DoTile® is a trademark of: made in Italy MAGNITUDO
1
1. Place the squared section edges and the adjustable corners without tightening the screws.
2
2. Lay the rubber surface in the first side.
3
3. Lay the central wooden section.
4
4. Lay the rubber surface in the second side.
5
5. Use a rubber mallet to align the tiles and close the gaps.
6
6. Fix the first corner using the provided screws and flat washers.
METEM S.r.l. - via Le Canevare, 50 - 31100 Treviso -ITALY- Tel.: +39 0422 267010 - Mail: fit@dotile.it - www.metemsrl.com
pag.1/3

made in Italy MAGNITUDO
DoTile® is a trademark of:
7
7. Repeat point 5 and 6 since the complete fixing of all corners.
8
8. Fix the containment plates using the provided screws and flat washers
n. 2 squared section edges 30mm, thickness 2mm, length 2970mm n. 4 adjustable corners
150mm x 150mm n. 40 screws TPS EI
5x15 (closing with a
3mm hex key) n. 40 flat washers n. 2 squared section edges 30mm, thickness 2mm, length 2470mm n. 20 multilayer rubber tiles (dim.: 500 x 500 x
30mm)
METEM S.r.l. - via Le Canevare, 50 - 31100 Treviso -ITALY- Tel.: +39 0422 267010 - Mail: fit@dotile.it - www.metemsrl.com
pag.1/3

made in Italy MAGNITUDO
DoTile® is a trademark of:
Wooden surface
2500 x 1000 x 30 n.4 Locking plate
1 Pallet (rubber surface)
1050 x 1050 x 300 mm4 packages = 200kg
+
+
1 Package
3000 x 100 x 100mm
(25Kg)
1 Package (wooden surface)
2550 x 1050 x 100mm
75kg(25Kg)
Rubber mallet 3mm hex key
Make sure you have the tools before starting the installation.
METEM S.r.l. - via Le Canevare, 50 - 31100 Treviso -ITALY- Tel.: +39 0422 267010 - Mail: info@metemsrl.com - www.metemsrl.com
pag.3/3