Halo Owners Manual - D-TEC

advertisement
Halo
Owners Manual
Note: Don´t use sharp objects when unpacking the luminaire!
1. Unpacking Your Halo
Carefully open the packaging without using any sharp objects!
In the packaging you will find the following items:
• Wire arrangements for attaching the luminaire to the cieling. (4 pcs)
• The Halo Luminaire
• Driver box for mounting in ceiling
• Remote Control Unit and holder
1/3
Working countertop
2/3
Parallell position. The eyes of the patient should be in line
with 1/3rd of the luminaire.
!
Crosswise position. The eyes of the patient should be in
line with the top lightsource.
600 - 1200 mm
2200 mm
Note: Driver box should be mounted only in ceiling!
2. Positioning Your Halo
The height of the luminaire should be about 600 - 800mm above the working area.
3. Preparing the mounting of Your Halo
AFTER unpacking the luminaire you can use the packaging as a guide
for marking the attachment points in the ceiling.
• Use the front part of the packaging and punch holes with a screwdriver or similar.
• Position the cardboard lid where you want to mount the luminaire,
mark out the cieling points and drill your holes for the attachment.
334
365
380
Ceiling
attachment
Cap
Wire
Gripper
Alu nipple
Wire
Gripper
Push to release the wire
4. Mounting Your Halo in the ceiling
These items for mounting are provided with the luminaire. Use the one
suitable for your needs.
Working
countertop
5. Light conditions for surgery
Image of preferred light conditions for operation rooms.
Zone 1 = 20 000 - 30 000 LUX
Zone 2 = 3000 - 5000 LUX
Zone 3 = 500 - 1000 LUX
Caution! Fade out the lamp when working with light/curing
materials.
Working
countertop
6. Light conditions for examination
Image of preferred light conditions for examination rooms.
Zone 1 = 3000 - 5000 LUX
Zone 2 = 500 - 1000 LUX
• Power on/off
• Increase uplight
• Increase downlight
• Decrease uplight
• Decrease downlight
• Preset 1, 100% power
(For surgery)
• Preset 3, 10% power
(Dimmed light for use when
examining X-ray images)
• Preset 2, 50% power
(For use with light curing materials)
7. Operating Your Halo with the remote
control unit
The Halo luminaire is equipped with a remote control for all functions.
This remote control is delivered with a holder that could be mounted
on a wall, table etc.
45
611
Pos
Pos
1214
Antal Artikelnr./Material
Quant Article no./Material
Ytbehandling / Surface treatment
Modell namn/Model name
HALO_1200
Ändring
Denna ritning är Motor Innovations egendom
och skyddad enligt gällande lag samt får ej utan
vårt medgivande kopieras, delgivas annan eller
obehörigen användas. Överträdelse beivras med
gällande lag.
Motor Innovation
8. Halo dimensions
Datum
This document is the property of Motor Innovation.
It must not be copied and its contents must not be
imparteted to third person without our permission.
Infrigement ot the above vill be prosecuted
Motor Innovation
Benämning/Dimension
Designation/Dimension
Om ej annat anges gäller
If nothing else stated
Ra
Typ/Type
ASSEM
Om ej annat anges gäller
If nothíng else stated
SS-ISO 2768-1 M
EN ISO 13920-AE
Projekt nr./Project no.
Nr.
74
18
334
380
SKARPA KANTER B
SHARP EDGES BRO
Godk.
Motor Innovation
Mellanängsgatan 20A
S-431 44 Mölndal
Sweden
Benämning/Designation
HALO 120
DL
On-line support:
http://d-tec.se/support
• Bruksanvisning
• Manuel dutilisation
• Bedienungsanleitung
Facts: HALO H1200
• High power– 200- 3000 LUX/1,2M
• 90 -240 V
• 5500K RA90
• Dimmer switch
• Energy-saving.
• Remote control
• Size: 1214 x 611 x 45 mm.
• Weight: 13,5 kg
D-TEC AB
Varavägen 12
SE-465 94 Nossebro
Phone: +46 (0)31-96 93 02 Fax: +46 (0)31-96 60 92
E-mail: mailbox@d-tec.se
www.d-tec.se
Copyright 2012 D-TEC AB
IM18
Download