Street lighting luminaire KAOS Registered model NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) Kaos is available in a wide range of solutions, capable of meeting all the vehicular traffic and residential street illumination requirements. Kaos is available in two sizes, with four different types of optics, and two cover alternatives, die cast aluminium and technopolymer. Kaos 1 for SHP and MHL lamps up to 150W and CPO lamps up to 140W*. Kaos 2 for SHP and MHL lamps up to 400W and CPO lamps up to 140W*. NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) *All the maximum powers shown are for ST optics. KAOS | TECHNICAL DATA SHEET | 2 KAOS MECHANICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS 1 Support frame in die cast aluminum alloy UNI EN 1706, RAL 7035. • Insulation class: I, II. 2 Top cover in technopolymer or die cast aluminum alloy UNI EN 1706 , RAL 7021. • Ferromagnetic power supply unit, efficiency EEI = A3. 3 EPDM or silicone seal. 4 Closure screen in flat tempered glass (4mm thickness) featured by high transparency and optimum thermal and mechanical resistance (IK09). • Available dimming options: • Integrated on-load switch for luminaries in class II. • Power supply: 230V - 50Hz. • Anti-burst capacitor. • Ceramic lamp holder. • Superimposed pulse ignotor with timer upon request. • Power factor: > 0.9 (at full load). • Wire connection for cables featured by a maximum cross section of 4mmq. 9 5 Optical unit in pure anodized and polished aluminum (99.85%). 2 6 Technopolymer gear plate removable without tools. 3 7 Membrane grommet. 8 Fixing system in die cast aluminum alloy UNI EN 1706. 5 9 Stainless steel lock and spring. 10 Regulation of the lamp focus in 6 different positions. IP66 protection degree. 1 10 4 6 8 7 NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) KAOS | TECHNICAL DATA SHEET | 3 211 Available versions Ø 60/76 KAOS 1 KAOS 2 692 692 228 228 211 211 626 626 Ø 60/76 Ø 60/76 408 379 228 692 Ø 60/76 626 WATTAGES 50 W 70 W 100 W 150 W 692 LAMP TYPE SHP-T SHP-T SHP-T SHP-T KAOS 1 LAMP HOLDER E27 E27 E40 E40 OPTIC ST ST ST ST 50 W 70 W 100 W 150 W MHL-E MHL-E MHL-E MHL-E E27 E27 E27 E27 ST ST ST ST 45 W 60 W 90 W 140 W CPO-TW* CPO-TW* CPO-TW* CPO-TW* PGZ12 PGZ12 PGZ12 PGZ12 ST ST ST ST 50 W 70 W 100 W 150 W CDO-TT CDO-TT CDO-TT CDO-TT E27 E27 E40 E40 ST ST ST ST WATTAGES 150 W 250 W 400 W LAMP TYPE SHP-T SHP-T SHP-T KAOS 2 LAMP HOLDER E40 E40 E40 OPTIC ST ST ST 150 W 250 W MHL-E MHL-E E27 E40 ST ST 250 W 400 W MHL-T MHL-T E27 E40 ST ST 140 W CPO-TW* PGZ12 ST 150 W 250 W Cdo-tt Cdo-tt E27 E40 ST ST For CDO-TT lamps, please, order SHP wiring. *Only available with electronic power supply unit. For CDO-TT lamps, please, order SHP wiring. *Only available with electronic power supply unit. NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) KAOS | TECHNICAL DATA SHEET | 4 KAOS optic AVAILABLE OPTICS ST: asymmetrical optic for street lighting. OC: asymmetrical optic for pedestrian and cycle paths lighting. OP-DX: Right asymmetrical optic for pedestrian crossings ST 250W SHP-T Gamma Angles 180 105 120 60 105 90 75 60 90 60 75 120 60 180 45 45 240 300 cd/klm KAOS 30 15 0 15 30 Coordinate system C-Gamma, polar graph. Street lighting lighting. OP-SX: Left asymmetrical optic for pedestrian crossings lighting. In the street version (ST) it is possible to adjust the lamp focus placing the reflector in different positions. This allows to vary the photometric asymmetry in order to optimize the light beam according to the road width. Please, download Kaos photometric data at www.aecilluminazione.com NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) KAOS | TECHNICAL DATA SHEET | 5 K aos - B r a c k e t s 768 Ø 60 155 Ø 102 MK/K BRACKET 1592 768 Bracket in hot-dip galvanized 155 Ø 89/102 Ø 60 steel tubular Ø 60mm. Ø 102 stainless steel AISI 316. Ø 102 Cable rod support ring for Ø 60 Double top cable rod in 913 Ø89/102mm in hot-dip 2091 galvanized steel. 1592 Ø 89/102 Fixing system in hot-dip Ø 89/102 galvanized steel for PK - PN PA - EC poles Ø 102mm. Ø 60 Ø 60 Ø 102 Ø 102 Stainless steel screws. 1412 Projection: 155mm - 913mm - 913 1412mm. Compositions: - Groups of 1-2-3 brackets. MK/K MODEL COLOUR STANDARD COMPOSITIONS MK-K 1.02 MK-K 1.10 MK-K 1.15 MK-K 2.02 MK-K 2.10 MK-K 2.15 MK-K 3.02 MK-K 3.10 MK-K 3.15 NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) GRAPHITE (CODE 01) KAOS | TECHNICAL DATA SHEET | 6 K aos - B r a c k e t s 1560 947 Ø 60/70 MB/K BRACKET 1525 Ø 60 Bracket in in hot-dip galvanized steel tubular Ø 60mm with decorative cover 912 in moulded aluminium. Ø 60/70 Post top mounting system for poles Ø 60 - 70mm. Device inserction: Ø 60mm. Stainless steel screws. Projection: 912mm Compositions: - Groups of 1-2-3 brackets. MB/K MODELLO COLOUR STANDARD housing and BRACKETS fairing COMPOSITIONS MB-K 1.10 MB-K 2.10 MB-K 3.10 RAL 7035 (CODE 05) RAL 7021 (CODE 06) NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) KAOS | TECHNICAL DATA SHEET | 7 Installation examples For more information about AEC Pole Division poles, please, consult the catalogue “The Best in Pole Design”. NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) PK PK PK KAOS | TECHNICAL DATA SHEET | 8 NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) The information contained in this catalogue aren’t binding. In order to guarantee a continuos updating of its products, AEC reserves itself the right to modify the contents without notice. AEC Illuminazione Srl I-52010 Subbiano - Arezzo - Italy Via Righi, 4 - Zona Industriale Castelnuovo Tel. +39 0575 041110 Fax +39 0575 420878 aec@aecilluminazione.it www.aecilluminazione.com