AP Exam Tips for Students

advertisement
AP Statistics Exam Tips for Students
The following exam tips were written by Sanderson Smith, retired, and Daren Starnes of The Lawrenceville
School, Lawrenceville, New Jersey, and are used with permission.
The Exam Itself
To maximize your score on the AP Statistics Exam, you first need to know how the exam is organized and how it
will be scored.
The AP Statistics Exam consists of two separate sections:
Section I 40 Multiple-Choice 90
counts 50 percent of
questions
minutes exam score
SCORING:
1 point for each correct answer
0 points for each question left blank
Section II FreeResponse
questions
90
counts
minutes 50
percent
of exam
score
Questions are
designed to test your
statistical reasoning
and your
communication skills.
SCORING:
Five open-ended problems @ 13 minutes; each counts 15 percent of free-response score
One investigative task @ 25 minutes; counts 25 percent of free-response score
Each free-response question is scored on a 0 to 4 scale. General descriptors for each of the scores are:
Complete
NO statistical errors and clear
4
Response
communication
3
Substantial
Response
Minor statistical error/omission or fuzzy
communication
2
Developing
Response
Important statistical error/omission or lousy
communication
1
Minimal
Response
A "glimmer" of statistical knowledge related
to the problem
0
Inadequate
Response
No glimmer; statistically dangerous to
himself and others
Your work is graded holistically, meaning that your entire response to a problem is considered before a score is
assigned.
Exam preparation begins on the first day of your AP Statistics class. Keep in mind the following advice
throughout the year:



Read your statistics book. Most AP Exam questions start with a paragraph that describes the context of the
problem. You need to be able to pick out important statistical cues. The only way you will learn to do that is
through hands-on experience.
Practice writing about your statistical thinking. Your success on the AP Exam depends on how well you
explain your reasoning.
Work as many problems as you can in the weeks leading up to the exam. Your biggest challenge will be
determining what statistical technique to use on each question.
On the night before the exam


Get a good night's sleep.
Make sure your calculator is functioning properly. Insert new batteries, and make sure all systems are "go."
Bring a spare calculator if possible.
During the Exam
General Advice
Relax, and take time to think! Remember that everyone else taking the exam is in a situation identical to yours.
Realize that the problems will probably look considerably more complicated than those you have encountered in
other math courses. That's because a statistics course is, necessarily, a "wordy" course.
Read each question carefully before you begin working. This is especially important for problems with
multiple parts or lengthy introductions. Suggestion: Underline key words and phrases as you read the questions.
Look at graphs and displays carefully. For graphs, note carefully what is represented on the axes, and be
aware of number scale. Some questions that provide tables of numbers and graphs relating to the numbers can
be answered simply by "reading" the graphs.
About graphing calculator use: Your graphing calculator is meant to be a tool, to be used sparingly on some
exam questions. Your brain is meant to be your primary tool.
On multiple-choice questions:




Examine the question carefully. What statistical topic is being tested? What is the purpose of the question?
Read carefully. Underline key words and phrases. After deciding on an answer, glance at the underlined
words and phrases to make sure you haven't made a careless mistake or an incorrect assumption.
You don't have to answer all of the questions to get a good overall score.
If an answer choice seems "obvious," think about it. If it's so obvious to you, it's probably obvious to others,
and chances are good that it is not the correct response. For example, suppose one set of test scores has a
mean of 80, and another set of scores on the same test has a mean of 90. If the two sets are combined, what
is the mean of the combined scores. The "obvious" answer is 85 (and will certainly appear among the answer
choices), but you, as an intelligent statistics student, realize that 85 is not necessarily the correct response.
On free-response questions:





Do not feel pressured to work the free-response problems in a linear fashion, for example, 1, 2, 3, 4, 5, 6.
Read all of the problems before you begin. Question 1 is meant to be straightforward, so you may want to
start with it. Then move to another problem that you feel confident about. Whatever you do, don't run out of
time before you get to Question 6. This Investigative Task counts almost twice as much as any other
question.
Read each question carefully, sentence by sentence, and underline key words or phrases.
Decide what statistical concept/idea is being tested. This will help you choose a proper approach to solving
the problem.
You don't have to answer a free-response question in paragraph form. Sometimes an organized set of bullet
points or an algebraic process is preferable.
Answer each question in context.
Specific Advice on Free-Response Questions
On problems where you have to produce a graph:


Label and scale your axes! Do not copy a calculator screen verbatim onto the test.
Don't refer to a graph on your calculator that you haven't drawn. Transfer it to the exam paper. This is part of
your burden of good communication.
Communicate your thinking clearly.



Organize your thoughts before you write, just as you would for an English paper.
Write neatly.
Write efficiently. Say what needs to be said, and move on. Don't ramble.




The burden of communication is on you. Don't leave it to the reader to make inferences.
Don't contradict yourself.
Avoid bringing your personal ideas and philosophical insights into your response.
When you finish writing your answer, look back. Does the answer make sense? Did you address the context
of the problem?
About graphing calculator use:



Don't waste time punching numbers into your calculator unless you're sure it is necessary. Entering lists of
numbers into a calculator can be time-consuming, and certainly doesn't represent a display of statistical
intelligence.
Do not write directions for calculator button-pushing on the exam!
Avoid calculator syntax, such as normalcdf or 1-PropZTest.
Follow directions. If a problem asks you to "explain" or "justify," then be sure to do so.


Don't "cast a wide net" by writing down everything you know, because you will be graded on everything you
write. If part of your answer is wrong, you will be penalized.
Don't give parallel solutions. Decide on the best path for your answer, and follow it through to the logical
conclusion. Providing multiple solutions to a single question is generally not to your advantage. You will be
graded on the lesser of the two solutions. Put another way, if one of your solutions is correct and another is
incorrect, your response will be scored "incorrect."
The amount of space provided on the free-response questions does not necessarily indicate how much you
should write.
If you cannot get an answer to part of a question, make up a plausible answer to use in the remaining parts of
the problem.
Content-Specific Tips
I. Exploring Data
When you analyze one-variable data, always discuss shape, center, and spread.
Look for patterns in the data, and then for deviations from those patterns.
Don't confuse median and mean. They are both measures of center, but for a given data set, they may differ
by a considerable amount.
(a) If distribution is skewed right, then mean is greater than median.
(b) If distribution is skewed left, then mean is less than median.
Mean > median is not sufficient to show that a distribution is skewed right.
Mean < median is not sufficient to show that a distribution is skewed left. Don't confuse standard
deviation and variance. Remember that standard deviation units are the same as the data units, while
variance is measured in square units.
Know how transformations of a data set affect summary statistics.
(a) Adding (or subtracting) the same positive number k, to (from) each element in a data set increases
(decreases) the mean and median by k. The standard deviation and IQR do not change.
(b) Multiplying all numbers in a data set by a constant k multiplies the mean, median, IQR, and standard
deviation by k. For instance, if you multiply all members of a data set by four, then the new set has a
standard deviation that is four times larger than that of the original data set, but a variance that is 16
times the original variance.
Simple examples:
Original data set Mean St. Dev. Variance Median IQR Range
{1,2,3,4,5}
3
1.414
2
3
3
4
Add 7 to each element of the original data set:
New data set Mean St. Dev. Variance Median IQR Range
{8,9,10,11,12} 10
1.414
2
10
3
4
Multiply each element of the original data set by four:
New data set Mean St. Dev. Variance Median IQR Range
{4,8,12,16,20} 12
5.6569
31
12
12
16
Multiply elements of the original data set by four, then add seven:
New data set
Mean St. Dev. Variance Median IQR Range
{11,15,19,23,27} 19
5.6569
32
19
12
16
When commenting on shape:
 Symmetric is not the same as "equally" or "uniformly" distributed.
 Do not say that a distribution "is normal" just because it looks symmetric and unimodal.
Treat the word "normal" as a "four-letter word." You should only use it if you are really sure that it's
appropriate in the given situation.
When describing a scatterplot:
 Comment on the direction, shape, and strength of the relationship.
 Look for patterns in the data, and then for deviations from those patterns.
A correlation coefficient near 0 doesn't necessarily mean there are no meaningful relationships
between the two variables. Consider the following data points:
X
2
3
4
5
6
7
8
9
10
11
12
Y
6
30
8
50
10
70
12
90
14
110
16
In this case, r = .38, indicating fairly weak correlation, but a scatterplot displays something quite
interesting. Moral of the story: Always plot your data.
Don't confuse correlation coefficient and slope of least-squares regression line.
 A slope close to 1 or -1 doesn't mean strong correlation.
 An r value close to 1 or -1 doesn't mean the slope of the linear regression line is close to 1 or -1.
 The relationship between b (slope of regression line) and r (coefficient of correlation) is
This is on the formula sheet provided with the exam.
 Remember that r2 > 0 doesn't mean r > 0. For instance, if r2 = 0.81, then r = 0.9 or r = -0.9.
You should know difference between a scatter plot and a residual plot.
For a residual plot, be sure to comment on:
 The balance of positive and negative residuals
 The size of the residuals relative to the corresponding y-values
 Whether the residuals appear to be randomly distributed
Given a least squares regression line, you should be able to correctly interpret the slope and yintercept in the context of the problem.
Remember properties of the least-squares regression line:
 Contains the point
, where is the mean of the x-values and is the mean of the y-values.
 Minimizes the sum of the squared residuals (vertical deviations from the LSRL)
Residual = (actual y-value of data point) - (predicted y-value for that point from the LSRL)
Realize that logarithmic transformations can be practical and useful. Taking logs cuts down the
magnitude of numbers. Also, if there is an exponential relationship between x and y (y=abx), then a
scatterplot of the points {(x,log y)} has a linear pattern.
Example:
x
y
log y
1
24
1.3802
2
192
2.2833
3
1,536
3.1864
4
12,188
4.0859
7
6,290,000
6.7987
8
49,900,000
7.6981
An exponential fit to (x,y) on the TI-83 yields y = 3.002(7.993x), with r = 0.9999. When x = 9, this model
predicts y = 399,901,449.2.
A linear fit to (x,log y) on the TI-83 yields log y = 0.477395 + 0.9027286x, with r = .9999. If x = 9, then
log y = 0.477395 + 0.9027286(9) = 8.601952978. Hence y = 10 8.601952978 = 399,901,449.2.
If the relationship between x and y is described by a power function (y=axb), then a scatterplot of (log x,
log y) will have a linear pattern.
Example:
x
y
log x
log y
1
8
0
.90309
2
64
.30103
1.8062
3
216
.47712
2.3345
4
512
.60206
2.7093
7
2744
.8451
3.4384
8
4096
.90309
3.6124
A power fit to (x,y) on the TI-83 yields y=8x³ with r=1. When x=9, this model predicts y=8(9)³ =5832.
A linear fit to (log x, log y) on the TI-83 yields log y = .90309 + 3 log x with r = 1. When x = 9, this model
predicts log y = .90309 + 3 log(9) = 3.76582
Hence, y = 103.76582 = 5832.
II. Surveys, observational studies, and experiments
Know what is required for a sample to be a simple random sample (SRS). If each individual in the
population has an equal probability of being chosen for a sample, it doesn't follow that the sample is an
SRS. Consider a class of six boys and six girls. I want to randomly pick a committee of two students
from this group. I decide to flip a coin. If "heads," I will choose two girls by a random process. If "tails," I
will choose two boys by a random process. Now, each student has an equal probability (1/6) of being
chosen for the committee. However, the two students are not an SRS of size two picked from members
of the class. Why not? Because this selection process does not allow for a committee consisting of one
boy and one girl. To have an SRS of size two from the class, each group of two students would have to
have an equal probability of being chosen as the committee.
SRS refers to how you obtain your sample; random allocation is what you use in an experiment to
assign subjects to treatment groups. They are not synonyms.
Well-designed experiments satisfy the principles of control, randomization, and replication.
 Control for the effects of lurking variables by comparing several treatments in the same environment.
Note: Control is not synonymous with "control group."
 Randomization refers to the random allocation of subjects to treatment groups, and not to the selection
of subjects for the experiment. Randomization is an attempt to "even out" the effects of lurking
variables across the treatment groups. Randomization helps avoid bias.
 Replication means using a large enough number of subjects to reduce chance variation in a study.
Note: In science, replication often means, "do the experiment again."
Distinguish the language of surveys from the language of
experiments.
Stratifying:sampling::Blocking:experiment
It is not enough to memorize the terminology related to surveys, observational studies, and
experiments. You must be able to apply the terminology in context. For example:
Blocking refers to a deliberate grouping of subjects in an experiment based on a characteristic (such
as gender, cholesterol level, race, or age) that you suspect will affect responses to treatments in a
systematic way. After blocking, you should randomly assign subjects to treatments within the blocks.
Blocking reduces unwanted variability.
An experiment is double blind if neither the subjects nor the experimenters know who is receiving what
treatment. A third party can keep track of this information.
Suppose that subjects in an observational study who eat an apple a day get significantly fewer cavities
than subjects who eat less than one apple each week. A possible confounding variable is overall diet.
Members of the apple-a-day group may tend to eat fewer sweets, while those in the non-apple-eating
group may turn to sweets as a regular alternative. Since different diets could contribute to the disparity
in cavities between the two groups, we cannot say that eating an apple each day causes a reduction in
cavities.
III. Anticipating patterns: probability, simulations, and random variables
You need to be able to describe how you will perform a simulation in addition to actually doing it.
 Create a correspondence between random numbers and outcomes.
 Explain how you will obtain the random numbers (e.g., move across the rows of the random digits
table, examining pairs of digits), and how you will know when to stop.
 Make sure you understand the purpose of the simulation -- counting the number of trials until you
achieve "success" or counting the number of "successes" or some other criterion.
 Are you drawing numbers with or without replacement? Be sure to mention this in your description of
the simulation and to perform the simulation accordingly.
If you're not sure how to approach a probability problem on the AP Exam, see if you can design a
simulation to get an approximate answer.
Independent events are not the same as mutually exclusive (disjoint) events.
Two events, A and B, are independent if the occurrence or non-occurrence of one of the events has no
effect on the probability that the other event occurs.
Events A and B are mutually exclusive if they cannot happen simultaneously.
Example: Roll two fair six-sided dice. Let A = the sum of the numbers showing is 7,
B = the second die shows a 6, and C = the sum of the numbers showing is 3.
By making a table of the 36 possible outcomes of rolling two six-sided dice, you will find that P(A) = 1/6,
P(B) = 1/6, and P(C) = 2/36.
 Events A and B are independent. Suppose you are told that the sum of the numbers showing is 7.
Then the only possible outcomes are {(1,6), (2,5), (3,4), (4,3), (5,2), and (6,1)}. The probability that
event B occurs (second die shows a 6) is now 1/6. This new piece of information did not change the
likelihood that event B would happen. Let's reverse the situation. Suppose you were told that the
second die showed a 6. There are only six possible outcomes: {(1,6), (2,6), (3,6), (4,6), (5,6), and
(6,6)}. The probability that the sum is 7 remains 1/6. Knowing that event B occurred did not affect the
probability that event A occurs.
 Events A and B are not disjoint. Both can occur at the same time.
 Events B and C are mutually exclusive (disjoint). If the second die shows a 6, then the sum cannot be
3. Can you show that events B and C are not independent?
Recognize a discrete random variable setting when it arises. Be prepared to calculate its mean
(expected value) and standard deviation.
Example:
Let X = the number of heads obtained when five fair coins are tossed.
Value of x 0
1
2
3
4
5
Probability 1/32 = 5/32 = 10/32 = 10/32 = 5/32 = 1/32 =
0.03125 0.15625 0.3125 0.3125 0.15625 0.03125
Recognize a binomial situation when it arises.
The four requirements for a chance phenomenon to be a binomial situation are:
1.
2.
3.
4.
There are a fixed number of trials.
On each trial, there are two possible outcomes that can be labeled "success" and "failure."
The probability of a "success" on each trial is constant.
The trials are independent.
Example: Consider rolling a fair die 10 times. There are 10 trials. Rolling a 6 constitutes a
"success," while rolling any other number represents a "failure." The probability of obtaining a 6
on any roll is 1/6, and the outcomes of successive trials are independent.
Using the TI-83, the probability of getting exactly three sixes is ( 10C3)(1/6)3(5/6)7 or
binompdf(10,1/6,3) = 0.155045, or about 15.5 percent.
The probability of getting less than four sixes is binomcdf(10,1/6,3) = 0.93027, or about 93
percent. Hence, the probability of getting four or more sixes in 10 rolls of a single die is about 7
percent.
If X is the number of sixes obtained when 10 dice are rolled, then
If X is the number of 6's obtained when ten dice are rolled, then E(X) =
x
= 10(1/6) = 1.6667, and
Did you notice that the coin-tossing example above is also a binomial situation?
Realize that a binomial distribution can be approximated well by a normal distribution if the
number of trials is sufficiently large. If n is the number of trials in a binomial setting, and if p
represents the probability of "success" on each trial, then a good rule of thumb states that a normal
distribution can be used to approximate the binomial distribution if np is at least 10 and n(1-p) is at least
10.
The primary difference between a binomial random variable and a geometric random variable is
what you are counting. A binomial random variable counts the number of "successes" in n trials. A
geometric random variable counts the number of trials up to and including the first "success."
IV. Statistical Inference
You must be able to decide which statistical inference procedure is appropriate in a given setting.
Working lots of review problems will help you.
You need to know the difference between a population parameter, a sample statistic, and the sampling
distribution of a statistic.
On any hypothesis testing problem:
1.
2.
3.
4.
State hypotheses in words and symbols.
Identify the correct inference procedure and verify conditions for using it.
Calculate the test statistic and the P-value (or rejection region).
Draw a conclusion in context that is directly linked to your P-value or rejection region.
On any confidence interval problem:
1.
2.
3.
4.
Identify the population of interest and the parameter you want to draw conclusions about.
Choose the appropriate inference procedure and verify conditions for its use.
Carry out the inference procedure.
Interpret your results in the context of the problem.
You need to know the specific conditions required for the validity of each statistical inference procedure
-- confidence intervals and significance tests.
Be familiar with the concepts of Type I error, Type II error, and Power of a test.
Type II error: Accepting a null hypothesis when it is false.
Power of a test: Probability of correctly rejecting a null hypothesis
Power = 1 - P(Type II error).
You can increase the power of a test by increasing the sample size or increasing the significance level
(the probability of a Type I error).
See also...
 AP Statistics Course Home Page
 Exam Tips Index
Download