Curriculum Vitae
Instruments Engineer
Rashid P
Mob.: +971526363406
Email: rashi033@gmail.com
Career Objective
I am looking for a good position in the field of instruments and automation in a prestigious company
where previous skills and capabilities can be put to efficient use. I possess effective organizational skills
and the ability to supervise a team and develop the final output.
Summary of Skills

About 3 years of experience as an instrumentation and control systems engineer in detailed
maintenance, commissioning and development co-ordination of instruments and control systems in steel
plant and building management system.

Configuring and faults diagnosis of DCS, PLC, SCADA, RTU, Profibus Communication, Analyzers and
Control Loops.

Installation, calibration and loop checking of the field instruments ( Emerson Rosemount, ABB, Endress &
Hauser, Bently Nevada, Honeywell, Yokogawa, Vega, Polysonics,.......)

Maintenance and calibration of the control valves (Pneumatic, Part turn, MOV, NRV,.....)

Experienced in flow meters configuring (electromagnetic, orifice plate, ultrasonic, turbine, variable area )
of ABB, Rosemount,

Designing, Implementing and Commissioning of new control loops as per site requirements.

Review of control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart

Familiar with engineering standards ISA, IEEE, ASTM, NAMUR, ASMI , ANSI , NEMA , IEC

Preparing master data sheet for PM schedule; ensuring safe and efficient performing of CM

Technical Support for the instrumentation team.

Experienced in the field instruments and control systems procurement activities

Spares balance investigation and inventory control for all instruments’ spare parts

Excellent communication interpersonal skills.
Educational Qualifications
2009........ Bachelor of Applied electronics & Instrumentation Engineering, Calicut university......... India
2004........Higher secondary in science Board of Higher secondary Examination Kerala ...............India
Organizational Experience
Organization:
SK ENGINEERS(UNDER LARSON &TOUBRO)
Duration:
Aug 2010 to Aug 2011
Designation:
Site Engineer
Project Description: I BLAST FURNACE,TATA STEEL JAMSHEDPUR
Responsibilities:
 Leading a team of four instrument technicians, fabricators..

Planning required up gradation for instruments to achieve production quality and cost minimizing.

Erection and calibration of pneumatic control valves (Weir, Flowserv, Blackborough,.....) and part turn
actuated valves (Bray, Airtorque,Flowtek,..... )

Erection and calibration of different analyzers : Conductivity, Chlorine, PH, SDI, Redox, Turbidity, TDS (
Endress and Hauser ) and IMA/FL200 Oil in water

Erection and calibration of flow meters ( electromagnetic, orifice plate, variable area, turbine,
ultrasonic..... ) of ABB, Krohne, Rosemount, +GF+, Polysonics

Erection and calibration of transmitters PT, LT, TT, DPT (Emerson Rosemount, Endress & Hauser, ABB ,.....)
and Monitran vibration transducers.

Ensure Spares balance and inventory control for all instruments’ spare parts
Organization:
Siegend Systems and Engineers Cochin – India
Duration:
Aug 2011 to AUG 2013
Designation:
Assistant Project Engineer
Project Description: Building Management System
Responsibilities:
 Daily site visit and close monitoring the construction activities on site.
 Follow up with consultants & client (End Users) for Site Inspections.
 Responsible & proficient in all Electrical HV & LV system installation & Commissioning.
 Responsible & proficient in installation of all ELV systems ( CCTV,ACS, Lighting Management
System, Fire Alarm, Audio Visual , Public address & BMS systems).
 Represent Electrical Engineering Department at Internal (Monthly/Weekly/Sub-contractors)
meetings, Technical / Project - kick off meetings.
 Estimating / Selection of material Type/Make/Manuf./Size with the Bill of Quantity, Scope of work,
Approved for construction drawings.
 Coordinating with local governing Authority, “Government Engineers” and “Inspectors”, for final
Inspection.
 Interaction with manufacturers & suppliers for the availability / negotiating price of the materials
and delivery of materials as per the correct specification / standards and requirement of the client
on time.
 Store visit for arrival of new materials and inspect the material upon receiving.

Estimating / Selection of material Type/Make/Manuf./Size with the Bill of Quantity, Scope of work,
Approved for construction drawings.
Training

Experion DCS, SCADA, PLC. conducted by JRD TATA Automation training centre HONEYWELL Automation
India Ltd. Pune

A course in Piping designing & Drafting at Teck-Path finishing school Alway. Cohin

Completed training program on DCS,PLC&SCADA in RASHTRIYA CHEMICALS FERTILISERS LTD,MUMBAI
from 01/02/2009 to05/02/2009
IT Skills







Operating systems
: Windows XP, 7,NT, 2008 Server
Programs
: Office Tools , AutoCAD
Internet
: Very good
Programming languages : Visual Basic, C++
PLC Programming
: Ladder Diagram
PC Networking
: Very good
PC HW maintenance
: Experienced
Languages
English:
Fluent; read, write and speak
Hindi:
Read, write and speak
Malayalam: Mother tongue
Personal Profile
 DOB
 Mother Tongue
 Languages Known
 Marital Status
 Gender
 Nationality
 Permanent Address

Passport Number
: 28 May 1987.
: Malayalam
: English, Hindi
: Single
: Male
: Indian
: Safa manzil.kallur
Keechery- P.O, Mattanur, Kannur - dts,
Kerala, India - 670702.
: KO519306
___________________________________________________________________________________________________
Declaration
I hereby declare that all information stated above is true to the best of my knowledge.
Place : Dubai
Date : 22/4/14
Rashid.P