TD3 Hybrid Health Check
Quick Start Guide
TOYOTA MOTOR EUROPE
TOYOTA
1
Hybrid Health Check
Before you start !
This quick start guide contains BASIC instructions . It is important to fully
familiarise yourself with the test procedures before you start . If you are
unsure on any points. Seek assistance!
The Hybrid Health Check (HHC) function in TD3 is Role and Condition based.
If the role and condition criteria are not met you will not be able to access the HHC
functions.
1. You must have the correct role. (See Role matrix slide)
2. An appropriate vehicle must be connected to TD3 via
GTS diagnostic tool.
3. VIN must be validated in TD3
4. TOYOTA Prius 2-3 & plug-in, Auris Hybrid models are
now included
5. Lexus Models will be included in the spring of 2013
TOYOTA MOTOR EUROPE
TOYOTA
2
Roles Matrix
Production: Roles enabled for HHC access
O = Enabled
X = Not Enabled
R= Read Only
TOYOTA MOTOR EUROPE
TOYOTA
3
Safety
Before you start !
1. Familiarise yourself fully with the complete HHC procedures
before working on a vehicle !
2. Observe safety precautions in the workshop whilst conducting
the HHC tests!
3. Pay particular attention to the hybrid battery insulation test.
This is a full throttle load test and requires constant attention
by the tester!
TOYOTA MOTOR EUROPE
TOYOTA
4
Hybrid Health Check (1)
1. Enter and validate VIN
2. Connect to vehicle
3. Open vehicle status check
Hybrid Health Check (2)
Note that the vehicle status
check has two new fields.
1. Hybrid Health Check reports
2. Hybrid Health Check
3. Select Hybrid Health Check
to open the HHC.
Hybrid Health Check (3)
You are now ready to start the HCC.
Please follow the instructions carefully for each step.
Click the start button to begin.
You May need to wait for the DTC
check to complete.
The start button remains black until
the DTC check is complete. Then it
turns green.
Hybrid Health Check
Follow the on-screen
instructions for each
test.
Hybrid Health Check benefits
Service Marketing Tools
• Customer retention
• Builds confidence in used
vehicles
• Upsell potential in test
failure
Workshop
• Adds value to hardware
investment.
• Not just “a diagnostic tool”
• Benefit sales/after sales
End