SONITROL
Security System
Training
Arming the system
Security is OFF
select security mode
Occupied
On
• This is the SONITROL keypad. It is in the
“OFF” mode
Arming the system
Security ARMING
SECURE
is OFF
select
enter
security
your code
mode
Occupied
push ENTER when done
On
•
To start the “arming” process, press the
button below “On”. The screen will change.
Arming the system
SECURE ARMING
Security
is OFF
Verifying
enter your code
Please
push ENTER
wait when done
• Enter your “Access code” (4-digits) and your
PIN (3-digits), then press “enter”.
Arming the system
Security is OFF
Verifying
Please wait
• The system is doing a self check.
• WAIT…………….
Arming the system
Security is ON
030 seconds to exit
028
026
024
022
020
018
016
014
premises
• New Screen • Beeping • Red light flashing
• 30 seconds to leave!!!
Arming Questions?
Disarming the system
Security is ON
• This is the SONITROL keypad. It is in the
“ON” mode. •The red light is flashing
Disarming the system
Security is ON
enter your code
push ENTER when done
• Once the door is opened, the screen will
change to look like this.
Disarming the system
Security is OFF
ON
select
enter
security
your code
mode
Occupied
push ENTER when done
On
• Enter your “Access code” (4-digits) and your
PIN (3-digits), then press “enter”.
Disarming the system
Security is OFF
select security mode
Occupied
On
• The SONITROL system is in the “OFF” mode.
• Success!!!
Disarming Questions?