Honeywell HD262H 960H 700 TVL TDN Indoor IR Minidome Camera www.honeywell.com/security
Guide Specifications in CSI Format
800-18644 Rev A
SECTION 28 23 29
960H 700 TVL TRUE DAY/NIGHT INDOOR IR MINIDOME CAMERA
PART 1 GENERAL
1.1
SECTION INCLUDES
A.
Provide a 960H ultra-high resolution, 700 TVL, true day/night, indoor, IR minidome camera with varifocal manual iris lens for video surveillance, including design, supply, installation, and commissioning.
1.2
RELATED SECTIONS
NOTE TO SPECIFIER: Include related sections as appropriate if video surveillance system is integrated to other systems.
A.
Section 26 05 00 – Common Work Results for Electrical, for interface and coordination with building electrical systems and distribution.
B.
Section 28 05 13 – Conductors and Cables for Electronic Safety and Security, for cabling between system servers, panels, and remote devices.
C.
Section 28 05 28 – Pathways for Electronic Safety and Security, for conduit and raceway requirements.
D.
Section 28 23 23 – Video Surveillance Systems Infrastructure.
E.
Section 28 23 29 – Video Surveillance Remote Devices and Sensors.
1.3
REFERENCES
A.
Reference Standards: Provide systems that meet or exceed the requirements of the following publications and organizations as applicable to the work of this section:
1.
Canadian ICES-003
2.
Canadian Standards Association (CSA)
3.
Conformity for Europe (CE)
4.
Electronic Industry Association (EIA)
28 23 29-1

Honeywell HD262H 960H 700 TVL TDN Indoor IR Minidome Camera www.honeywell.com/security
5.
Federal Communications Commission (FCC)
6.
Joint Photographic Experts Group (JPEG)
7.
National Television Systems Committee (NTSC)
8.
Phase Alternating Line (PAL)
9.
Underwriters Laboratories Inc. (UL)
Guide Specifications in CSI Format
800-18644 Rev A
1.4
SYSTEM DESCRIPTION
A.
The Performance Series Plus true day/night, indoor IR minidome camera shall use an integrated indoor enclosure that can be mounted quickly to a flat surface and easily installed directly to a ceiling or wall.
B.
The indoor IR minidome camera shall have a 1/3" 1.3 MP CMOS imager to capture
700 TV lines of ultra-high resolution video. Twenty-four (24) integrated infrared
LEDs and a built-in, 2.8-12 mm varifocal manual iris lens with an ICR cut filter that automatically switches to provide day/night operation and covers a wide range of viewing angles. The camera accepts 12 V DC or 24 V AC power input.
1.5
SUBMITTALS
A.
General: Submittals shall be made in accordance with the Conditions of the
Contract and Submittal Procedure Section.
B.
Manufacturer’s Product Data: Submit manufacturer’s data sheets indicating systems and components proposed for use, including instruction manuals.
C.
Shop Drawings: Submit complete shop drawings, including connection diagrams for interfacing equipment, list of connected equipment, and locations for major equipment components.
D.
Record Drawings: During construction maintain record drawings indicating location of equipment and wiring. Submit an electronic version of record drawings not later than Substantial Completion of the project.
E.
Operation and Maintenance Data: Submit manufacturer’s operation and maintenance data, customized to the system installed. Include system and operator manuals.
F.
Field Tests: Submit results of field testing of every device, including date, testing personnel, retesting date (if applicable), and confirmation that every device passed field testing.
G.
Maintenance Service Agreement: Submit a sample copy of the manufacturer’s maintenance service agreement, including cost and services for a one year period for Owner’s review. Maintenance shall include, but not be limited to, labor and materials to repair the system, tests and adjustments, and regular inspections.
28 23 29-2

Honeywell HD262H 960H 700 TVL TDN Indoor IR Minidome Camera www.honeywell.com/security
Guide Specifications in CSI Format
800-18644 Rev A
1.6
QUALITY ASSURANCE
A.
Manufacturer: Minimum ten (10) years experience in manufacturing and maintaining video surveillance systems. Manufacturer shall provide toll-free technical assistance and support available 24/7.
B.
Manufacture Location: Provide equipment assembled in China.
C.
Installer: Minimum two (2) years experience installing similar systems, and acceptable to the manufacturer of the video surveillance system.
D.
Regulatory Requirements:
1.
Emissions: FCC, Part 15B, Class B
E.
Environmental Requirements:
1.
Operating Temperature: -
4°F to 140°F (−20°C to 60°C)
2.
Storage Temperature: −4°F to 149°F (−20°C to 65°C)
F.
Power Requirements: Input voltage shall be 12 V DC or 24 V AC
1.7
DELIVERY, STORAGE, AND HANDLING
A.
Deliver materials in manufacturer’s labeled packages. Store and handle in accordance with manufacturer’s requirements, in a facility with environmental conditions within recommended limits.
1.8
WARRANTY
A.
Manufacturer’s Warranty: Submit manufacturer’s warranty of three (3) years from the manufacture date code under normal use and service for the video surveillance system.
PART 2 PRODUCTS
2.1
MANUFACTURER
A.
Camera Manufacturer: Honeywell HD262H Performance Series true day/night 700
TVL indoor IR minidome camera, www.honeywell.com/security .
28 23 29-3

Honeywell HD262H 960H 700 TVL TDN Indoor IR Minidome Camera www.honeywell.com/security
Guide Specifications in CSI Format
800-18644 Rev A
B.
Accepted Part Numbers:
1.
HD262H – IR Minidome Camera, 1/3" 1.3 MP CMOS, 700 TVL, 2.8-12 mm
VFMI Lens, 12 V DC/24 V AC, NTSC
2.
HD262HX – IR Minidome Camera, 1/3" 1.3 MP CMOS, 700 TVL, 2.8-12 mm
VFMI Lens, 12 V DC/24 V AC, PAL
2.2
SYSTEM COMPONENTS
A.
Minidome camera and cabling.
2.3
OPERATIONAL REQUIREMENTS
A.
The Performance Series IR minidome camera system shall meet or exceed the following camera specifications:
1.
Image Sensor: 1/3-inch 1.3 MP CMOS
2.
Total Pixels: NTSC: 1280 (H)
× 960 (V)
3.
Horizontal Resolution: 700 TVL
4.
Lens Type: 2.8
–12 mm Varifocal manual iris lens, F1.4
5.
Angle of View: 80 ° wide 27.2° tele
6.
IR LEDs: 850 nm, 24 LEDs
7.
IR Illumination Distance: Up to 66 ft. (20 m), depending on scene reflectance
8.
Minimum Illumination: 0.14 lux @ F1.4 (AGC on); 0 lux (IR LEDs on)
9.
Shutter Speed: 1/30 – 1/30,000 seconds (NTSC)
1/25 – 1/25,000 seconds (PAL)
10.
Video Output: Composite, 1.0 V
P-P
, 75 ohms
11.
Signal-to-Noise Ratio: 62 dB or more (AGC off)
12.
Synchronization: Internal
B.
The indoor IR minidome camera shall provide true day/night functionality with IR illumination. When the ambient light drops below a defined threshold, the 24 IR
LEDs activate, the mechanical IR cut filter within the camera is removed from the optical path, and the camera changes automatically from color to black-and-white mode.
C.
The indoor IR minidome camera shall use smart infrared technology that allows auto
LED brightness adjustment to prevent excessive illumination.
28 23 29-4

Honeywell HD262H 960H 700 TVL TDN Indoor IR Minidome Camera www.honeywell.com/security
Guide Specifications in CSI Format
800-18644 Rev A
D.
The indoor IR minidome camera shall provide user-selectable 3D digital noise reduction options: Low, Middle, High, Off.
E.
The indoor IR minidome camera shall provide an on-screen display (OSD).
F.
The indoor IR minidome camera shall provide backlight compensation.
G.
The indoor IR minidome camera shall provide an electronic shutter and selectable automatic gain control (AGC) for operation in a wide range of lighting conditions.
H.
The indoor IR minidome camera shall provide auto white balance to constantly monitor the light and adjust the color as needed. User-selectable white balance options: Auto, Manual.
I.
The indoor IR minidome camera shall provide user-selectable Day/Night modes:
Color, BW, Smart IR.
J.
The indoor IR minidome camera shall provide digital wide dynamic range. User selectable: High, Middle, Low, Off.
K.
The indoor IR minidome camera shall provide fully configurable motion detection settings and four (4) motion detection areas.
L.
The indoor IR minidome camera shall provide privacy masking for up to eight (8) areas.
M.
The indoor IR minidome camera shall provide 12 V DC or 24 V AC operation.
N.
The indoor IR minidome camera housing shall consist of ABS plastic construction with a white finish and the camera bubble shall consist of polycarbonate material.
2.4
SYSTEM HARDWARE
A.
The indoor IR minidome camera shall have the following mechanical specifications:
1.
Unit Dimensions (W × H): 5. 2" × 4.0" (133.0 mm × 102.1 mm)
2.
Unit Weight: 0.9 lb (0.41 kg)
3.
Video Output: BNC connector (75 ohms)
4.
Power Input: screw terminal block
B.
The indoor IR minidome camera shall have the following electrical specifications:
1.
Voltage: 12 V DC, 24 V AC
2.
Input Range: 12 V DC ± 10% / 24 V AC ± 10%
3.
Power Consumption: 7 W maximum (IR LEDs on)
28 23 29-5

Honeywell HD262H 960H 700 TVL TDN Indoor IR Minidome Camera www.honeywell.com/security
Guide Specifications in CSI Format
800-18644 Rev A
C.
The indoor IR minidome camera shall be designed to meet the following environmental conditions:
1.
Operating Temperature: -4 °F to 140°F (−20°C to 60°C)
2.
Storage Temperature: −4°F to 149°F (−20°C to 65°C)
3.
Relative Humidity: 0 –90%, non-condensing
4.
Emissions: FCC, Part 15B, Class B
2.5
MANUFACTURER SUPPORT
A.
Manufacturer shall provide customer service, pre-sales applications assistance, after-sales technical assistance, access to online technical support, and online training using Web conferencing.
B.
Manufacturer shall provide 24/7 technical assistance and support by means of a tollfree telephone number at no extra charge.
PART 3 EXECUTION
3.1
EXAMINATION
A.
Examine site conditions prior to installation. Notify Architect and Owner in writing if unsuitable conditions are encountered. Do not start installation until site conditions are acceptable.
3.2
INSTALLATION
A.
All components of the camera system shall be thoroughly tested before shipping to the project location.
B.
Camera system shall be installed, programmed, and tested in accordance with manufacturer’s installation instructions.
1.
Coordinate interfaces with Owner’s representative where appropriate.
2.
Provide conduit, cable, and wire for complete and reliable installation. Obtain
Owner’s approval for exact location of the camera and all boxes, conduit, cable, and wiring runs prior to installation.
3.
Install conduit, cable, and wire parallel and square with building lines, including raised floors areas. Do not exceed 40 percent fill in conduits. Gather wires and tie to create an orderly installation.
28 23 29-6

Honeywell HD262H 960H 700 TVL TDN Indoor IR Minidome Camera www.honeywell.com/security
Guide Specifications in CSI Format
800-18644 Rev A
4.
Coordinate with other trades to provide proper sequencing of installation.
3.3
FIELD COMMISSIONING AND CERTIFICATION
A.
Field Commissioning: Test minidome camera system as recommended by manufacturer, including the following:
1.
Conduct complete inspection and testing of equipment, including verification of operation with connected equipment.
2.
Test devices and demonstrate operational features for Owner’s representative and authorities having jurisdiction, as applicable.
3.
Correct deficiencies until satisfactory results are obtained.
4.
Submit written copies of test results.
3.4
TRAINING
A.
Conduct on-site system administrator and security/surveillance operator training with the number of sessions and length of sessions as recommended by the video surveillance system manufacturer. Training shall include, but not limited to, camera administration, provisioning, configuration, operation, and diagnostics.
END OF SECTION
28 23 29-7