Recycling Data Reveals Significant
Improvements in University
Recycling
June 2012
“Trios” of trash and recycling bins can be found standing together all over the River Campus and in parts of the
Medical Center. Thanks to the campus recycling coordinator, Amy Kadrie, these waste stations have been
placed in more frequent and convenient locations in recent years to increase the ease of recycling. Framed
guides above the bins help students, staff, and visitors know how to sort their waste; and campus events such
as RecycleMania help spread awareness about recycling and waste reduction. Even the outdoor recycling
program has expanded with receptacles placed around the River and Medical Center campuses. However, this
is only the beginning of the extensive recycling program at the University.
Behind the scenes, numerous other materials are collected and recycled besides the typical containers and
paper products. So, what’s the goal of all these initiatives? It’s to increase the rate of recycling and reduce the
amount of garbage produced by the entire University community in order to decrease our impact on the
environment. And thanks to the efforts of a lot of different people, we know it is working.
Throughout the year, recycling data is compiled from various sources within the University. The weight of all
materials that are either sent to the landfill, recycled, or reused from each University facility, including the River
Campus, the Medical Center, the Memorial Art Gallery, the Eastman School of Music, and off-site locations, are
collected per quarter. This data doesn’t end with the trash and recycling collected by the waste stations; in fact
that’s only a small piece of it. Over 36 different materials are tracked, including electronics, cooking
grease, compostable material, mattresses, used carpet, wood pallets, yard waste, clothing, sharps
containers, x-ray films, and hazardous waste. Even the weights of batteries and ink cartridges, like the
ones dropped off at the IT Center of Rush Rhees Library, and the sneakers put in the Nike Reuse-AShoe recycling bins in the gym locker rooms are recorded as well.
Keeping track of all this information is no easy feat. Two summers ago student recycling assistant, Joseph
Griggs, created an extensive tracking system to hold all the data and calculate the various waste and recycling
totals per campus. From this database, charts and detailed graphs depicting waste to recycling ratios, material
portion percentages, and comparisons over time are created. Until recently, producing these graphs from the
enormous amount of data every few months was a tedious process. But with the help of student recycling
assistant, Jenna Lamb, an intricate spreadsheet will now automatically produce graphs each quarter for the
next 10 years. These are a few recent graphs which demonstrate significant improvements in the University’s
recycling system:
1.
University of Rochester Proportional Change in Total Waste 2005-2011
The above graph reveals the increase in recycled materials relative to the amount of trash produced by the
University from 2005 through the end of 2011. There has been a steady increase in the recycling rate as
compared to trash.
2. University of Rochester Proportional Change in Total Waste 2005-2011
(Without Construction)
Much of the recycling increase in recent years is actually a result of construction projects. Concrete, metal,
cardboard, plastic, and wood make up the majority of the materials that are recycled from construction sites.
One of the major projects that affected the recycling rate for 2011 was the new Saunders Research
Building, which began construction in 2009 and is now LEED certified! The renovations Danforth
Dining also contributed. In fact, 75% of the waste materials from renovating Danforth were diverted back into
to the manufacturing process.
It is exciting that so much construction waste can be recycled, but even without those projects, the data shows
that our overall recycling to waste ratio is still improving. This graph, is the same graph as the previous one but
excluding the data from construction projects, and still shows a significant increase since 2005.
3.
University of Rochester Total Recycling 2011 Materials
Ever wondered what materials we recycle the most of?
This pie graph represents the percent by weight of each material that the entire university recycled in 2011
(excluding construction projects which made accounted for 47% of the total tonnage recycled). As you can see,
paper products (paper, cardboard, and confidential documents) account for over half of the recycled material.
Each ton of paper we recycle saves 17 trees, 3 cubic yards of landfill space, 2 barrels of oil, 7,000 gallons of
water and 4,100 kilowatt hours of electricity. (EPA, 2008) The plastic, metal, and glass category makes up for
the second most recycled material. This is what is collected from the green-topped recycling bins found all over
campus where people can dispose of their used containers.
4.
University Materials 2010 vs. 2011
Comparing data with the previous year is another way to
demonstrate our progress in recycling, as well as identify areas for improvement. This graph shows the weight
in tons of many materials during the year of 2010 (blue) and 2011 (red).
This all adds up to great environmental benefits. According to our EPA WasteWise 2011 Climate Profile, we
reduced over 9,000 metric tons of Co2 emissions, thanks to our recycling efforts. This is equivalent to taking
1,663 vehicles off the road and saving over 1 million gallons of gasoline!
As the University continues to strive to increase recycling and reduce solid waste, you can do your part by
making sure to recycle whenever possible. You can get your own copy of the poster that is framed above the
waste stations on campus at: www.rochester.edu/sustainability/recycling/. A lot more is recyclable than
you might think!
Source: http://www.rochester.edu/sustainability/gogreen/recycle/recycleImprovements.html