
Panel Model: Acero.
13.
Panel Model: Legend III.
14.
Panel Model: Sierra I.
15.
Panel Model: Legend I.
16.
Panel Model: Aria II.
17.
Panel Model: Harmony.
18.
Panel Model: Modern I.
19.
Panel Model: Contemporary I.
20.
Panel Model: Summit I.
21.
Panel Model: Modern II.
22.
Panel Model: Passage.
23.
Panel Model: Corporate I.
24.
Panel Model: Corporate II.
25.
Panel Model: Apex I.
26.
Panel Model: Apex II.
27.
Panel Model: Edge.
28.
Panel Model: Summit II.
29.
Panel Model: Classic I.
30.
Panel Model: Classic II.
31.
Panel Model: Heritage.
32.
Panel Model: Ultra I.
33.
Panel Model: Contemporary II.
34.
Panel Model: Custom design.
D.
Elevator Interior Suspended Ceiling System:
1.
Description: Suspended ceiling with adjustable mounting legs and removable
panel for access to escape hatch.
2.
Ceiling Style: Aurora Ceiling.
14 27 00-3
3.
4.
5.
6.
7.
2.3
Ceiling Style: Island Ceiling.
Ceiling Style: Modular Ceiling.
Ceiling Style: Venture Ceiling.
Ceiling Style: Frame Ceiling.
Ceiling Style: Economy Ceiling.
MATERIALS
A.
Wall Panel Core Type 1, for Corning Gorilla Glass Cabs: Solid phenolic, 3/8 inch (10
mm) thickness high pressure laminate, non-porous, with integral decorative surface,
Class B or better fire rated as per ASME E 84 and LEED compliant:
1.
Wall Panel Face for Corning Gorilla Glass Cabs: Glass: .06 inch (1.5 mm)
thickness Gorilla Glass, Class A fire rated as per ASME E 84 and LEED
compliant, as manufactured by Corning.
a.
Colors, adhered to back face of glass:
1)
Finish: Beige.
2)
Finish: Bright White.
3)
Finish: Brick Red.
4)
Finish: Burnt Sienna.
5)
Finish: Dark Blue.
6)
Finish: Dark Grey.
7)
Finish: Dusk Blue.
8)
Finish: Kiwi Green.
9)
Finish: Light Grey.
10) Finish: Linen.
11) Finish: Noir Black.
12) Finish: Oyster Grey.
13) Finish: Pale Green.
14) Finish: Sky Blue.
15) Finish: Taupe.
16) Finish: Selected Pantone Color.
17) Finish: Circles Split Pattern.
18) Finish: Multi-Bulbs Pattern.
19) Finish: Multi-Circles Pattern.
20) Finish: Squares Stacked Pattern.
21) Finish: Vines Pattern.
22) Finish: Bulbs Pattern.
23) Finish: Chevron Pattern.
24) Finish: Circles Pattern.
25) Finish: Circles Stacked Pattern.
26) Finish: Mesh Pattern.
27) Finish: Multi-Drops Pattern.
28) Finish: Multi-Diamonds Pattern.
29) Finish: Ovals Pattern.
30) Finish: Triangles Stacked Pattern.
31) Finish: Custom Designed Pattern.
32) Finish: Carrera Marble Image.
33) Finish: Maple Burl Image.
34) Finish: Opalescent Blue Image.
35) Finish: Natural End Grain Bamboo Image.
36) Finish: Natural Rift Cut Oak Image.
37) Finish: Customer Supplied Image.
b.
Wilsonart Compact: For Pure, Fusion, Brilliant and Radiant cab models,
refer to specification section Wall Panel Core with Integral Decorative
Surface, for Wilsonart Compact finish selections. Add selected type
and color here.
14 27 00-4
c.
d.
Stainless Steel: For Precision, Fusion, Clarity and Prism cab models,
refer to specification section Stainless Steel Face, for smooth and
textured stainless steel selections. Add selected finish here.
Moz Metal: For Vibrant cab model, refer to specification section Moz,
for Moz metal finish selections. Add selected pattern and color here.
B.
Wall Panel Core Type 2, with Integral Decorative Surface:
1.
Core with Face Type 1: Compact, 3/8" (10 mm) thickness fire rated high
pressure laminate, non-porous, with integral decorative surface, Class B or
better fire rated as per ASME E 84 and LEED compliant, as manufactured by
Wilsonart.
a.
Decorative Surface, in Matte Finish:
1)
Finish: Color as selected from manufacturer's standard product
line.
2.
Core with Face Type 2: Virtuon CGF grade, 3/8 inch (10 mm) thickness fire
rated high pressure laminate, non-porous, with integral decorative surface,
Class A fire rated as per ASME E 84 and LEED compliant, as manufactured
by Trespa.
a.
Decorative Surface, in Satin Finish:
1)
Finish: Color as selected from manufacturer's standard product
line.
3.
Core with Face Type 3: Athlon CGF grade, 3/8 inch (10 mm) thickness high
pressure laminate, non-porous, with integral decorative surface, Class B or
better fire rated as per ASME E 84 and LEED compliant, as manufactured by
Trespa.
a.
Decorative Surface, in Quartz Finish:
1)
Finish: Color as selected from manufacturer's standard product
line.
C.
Wall Panel Core Type 3: 5/8 inch (15 mm) minimum thickness fire-rated resin
particle board, Class B or better fire rated as per ASTM E 84. Panel backer sheet
and adhesives as per manufacturer to achieve fire rating as tested. Panel core to be
type for plastic laminate, wood veneer or metal face.
D.
Wall Panel Core Type 4: 1/2 inch (12 mm) thickness fire-rated resin medium density
fiberboard, Class B or better fire rated as per ASTM E 84. Panel backer sheet and
adhesives as per manufacturer to achieve fire rating as tested. Panel core to be type
for mirror or stone face.
E.
Wall Panel Face:
1.
Wilsonart Laminate Face: Standard finish, 0.039 inch (0.99 mm) minimum
thickness Horizontal Grade Postforming Laminate conforming to NEMA
standard HGF, with Class B or better fire rating when laminated to fire-rated
particle board as per ASTM E 84.
a.
Pattern, color and finish as selected from manufacturer's standard
product line.
b.
Pattern, color and finish as indicated on the Drawings.
c.
Layer: Laminate face on Layer 2.
d.
Layer: Laminate face on Layer 3.
e.
Layer: Laminate face on Layer 4.
f.
Layer: Laminate face on Layer 5.
g.
Layer: Laminate face on Layer 6.
2.
Stainless Steel Face:
a.
Smooth Surface Panels: Stainless steel, 20 gauge. Panel assembly to
be Class B or better fire rated as per ASTM E 84.
1)
Finish: No. 4 Satin.
14 27 00-5
3.
2)
Finish: Random Swirl.
3)
Finish: RND Non-Directional.
b.
Rigidized Textured Metal Surface Panels: Stainless steel, 20 gauge.
Assembly to be Class B or better fire rated as per ASTM E 84.
1)
Finish: 5WL.
2)
Finish: 2WL.
3)
Finish: 3ND.
4)
Finish: 4LB.
5)
Finish: 6SL.
6)
Finish: 1CS.
7)
Finish: 5HR.
8)
Finish: 2FL.
9)
Finish: 1SLG.
10) Finish: 1NA.
11) Finish: 6HC.
12) Finish: 1HM.
13) Finish: 6WL.
14) Finish: 7DL.
15) Finish: RTP.
16) Finish: 60LTH.
17) Finish: Sandtex.
18) Finish: Linen.
19) Finish: 3SQ.
20) Finish: Dull Beed Blast.
21) Finish: DuoTex 1SL-Sandtex.
22) Finish: DuoTex 1SL-Linen BA.
23) Finish: 2FL Grey PSP.
24) Finish: 2" Overlay.
25) Finish: 6HC Orange NPSP.
26) Finish: 6SL Black PSP.
27) Finish: 6WL Blue Mirror NPSC.
28) Finish: Pattern/Color: As selected from manufacturer's standard
product line.
c.
Layer: Stainless steel face on Layer 2.
d.
Layer: Stainless steel face on Layer 3.
e.
Layer: Stainless steel face on Layer 4.
f.
Layer: Stainless steel face on Layer 5.
g.
Layer: Stainless steel face on Layer 6.
Aluminum Face:
a.
Moz: Smooth surface panels of aluminum, 0.040 inch (1.01 mm)
thickness, satin finish. Panel assembly to be Class B or better fire rated
as per ASTM E 84.
1)
Pattern/Color: Bamboo/Clear.
2)
Pattern/Color: Clouds/Clear.
3)
Pattern/Color: Kelp/Clear.
4)
Pattern/Color: Ripples/Clear.
5)
Pattern/Color: Waves/Clear.
6)
Pattern/Color: Bamboo/Blendz #442.
7)
Pattern/Color: Bamboo/Brass.
8)
Pattern/Color: Bamboo/Champagne.
9)
Pattern/Color: Clouds/Light Champagne.
10) Pattern/Color: Clouds/Slate Green.
11) Pattern/Color: Course/Light Champagne.
12) Pattern/Color: Fog/Graphite.
13) Pattern/Color: Graphix Cosmos/LG Aurora.
14) Pattern/Color: Graphix Flare/Mars.
14 27 00-6
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
4.
Pattern/Color: Graphix Morocco/Smoke.
Pattern/Color: Kelp/Blendz #453.
Pattern/Color: Kelp/Indigo.
Pattern/Color: Linen/Khaki.
Pattern/Color: Pinstripe/Champagne.
Pattern/Color: Pinstripe/Royal Blue.
Pattern/Color: Ripples/Ebony.
Pattern/Color: Waterslide/Cabernet.
Pattern/Color: Waterslide/Electric Red.
Pattern/Color: Waterfall/Graphite.
Pattern/Color: Waterfall/Khaki.
Pattern/Color: As selected from manufacturer's standard product
line.
b.
"GageCarve": Sculpted metal surface panels of aluminum, thickness as
per pattern, anodized finish. Panel assembly to be Class B or better fire
rated as per ASTM E 84.
1)
Pattern/Color: Horizon/Nickel Metallic.
2)
Pattern/Color: Linear/Nickel.
3)
Pattern/Color: Miami/Black Metallic.
4)
Pattern/Color: Miami/Nickel.
5)
Pattern/Color: Museum/Champagne.
6)
Pattern/Color: Organic/Champagne.
7)
Pattern/Color: Organic/Nickel.
8)
Pattern/Color: Plateau/Bronze Gold.
9)
Pattern/Color: Pyramid/Bronze Gold.
10) Pattern/Color: Pyramid/Warm Stainless Steel.
11) Pattern/Color: Reflections/Bronze.
12) Pattern/Color: Ribbon/Brass.
13) Pattern/Color: Ribbon/Nickel.
14) Pattern/Color: Rough Cut II/Nickel.
15) Pattern/Color: Waves/Nickel.
16) Pattern/Color: As selected from manufacturer's standard product
line.
c.
Layer: Aluminum face on Layer 2.
d.
Layer: Aluminum face on Layer 3.
e.
Layer: Aluminum face on Layer 4.
f.
Layer: Aluminum face on Layer 5.
g.
Layer: Aluminum face on Layer 6.
Cast Metal Face:
a.
"GageCast": Textured surface panels of metal particles throughout the
casting, thickness as per pattern, high luster finish. Panel assembly to
be Class B or better fire rated as per ASTM E 84.
1)
Pattern/Color: Alpine/NS/NS.
2)
Pattern/Color: Bamboo/BZ.
3)
Pattern/Color: Brush Stroke/BZ/BP.
4)
Pattern/Color: Connection BZ/BZ.
5)
Pattern/Color: Ellipse SS/SS.
6)
Pattern/Color: Herringbone/BZ.
7)
Pattern/Color: Industrial Weave/AL/BLK.
8)
Pattern/Color: Organic Linear/BZ.
9)
Pattern/Color: Raimondi/BZ.
10) Pattern/Color: Sahara/AL/NS.
11) Pattern/Color: Shanghai/BZ/BZ.
12) Pattern/Color: Traction/NS/BLK.
13) Pattern/Color: Vertical/AL/AL.
14) Pattern/Color: Wall Street/NS/AL.
14 27 00-7
15)
16)
5.
6.
7.
Pattern/Color: Willow/AL/BZ.
Pattern/Color: As selected from manufacturer's standard product
line.
b.
Layer: Cast metal face on Layer 2.
c.
Layer: Cast metal face on Layer 3.
d.
Layer: Cast metal face on Layer 4.
e.
Layer: Cast metal face on Layer 5.
f.
Layer: Cast metal face on Layer 6.
Bronze Face: Smooth surface panels of bronze, 0.040 inch (1.01 mm)
thickness, No. 4 satin finish. Panel assembly to be Class B or better fire rated
as per ASTM E 84.
a.
Layer: Bronze face on Layer 2.
b.
Layer: Bronze face on Layer 3.
c.
Layer: Bronze face on Layer 4.
d.
Layer: Bronze face on Layer 5.
e.
Layer: Bronze face on Layer 6.
Mirror Face: Clear safety mirror, 1/4 inch (6 mm) thickness, ANSI stamped.
Panel assembly to be Class B or better fire rated as per ASTM E 84.
a.
Layer: Mirror face on Layer 2.
b.
Layer: Mirror face on Layer 3.
c.
Layer: Mirror face on Layer 4.
d.
Layer: Mirror face on Layer 5.
e.
Layer: Mirror face on Layer 6.
Real Wood Veneer Face: Smooth surface panels of wood veneer on paper
backing, satin finish. Panel assembly to be Class B or better fire rated as per
ASTM E 84.
a.
Species and Cut: Afromosia, RT QC.
b.
Species and Cut: Anigre, FIG QC.
c.
Species and Cut: Ash, Japanese QC.
d.
Species and Cut: Ash, Tamo Burl.
e.
Species and Cut: Aspen, Burl.
f.
Species and Cut: Bamboo, Narrow.
g.
Species and Cut: Birch, Red FC.
h.
Species and Cut: Birch, White FC.
i.
Species and Cut: Cedar, Western Red QC.
j.
Species and Cut: Cherry, American FC.
k.
Species and Cut: Cherry, American QC.
l.
Species and Cut: Cherry, Striawood.
m.
Species and Cut: Ebony, FT QC.
n.
Species and Cut: Lacewood, QC.
o.
Species and Cut: Mahogany, African FC.
p.
Species and Cut: Maple, Birdseye RC.
q.
Species and Cut: Maple, QC.
r.
Species and Cut: Oak, Red FC.
s.
Species and Cut: Oak, Red RC.
t.
Species and Cut: Paldao, Figured QC.
u.
Species and Cut: Rosewood, Andes FC.
v.
Species and Cut: Rosewood, E. Indian QC.
w.
Species and Cut: Sapele, Pommele.
x.
Species and Cut: Sapele, QC.
y.
Species and Cut: Sycamore, English Figured QC.
z.
Species and Cut: Teak, QC.
aa.
Species and Cut: Walnut, Burl.
bb.
Species and Cut: Walnut, QC.
cc.
Species and Cut: Wenge, QC.
dd.
Species and Cut: Zebrawood, FT QC.
14 27 00-8
ee.
8.
Species and Cut: As selected from manufacturer's standard product
line.
ff.
Layer: Real wood veneer face on Layer 2.
gg.
Layer: Real wood veneer face on Layer 3.
hh.
Layer: Real wood veneer face on Layer 4.
ii.
Layer: Real wood veneer face on Layer 5.
jj.
Layer: Real wood veneer face on Layer 6.
Stone Veneer Face: Stone veneer panels, 1/8 inch (3 mm) thick, on 1/4 inch
(6 mm) thick aluminum honeycomb backer. Panel assembly to be Class B or
better fire rated as per ASTM E 84. Polished finish.
a.
Stone Type: Absolute Black.
b.
Stone Type: Alaska White.
c.
Stone Type: Azul Aran.
d.
Stone Type: Ballard.
e.
Stone Type: Bianco Gamma.
f.
Stone Type: Black Widow.
g.
Stone Type: Blue Pearl.
h.
Stone Type: Botticino Fiorito.
i.
Stone Type: Breccia Onicate.
j.
Stone Type: Circa.
k.
Stone Type: Crema Marfil.
l.
Stone Type: Eden.
m.
Stone Type: Emperador Dark.
n.
Stone Type: Emperador Light.
o.
Stone Type: Fantasy Brown.
p.
Stone Type: Giallo Napolene.
q.
Stone Type: Giallo Ornamental.
r.
Stone Type: Golden Fantasy.
s.
Stone Type: Marron Glace.
t.
Stone Type: Nero Marinace.
u.
Stone Type: Palladium.
v.
Stone Type: Purple Dunes.
w.
Stone Type: Raven.
x.
Stone Type: Red Malibu.
y.
Stone Type: River Jade.
z.
Stone Type: St. Hubert.
aa.
Stone Type: St. Jaume Rojo.
bb.
Stone Type: Steel Grey.
cc.
Stone Type: Vogue.
dd.
Stone Type: White Carrera.
ee.
Layer: Stone veneer face on Layer 2.
ff.
Layer: Stone veneer face on Layer 3.
gg.
Layer: Stone veneer face on Layer 4.
hh.
Layer: Stone veneer face on Layer 5.
ii.
Layer: Stone veneer face on Layer 6.
F.
Toe Kick and Toe Kick Binder with Concealed Ventilation Gap for Interlocking
Panels:
1.
Satin No. 4 finish 20 gauge stainless steel toe kick with anodized mill finish
aluminum binder (standard).
2.
Black powder coat finish 20 gauge stainless steel toe kick with black powder
coat finish aluminum binder.
3.
Satin No. 4 finish 0.04 inch (1.01 mm) thick bronze toe kick with anodized mill
finish aluminum binder with Satin No. 4 bronze cover.
G.
Top Cap:
14 27 00-9
1.
2.
3.
Anodized mill finish aluminum top cap with integrated pad hook channel
(standard).
Black powder coat finish aluminum top cap with integrated pad hook channel.
Black powder coat finish aluminum top cap with integrated pad hook channel
and 0.04 inch (1.01 mm) thick bronze flat insert.
H.
Corner and Flat Reveals:
1.
Stainless steel, 20 gauge, No. 4 satin finish (standard).
2.
Black powder coat finish. 20 gauge stainless steel.
3.
Satin bronze. 0.04 inch (1.01 mm) thick, No. 4 finish.
I.
Panel Binders: Standard at exposed panel edges near door jambs.
1.
Anodized mill finish aluminum (standard).
2.
Black powder coat finish aluminum.
3.
Bronze 0.04 inch (1.01 mm) thick, satin No. 4 finish.
J.
Inlay:
1.
Black powder coat finish aluminum inlay set into 1/8 inch (3 mm) shadow
lines.
2.
Anodized mill finish aluminum inlay set into 1/8 inch (3 mm) shadow lines.
3.
Satin Stainless inlay set into 1/8 inch (3 mm) shadow lines.
K.
Handrails: Pre-installed on wall panel to measure 32 inches (831 mm) above
finished floor unless indicated otherwise.
1.
Location: Back wall only.
2.
Location: Side walls only.
3.
Location: Back and side walls.
4.
Type: Vault style handrail with straight (not returned) ends.
a.
Size: 1-1/2 inch (38 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
5.
Type: Angle style handrail with straight (not returned) ends.
a.
Size: 1-1/2 inch (38 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
6.
Type: Fluid style handrail with straight (not returned) ends.
a.
Size: 1-1/2 inch (38 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
7.
Type: Round handrail with returned ends.
a.
Size: 1-1/2 inches (38 mm) diameter.
b.
Size: 2 inches (50 mm) diameter.
c.
Material and Finish: Satin stainless steel with No. 4 finish.
d.
Material and Finish: Mirror stainless steel with No. 8 finish.
e.
Material and Finish: Satin bronze with No. 4 finish.
f.
Material and Finish: Mirror bronze with No. 8 finish.
8.
Type: Oval handrail with returned ends.
a.
Size: 1.9 inches (48 mm) high by 1 inch (25 mm) wide.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
14 27 00-10
9.
10.
11.
12.
L.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
Type: Flat bar with returned ends, 3/8 inches (9.5 mm) thick.
a.
Width: 1-1/2 inches (38 mm).
b.
Width: 2 inches (50 mm).
c.
Width: 4 inches (101 mm).
d.
Material and Finish: Satin stainless steel with No. 4 finish.
e.
Material and Finish: Mirror stainless steel with No. 8 finish.
f.
Material and Finish: Satin bronze with No. 4 finish.
g.
Material and Finish: Mirror bronze with No. 8 finish.
Type: Flat bar with returned ends, 1/4 inch (6 mm) thick.
a.
Width: 6 inches (152 mm).
b.
Width: 8 inches (203 mm).
c.
Material and Finish: Satin stainless steel with No. 4 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
Type: Square style handrail with straight (not returned) ends.
a.
Size: 1-1/2 inch (38 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
Type: Rectangle style handrail with straight (not returned) ends.
a.
Size: 2 inch (50 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
Bumpers: Pre-installed on wall panel to measure 12 inches (305 mm) above finished
floor unless indicated otherwise.
1.
Location: Back wall only.
2.
Location: Side walls only.
3.
Location: Back and side walls.
4.
Type: Vault style handrail with straight (not returned) ends.
a.
Size: 1-1/2 inch (38 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
5.
Type: Angle style handrail with straight (not returned) ends.
a.
Size: 1-1/2 inch (38 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
6.
Type: Fluid style handrail with straight (not returned) ends.
a.
Size: 1-1/2 inch (38 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
7.
Type: Round handrail with returned ends.
a.
Size: 1-1/2 inches (38 mm) diameter.
b.
Size: 2 inches (50 mm) diameter.
c.
Material and Finish: Satin stainless steel with No. 4 finish.
d.
Material and Finish: Mirror stainless steel with No. 8 finish.
14 27 00-11
8.
9.
10.
11.
12.
e.
Material and Finish: Satin bronze with No. 4 finish.
f.
Material and Finish: Mirror bronze with No. 8 finish.
Type: Oval handrail with returned ends.
a.
Size: 1.9 inches (48 mm) high by 1 inch (25 mm) wide.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
Type: Flat bar with returned ends, 3/8 inches (9.5 mm) thick.
a.
Width: 1-1/2 inches (38 mm).
b.
Width: 2 inches (50 mm).
c.
Width: 4 inches (101 mm).
d.
Material and Finish: Satin stainless steel with No. 4 finish.
e.
Material and Finish: Mirror stainless steel with No. 8 finish.
f.
Material and Finish: Satin bronze with No. 4 finish.
g.
Material and Finish: Mirror bronze with No. 8 finish.
Type: Flat bar with returned ends, 1/4 inch (6 mm) thick.
a.
Width: 6 inches (152 mm).
b.
Width: 8 inches (203 mm).
c.
Material and Finish: Satin stainless steel with No. 4 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
Type: Square style handrail with straight (not returned) ends.
a.
Size: 1-1/2 inch (38 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
Type: Rectangle style handrail with straight (not returned) ends.
a.
Size: 2 inch (50 mm) diameter.
b.
Material and Finish: Satin stainless steel with No. 4 finish.
c.
Material and Finish: Mirror stainless steel with No. 8 finish.
d.
Material and Finish: Satin bronze with No. 4 finish.
e.
Material and Finish: Mirror bronze with No. 8 finish.
M.
Protective Pads: Vinyl protective pads for cab walls.
1.
Type: Pads with pre-attached pad hooks that lock into integrated pad hook
channel in the top cap, eliminating the need for pad buttons.
2.
Type: Pads with grommets for use with conventional pad buttons.
3.
Quantity: Set of 1.
4.
Quantity: Set of 2.
5.
Color: Grey.
6.
Color: As selected from manufacturer's standard product line.
N.
Pad Buttons: Pre-installed on wall panels.
1.
Type: Round end satin stainless steel with No. 4 finish.
2.
Type: Round end satin bronze with No. 4 finish.
O.
Suspended Ceiling:
1.
Aurora Ceiling:
a.
Type: Ceiling with concealed heavy-duty brushed 1.5 inch (38 mm) T
aluminum frame, with adjustable mounting legs, with a removable
panel for access to the escape hatch. Ceiling Class B or better fire
rated as per ASTM E 84 and LEED compliant.
b.
Facing: Stainless steel with No. 4 satin finish.
c.
Facing: Stainless steel with No. 8 mirror finish.
d.
Facing: Bronze with No. 4 satin finish.
14 27 00-12
2.
3.
4.
5.
e.
Facing: Bronze with No. 8 mirror finish.
f.
Facing: Brushed aluminum plastic laminate.
g.
Facing: Bronze tone aluminum plastic laminate.
h.
Facing: Selected from laminate manufacturer's standard product line.
Island Ceiling:
a.
Type: Ceiling with concealed heavy-duty brushed 1.5 inch (38 mm) T
aluminum frame, with adjustable mounting legs and divided into six
sections, nine for larger cars, with a removable panel for access to the
escape hatch. Ceiling Class B or better fire rated as per ASTM E 84
and LEED compliant.
b.
Facing: Stainless steel with No. 4 satin finish.
c.
Facing: Stainless steel with No. 8 mirror finish.
d.
Facing: Bronze with No. 4 satin finish.
e.
Facing: Bronze with No. 8 mirror finish.
f.
Facing: Brushed aluminum plastic laminate.
g.
Facing: Bronze tone aluminum plastic laminate.
h.
Facing: Selected from laminate manufacturer's standard product line.
Modular Ceiling:
a.
Type: Ceiling with heavy-duty 1.5 inch (38 mm) T aluminum frame, with
adjustable mounting legs and is divided into six sections, nine for larger
cars, with a removable panel for access to the escape hatch. Ceiling
Class B or better fire rated as per ASTM E 84 and LEED compliant.
1)
Aluminum Frame Finish: Brushed clear (standard).
2)
Aluminum Frame Finish: Black powder coat.
3)
Aluminum Frame Finish: Bronze powder coat.
4)
Facing for Drop-in Panels: Glossy black plastic laminate.
5)
Facing for Drop-in Panels: Glossy white plastic laminate.
6)
Facing for Drop-in Panels: Brushed aluminum laminate.
7)
Facing for Drop-in Panels: Selected from laminate
manufacturer's standard product line.
8)
Facing for Drop-in Panels: Selected from Trespa's standard
product line.
Venture Ceiling:
a.
Type: Ceiling with heavy-duty 1.5 inch (38 mm) T aluminum frame, with
adjustable mounting legs and is divided into three sections, four or five
for larger cars, with a removable panel for access to the escape hatch.
Ceiling Class B or better fire rated as per ASTM E 84 and LEED
compliant.
1)
Aluminum Frame Finish: Brushed clear (standard).
2)
Aluminum Frame Finish: Black powder coat.
3)
Aluminum Frame Finish: Bronze powder coat.
4)
Facing for Drop-in Panels: Glossy black plastic laminate.
5)
Facing for Drop-in Panels: Glossy white plastic laminate.
6)
Facing for Drop-in Panels: Brushed aluminum laminate.
7)
Facing for Drop-in Panels: Selected from laminate
manufacturer's standard product line.
8)
Facing for Drop-in Panels: Selected from Trespa's standard
product line.
Frame Ceiling:
a.
Type: Ceiling with heavy-duty 1.5 inch (38 mm) T aluminum frame, with
adjustable mounting legs and divided into six sections, nine for larger
cars, with diffusers and removable section for access to the escape
hatch. Ceiling Class B or better fire rated as per ASTM E 84 and LEED
compliant.
1)
Aluminum Frame Finish: Brushed clear (standard).
2)
Aluminum Frame Finish: Black powder coat.
14 27 00-13
6.
3)
Aluminum Frame Finish: Bronze powder coat.
4)
Light Diffusers: Translucent twin wall polycarbonate.
5)
Light Diffusers: Aluminum eggcrate.
Economy Ceiling:
a.
Type: Ceiling with heavy-duty brushed 1.5 inch (38 mm) T aluminum
non-welded frame, with some assembly required, with adjustable
mounting legs and is divided into three sections, four or five for larger
cars, with twin wall polycarbonate translucent light diffusers, and
removable section for access to the escape hatch. Ceiling Class B or
better fire rated as per ASTM E 84 and LEED compliant.
P.
Ceiling Lights:
1.
Fluorescent T-8 Fixtures Mounted on Cab Canopy: Two double-tube
fluorescent light fixtures with ballasts; 4 fixtures required for cars 4000 lbs.
and larger. Side mounted with 20 feet (6 m) of metal clad No. 12 wire with two
40 watt fluorescent T8 bulbs per fixture; 120 AC volt system.
2.
LED T-8 fixtures Mounted on Cab Canopy: Two double-tube LED light
fixtures; 4 fixtures required for cars 4000 lb. and larger. Side mounted, with 20
feet (6 m) metal clad No. 12 wire, with two LED 18 watt bulbs per fixture; 120
AC volt system.
3.
LED Standard Fixtures Mounted on Suspended Ceiling: Standard LED
downlights, low energy, low voltage, warm white (3000 Kelvin), 4 watt bulbs,
127 degree beam spread, up to 50,000 hours of life,; integrated tamperproof
metal trim ring. Pre-installed dimmer control included.
a.
Emergency light battery backup.
4.
Perimeter Lighting: LED perimeter fixtures, mounted on perimeter of ceiling;
120 AC volt system.
Q.
Trash Guards: Fire rated twin wall polycarbonate translucent light diffuser pieces
attached, slightly recessed vertically above ceiling perimeter to deter passengers
from depositing their trash above the ceiling.
PART 3 EXECUTION
3.1
3.2
PREPARATION
A.
Prepare surfaces using the methods recommended by the manufacturer in printed
installation instructions for achieving the best result for the substrate under the
project conditions.
B.
Protect elevator finishes, fixtures and equipment from damage.
INSTALLATION
A.
3.3
Install in accordance with manufacturer's instructions. Install in proper relationship to
adjacent materials.
1.
Do not make structural changes to elevator cab.
2.
Do not install work in a manner that interferes with the safe operation of the
elevator.
CLEANING AND PROTECTION
A.
Clean exposed surface in accordance with manufacturer's instructions.
B.
Protect exposed surfaces from damage by subsequent construction.
END OF SECTION
14 27 00-14